I am running xubuntu 10.04 under wubi. I have a Sony Handycam 700x Digital8. It is plugged into the USB port and not recognized. Nothing shows for it with lsusb.
How do I get the files off it? And once I get them, how do I edit?
I have problem connecting a sony handycam DCR-TRV270E PAL via firewire.The system cannot detect the camera.I tried kino,gimp,kdenlive nothing happens. When i plug in the camera nothing happens.
View 1 Replies View RelatedI've got a Sony Handycam DCR-DVD101. When I plug connect the USB cable to my laptop (Ubuntu 10) it doesn't mount any storage device.
If I run usb-devices, I see:
T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=054c ProdID=00c1 Rev=01.00
S: Manufacturer=SONY
[Code]....
Is there a GUI package out there that will allow me to setup handycam to allow download of photos to my Linux OS? Also would like a library and Editing software. I cant find my camera on the HCL list
View 2 Replies View RelatedJust bought a sony HDR-XR150 high def handycam. Thought since it had a USB connection (no firewire) that it would just mount as a drive and I'd be able to download the videos no problem. Well, it turns out it's a big problem... all the apps capable of talking to video cameras seem to only be able to use firewire. The camera does indeed mount as a drive but none of the video files I found seem to work... I get some video on some of the files from vlc but no sound and nothing seems to be able to transcribe the video. I'm currently on kubuntu 9.10 64 bit (2.6.31-20-generic)
Update: Found a series of .mts files on the camcorder. Nothing would read them properly except kdenlive -- seems to be the only thing that works!
I can't get Ubuntu to mount my Sony DRU540A, no matter what I do. Audio CDs, Data CDs and burning are impossible, does anybody have any ideas on how to mount this unmountable drive? It worked well enough to install Jaunty Jackalope, and I never had any problems using this drive with windows xp, but now that I've upgraded Karmic Koala it doesn't seem to work no matter what I try.
View 4 Replies View RelatedI've been trying to install Ubuntu 64bit on Sony Vaio CW and the Screen is 14 inch when I boot from CD it seems to work normal but after i select "Try Ubuntu without installing" or "Install Ubuntu" then the screen goes black like nothing happening but the CD runs for while then stop. Again I reboot to try again this time I press F6 then select "nomodeset" and it boots fine I was happy though, after installation success when I boot again WTF it goes black again and then I reboot and press "E" during the options that showing to select OS then I remove "Quit Splash".
I guess then I add "nomodeset" and control+X to boot, it works fine. So when I log in and of course I activate the Nvidia Graphic Driver then I reboot and WTF again the screen was out sync or something like the the screen didn't show properly. The Application menu normally is on the upper left of the screen but this time it was on the center of screen and the Shut down button came to the left side and i have to move the mouse cursor to the right and then it would appear on the left just like the resolution is to big for the screen.
I'm running ubuntu 9.10 and I'm having difficulty with my Sony DRU-540a & burning CDs. No matter what, every disc I put in is unwritable. In Brassaro it says:
There is No Recordable Disc Inserted
So I tried Nero & that also said there was no recordable disc. I know these discs are blank, I just bought them yesterday. They're the same type of disc I used before switching permanently to ubuntu. When trying to play an audio cd with VLC I get the following error:
Your input can't be opened:
VLC is unable to open the MRL 'cdda:///dev/sr0'. Check the log for details.
I installed ubuntu with this drive, why can't ubuntu read it?
I just bought a new TV and I'm trying to use my ubuntu box as a media server. I've included my specs below. Ubuntu recognizes the TV fine and the resolution is automatically set to 1920x1080 according to the display prefs which is native to the TV. I can see the desktop but it extends beyond the borders of my TV, which makes me think that somehow the resolution isn't set properly. I can't see my top or bottom task bar at all
Furthermore, the image is quite messed up. It's hard to explain, but text doesn't appear properly, nor do any icons etc on the desktop, they're somewhat pixellated. What's even more confusing is that movies themselves seem to play fine. I've downloaded some 720p mkv's and they play great, so it's just the desktop itself that is messed. I've installed the NVidia driver manually from their site and it's the latest 173.14.22.
[Code]...
I didn't know that charging via usb for my sony ericsson mobile, w880i actually needs the SE PC Suite to be installed, cos, I used to charge it via usb cable, as mentioned, on my workstation, which is window based, it's kinda insignificant to me that the software has to be installed first.
