I'm trying to upgrade my vim to 7.2. Did an rpm check and have downloaded the package package vim-7.2-8.1.
But then upon installing, it give me this "package vim-7.2-8.1 is already installed" which I guess to me it has been successfully installed. However when I start vim, it is still on version 6.3.
Firefox didn't want to start after I upgraded to 10.04. Finally, I found if I tried to start it from the command-line, it would seg fault:
[Code]....
Attempting to load the system libmoon Segmentation faultI tried using synaptic to remove the nonfree flash plugin, but that didn't help. Even after removing it, some files were still left, and those were dated 2007 and 2008. I manually deleted them:
[Code]....
I have a virtual machine on VirtualBox.I had Fedora 11, all was well.I ran the "preupgrade" tool. It downloaded all successfully, it asked me to reboot.On reboot, it installed everything as it should. It finished by saying it was installed successfully and asked me to reboot one last time.Now when I start it, some text flashes rapidly on the screen. Then it stops.See attached file for screenshot of the last text shown.
View 14 Replies View RelatedI'm using slackware-current and I followed the instructions on how to upgrade the xorg-server from 1.7.7 to 1.8.1.
But when I tried to start X, there's the error:
Cannot find module "intel" (module requirement mismatch)
Cannot find module "vesa" (module requirement mismatch)
Cannot find module "fbdev" (module does not exist)
It looked like I have to recompile the whole X package,but I don't know how to recompile the package as well on which package to recompile.
I was upgrading from 10.04 to 10.10 but my laptop battery went down so the installation did not ended up correctly.
When trying to reboot now, the system is not able to start correctly. No desktop, no icons... nothing.
Starting in recovery mode is impossible too.
Now I am running with live cd.
I have 2.6.18-164.2.1.e15 running on Hyper-v. I did yum update and noticed that kernel is upgraded to 2.6.18-164.9.1.e15. If I try to boot into the new kernel it hangs with message first "switchroot mount failed" and then "kernel panic". This is probably related to Hyper-v drivers installed in the old kernel. First question: Do you think this is correct? Is it possible to somehow disable Hyper-v drivers so I can boot into the new kernel and then reinstall drivers? There is nothing in Microsoft documentation about uninstalling Linux Integration Components.
View 9 Replies View RelatedIf I try to open Cinelerra from the GUI, it does nothing. If I try from the terminal I get this:
Code:
cinelerra: error while loading shared libraries: libfaad.so.0: cannot open shared object file: No such file or directory
I've been looking around all over the place and can't find a way past this. I really want to get it going again, can anyone help?
I've checked in synaptic and I have libfaad2 2.7-4
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left, I see the following error message:
"Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround.
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
[Code]....
i am trying to upgrade to ubuntu 10.04 from 8.04, and am getting this warning:"Upgrading may reduce desktop effects, and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardware in Ubuntu 10.04 LTS.Do you want to continue?"should i continue? i have no idea what a 'fglrx graphics driver' is
View 4 Replies View RelatedSince I upgraded to Ubuntu 10.40, I no longer have sound, except for the Ubuntu sound when it loads during start up. Does anyone know how I can recover sound on my computer?
View 3 Replies View RelatedIm trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
I have 3 script BASH. I want start this script when the system start,stop and reeboot.
View 4 Replies View RelatedI installed Ubuntu 10.10 64-bit, downloaded Adobe reader '.bin', from the terminal
It extracted and asked me for a installation location, to which i put [~]
It then finished the installation.
But when i click on the icon in the start menu or on desktop it fails to start, when i also click on a .pdf document it also fails to start!
I'm trying to find how to schedule a process to start at a specific time (not on start up). How would I schedule a process/application to start at a specific time (if it matters, it will be a background process). For instance, have process abc start every weekday at 5am. I've done this for windows many times though have only been using linux regularly for a few months and haven't figured out the best way of doing this.
So far the best solution I have is to create a program that will start on boot and have it check the time and sleep until the required time and then start the required process(es) at the required time(s). But this seems more of a hack since I'd expect there to be a proper way of doing this.
I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
I have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?
