Ubuntu :: 10.04.1: Can't Burn ISO To USB Drive?
Jan 3, 2011
I downloaded the LiveCD of Lucid to install it on my old notebook (which currently has *shudder* Winblows XP). The downloaded ISO passed the md5 check, but I can't burn it.I am using Lucid on a netbook right now, and it has no internal CD burner. So, I'm using an external CD/DVD burner via a USB connection.Ubuntu recognizes that there is a blank disc in there, but there is no "Burn to disc..." option in the right-click menu
View 9 Replies
ADVERTISEMENT
May 3, 2010
Since I started using Linux I've learned that almost anything is possible with a little tweaking, so I was just wondering that if I have a CD-RW/DVD-ROM drive on my laptop, is there any way to make it write to a DVD instead of just reading it? I know it's a long shot, but since the drive can write to a CD, I don't see a reason why it couldn't write to a DVD somehow.
View 7 Replies
View Related
Apr 17, 2011
how to burn a iso to a flash drive
View 9 Replies
View Related
Jan 4, 2010
i've had alot of problems with karmic koala but i think i should blame it on my computer damn things ancient anyways i want to install puppy linux because karmic requires all of my ram to operate but the only problem is that i can't get my CD-RW drive to burn i've ran an image burn through k3b brasero and gnomebaker and everytime i try to burn the image my computer freezes up i'm ready to pull my hair out i want to get puppy linux on this thing so it'll run faster is it because i'm trying to do too much with not enough RAM if so is there a few extra programs i can suspend untill i have burned the OS or
am i missing some kind of file or program or what i mean i can't even get the disc back out even if it unfreezes i still have to restart the system just to get the disc out i know it can't be my disc drive it's not new but it's never been used till now and it didn't come with a driver disc so it can't be that either all i want to do is get puppy linux installed and move on with my life until i buy a new computer then i'll just install the lastest ubuntu version at the time
View 4 Replies
View Related
Jul 28, 2010
I downloaded peppermintos as a replacement for ubuntu on my laptop. Now i can't burn it to a dvd. I'm using GnomeBaker and I get " /dev/sr0: media is not recognized as recordable DVD: 0". Is there a way to fix this, or even better, a way to run the iso straight from the hard drive.
View 3 Replies
View Related
Nov 3, 2010
i just added a new storage disk, and i can still boot the old one with ubuntu 10.10.
I want to install ubuntu on the new disk using the existing install.
Don't want to burn a CD or go hunt for a pen drive.
View 3 Replies
View Related
Jul 22, 2010
I decided I'm going to go back to a dual boot to see if I can get some of the slackware issues resolved on my laptop; its ubuntu only at the moment due to wireless problems. I've only got one hard drive so I can't simply unmount and repartition from gparted, I've lost all of my random linux live cds, and can't find a spare blank optical disc. Is there a way to boot from directly from the iso or from a flash drive or something?
View 6 Replies
View Related
Nov 12, 2010
is there a piece of software or script that will burn-in or exercise a hard drive? I want to stress it for a week or two before committing data to it.
View 2 Replies
View Related
Feb 21, 2011
the software will go through the motions and say burn successful and all the disc itself will even have look like its been written (with the burn circle and all), but when its put into the drive afterwards its still empty. My fstab has
Code:
/dev/sr0 /mnt/cdrom0 auto users,rw 0 0
/dev/sr1 /mnt/cdrom1 auto users,rw 0 0
for my drives. Both of them do this, wondering if anyone has any idea why it might do this. I know the drives both work fine.
View 8 Replies
View Related
Jul 24, 2011
I want to make a backup from my drive and burn it to dvdrom.
