Ubuntu :: 10.10 (64) Hangs On Boot With USB Card Reader
Apr 18, 2011
My PC is an Intel Core-i7-950 with 8GB RAM. The motherboard is an Intel Extreme, DX580G. Ubuntu (64) 10.10 is the only OS run on this system, and uses the entire hard-disk.
Today, I purchased an internal USB card reader that connects to the USB socket on the motherboard. Once I connected it, the PC started hanging on boot. When it hangs, there is nothing but a non-blinking, still cursor on the top left corner of the screen.
Earlier I had set the Grub2 boot delay to '0', and therefore I guess I do not get to see any messages or the Grub2 menu.
The story is the same with an external USB card-reader. If I connect the external card-reader and try to boot, the PC hangs in the manner described above.
If I disconnect the internal / external USB card-reader, everything is normal.
The following web-page describes the problem in the manner I can understand. But it does not provide a permanent solution.
[URL]
View 5 Replies
ADVERTISEMENT
Jan 20, 2010
Looking for a card reader/writer that will support most current card types. I am running Fedora 12 x86_64 on a home-grown desktop. Are there any gotchas, that I need to watch for?Also, Internal vs. external, any benefits of one over the other, or is it just personal preference?
View 5 Replies
View Related
Dec 6, 2010
I have all of my music on an SD card so it doesn't take up space on my hard drive. I put it into my SD card reader and ubuntu is all like, "gtfo doesn't exist."
View 2 Replies
View Related
Mar 30, 2011
I have installed Ubuntu 10.10 in my system. I have plug in th USB card reader but it is not detected. Eventhough the same card is detected when I'd pluged in at last night and I have just browse the folders in the memory card.Then I just right click on the icon in media folder and click eject the texts in file /var/ log/messages for above operation.
View 2 Replies
View Related
Feb 25, 2010
My multimedia card reader does not work with new ubuntu version fresh install:
lsusb says:
Code:
Bus 001 Device 002: alcor micro corp. multimedia card reader
dmesg:
Code:
[6.544269] usb-storage: device scan complete
[6.544848] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[6.545482] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[6.546102] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[6.546728] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[6.547227] sd 2:0:0:0: Attached scsi generic sg2 type 0
[6.547338] sd 2:0:0:1: Attached scsi generic sg3 type 0
[6.547439] sd 2:0:0:2: Attached scsi generic sg4 type 0
[6.547550] sd 2:0:0:3: Attached scsi generic sg5 type 0 .....
View 2 Replies
View Related
Jul 30, 2010
My girlfriends laptop (Acer Aspire 5536) has an internal memory card slot, however Ubuntu doesn't seem to be recognising it.
[Code]....
View 5 Replies
View Related
Jun 16, 2011
lsusb output:
Bus 005 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Bus 003 Device 002: ID 046d:c313 Logitech, Inc.
[Code]...
View 3 Replies
View Related
Jun 28, 2011
I can't seem to get my card reader to work. The USB port on the reader works and sometimes I can read my SD card. Usually, nothing shows up in the media/ folder. I looked at this write-up [URL]... but I'm not sure if this is what I should do. Here are some info I was able to pull up:
sg_scan -i Code:
/dev/sg0: scsi0 channel=0 id=0 lun=0 [em]
HL-DT-ST DVD-RAM GH22NP20 2.00 [rmb=1 cmdq=0 pqual=0 pdev=0x5]
/dev/sg1: scsi0 channel=0 id=1 lun=0 [em]
[Code]...
View 7 Replies
View Related
Jul 15, 2011
When using Smargo+ card reader with Ubuntu 10.04 server, I get the following error when starting up binary using smargo.
Code:
ERROR, function call SR_Init(reader) returns error.
It seems to be a USB problem related to the Smargo+ card reader.
View 1 Replies
View Related
Jun 24, 2011
I got an USB multi card reader that supports SIM card as well, but I can't find a s/w to make it work, I plug it into the PC with SIM but nothing happen,
View 2 Replies
View Related
Sep 1, 2010
I have installed Ubuntu 10.04 32 bits version on a desktop PC. Every thing works OK, exept for a USB hub and card-reader combination from IN-WIN Inc. I could not find a clue on the Internet.