However, I'm currently on the move, with my newly installed "netbook", I installed Ubuntu 9.10 on my twinhead efio 121A (which is good, no compatibility issue) and now, I just figured that, SE PC Suite does not have any linux version, but my mobile is already out of battery, and I desperately need to charge it,
I did run a lsusb, it doesn't seem to detect the phone, neither as usb storage, or as a phone, cos, I saw other people lsusb output, it's an item with "sony ericsson", but my output does not have such item. However, when I plug in the usb cable, it did prompt to ask me to choose between "file transfer" or "phone mode".
I have a Sony Vaio VGN-FZ340E. I installed Ubuntu about 6 months ago and had a problem-free time with it. I then got busy with other stuff (house work, etc.) and hadn't worked on Ubuntu for about a month. Now I switch on my Vaio with Ubuntu and I find the screen is just too bright.Since 10.04 was just coming up, I thought this would be fixed when I update. I updated, but the screen is still too bright.
I searched the forum for answers and found only some pretty old threads which were about the Fn key combos (which, obviously, doesn't work), spicctrl, etc.So I followed the instructions here. I did just what Step 1: Checking for Module says, but Terminal just doesn't give any output.
So I have heard that it needs to be resized and be a different file type I think. How can I do this in Ubuntu?
View 5 Replies View RelatedI just got a new Sony laptop running the I7 Q740m Quadcore with 4m ram w/ WIN 7 Home. I want to run Ubuntu in a Virtual machine. I am wondering if Virtual box is a good choice, or what other VM I should use? Also which version of Ubuntu, 10.10 64bit or 32bit? Would an older OS be more stable?
View 2 Replies View Relatedi recently purchased a sony walkman nwz-b153f... i can directly create a folder and copy songs, but i want to copy songs in playlists.. like its done for ipods in i tunes... the guide says use windows media player 11 or 12..
View 4 Replies View RelatedI just installed Ubuntu on my Sony Vaio VPCEB23FM. However, when I tried to watch videos, there was no sound coming out. I went to [URL] and tried out the link in post #5, but that completely got rid of my sound card and I no longer have any version of ALSA.
Code:
[anurag@Anurag-Vaio:~$ aplay -l
aplay: device_list:223: no soundcards found...
anurag@Anurag-Vaio:~$ lspci -v
[Code]....
I have a problem with the system detecting my Sony Walkman NWZ-S639F. When I plug the device, the player's screen says 'Connecting', however nothing shows up on the laptop screen. When I was running Linux Mint 10, the player connected with no problem, and since Mint 10 is basically Ubuntu 10.10 with extra software, I think that I miss certain software packages.
View 1 Replies View RelatedI want to somehow get the digital audio recordings taken with my Sony IC Recorder (ICD-P320) onto my Ubunutu 10.04 machine, but the device is not recognized by Ubunutu. Recommendations?
View 1 Replies View RelatedI got a new Sony F series laptop and struggled thru getting the video card to work, the wireless card to work, and the volume to work on 9.10. The brightness controls have stumped me though. The screen is on full bright and the brightness controls (FN+F5 & FN+F6) make the applet display change but the actual screen brightness does not change. I have also tried the brightness applet in the panel and that also has no effect on actual screen brightness.
View 4 Replies View RelatedI am having problems with the brightness control on my sony vaio laptop, at virst when i upgraded the driver for the VGA card the whole screen went blank, I had to port a bin file from windows and write my own EDID file to get it to work (nVidia GT 230M), but I am having problems with the brightness, although ubuntu does read the input from the keys (FN+...), the brightness refuses to change, adding the brightness applet to the taskbar does not work either. I really need to be able to change my brightness because the battery usage is off the charts.
View 1 Replies View RelatedGot this player just a week ago and Linux have already shown it's dark side. Ubuntu doesn't recognize it.it uses some kind of a getaway which works just fine with Windows Media Player but as soon as I try it on Linux, nothing happens, unless I install Wine, and even then, it just shows the file list .. no way ( Nautilus / Rhythmbox just hangs ) I could remove/add any files.
View 1 Replies View RelatedCant install it or event boot it to try, because when i choose to install or test it the scene goes blank. I had the same problem when I had the older version but solved it whit using the custom eidi or whats is called and changing xorg.conf. But I saw that nvidia had posted the drivers for GeForce gt 330m on its site for 32 and 64 bit Linux drivers so i wanted to try the newest ubuntu. The thing is that i cant event install it or anything, so i cant use the eidi method either.
