Ubuntu :: 10.04 CD Mount Error In Boot Cycle?
May 26, 2010
I just upgraded from 9.10 to 10.04.Now, when I boot up, I encounter an error in the boot cycle "An error occurred while mounting /media/cdrom0" "Press S to skip mounting or M for manual recovery"Pressing S does work to get me through the cycle and does not affect CD-ROM use once the OS loads. How would I find out what is causing the error or is there a safe way to stop it from trying to mount a drive with no media in it?Quote:GNU nano 2.2.2 File: /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
View 1 Replies
ADVERTISEMENT
Aug 31, 2010
i updated the compiz fusion plugins and decided to try some out, and when i tried the reflected windows, it logged me out and i had to log back in. but now as long as it's active, i can't login long enough for me to disable it, Edit: nvm, i managed to fix it. login under Failsafe GNOME session, and it'll be in safe mode, with all add-ons disabled, so you can manually turn them off
View 1 Replies
View Related
Mar 23, 2010
I have recently been unable to boot into windows xp, which is on a drive separate from my linux installation. When I select the windows installation, the computer starts back at the bios screen and returns to grub endlessly. I am running an updated 9.10. The linux will boot fine; however the most recent kernel does not show up on the list of available options, which may indicate something. I have searched the forum and found nothing that helps. There are plenty of posts asking if you have stopped using windows altogether and other non tech related posts though.
The results of sudo fdisk -l are below:
View 7 Replies
View Related
Jan 26, 2011
When I boot one of my machines, it gets as far as GRUB, then proceeds to a blank screen for a second, and then repeats the cycle all over again - ad infinitum. I have tried previous kernels on the list with the same results Also, I cant boot into recovery mode either.
I have run Memtest successfully from the GRUB options and no errors appear in the results. I have tried booting from a Live CD and here I get as far as the "OS choosing screen". When I then select one and hit Enter, the screen goes blank and the machine reboots as before.
View 5 Replies
View Related
Jul 3, 2011
I installed Ubuntu 11.04 and it refuses to show me a boot menu so I can select single user mode. When it does boot, it continues to cycle as X11 fails, but will not let me change into any of the consoles via control+shift+1-7 or control C or any command. X11/GDM continues to cycle as I hear my video card keep spinning up and down. In every version prior, after 3-4 fails it would give you a shell and say, ok it failed. how to boot into single user mode or escape out of this GDM/X11 fail cycle?
View 1 Replies
View Related
Nov 30, 2010
I did upgrade my Ubuntu on 10.10 and had always a Dual-Boot with Win7. After the install of Ubuntu, my grub wouldn't work anymore. I could only boot into Ubuntu, but GRUB didn't even appear. I already tried but this brought only the installs for Ubuntu and GRUB didn't start. Afterwards I tried to recover my MBR with the help of my Win7 DVD, but this didn't work out too. Now I can't boot neither Ubuntu nor Win7 and have to run from the Live-CD. I also tried to fix it with but setup(hd0) only returned, Error 17: Cannot mount etc. What can I do? I need my Windows for work and I don't want to reinstall neither Ubuntu nor Win7. Output of fdisk -l gives:
[code]...
View 3 Replies
View Related
Mar 31, 2010
XP Pro SP3
Ubuntu 9.10
Kubuntu 9.10
Tri-booting. They were installed in the order I listed above. I ran into a few bugs with Kubuntu, so I no longer want to use it. I want to use GParted on a LiveCD to format Kubuntu and expand my Ubuntu home partition to sit on top of Kubuntu's space right now. If I nuke Kubuntu, will Grub still exist with my Ubuntu/XP entries to boot?
View 4 Replies
View Related
May 6, 2010
Unable to mount NFS server on the client.
Getting the following error.
mount: RPC: Remote system error - Connection timed out
View 3 Replies
View Related
Apr 28, 2010
I was running 11.0 and it stalled in the middle of a number of updates. On reboot I now get (if I remember correctly) Error 15: File not found.I managed to get my hands on a 11.0 live cd and started trying to fix grub. However, when I try mounting the harddrive using "mount /dev/sda1" I got
Code:
can`t find sda1 in /etc/fstab or /etc/mtab
"mount /dev/sda1 /mnt" gives
[code]...