View 2 Replies
View Related
Nov 25, 2010
I am getting ready to go to FC14. Yesterday I downloaded both the 32 bit and 64 bit versions -dvd iso. When I tried to burn the images with K3B I got the message 'No Optical drvice found'. Shut off my PC and rebooted this morning. The first thing I did was I tried to burn the 32 bit version with K3B. It worked. Went off and installed it - no problem. I came back to burn the 64 bit version. K3B says "No optical drive found'. K3b (and/or Fedora) lost connection with my optical drives - a DVD-Writer and DVD reader. I have put cds into the drives and tried to open the cds with File Browser with no luck.
Some pertinent data:
[root@Vince vince]# cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Mon Aug 17 15:12:43 2009
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or vol_id(8) for more info
[Code].....
I looked in messages and found no references after the successful burning of the 32 bit dvd. Nothing to indicate why Fedora lost contact with the dvd writer. What else is needed to fix this? I think that if I reboot, I will have access to both drives again. If that happens, I will burn the 64 bit iso and look into updating my system.
View 1 Replies
View Related
Dec 25, 2010
I want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd
View 3 Replies
View Related
Jun 29, 2009
Every time i tried to burn a cd or dvd at the end i get the message "Error while burning. You do not have the required permissions to use this drive"
[Code]...
View 2 Replies
View Related
Aug 13, 2010
Debian and debian based distros issue has a issue that has come to make it self aware to me when I was trying to burn a video on my hard drive with braseo and it won't let me burn more than 4.4 gigs to a dvd with 4.7 gigs of free space even a file that is over the 4.4 gig limit by a megabyte with windows i didn't have this problem. One more thing I have 16 gig flash drive and on debian and debian based distros i can only use 13.1 gigs of it but on fedora I can use all 16 gigs.
View 3 Replies
View Related
Jul 7, 2010
I'm eventually going to download an ISO via wget on a command line Ubuntu Lucid. How would I burn the image to the disc?
View 1 Replies
View Related
Aug 7, 2010
I have just installed Ubuntu 10.04 onto my Compaq Evo N1020v (quite old laptop) The installation seemed to install without any problems and all updates have been done in update manager. Ubuntu is the only operating system on the laptop. My problem is, neither of the file burning apps Brasero Disk Burner or Send to CD/DVD will detect my blank DVD's. Both apps detect the blank CD's without a problem. File browser is able to read data on this DVD type in fact I installed Ubuntu from a DVD of this type.
View 2 Replies
View Related
Dec 22, 2010
I've tried numerous times and different ISO's but I cannot seem to burn ISO's to CD+RW. I'm using Braseo CD Burner. All it does is make the disc have 0 bytes remaining and it acts as if it is a CD-R/CD+R
View 9 Replies
View Related
Jan 31, 2011
I have a dual boot system on a box with 3.6 ghz cpu, 4 gigs memory and 3/4 terrabyte hds. I cannot get a CD/DVD to burn using Brasero. Here is the log: Well here is the last part of the log. for some reason the forum software would not let me put it all in:
[Code]...
View 2 Replies
View Related
Jul 15, 2011
I have Ubuntu 11.04 with all updates installed.
I can not burn any cd / dvd with Braseo, GnomeBaker, nautilus burner, etc.
The discs are "apparently" normally recorded
But then Ubuntu or DVDPlayer does not recognize the DVD or CD I burned.
Conclusion: Waste DVDs because they are unusable and I can not record.
I have a Gateway nv-53 laptop.
P.D: In older Ubuntu editions, Fedora 15, etc, I can burn disc perfectly.
View 4 Replies
View Related
Dec 6, 2010
I want to burn some Ubuntu iso to pass to my my friends . I am myself new to Ubuntu . How to burn an iso image to cd with k3b and where to adjust speed to minimum .
View 2 Replies
View Related
Jan 10, 2010
I can't burn the Ubuntu IMG file.
I'm using an AUDIO CD-R 80 min and I also tried with a DVD+R 4.7GB 120 min 1-16x speed but this error always pops up:
I'm using Windows XP on Bootcamp, maybe that's a reason?
View 1 Replies
View Related
Jan 23, 2010
I have an AVI converted to a VOB. How do I burn this using K3b or GnomeBaker? When trying to do it with K3B I get errors.
