I run a cygwin installation on my windows 7 laptop. I run a rsync service, it works perfectly and is up and running. I start a reverse ssh tunnel: ssh -R 877:localhost:873 [URL] The tunnel works and is up and running. Then from my server I run the following command
Everything works except for �,�,�,�,�,� in the filenames. If I on the other hand runs rsync via ssh from my laptop to my server directly the swedisch characters works. Both the server and the laptop cygwin installation runs on sv_SE.ISO8859-1.
so i start it with ssh -f -R 4096:localhost:22 me@server.com and it comes up and someone can log in at the remote end. how do i close the tunnel from the initiating end ? netstat doesnt seem to identify my end of the tunnel , unless im looking for the wrong thing!
I am currently running 64-bit Windows 7 from my home laptop and I would like to establish an SSH reverse tunnel to my laptop from my work Ubuntu 64-bit machine. I have been reading many "tutorials" that have led me nowhere and I feel as though I'm chasing my tail now. I have done the following on my Ubuntu machine:
Code: ssh -R 19999:localhost:22 laptop_ip and on my Windows machine, using putty, did the following: Code: Host Name: host_IP
[Code]...
I am able to access my Ubuntu machine when on my work network but there I have been unsuccessful when it comes to trying to remotely access it. I have tried everything that I can think of (though I am a novice). If there is any help/suggestions/ideas that could help, please let me know and don't hesitate to ask for more info!
p.s. I would also like to enable x-forwarding, but for now I would like to have remote access to the Ubuntu machine.
Now I know that the first is the tunnel end but how can I connect the two lines if I don't know the port number (ie: someone else estabilieshes another tunnel)
I am an heavy user of VNC, i use it to connect to my home computer from university and vice versa using a reverse ssh tunnel. Now, the screen at my university pc is using an higher resolution than the one of my laptop, so I can see only part of the screen. How can I address this? so that I can see full screen? Also, RDP works quicker than VNC, is there any setting I could use to speed up VNC?
Thought I'd post it here because it's more server related than desktop... I have a script that does:
[Code]....
This is used to sync my local development snapshot with the live web server. There has to be a more compact way of doing this? Can I combine some of the rsyncs? Can I make the rsync set or keep the user and group affiliations? Can I exclude .* yet include .htaccess?
When I run rsync --recursive --times --perms --links --delete --exclude-from='Documents/exclude.txt' ./ /media/myusb/
where Documents/exclude.txt is
- /Downloads/ - /Desktop/books/
the files in those directories are still copied onto my USB.
And...
I used fetchmail to download all my gmail emails. When I run rsync -ar --exclude-from='/home/xtheunknown0/Documents/exclude.txt' ./ /media/myusb/ I get the first image at url.
I have a tiny shell script to rsync files between two servers and remove the source files.
This script works fine, when it has been initiated manually or even when the rsync command is executed on the command line.
But the same script doesn't work, when I try to automate it through crontab.
I am using 'abc' user to execute this rsync, instead of root, as root login to servers are restricted in all of our servers, by us.
As I mentioned earlier, manual execution works like charm!
When this rsync.sh is initiated through crontab, it runs the first command(chown abc.abc ...) perfectly without any issues. But the second line is not at all executed, and there is no log entry i can find at /mnt/xyz/folder/rsync.log.
I'm using Ubuntu 10.04 LTS server and Postgresql 8.4. I have a .sh script that is run by cron every other hour. That works fine. The .sh script includes an rsync command that copies a postgresql dump .tar file to a remote archive location via ssh. That fails when run by cron; I think because it is (quietly) asking for the remote user's password (and not getting it). I set up the public/private ssh key arrangement. The script succeeds when run manually as the same user that the cron job uses, and does not ask for the password. I am able to ssh to the remote server from the source server (using the same username) and not get the password prompt (both directions), so why doesn't rsync work? I even put a .pgpass file in the root of that user's directory with that user's password, and the user/password are identical on both servers.
I think the problem is rsync is not able to use the ssh key correctly. I tried adding this to my script but it didn't help.
Code:
Here is the rsync command embedding in the .sh script.
I'm working remotely at the minute, but have several 'incoming' automatic reverse shells connecting to a dedicated server. This dedicated server does not have X, but several of the 'incoming' shell servers do. Basically, take three machines, laptop, server, client. Laptop and client have X, server does not. All three machines have password-less logins to each other (laptop > server, server > client) and can password-lessly establish a shell.
I've tried ssh -X user@server "ssh -X user@client gui-application" and, no suprise, I'm getting 'Cannot open Display" messages. Does anyone know I nice one-liner for this kind of tunnelling?
I would like to have a linux server for Using SSH Tunnel with PuTTY ! May i can use ubuntu desktop edition for this ? or it is bether to use server edition ?
I'm trying to set up a secure web tunnel at home I have an Ubuntu box (desktop), a Mac, and a Windows 7 box. I use all of them for different reasons. I want to be able to route traffic from my browser through my Ubuntu box. I have done this before with proxy servers abroad, but I want to do it using ssh and my box at home so I don't have to pay for a service i.e (Secure Tunnel)etc.
I followed the instructions at http://bit.ly/hAnp6u. However, using my Win7 box, after I set the browser part per the instructions, I get no connection from the browser.
Is it possible to chain together multiple SSH tunnel hops in a single `ssh -L` command on the client side? I have two gateways I need to get through in order to access a remote host. For a normal SSH client connection, it's simple enough chain this all together by simply appending the additional SSH connection commands to the first one:Code: ssh gateway.1 ssh gateway.2 ssh remote.host.
