The disk on this machine was full (0 bytes available). I rebooted and now it just goes to a blank screen. I thought I might need to free up some space for something, so I booted to a live cd and freed up some space. Still boots to a blank black screen.
View 4 RepliesI've recently begun to have the problem of whenever a flash video in Firefox 4.0 goes in full screen mode, the screen goes black and my laptop is unresponsive. However, the video's sound will keep playing.
View 2 Replies View RelatedThis obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
View 9 Replies View RelatedI attempted to do the upgrade from 11 to 12 with the Preupgrade Assistant. Unfortunatly something went terribly wrong. Everything went well, excluding the size of partition error, untill the reboot. I did have to remove two previous installs. Now grub gives me an option to upgrade to Fedora 12. When I select this the screen runs code quickly and the screen goes blank with alot of disk activity. Then nothing. Is there a method of recovering this install? I am fairly new to Linux Administration and I am just knowledgable enough to mess things up.
View 1 Replies View RelatedI am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View RelatedIn Ubuntu 9.04 and 9.10, KTorrent worked just fine for me. However, this time whenever I launch it, it is for some reason full screen and I have no idea how to get out of full screen.it's of the entire screen when KTorrent is in focus (so no panels or other things were cut out of the image).URL...
View 4 Replies View RelatedI'm running mythbuntu 9.04 and am having an issue with disk space.
I try 'rm' various log files but the space I free up lasts less than a minute before the disk reports as being full once more.
df -Th | sort gives:
Quote:
/dev/sda1 ext3 8.3G 7.9G 0 100% /
/dev/sda6 ext3 138G 125G 6.3G 96% /music
/dev/sda7 xfs 783G 617G 167G 79% /videos
/dev/sdb2 xfs 344G 242G 103G 71% /recordings
[Code]....
There's nothing enormous in /var/log and my trash and the root trash are empty.
why size and used fields are not the same despite 100% usage being reported on sda1..
When i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
is there anyway to automatically disable screen saver whenever I watch video in full screen?
View 1 Replies View RelatedI have windows installed through virtual Box now but i have some questions. When i make it full screen it goes full screen but Windows stays in the middle of the screen small and doesn't adjust to the full screen. Can you make windows completely take up the full screen Can i access folders on my ubuntu drive ? i have a file in downloads i want in windows but don't want to reinstall it
View 4 Replies View RelatedIs there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies View RelatedThe day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
i'm having issues in trying to copy files from one hard drive to another. The destination disk is not full yet I get the message "Error creating directory: No space left on device".
View 4 Replies View RelatedI'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
I fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.
View 4 Replies View Relatedlike any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
I recently upgraded my graphics card from a Geforce 7600GS to a Gefore 560Ti. And while most things are normal, during boot up my screen isn't "full screen" until X is started, after which everything else is fine. Essentially, all display, the grub menu, the splash screen, console text, etc, is within a box on the screen, with 2" on the left and right, and 1" top and bottom of empty blackness.
From what I understand, this is because the framebuffer is using the wrong resolution, but the maximum resolution that hwinfo --framebuffer returns is 1280x1024 (which I am already using "0x031a".) (My monitors is natively 1920x1080) Is it possible to do something about this? If not increase resolution than at least stretch the screen to full screen?
sudo /usr/sbin/hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.GGyCBArXznD
Hardware Class: framebuffer
Model: "NVIDIA GF104B Board - 10400050"
[Code]...
OpenSuse 11.3 with nVidia drivers.I have the screen working fine though it only runs in 1600x1200@75 using the nVidia driver (GTX260 card).When I play a game in full screen mode all seems OK but when I exit the game then I just get the mouse pointer on a black screen.There must be something present since the cursor changes as I move it, normal pointer -> hand over a link etc. It's just that black on black isn't very readable.
View 5 Replies View RelatedI have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
I'm on 10.04. Cloning a vdi yesterday, I managed to produce a 'disk is almost full' message. Deleted some movies and wanted to try the cloning again today, but starting my laptop, I get an ugly gray login screen.When I login, it looks almost good (some console writing to fast to read) but then it falls back to login informing me 'Install Problem: The configuration defaults for GNOME Power Manager have not been installed correctly."
View 1 Replies View RelatedSo i just installed ubuntu server 8.04. Got everything set up and started putting my files on it. 6 Hours of copying later I get a message saying that my Disk is full. This is a 1.5TB HD and it stopped copying at 269GB. fdisk shows the drive as 1.5TB, and ls -sh shows that only 269GB have been used. Yet I cannot add any more files. The other weird thing is that df doesn't show the hard drive, yet I know it is mounted and accessible. If it makes a difference I have it formatted to ext3.
View 2 Replies View RelatedI can't seem to fin the command that tells how much space is used/free.
View 5 Replies View Relatedwe have installed centos in our organisation on vitual box.it gives display only in the middle of screen.i want to set it on full screen. when i select full screen option the back black screen become full but the display is same. how can i adjust it on full screen?
View 2 Replies View Relatedi have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View RelatedI am trying to upgrade to 9.10 but it fails because the disk is full. I am running a Dell Mini with 16GB SSD...so there isn't a lot of free space to begin with. Added to that, I have some hefty applications (rosegarden, audacity, skype, etc) which I kind of need. Am I better off just sticking to 9.04? Are there any good ways to clean up the system and get rid of stuff that might be sticking around? I did apt-get clean and it didn't clean enough.
View 6 Replies View RelatedI am using default USB Startup disk creator for spreading new versions of ubuntu on all my machines. In 10.04, I point it to GnomeLiveCD of 600Mb, and usual 4Gb flash drive. And the application says I have not enough space.4Gb is empty, fresh formatted, with right partiion. It is OK in short. Do somebody know what to do with app?
View 3 Replies View RelatedI am having trouble with my HDD.
Here is how Disk Usage Analyzer looks like:
But I can not find any files there to delete.
Trash is also clean.
I downloaded the Lubuntu iso from http://lubuntu.net. It is 521MB.How much disk space would a full install use? 2GB? 3GB?
View 3 Replies View RelatedFor some reason I can't find any documentation re: the algorithm(s) used by Ubuntu to encrypt the filesystem... Anyone know what it is?? AES?
View 2 Replies View Related