I want to get a backup of my packages that I have installed on my computer.
When I was searching I found out that "service pack creator" is there to do the thing.
But service pack creator is not installed in my fedora12.
I searched it on Add/Remove Software but I could not find it. how to install it?
I have little problem with gpk servce pack (from gpk-package-extra package). When im trying to make list of my packages in system i have:
Quote:
Can't write the file, no permissions. OK, but when i run gpk service package as root, program freeze, i click create packages list option but application never create this file, status is always on 0%, even after 1 hour. I saw video tutorial, where base are created by normal user i /home - why i can't Console says nothing about this.
I'm trying to install dimdim on fedora12, but I'm not sure what to do after downloading the source code. Is there any other way to install other than using source code?
View 4 Replies View RelatedI ran the install from the Fedora12 DVD, downloaded via Bit Torrent, so integrity should be OK. The install shell does not see my 3rd harddrive, which is where I want to install. I burned the KDE live version of Fedora12 to run the checks suggested by marcrblevins. The results are below. Fdisk clearly sees sdc, where I want to put Fedora.I tried installing from the live CD, but the install shell was identical to the one from the DVD, so I'm pretty sure they are both good copies. The CD install could not read the 3rd harddisk, either. Ubuntu versions 9.04 and 9.10 installed to this partition without problem.
View 2 Replies View RelatedI have installed fedora 12 Omega remix. But I can not compile any C program or anything as for giving "cc" in terminal it shows "command not found". I think GCC is not installed in the system. If so the how can I install it? What are the rpm packages I need to install in order to compile C,C++ programs. If any pre-compiled version of gcc is availabe , then from where I can get it?
View 1 Replies View RelatedInstalling a F12 on a new 500gb SCSI disk.I had a previous SEPARATE disk with a stable F9 on it including its OWN SWAP space.After installing F12 to boot from the new disk it installed. When rebooted crashed with an Fdisk type problem ... Even though the entire O.S. was supposed to be separately installed on SCSI 500.. After many frustrating hours of why oh why? it appears as though the F12 installation by default grabs any allocated "SWAP" space on any allocated DISK.As an other O.S. had used that SWAP for itself (Which it has every right to do) Why then did F12 pick it up?? and Use it in /etc/fstab...Then crash as a result??
Removing the offending "SWAP" entry from /etc/fstab install solved the problem.But my question remains ?? Why Does F12 install pick up "foreign SWAP space"?
Does anybody know why the upgrade/install of TeXLive on Fedora12 does not create the directory /usr/local/ texlive/2009.I have seen this directory mentioned for other 2009s, but when I installed 2009 it did not create this. (Or, maybe there was some problem... ?) It is only slightly relevant because (sudo) texhash does not include any /usr/local directories in 2009, only /usr/share.
In my 2007 version I had the usual /usr/local/share/texmf/tex structure in which I place /latex and a /bibtex. I had read/write access and so I placed all my .sty and .bib files, as well as image files and other stuff I shared between projects. Now, I have a ~/texmf with /tex and /bibtex and have gotten rid of /latex subdirectory. Now I don't have to texhash when I add new stuff.Other than this, is there any reason why Fedora TeXLive-2009 would not create /usr/local/texlive ? (Unless this is because, as the wiki page notes , "it is in testing state so bugs could occur."
I recently installed Ubuntu 10.04 on my laptop. It's a Latitude D830. Everything's working well, which is why I decided to start customizing Ubuntu's look. My first stop was gnomelook.org and the other popular theme website for gnome(cant remember the name). Anyway, I could not find what I wanted in a theme so I turned to Ultimate Edition's website. I followed their instructions to add their repo to sources.list.
Then tried to install one of the theme packs, only to be told that 'usplash' could not be installed. So, I went ahead and googled the message and found out that 10.04 no longer uses 'usplash', it uses 'plymouth'. UE's website claims that their themes can be installed in any version of the official Ubuntu releases. All I had to do was follow their instructions to add the repo to sources.list, which I did. Can I force install a theme pack and bypass the 'usplash' error? maybe at the command line with apt?