View 9 Replies View RelatedWhen I try to install Ubuntu or (having installed using Wubi) boot Ubuntu, I get a blank screen and no activity. This problem has been addressed many times but I haven't been able to get any of the proposed solutions (e.g. nomodeset, i8042.nopnp) to work. Is there another Linux or Unix-like OS that is known to work with this hardware?
Sony Vaio Y (VPCY)
NameIntel(R) HD Graphics
PNP Device IDPCIVEN_8086&DEV_0046&SUBSYS_9076104D&REV_023&115 83659&0&10
Adapter TypeIntel(R) HD Graphics (Core i3), Intel Corporation compatible
Adapter DescriptionIntel(R) HD Graphics
[Code].....
i'm trying to install ubuntu on a sony vaio. Unfortunately i cannot boot from a cd on which i have burnt the .iso file of ubuntu. The only way i managed to install ubuntu was by creating a usb bootable stick, but here also that doesn't work so well. My workaround was to use virtual clone drive which is freeware to simulate a cd rom in windows and get the iso file started. By leaving the bootable usb stick in the computer in this way it worked...
So in the end i have grub and can load ubuntu and win xp, but then by trying to format the harddrive i kind of messed things up and had to reinstall windows. Because the DVD drive only reads original cds. So from there i will attemp to reinstall ubuntu again. But how can i get rid of win xp afterwards ? If that CD Rom would only read burnt cds or if it would habe been possible to boot from usb then i wouldn't have this trouble.
I have a Sony Vaio VGN-SZ740 laptop with ubuntu 10.04. Unfortunately the motion eye webcam in not working. When I type lsusb in the terminal, it gives the following message:
Code:
I am having a problem with my new laptop Sony VPCEA1S1E. I installed Ubuntu 10.04 LTS and since then I cannot hear any sound. I have tried a lot of things before posting in here but nothing seems to work. From changing the module value in the alsa=base.conf file to installing the updated alsa drivers (drivers,utils,base}. I have also checked the alsamixer so that nothing is muted. I am struggling with this problem two days now and it does not look like I am getting somewhere. The various postings I have read so far did not work for my case.
A few things which might be useful at first:
card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0 .....
Advanced Linux Sound Architecture Driver Version 1.0.23.
Compiled on Oct 5 2010 for kernel 2.6.32-24-generic (SMP).
I'm having trouble with 802.11n as of late in Ubuntu. I know my wife's computer used to connect faster but it seems to not be able to go over 54 Mbit in 10.10 any more either. Laptop is a stock Sony Vaio VPCZ12CGX/x which has an Intel Advanced-N 6200 card.
LSPCI output: 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
I can connect to the 2.4Ghz channel or the 5Ghz channel on my wap both are capable of up to 300Mps as per its configuration but neither go over 54Mbit. Both do about 160Mbit from this same location in Windows. Moving closer makes no difference.
I'm having a hard time fixing the sound on my Sony Vaio Vaio VPCEE25FX/WI. Headphones work for some reason, but speaker doesn't.
View 1 Replies View RelatedOn my Sony Vaio VPCF12M1E I have a small but irritating problem: Since yesterday the numeric pad on my keyboard doesn't work anymore. I can use the numbers at the top, but not on my numpad. This happened out of nowhere when I was just setting up an access point. No idea what I did wrong, cause I only configured a static IP Reboot, and numpad was gone. I tried restarting the laptop, I tried disabling and enabling Numlock over and over again. Nothing works.
View 1 Replies View RelatedMy wireless connects and then in a few seconds disconnects and then again connects..... and so on.
And even it seems to be connected I cannot reach any website. Could you please help me?
Below there are some information probably needed
1 ) Machine Brand and Model (PC/Laptop): Sony vaio VPCM13M1E (Netbook)
2 ) Wireless Brand, Model and Wireless Chipset: (I believe it should be one of these)01:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe 02:00.5 Ethernet controller: JMicron Technology Corp. JMC260 PCI Express Fast Ethernet Controller (rev 02)
3 ) check interface:
a) ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 90:fb:a6:fe:ce:3d
[Code]...
I am a newbie to ubuntu 11.04 & I want to know if I can install sony ericsson pc suite for my sony hazel cellular phone I want to sync my contacts & messages with computer.
View 3 Replies View Related