View 5 Replies
View Related
Jul 26, 2010
mount: error 6 mounting ext3pivotroot: pivot_root (/sysroot, /sysroot/initrd) failed:2Remounting defs at correct place if necessaryMounted defs on /devFreeing unused kerbel memory: 272k freedKernel panic: No init found. Try passing init=option to kernel
View 1 Replies
View Related
Feb 19, 2011
Okay, so on occasion when I boot into ubuntu I get this error
[mount: mounting /dev /root/dev failed: no such file or directory]
[mount: mounting /dev /root/sys failed: no such file or directory]
[mount: mounting /dev /root/proc failed: no such file or directory]
[code]...
I get the error when I open any of the kernel versions or any recovery mode. Ubuntu 10.10 Desktop is the only OS installed on the computer, which is a Lenovo S10-3. I can eventually get it to go away, sometimes by repeatedly unplugging it and plugging it back in, and sometimes I will boot into GParted, do nothing, then restart and it will work.I have found some solutions online, but all of them involve the error happening as a result of dual booting with Windows.I have made no major system changes recently, so I can't see anything like that being the problem.
View 3 Replies
View Related
Feb 5, 2010
i am trying to compile kernel 2.6.23 on Fedora 12 After fixing a few bugs (getline error, %dil ,etc) i was able to compile the kernel made initramfs img using dracut updated grub and then booted up the new kernel 2.6.23 but it fails to boot with following error mount: unknown filesystem type 'ext4'
View 8 Replies
View Related
Sep 10, 2010
When I run lilo (/sbin/lilo), it messes up my /boot partition. Next time I try to mount it after running lilo, I get an error: "mount: Stale NFS file handle" (I define -t ext2). My /boot partition is ext2, mounted locally, and not nfs. Then I do fsck /dev/sda1, and I get several: Free blocks count wrong for group #0 (7665, counted=5063). Fix<y>? I say yes to all and it works normally afterwards. This happens only after I run lilo. Lilo is installed in MBR.
Here is relevant configuration:
Code:
root@darwin:/home/cabrilo# cat /etc/lilo.conf
append=" vt.default_utf8=0"
boot = /dev/sda
bitmap = /boot/slack.bmp
bmp-colors = 255,0,255,0,255,0
bmp-table = 60,6,1,16
bmp-timer = 65,27,0,255
prompt
timeout = 30
change-rules
reset
vga = normal
image = /boot/vmlinuz
root = /dev/sda3
label = Linux
read-only
This is my partition table:
Code:
root@darwin:/home/cabrilo# fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8f800200
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104422 83 Linux
/dev/sda2 14 144 1052257+ 82 Linux swap
/dev/sda3 145 3432 26410860 83 Linux
/dev/sda4 3433 19457 128720812+ 83 Linux
And this is my fstab:
Code:
root@darwin:/home/cabrilo# cat /etc/fstab
/dev/sda2 swap swap defaults 0 0
/dev/sda3 / ext4 defaults 1 1
/dev/sda1 /boot ext2 defaults 1 2
/dev/sda4 /home ext4 defaults 1 2
#/dev/cdrom /mnt/cdrom auto noauto,owner,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
View 4 Replies
View Related
Jan 4, 2011
I have 10.10 installed and working OK. The Home directory is located on a second 1TB disk (sdb1). Recently, I've started to experience random boot failures where the start-up routine gets as far as showing the '10.10' logo with the progress dots underneath, but then throws up an error message saying that it cannot mount sdb1. I then have an option to Quit or drop into the shell to do a manual restart.
If I then do a Ctrl/Alt/Del, the system reboots, but usually fails again. Powering off and on, sometimes more than once, is the only way to eventually get a clean boot. The drive causing the problem is fairly new and all the diagnostic checks seem to indicate that it's healthy, so I'm not sure what causes the problem.