Through gnome-look, I found an icon pack that looks really cool, but I do not know what to do with the tar.bz2 file. Here is a link to the icon pack: [url]
How do I make this icon pack the icons on my Ubuntu installation?
There may be a way not to download all dependency and install one by one.But how?Sorry for such a basic question but i could find only solutions for ubuntu.
View 6 Replies View Relatedi need to install a danish language pack for openoffice 3.2.0
I have tried to install this package "openoffice.org-|10n-da" with synaptic, but doesn't change anything apparently; can only choose English.
I have also tried to download the language package from openoffice website, but when i run the deb it says "reinstall" and dosen't change anything...
I recently installed Ubuntu 10.04 on my laptop. It's a Latitude D830. Everything's working well, which is why I decided to start customizing Ubuntu's look. My first stop was gnomelook.org and the other popular theme website for gnome(cant remember the name).Anyway, I could not find what I wanted in a theme so I turned to Ultimate Edition's website. I followed their instructions to add their repo to sources.list. Then tried to install one of the theme packs, only to be told that 'usplash' could not be installed. WHAT!? So, I went ahead and googled the message and found out that 10.04 no longer uses 'usplash', it uses 'plymouth'.
UE's website claims that their themes can be installed in any version of the official Ubuntu releases. All I had to do was follow their instructions to add the repo to sources.list, which I did.Can I force install a theme pack and bypass the 'usplash' error? maybe at the command line with apt?found another site with the Ultimate Edition themes and direct download links. I installed the latest one(UE 2.6 theme pack), package installer didn't complain, installation was successful, but the theme is nowhere to be found on my system. LOL I even went into Synaptic, searched for the theme, it didn't come up.
I'm a Kindle DX owner and I normally download some free PDFs from the internet, but I prefer to read then using the PRC format. As I'm a Linux user, I can't use Mobipocket Creator, then I want to ask for a alternative.
View 3 Replies View RelatedHowto install usb-creator on Lenny?
I've tried to install according to:
[URL]
but I get this error:
Code:
# bzr branch lp:usb-creator usb-creator.trunk
You have not informed bzr of your launchpad login. If you are attempting a write operation and it fails, run "bzr launchpad-login YOUR_ID" and try again.
bzr: ERROR: Unknown branch format: 'Bazaar Branch Format 7 (needs bzr 1.6
I am new to Ubuntu 9.10.But after reading some tips I was able to install vlc player,handbrake,a free DVD ripper.Now I downloaded a DVD creating tool by nameDEVEDE (devede_3.16.8-0~rastersoft1_all.deb). But it is asking mencoder which I could not install even after installing many uniuversal and multiverse codecs related to mencoder and mplayer.
Therefore I request you to kindly tell me how to install first mpalayer and mencoder also tell me source installing(normally a deb) packages of mencoder and mplayer. Please give me details for offline installation only. Finally tell me how to install DVD creator DEVEDE i.e devede_3.16.8-0~rastersoft1_all.deb.
i successfully installed rosetta stone and now i want to install a language pack but that requires the cd drive how do i give wine access to the cd drive so i can install a language pack
View 1 Replies View Relatedinstall other distros using Startup Disk Creator? e.g Fedora, Suse, Gentoo
View 2 Replies View RelatedUbuntu have a great tool (the best) Startup Disk Creator help we make a live USB for Ubuntu!My question is: can I use it for an windows.iso!? Can I use this to make an USB to Install window!?After that i will bring my two USB around, see my friend and say:"Hey, do you want a fress install Window (they will lost there license) and after that - Sr, but why dont try Ubuntu!)
View 4 Replies View Relatedwhy when using usb creator I may be getting a Failed to install Bootloader error??
I have the .ISO selected in the top pane, 8GB usb drive path in the lower pane.