View 1 Replies
View Related
Feb 26, 2010
I have a stereo in my office. Its really a DVD player that will also play CD's. It has a nice surround sound setup. I have a bunch of mp3's on my computer that I would like to burn to a blank DVD that I have and play one long continuous DVD audio CD. Is this possible and if so, how do I do this? I have search for three days, and have come up empty.
View 2 Replies
View Related
Apr 25, 2010
I'm having sort of an odd problem trying to burn Cds through Rhythmbox on 9.10. Sometimes it has no problem burning the disc, but lately after I hit "burn" nothing happens and my fan starts running really loud. I think the disc just sits there spinning.
I can still burn discs using brasero, but it seems to be taking a lot longer than it should be. I'm hoping someone might have a quick fix for burning playlists straight from rhythmbox.
View 1 Replies
View Related
Apr 30, 2010
I've burned iso CDs for 8.10, 9.04, 9.10, Linux Mint 5, 6, 7 with Brasero. In addition I've burned music CDs with Brasero. It has worked well for me. But now I can't burn a 10.04 iso CD. I REALLY want to get a CD burned so I can install Lucid Lynx.
don't suggest I try kb3, Gnomebaker, or some other burner.. Brasero which always worked before.
View 4 Replies
View Related
May 31, 2010
The applications normally installed, like Brasero or GnomeBaker, seem to know just to burn audio CDs. I found in Package Manager three other applications with promising names (mp3burn, mp3roaster, mp3cd), but they also burn audio CDs... from mp3 files. What I want is to burn mp3 CDs playable on stereo systems, using mp3 files, or even converting from audio CDs or files (like for instance with Nero in Windows). Is there any solution?
View 6 Replies
View Related
Jun 6, 2010
I have lost my Karmic CD and have already used it to create a persistent LiveUSB. Now I think I might want to install / dual boot my new laptop with Ubuntu, I really love it and it just works. But I have one Blank CD left, I know Karmic works perfectly. Should I DL 10.04 and try that version? Also I am going to be using this guide to install
http://thpc.info/dual/vista/dualboot..._on_vista.html Yes, I do want to use EasyBCD instead of GRUB, its to risky for me and I am shivering just thinking about it.
View 9 Replies
View Related
Jun 11, 2010
I feel really stupid here. I've looked around but no fix I can figure out. I downloaded a i386 iso of Ubuntu to install on my daughter's laptop and I can't get the CD/DVD Creator on my main computer to burn it to either CD or DVD.
I *know* I've done it before but maybe that was on Jaunty not Lucid which I have on my computer now.
I can load the iso file into CD/DVD Creator and when I get to the "Write to disc" option it says: "Write disc to: FILE IMAGE" and there is no option to write it to my CD/DVD drive. It's as if the DVD writer is not mounted.
EDIT: The md5 checksum is fine, by the way..
View 8 Replies
View Related
Jul 21, 2010
Running Ubuntu 10.04 now, and still I can't burn a disc without errors. I had a different computer the last time I was able to burn a CD in Ubuntu. ECS K5S5A Motherboard died, and I acquired another computer, running another brand, similar AMD Athlon motherboard. 1.0 GHz processor instead of the 1.05 GHz Athlon processor , but the is laid out very similar.
Installed 9.04 from a disc burnt on the old computer. Trouble with errors in Brasero, and I upgraded through the Update Manager to 9.10 then to 10.04. I replaced the burner with the one out of my dead computer, that burnt successfully before it died, and I still have errors.
My Log:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
[Code]...
View 3 Replies
View Related
Nov 9, 2010
I am installing 10.04.1 (no GUI) in a Virtual Box for the purpose of running ClamAV on Windows computers that won't boot USB. I'm using a CDRW so I can keep it updated from time to time. I'm going to use Remastersys to create an ISO.
I need to know how to blank and burn a CDRW from the CLI.
View 3 Replies
View Related