View 2 Replies
View Related
Jun 24, 2010
what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
View 1 Replies
View Related
Aug 5, 2010
I have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
View 2 Replies
View Related
Aug 24, 2010
First of all: it's been more than 12 years ago since I worked with Linux, and a lot has changed in the meantime. But I considered it a challenge to install Ubuntu 9.10 and lateron upgraded to 10.04 LTS without any troubles, until now:
Except my main partition ("/") all other partitions fail to mount. All NTFS partitions from my other OS and also 2 other linux ext4 partitions I've made are not accessible anymore. and, what bothers me the most: I deleted those 2 new linux partitions in the meantime because I couldn't access them initially because Root was the owner (Duh! root is standard disabled in Ubuntu, right?). After an attempt to try to automount all partitions following the help guides I got now big grey errors on my splashscreen while booting, telling that an error occured with e.g. /media/Backup because it is missing or it cannot be mounted, with 3 options below: waiting, skipping or using a command prompt to solve this. I always choose Skip for safety.
Now if I want to see the content of all my other partitions I got a popup telling me unable to mount e.g. /media/Downloads and the message included:
[Code]....
View 9 Replies
View Related
Oct 12, 2010
I started installing the beta of Maverick a few days ago, but the update server was running inordinately slow, so I canceled it. Several times, I have attempted to continue the installation, but I've been unable to reach the server. Shortly after this happened, I could no longer boot normally--I get the error:
Code: Kernel Panic - not syncing:VFS:Unable to mount root fs on unknown-block(0,0) Choosing the previous kernel fixes the problem.
So, I obviously want to upgrade to the release version now. When I open the update manager, I get asked if I want to do a partial upgrade to complete the install. I'm a bit leery of doing this since I only have one previous kernel to go back to (my list got really long and I have another operating system entry underneath, so I set my automagic boot manager to only keep two), and if I can no longer boot after the upgrade, I'll have to use Windows until it gets fixed... So, should I finish the upgrade, try to troubleshoot the error, or do something else to jump right to the latest release, after being partway through the upgrade?
View 3 Replies
View Related
Mar 29, 2009
I have a vista machine I recently put FC10 on. Through the course of figuring out wireless drivers, I goofed it enough that I was told to simply reinstall linux. I had the fedora GRUB file set as I wanted. But after I re-installed FC10 it would just hang after it searched for bootable CDs and stuff. I got the super grub CD and am able to boot into windows no issue. HOWEVER, when I select the fedora option, I get
"Error 17: Cannot mount selected partition"
I assume this means the grub doesn't know where my Linux boot stuff is. I have a separate drive dedicated to the linux install. The Vista drive is where the MBR is. So... how do I tell the grub where the FC10 install is? I've tried to reinstall FC10 twice hoping I just goofed something. edit: The standard grub file was in /boot/grub or something. Is there a file I can edit to point in the right direction?
View 1 Replies
View Related
May 28, 2010
When upgrading F12 to F13 I had a fatal error when I selected to update grub so I opted to do a fresh install of grub and the upgrade proceeded without any further problems. When I went to boot the system (dual-boot with Win 7) grub gave me error 17 "cannot mount selected partition". So I booted into rescue from the install disk thinking that maybe reinstalling grub might help, but when I ran "grub-install /dev/sda" I got the message that "/dev/sda does not have any corresponding BIOS drive" (I have Windows on SATA 1 sda and Fedora on SATA 2 sdb). I exited rescue mode rebooted entered BIOS and swapped the drive order and restarted. Success!... Well almost. The progress bar goes all the way across the screen to the point the login screen should come up then it hangs...
View 8 Replies
View Related
Jun 26, 2011
actually some my windows ntfs partiitions are unable to mount at start up. the error msg is -'some of your partitions are unable to mount press 's' to skip or 'm' to manually mount.