View 9 Replies View RelatedI am using Rhel5 and I'm new to linux so pardon me for sounding a bit green around the ears.Anyway..I got an error message a few weeks ago about how the start up script that displays icons on the far right of my start panel was malfunctioning and it was going to be deleted from the start-up. didn't really know what it really meant and I just clicked ok.wireless eth0 status icon as well as my amarok status icon are hidden on the start panel. How do I get it back/add that script back to the start-up
View 6 Replies View RelatedI have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
I just moved my / from sda1 to an ide drive, hde1. i dont see how this could have caused any of these issues, but it did.
First my network card failed to start. i added a line in my rc.local file (where i put all of my additional programs, etc i want to start):/etc/rc.d/rc.inet1
The above now starts my network card with my static ip configured. dhcpcd also worked but i wanted this static.
Now samba will not start. i have the following line in my rc.local: /etc/rc.d/init.d/samba start
This used to work just fine. at first i thought that samba may be trying to start before my network card gets an ip, but the line is *after* the network startup line. just to make sure, i made an additional script called startsamba which contained a sleep 60 followed by samba start, to delay the startup of samba even further.
The message samba reports is very vague, something like failed - core dumped. most of the core dump log is garbage characters, but here is the beginning which seems like it might contain some info:
Code:
ERROR: Can't log to stdout (-S) unless daemon is in foreground (-F) or interactive (-i) after the system starts, i can drop to a console and type "/etc/rc.d/init.d/samba start" and the service starts just fine. i've also tried starting samba manually with "smbd -d" which also produces the core dump when started from rc.local, but not when started from a console after startup.
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
i want to start apache and ktorrent on the systems start up, is there a program that will do it for me or do i need init scripts?
View 2 Replies View RelatedI want to monitor my work on the terminal.I know we can use script command.But every time when I start the terminal, I have to type script to start it.I want to automate it. So where should I include this command so that it will start as soon as I start the terminal ?
MY WORK TILL NOW: I have put this "script" command in the .profile.The when I start the terminal, it became an INFINITE LOOP.I am able to "echo".Thats coming only once.....but if I write a "script" command then it is becoming an INFINITE LOOP.
I've been fighting to get my wireless working and I've finally made some progress. I can actually manage to connect to my wireless network and so far it has been quite stable (fingers crossed).
However there is one slight nag. My wlan0 interface driver refuses to start at startup. When I type iwconfig its just not there. To fix this I have to manually run "rmmod rtl8187" and then "modprobe rtl8187". Then it works fine.
I've been trying to make a script to automate this but without success. I've tried both editing my rc.local and kde startup .xinitrc
How I could get those two commands to run automatically at startup after the boot process? I'm running Arch Linux and KDE 4.3
I use Opensuse 11 with fvwm. How can I get conky start automatically when I start fvwm?
I setup the conky under fvwm session for my Opensuse 11 but it won't start automatically. I am wondering how to write some kind of scripts to force it to start automatically and with a delay about 10 seconds after fvwm starts.
I just installed TuxGuitar - very cool - and to get the sound to work I had to install Timidity++ as well. Before I start TuxGuitar I have to execute:timidity -iA -Osin a terminal window first, which is kind of a pain to do every time I run TuxGuitar.How do I get this line to execute on startup such that timidity is running when I start up? I tried adding that line to rc.local
View 13 Replies View Relatedwhen i start the computer i will have 3 seconds to choose windows xp or else it will go on linux but someone told me that by changing the grub.cfg when i start my computer i will have 3 seconds to start linux or else it will be xp is this true ? and if it is can someone explain me how to do it because i would like that
View 3 Replies View RelatedI use FC8 and i want some services like HTTPD and NAMED to start at the start of the system , how to create a script to do that .
View 9 Replies View RelatedFresh install, followed the directions,
# ./configure --with-mysql --with-openssl --with-openssl-libs=/usr/lib (MySQL 5.5.12 & OpenSSL 1.0.0)
Everything seemed to go well enough. Stock lighttpd.conf. However, it won't start on boot. Not even manually via:
# /etc/init.d/lighttpd start
or
# /etc/init.d/lighttpd -f /etc/lighttpd/lighttpd.conf (came across that while scouring Google).
No messages, no logs, nothing. ?