I'm trying to tunnel and SSH connection through another server.for the tunnel is ran:ssh -L 8112:yy.yy.yy.yy:22 -N user@xx.xx.xx.xxBut when I try to ssh to localhost -p8112 I get an immediate error saying "exited: remote closed the connection
i have a Netbook which is connected to the internet with its wireless card, i have another computer that connect to the Netbook via wired cable (LAN), in order to shre files BTW the computer and still get an internet connection to the bench computer i am using SSH server on hte Netbook, and create a SOCKs (i really don't know that is it exactlly, i just followed up with some tutorial) on the bench and i can get an internet connection on the bench machine via Firefox.
the problem arise when i try to use YUM, as far as i understand it, it does not know about the SOCKs.the masseges that i got from yum are:14: PYCURL ERROR 56 - ""i have tried so far (based on some googleing that i have did):1. type 'export http_proxy='http://localhost:8080"' (8080 is the port i use to create the Dynamic SSH for the SOCKs) in the bench machine.2. in yum.conf i have tried to add a 'proxy=...' line.i have found somthing that i think could help, but i didn't tried it
I want to develop program to put (tunnel) sniffed packets into another packet, i already have sniffer code to capture packet, can some one give me use full site or simple code to do that.
I have a domain and the settings for it are pointed at my IP address. But when I look up my IP address, it does not show my domain as the hostname. What settings do I have to change to make my IP translate into my domain as the hostname?
Unfortunately I have followed a misleading guide to set ssh and scp in order not to supply password everytime and...I messed up my ssh/scp settings as it does not work anymore.Well, in my attempt:
I moved to Code: Select allcd ~/.ssh then I created a rsa key Code: Select allssh-keygen -t rsa
Then I tried tunnelling and...it didn't work. So, ok, I tried to recover previous settings erasing all the items in the folder ~/ .ssh/. After I tried copying a file with the "usual" command that used to work before (i.e. scp file user-id@server) and...I've found out it does not work anymore!
I get this error message: ssh_exchange_identification: Connection closed by remote host
I have a headless server, running Fedora 13. I want to make a ssh tunnel to that server from laptop that is also running Fedora 13. Logging into that server over ssh works well, X11 forwarding also works, but I can't establish a ssh tunnel.
At the moment I was trying to connect two small python tcp sample programs, that communicate through port 8000. Running them both on my laptop works well.
What I am trying to do is that I am making two seperate ssh connections to my server, let's say it's address is myserver.com.
1) I make a 'standard' ssh connection to it
Code:
And run the server program
2) I open another terminal window and make the tunnel
Code:
3) I open 3rd terminal window and try to run the client program, that is trying to connect to localhost:8000.
If I understand it correctly, the client should now connect to localhost:8000, ssh would discover that and send that data to myserver.com port 8000. Then the server program on myserver.com is listening on that port and should get that data and send "hello world" string back to the client. Then the client should get that, print it to stdout and exit.
Unfortunatly all what it does is that it just hangs for about ten seconds and then says "connection lost" (timeout?)
I have tried other programs, they also timout.
By passing the -v argument to ssh it outputs:
Code:
When I try to connect the client it prints four more lines:
Code:
So as you see, it says that the connection times out..Also can anybody tell what the "Unspecified GSS failure." means? The possible break in attempt is caused by connecting to the server using the myserver.com address while being in the same local network with the server. If I connect using server's local ip address (ie. 192.168.1.xxx), the message dissappears.
I've set up a machine with VNC through SSH. And it works just great when I first create the tunnel using:Quote:ssh -L 5902:10.0.0.250:5902 jk@10.0.0.250and then open localhost::5902 in vinagre (if I input localhost:2 it auto chnges to localhost::5902 for some reason).I would however like to have one less window (gnome-terminal) open and use the "Use host _ as SSH tunnel" in vinagre.But for the life of me I can't get it to work. Anyone here that can help me figure out what to input in vinagre to get it to work (without having gnome-terminal open in the background) ?
I Need to make an SSL tunnel over SSH, I need to create exactly an SSL tunnel,I have a situation like that, I heared it is possible,but don't know how to create an SSL tunnel over SSH i am having putty installed on my pc,So i think i can use putty for this purpose, But i don't know how to do this.
I have set up a Ubuntu 10.10 server. I have been using ssh tunnels to encrypt my web traffic at public wifi. I am trying to make this server as secure as posible so I enabled ufw. I allowed SSH and HTTP traffic in and denied everything else. But when I do that I can not use SSH -D because when I try to visit a webpage it does not load and I get the following.
Code: uname@mybox:~$ channel 3: open failed: connect failed: Connection timed out ^C uname@mybox:~$ fclchannel 4: open failed: connect failed: Connection timed out ^C uname@mybox:~$ exit logout
What do I have to do to allow ufw to allow ssh tunnels through?
I wanted to create an ssh tunnel but I do not know what commands to run .. my environment is as follows: LAN Internet Office LAN Home PC <-> Linux firewall <-> http server..
According to the above what I figure is that I have an internal web server at my job and I need to create a tunnel to access the web server from my PC in my home. I know I can do a port forwarding with the firewall but I don't want to publish this web server to Internet. My home PC and both servers (firewall and web) are ubuntu. My idea is create a ssh tunnel that forward port 8080 on localhost in my home pc, to the firewall (obviously with public ip), and the the firewall forward to port 80 on office web server at my job. Note that the firewall accepts ssh connections to port 22, same for web server...