The manufacturer and apparatus code is: ID 10df:0500 (as from "lsusb").
Below I have listed all the hardwire of the PC, as obtained from "lshw". The italic part at the bottom deals with the IN-WIN module. I suspect that it may have to do something with the "emulated scsi-host" thing, of which I just know nothing about.
JGMS:
View 2 Replies
View Related
Apr 8, 2011
i don't see my sd card reader ?(under xp this card reader "works" but don't read datas ?)
hwinfo give
57: SCSI 00.0: 10600 Disk
[Created at block.254]
[code]...
View 14 Replies
View Related
May 19, 2010
I just bought a new Nikon S570 digital camera and I was trying to mount the camera via the USB cable in order to get the pictures off of it but either a) I don't know how to mount the camera properly or b) there is some sort of compability or program that I need to install in order to get it to work. According to lsusb it the camera shows up as being connected:
Code:
Bus 004 Device 003: ID 05ac:8213 Apple, Inc.
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 05ac:0236 Apple, Inc.
Bus 003 Device 002: ID 05ac:8242 Apple, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 04b0:0319 Nikon Corp.
Bus 002 Device 003: ID 05ac:8403 Apple, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05ac:8507 Apple, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
So maybe i just need to know how to mount it so I can access the files?
Also, I tried to plug the SD card into the built in card reader but it never showed up either. Do I need to do anything different to get the SD card to mount too?
View 1 Replies
View Related
Aug 27, 2010
This is the issue, and I have had this happen with a few card readers. I have a Alfa Usb Wifi adapter model number AWUS036H using the rtl8187 Chipset. It works fine, unless I plug in my flash card reader directly to the board. If I plug it in to a hub it works fine until I put a card in, I was also having the same issues using a USB Video Capture unit by the name of EASYCAP. This was also happening in XP. Must be some driver conflict of sorts.
View 1 Replies
View Related
Apr 9, 2010
I am very new to Linux. I installed ubuntu 9.10 on my Acer 3050 aspire. It works very well except for a few issues. I can not use my 5 in 1 card reader, nothing shows up in "computer" except "cd/dvd" and "file system". My lg phone does not show up when using my data cable as mass storage, and the touch pad is too sensitive, (i have adjusted the settings listed under mouse/touchpad but to no avail. The biggest problems is the card reader and phone. Can this be fixed?
View 14 Replies
View Related
Apr 3, 2011
I'm using 10.04 and it's been excellent all the way through up until this problem happened. My laptop's built-in SD card reader has stopped working out of nowhere.
Here are the basic facts:Laptop is a Compaq Presario CQ50-115NR I tried older Linux Kernels, it's not the newest kernel causing the problem. The SD card reader is not shown in disk utility anymore. It used to be shown, even when no SD card was inserted. Now? Nothing.lspci output:
Code:
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation Device 075e (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
[Code]...
View 1 Replies
View Related
Jul 13, 2015
I have a Thinkpad X220 (stretch/sid) with a built-in SD card reader.But when I plug in an SD card it won't show up in the file manager (thunar), nor as a /dev/sd* or /dev/mm*.. URL...
Code: Select all$ udisksctl status
Just my internal SSD shows up.How do I get my SD card reader to work?
View 5 Replies
View Related
Jul 18, 2011
Stuck an SD card into my laptop (acer timelinex 5830tg) for the first time today, and to no avail. I've done an lspci, but don't seem to see my card reader there. here's the output
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family HECI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation Device 1050 (rev a1)
02:00.0 Ethernet controller: Atheros Communications AR8151 v2.0 Gigabit Ethernet (rev c0)
03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
I'm running kernel 3.0-rc6. Issue still remains when booting into 2.6.39 also.