View 14 Replies
View Related
Jun 6, 2010
I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type
fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running:
mdadm --zero-superblock /dev/sda6
mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf
mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module
[root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4
Enter passphrase:
Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume: mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
Now, I unmount the volume
cd ~
Code:
umount /ftdata
cryptsetup remove ftdata
And now, if I try to setup my encrypted volume like this:
Code:
[root@localhost ~]# cryptsetup create ftdata /dev/md4
Enter passphrase:
mount -O noatime /dev/mapper/ftdata /ftdata
I get this error:
mount: you must specify the filesystem type
[Code].....
View 1 Replies
View Related
Feb 11, 2010
I'm not really sure this is the right category for this post...
I've been thinking and reading but I really don't find a solution, and this is why I decided to post here. I'm not a newbie using Linux but I know absolutely nothing about nfs and related stuff. If explanations are not clear/precise I'm sorry and absolutely open to explain myself better (I'm really desperate, at this point).
I'm running a Debian in a VirtualBox inside a RHEL5. To supply space to the virtual machine I'm trying to mount a disk (? maybe not?) that I created in the RHEL.
In RHEL: I created a directory /some/path/dir and I granted access to it from the VM (edit /etc/exports file and restart the nfs service)
In Debian: I created a directory to be used as mounting point (mkdir /other/nice/path/dir) and I tried to mount (mount -t nfs -v redhat:/some/path/dir /other/nice/path/dir). What happens next is the following:
mount.nfs: timeout set for Thu ...
mount.nfs: text-based options ...
mount.nfs: mount(2): Input/output error
mount.nfs: mount system call failed
Now, this Input/output error is too vague to trace where the problem is, but I really have no idea about how to go more in depth (are there logs somewhere? What should I look for? ... ...).
View 5 Replies
View Related
Oct 4, 2010
Not able to mount windows drive & foder, in linux. i have got following error.
mount error 92 = Protocol not available
View 10 Replies
View Related
Jun 6, 2010
I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running: mdadm --zero-superblock /dev/sda6 mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module [root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4 Enter passphrase: Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume:
mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
[Code]....
So why is it that I can't mount my encrypted volume after the first time? I am giving the correct password when it asks to.
View 3 Replies
View Related
Feb 9, 2010
i have installed nfs server on my redhat machine.when i want to mount shared data from client(suse)machine the following error occur."mount.nfs: mount to NFS server '10.3.31.146:/home/usbtest' failed: System Error: No route to host"
View 1 Replies
View Related
Jan 6, 2011
I just installed Linux Mint Debian Edition on my friend's laptop. The biggest problem is getting his iPhone 4 to mount. On libimobiledevice.org it shows a cool video of a guy managing his iPhone with Linux thanks to libimobiledevice. libimobiledevice.org also says libimobiledevice supports the iPhone 4. But when he plugs it in, he gets an error that says:
Quote: Unable to mount location: Unhandled Lockdown error (-5) It's a serious issue and needs to be resolved ASAP. ***EDIT*** If this is a hardware topic, any mods can feel free to move it.
View 5 Replies
View Related
Mar 18, 2011
I am struggling with getting an sshfs mount mounted on system boot. I have a script that mounts the sshfs for "userA". When userA runs the script all is well - user A can access the remote filesystem, root user can't see it as expected. The basic command is: sshfs userA@remote host:/home/userA /home/userA/mountdir -p 21212 -o password_stdin < passwordfile. I can prepend the sshfs command in the script with su - userA -c and when I run this script logged in as root all is well, userA has access and all is well. If I then put this script in /etc/init.d and reference it properly in the rc. directories the mount doesn't happen. If I prepend the sshfs command with sudo, same thing. Logged in as root I can run the script and UserA has access. Run the script in /etc/init.d during startup and the mount doesn't happen. Echoing text to a log file shows that the script is being executed but no mount happens.
View 4 Replies
View Related
May 24, 2011
I just updated to 11.04, and noticed in the "Background" tab of the appearance app, that there was what looked like a default option to cycle a set of backgrounds. However, when I selected it, the only background that appeared was the first one in the series, and it never cycled.
1) Is cycling backgrounds possible?
2) If so, can I create my own series of them?
View 1 Replies
View Related
Sep 5, 2010
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies
View Related