I'm going this route because my mb isn't recognizing the CD's autorun.inf.
I am running 10.0.4 and am having problems installing Startup Disk Creator. what can I do to resolve the problem?
View 8 Replies View RelatedI just tried UB10's Startup Disk Creator under Admin drop down to install Ultimate Edition 26 and it worked like a charm. Now I have this distro. on a USB stick and can install it for friends rather than via disk. Also helpful for those with netbooks who do not have a CD/DVD reader. It was surprisingly painless and very fast
View 2 Replies View RelatedI am having trouble trying to figure out how to switch over to Ubuntu. I have downloaded the OS to my computer but can't figure out how to put it on my USB flashdrive as directed. It shows how use your USB flashdrive using Windows, Mac and Ubuntu but when I read the instructions for Ubuntu, opensuse does not have the program Startup Disk Creator.
View 9 Replies View RelatedI'm trying to install a language-pack for my OpenOffice, but there seems to be a dependency-problem. Maybe someone has a suggestion. FC12, x64 OOo.x64 3.1.1
Code:
[root@sarah yum.repos.d]# yum install openoffice.org-langpack-de
Loaded plugins: fastestmirror, presto, refresh-packagekit, remove-with-leaves
Loading mirror speeds from cached hostfile
* fedora: ftp.astral.ro
* livna: rpm.livna.org
[Code]...
Last night I have installed updates of plymouth themes and pidgin but some how what happens is that the updates have changed my system setting and deleted xorg.conf file and some other settings and i couldn't able to get login screen either.I have recreated it using
#Xorg -configure
but still I cant get Login screen and in the gui I only get a blank screen where cursor is blinking.
I have tried installing system-config-display and reboot the system after doing
#system-config-display --reconfig --noui
but it is still same still not getting login screen.
I have ati radeon xpress200 on board graphics card. I searched on google to how to install the ati graphics card on fedora12 and found that mesa-driver-experimental could be used for fedora12 but still after installing it I found no effect in fedora12 right now it is running on a basic vesa drivers that I have set in xorg.conf. With vesa driver I can able to login but when I have installed xorg-x11-ati drivers and then do system-config-display. I can see the login screen but after giving password. It just giving blank screen and return back to login screen and again asks for login. I can login through terminal with the same account but cant with the GUI. Now what to do to for that?
i am using fedora12,i just wanted to know whether it is possible to add gadgets at the right hand side of your desktop. ie radio button,weather report etc which are present in windows 07/vista
View 4 Replies View RelatedCurrently I have installed GnuRadio3.2.2 software over Linux Fedora 12. My aim is to work with USRP device in a graphical design environment i.e. using the Gnuradio Companion (GRC). However, I cannot run GRC editor. how can I enter to the GRC graphical environment.
View 4 Replies View Relatedi would like to know the list of browser's that fedora 12 supports (except firefox).i had installed opera 10.5 and it give me an error message kernel just crashed and restarts!i dont think so opera 10.5 is That stable with fedora, works properly in xp though.neways do tell me some browsers that can run smoothly in fedora
View 4 Replies View RelatedI recently installed Fedora 12 but Firefox will not launch now so I downloaded from Mozilla and installed the latest version using Vista but it still will not work yet I can download emails and go online using the live cd.
View 13 Replies View RelatedI am a new user to fedora 12.I am using reliance wireless broadband for internet.i have installed the drivers and did a wvdialconf and wvdial. The output of the wvdial was:
Code:
[root@gnanam gnanam]# wvdial
--> WvDial: Internet dialer version 1.60
[code]...
I am using fedora12 and i was wondering whether i could upgrade my fedora12 to fedora13!!i dont want to start installing fedora13 all over again(boot it again from a cd),i want to just upgrade it directly from my fedora12.when you install fedora13 will all the files of fedora12 get replaced with fedora13 or will it just add additional files onto your fedora12?
View 4 Replies View Related