View 14 Replies
View Related
Aug 4, 2011
I've recently purchased a Lenovo Ideapad z470, and installed Debian Wheezy amd64 on it first thing. I was pleased to find that almost everything worked "out of the box." The only problems were the hotkeys and the card reader. I don't care if the hotkeys ever work, but the non-working card reader is more aggravating than I anticipated. I would be most obliged if anyone could lend a hand.So, first things first, here's the output of uname -a:Linux cerulean 2.6.39-2-amd64 #1 SMP Tue Jul 5 02:51:22 UTC 2011 x86_64 GNU/LinuxHere's the syslog output upon inserting an sd card into reader:
Jul 25 22:19:45 cerulean kernel: [11472.262103] usb 1-1.3: new high speed USB device number 4 using ehci_hcd
Jul 25 22:19:45 cerulean kernel: [11472.354801] usb 1-1.3: New USB device found,
[code]....
View 6 Replies
View Related
Dec 9, 2009
I could use some instructions on how to get firefox to read and use my cac card. Under Yast the card reader shows up in hardware. I have install pcsc ccid and coolkey through Yast but not sure if I need to do anything else. I have followed instructions for loading the device in firefox but it does not load my certs off of the card.
View 8 Replies
View Related
Jan 10, 2010
I just did a fresh install of OpenSuSE 11.2 for my fiancee on her new HP Mini 110-1030NR, and everything works great, except for the 5 in 1 card reader. Here is the information I believe you may find relevant:
Kernel
2.6.31.5-0.1-desktop
Output of lspci:
Code:
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2)
00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series]
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
View 8 Replies
View Related
Mar 4, 2011
I'm using USB 3G modem and it has SD card reader embedded.
I am also using USB hard drive as boot device. It is a Netgear WNDR 3700 router.
I am posting it in here because it is a general question, not really associated with embedded installations.
When loading the system from power up my HDD get's /dev/sda assigned and my modem SD card reader: /dev/sdb [although there's no SD card inserted].
But when booting after restart hard drive is sdb and modem is sda. Thanks to that I get kernel panic and all is over. I have to manually reboot.
I cannot use initrdfs so I can't use UUID/LABEL to identify the device.
Is there any way I could stop this SD card reader from loading?
I believe it uses usb mass storage driver, just as my hdd.
This is from the boot log Code...
View 2 Replies
View Related
Apr 16, 2010
I have a new computer with with an SSD internal drive, built in SD card reader, and USB expansion ports.If I populate media in all slots and type "fdisk -l" I get a listing of the partitions for the external USB ports but fdisk doesn't report anything for the internal media. If I unplug the USB drives and type fdisk it just goes to the command line. If I type "df" it locates the partitions for the internal SSD drive but doesn't report anything for the media in the built in reader. If I type "mount" the same thing.
I've looked in /dev/ but I can't find anything that looks like something I can mount. I'd expect something like sda1 or something similar but it's not there. The contents of /media/ do report something called "card" but going there and typing "ls" doesn't get me any result. There is also an entry for "mmc1" but it too doesn't report anything.
View 3 Replies
View Related
Jan 24, 2010
I have a netbook (MSI Wind U100 rebrand) that has one of those card readers built into the handrest. The thing is I've never used it once, and it keeps popping up in powertop as waking the cpu when it should just shut up and be quiet.Aside from breaking open the case and tearing it out, the immediate solution is to browse to /sys/bus/usb/devices/usb1/1-6/ and pipe 1 to the file remove. That disables it until system reboot or resume, at which point I have to do it all over again.
Code:
$ echo 1 | sudo tee /sys/bus/usb/devices/usb1/1-6/remove
Now I'd like to create an udev rule to make it not get initialized at all. A quick Google search found me this article on creating udev rules, and after toying about with the udevadm tool I managed to produce the attributes/properties of the device.
Code:
zorael@lethe:/sys/bus/usb/devices/usb1/1-6$ udevadm info -a -p $(pwd)
Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device.
looking at device '/bus/usb/devices/usb1/1-6':
KERNEL=="1-6"
SUBSYSTEM=="usb"
DRIVER=="usb"
ATTR{configuration}=="CARD READER
[code].....
