Currently I have installed GnuRadio3.2.2 software over Linux Fedora 12. My aim is to work with USRP device in a graphical design environment i.e. using the Gnuradio Companion (GRC). However, I cannot run GRC editor. how can I enter to the GRC graphical environment.
View 4 RepliesLast night I have installed updates of plymouth themes and pidgin but some how what happens is that the updates have changed my system setting and deleted xorg.conf file and some other settings and i couldn't able to get login screen either.I have recreated it using
#Xorg -configure
but still I cant get Login screen and in the gui I only get a blank screen where cursor is blinking.
I have tried installing system-config-display and reboot the system after doing
#system-config-display --reconfig --noui
but it is still same still not getting login screen.
I have ati radeon xpress200 on board graphics card. I searched on google to how to install the ati graphics card on fedora12 and found that mesa-driver-experimental could be used for fedora12 but still after installing it I found no effect in fedora12 right now it is running on a basic vesa drivers that I have set in xorg.conf. With vesa driver I can able to login but when I have installed xorg-x11-ati drivers and then do system-config-display. I can see the login screen but after giving password. It just giving blank screen and return back to login screen and again asks for login. I can login through terminal with the same account but cant with the GUI. Now what to do to for that?
i am using fedora12,i just wanted to know whether it is possible to add gadgets at the right hand side of your desktop. ie radio button,weather report etc which are present in windows 07/vista
View 4 Replies View Relatedi would like to know the list of browser's that fedora 12 supports (except firefox).i had installed opera 10.5 and it give me an error message kernel just crashed and restarts!i dont think so opera 10.5 is That stable with fedora, works properly in xp though.neways do tell me some browsers that can run smoothly in fedora
View 4 Replies View RelatedI recently installed Fedora 12 but Firefox will not launch now so I downloaded from Mozilla and installed the latest version using Vista but it still will not work yet I can download emails and go online using the live cd.
View 13 Replies View RelatedI'm trying to install dimdim on fedora12, but I'm not sure what to do after downloading the source code. Is there any other way to install other than using source code?
View 4 Replies View RelatedI am a new user to fedora 12.I am using reliance wireless broadband for internet.i have installed the drivers and did a wvdialconf and wvdial. The output of the wvdial was:
Code:
[root@gnanam gnanam]# wvdial
--> WvDial: Internet dialer version 1.60
[code]...
I am using fedora12 and i was wondering whether i could upgrade my fedora12 to fedora13!!i dont want to start installing fedora13 all over again(boot it again from a cd),i want to just upgrade it directly from my fedora12.when you install fedora13 will all the files of fedora12 get replaced with fedora13 or will it just add additional files onto your fedora12?
View 4 Replies View RelatedHow to change the login screen in Fedora12.i found that the blue fedora login screen a bit boring and i've downloaded a MAC4LIN file but i don't know how to use it. Any way to change the login menu screen using this Mac4lin or other methods? My target is to create a MAC login screen.....????
View 14 Replies View RelatedI am trying to share internet connection with Fedora12 as default gateway and XP machine hooked up via NIC using iptables commands as shown in Mark Sobell's book 'A Practical Guide To Fedora And Red Hat Enterprise Linux' These are the commands as placed in /etc/rc.local
iptables -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT
iptables -A FORWARD -j LOG
iptables -t NAT -A POSTROUTING -o eth1 -j MASQUERADE
I did flip the in and out parameters to match my NIC configuration ( as opposed to example from book ) but other than that followed example. One thing to note is that Sobell did not mention whether this should work with mix of Linux and XP. One other note ( maybe meaningless ) is that I do have samba working between the two machines.
I HAVE THOSHIBA satellite L500 lap with rtl8187 wireless card..but it's not working on fedora12...
I am able see out put of command modinfo rtl8187. But when I am using lsmod |grep rtl8187 I can't see anything. I updated my kerenel...any way the module is there that's why it's showing modinfo..But it's not loaded. module is at /lib/modules/$(uname -r)/kerenel/driveres/net/wireless/rtl81xx/rtl8187.ko
I have written simple modules (device driver)and i tried to compile and i found in /usr/src/ linux directory doesn't exists.
i have included </linux/modules.h> - doesn't exists in the /usr/src/ directory
i am using fedora 12 , 2.6.31.5-127.fc12.i686.PAE,i have install gcc,gcc-c++ compiler
Did i want to to download kernel source code for 2.6.31.5-127.fc12.i686.PAE. or how to add those files.