View 2 Replies
View Related
Apr 11, 2010
I have this card reader, it works perfectly on Win7, but when i try to put my xD card in it whilst on Linux, it wont read it, nothing shows up in nautilus nor on the desktop. If it's any use, it's an external, with a USB cable.
View 2 Replies
View Related
Jan 3, 2011
I have installed ubuntu 10.10 netbook remix on my eMachines 350 netbook.. so far, it works good aside from the printer and the built-in SDcard reader.
1. I have tried installing the database driver for epson( dot-matrix printers) but i was out of luck until i have installed the SCP(sorry if I forgot/misrepresented the name) driver which made my printer working.. However, the print quality is a total mess.. broken letters and etc.. (ribbon is brand new) Can someone tell me how to solve this?
2. Having said that I finally solved issue #1, and the printer prints the way it should be, how would I configure my netbook to print wirelessly via a wifi router.. (I was able to do this with windows computers wherein a printer is shared on the network) however, I find it hard to do this in ubuntu since I am not that familiar with this. Note that when I go to system>admin>printing it shows the windows 7 computers in the homegroup but when I search for a shared printer, nothing shows up.. (I know, I'm a NOOB!)
3. This is the last one, I would feel great if we could at least solve this together.. the built in CARD READER is not working on my eMachines EM350 netbook..
View 1 Replies
View Related
Jan 29, 2010
I have successfully installed Ubuntu 9.10 on an HP Pavilion laptop (dv6130US)Although I have not checked everything out, I believe the only hardware issue I have (so far) it getting the media card reader to work.I used the lspci command to determine if the memory card was recognized and got the following response (I've only copied what I believe to be the relative info)05:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C8321394Controller05:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)05:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)05:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05)05:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)I then created a directory in /dev called mcr sudo mkdir /dev/mcrand created a directory in /media called mcrsudo mkdir /media/mcrI then tried to mount the cardreadersudo mount /dev/mcr /media/mcrbut I got the following errormount: /dev/mcr is not a block device
View 3 Replies
View Related
Aug 7, 2010
I found a solution to my card reader problem in a another fedora post but when I type the code in terminal I get:
all config files need.conf /etc/modprobe.d/blacklist
How to write this code so I wont get this error and I can load these modules and also how to edit the modprobe.conf.
The code is below, using fedora 13.
You must load these two modules to work with card reader.
First : Remove the card from the Reader!
AS superuser type in console :
1. /sbin/modprobe tifm_core <enter>
2. /sbin/modprobe tifm_sd <enter>
If you want to automate these modules loading do the following :
edit the /etc/modprobe.conf file
add these :
alias mmc_core tifm_core
alias mmc_card tifm_sd
View 2 Replies
View Related
May 10, 2010
I just installed opensuse 11.2 on my laptop in a dualboot configuration with windows 7.I prefer using suse, but also recognize, that once in a while, windows is useful.One of the things i like to do in linux is handle my photos with f-spot/gimp, but for some reason my laptops built in card reader is not recognized by the system. If a card is inserted, it doesn't even show up in the partition manager..?I'm not completely new to linux, but i'm not an advanced user either, so i can't figure out what to do here
View 5 Replies
View Related
Dec 11, 2010
I am trying to disable the built-in card reader in my MBP (5,3) running Debian testing. I've noticed that powertop lists the card reader as a major contributor of wake up events and would like to disable it as I rarely need to read SD cards.
I found this with "dmesg":
scsi 6:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0
and this from "sg_scan -i":
/dev/sg2: scsi6 channel=0 id=0 lun=0 [em]
APPLE SD Card Reader 1.00 [rmb=1 cmdq=0 pqual=0 pdev=0x0]
I don't know where to find the device in /proc and there are no modules loaded for this device (I'm guessing it has support compiled into the kernel).
So, ideally, I would like to be able to enable/disable this device without a kernel recompile. Is this possible?
View 1 Replies
View Related