I installed PyQt4 using yum but when I ran python file it came up with message which says
Code:
[root@VAIO examples]# python
Python 2.6.2 (r262:71600, Aug 21 2009, 12:22:21)
[GCC 4.4.1 20090818 (Red Hat 4.4.1-6)] on linux2
[code]....
I ran the install from the Fedora12 DVD, downloaded via Bit Torrent, so integrity should be OK. The install shell does not see my 3rd harddrive, which is where I want to install. I burned the KDE live version of Fedora12 to run the checks suggested by marcrblevins. The results are below. Fdisk clearly sees sdc, where I want to put Fedora.I tried installing from the live CD, but the install shell was identical to the one from the DVD, so I'm pretty sure they are both good copies. The CD install could not read the 3rd harddisk, either. Ubuntu versions 9.04 and 9.10 installed to this partition without problem.
View 2 Replies View RelatedI am new to linux and am using fedora12 someone post me a good and free ebook link to study fedora.
View 2 Replies View RelatedIs there a document to configure openldap2.4 on fedora12 or ubuntu 9.04?
View 2 Replies View RelatedI have installed fedora 12 Omega remix. But I can not compile any C program or anything as for giving "cc" in terminal it shows "command not found". I think GCC is not installed in the system. If so the how can I install it? What are the rpm packages I need to install in order to compile C,C++ programs. If any pre-compiled version of gcc is availabe , then from where I can get it?
View 1 Replies View RelatedInstalling a F12 on a new 500gb SCSI disk.I had a previous SEPARATE disk with a stable F9 on it including its OWN SWAP space.After installing F12 to boot from the new disk it installed. When rebooted crashed with an Fdisk type problem ... Even though the entire O.S. was supposed to be separately installed on SCSI 500.. After many frustrating hours of why oh why? it appears as though the F12 installation by default grabs any allocated "SWAP" space on any allocated DISK.As an other O.S. had used that SWAP for itself (Which it has every right to do) Why then did F12 pick it up?? and Use it in /etc/fstab...Then crash as a result??
Removing the offending "SWAP" entry from /etc/fstab install solved the problem.But my question remains ?? Why Does F12 install pick up "foreign SWAP space"?
Does anybody know why the upgrade/install of TeXLive on Fedora12 does not create the directory /usr/local/ texlive/2009.I have seen this directory mentioned for other 2009s, but when I installed 2009 it did not create this. (Or, maybe there was some problem... ?) It is only slightly relevant because (sudo) texhash does not include any /usr/local directories in 2009, only /usr/share.
In my 2007 version I had the usual /usr/local/share/texmf/tex structure in which I place /latex and a /bibtex. I had read/write access and so I placed all my .sty and .bib files, as well as image files and other stuff I shared between projects. Now, I have a ~/texmf with /tex and /bibtex and have gotten rid of /latex subdirectory. Now I don't have to texhash when I add new stuff.Other than this, is there any reason why Fedora TeXLive-2009 would not create /usr/local/texlive ? (Unless this is because, as the wiki page notes , "it is in testing state so bugs could occur."
I hve following doubts regarding cross-compiling
1. if cross toolchain build wth differnet library other than the one using presently on host, will it b matter.
2. if toolchain build for 32-bit nd if i'm running it on 64-bit will it b matter.
I want to get a backup of my packages that I have installed on my computer.
When I was searching I found out that "service pack creator" is there to do the thing.
But service pack creator is not installed in my fedora12.
I searched it on Add/Remove Software but I could not find it. how to install it?
can 't boot fedora 12 from usb HDD after upgrade from fedora12 to fedora13 failed
View 6 Replies View Relatedi got an error this kernel requires an x86-64 CPU,but only detected an i686 CPU� while installing fedora12 in virtual machine..........
View 2 Replies View Related