so i start it with ssh -f -R 4096:localhost:22 me@server.com and it comes up and someone can log in at the remote end. how do i close the tunnel from the initiating end ? netstat doesnt seem to identify my end of the tunnel , unless im looking for the wrong thing!
View 1 RepliesI am currently running 64-bit Windows 7 from my home laptop and I would like to establish an SSH reverse tunnel to my laptop from my work Ubuntu 64-bit machine. I have been reading many "tutorials" that have led me nowhere and I feel as though I'm chasing my tail now. I have done the following on my Ubuntu machine:
Code:
ssh -R 19999:localhost:22 laptop_ip
and on my Windows machine, using putty, did the following:
Code:
Host Name: host_IP
[Code]...
I am able to access my Ubuntu machine when on my work network but there I have been unsuccessful when it comes to trying to remotely access it. I have tried everything that I can think of (though I am a novice). If there is any help/suggestions/ideas that could help, please let me know and don't hesitate to ask for more info!
p.s. I would also like to enable x-forwarding, but for now I would like to have remote access to the Ubuntu machine.
I run a cygwin installation on my windows 7 laptop. I run a rsync service, it works perfectly and is up and running. I start a reverse ssh tunnel: ssh -R 877:localhost:873 [URL] The tunnel works and is up and running. Then from my server I run the following command
rsync -av --port 877 useronlap@localhost::modulename/c/Users/useronlap/Documents/ /root
Everything works except for �,�,�,�,�,� in the filenames. If I on the other hand runs rsync via ssh from my laptop to my server directly the swedisch characters works. Both the server and the laptop cygwin installation runs on sv_SE.ISO8859-1.
I have an sshd server up and running (F13 64bit) I'd like to connect to a pc that's behind a firewall using ssh tunnelling, so I have something like
ssh -R 1234:127.0.0.1:22 myuser@mypc
then from mypc I can succesfully login to the remote pc. I have just une question. How can I list the ssh active connections and the forwarded ports ?
I've only got to
netstat -tunva
but this returns only (filtered)
tcp 0 0 127.0.0.1:1234 0.0.0.0:* LISTEN
tcp 0 0 ::ffff:172.16.0.XXX:22 ::ffff:172.16.1.XXX:60744 ESTABLISHED
Now I know that the first is the tunnel end but how can I connect the two lines if I don't know the port number (ie: someone else estabilieshes another tunnel)
I am an heavy user of VNC, i use it to connect to my home computer from university and vice versa using a reverse ssh tunnel. Now, the screen at my university pc is using an higher resolution than the one of my laptop, so I can see only part of the screen. How can I address this? so that I can see full screen? Also, RDP works quicker than VNC, is there any setting I could use to speed up VNC?
View 5 Replies View RelatedI am using RHEL5. These are my config files:
Code:
options {
listen-on port 53 { 127.0.0.1; 192.168.14.54; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
[code]....
I Need to make an SSL tunnel over SSH, I need to create exactly an SSL tunnel,I have a situation like that, I heared it is possible,but don't know how to create an SSL tunnel over SSH i am having putty installed on my pc,So i think i can use putty for this purpose, But i don't know how to do this.
View 1 Replies View RelatedI wanted to create an ssh tunnel but I do not know what commands to run .. my environment is as follows:
LAN Internet Office LAN
Home PC <-> Linux firewall <-> http server..
According to the above what I figure is that I have an internal web server at my job and I need to create a tunnel to access the web server from my PC in my home. I know I can do a port forwarding with the firewall but I don't want to publish this web server to Internet. My home PC and both servers (firewall and web) are ubuntu. My idea is create a ssh tunnel that forward port 8080 on localhost in my home pc, to the firewall (obviously with public ip), and the the firewall forward to port 80 on office web server at my job. Note that the firewall accepts ssh connections to port 22, same for web server...
I want to be able to SSH into my computer that I can't expose port 22 on. I've tried the ssh -R ... several times, but can't manage to make it work.I have my home computer (want to SSH into), server (can SSH into), and some computer I want to SSH from.Do I need to install the sshd on the machine I want to SSH into? What are the commands I need to enter to forward from my server to my home computer?
View 1 Replies View RelatedBrowsing via SSH Tunnel very slow When browsing in firefox at work via proxy through ssh on my 8.04 server the speed is near dial up. I have compression enabled, tried restarting ssh, and rebooting the server but it remains so sluggish. At home the connection is quick but the speed is lost in translation once I ssh in. I also tried adding "UseDNS no" to the ssh config but that did not help with the slow login or any other speed issues.
View 5 Replies View RelatedI tried this :
Quote:
ssh -ND 9999 username@home_router_ip_address
and this is output :
�nani@jebe-kevu-ovaj-PC:~$ ssh -ND 999 nani@nani.homelinux.com
Privileged ports can only be forwarded by root.
nani@jebe-kevu-ovaj-PC:~$ sudo ssh -ND 999 nani@nani.homelinux.com
[code]....
which password is he looking for exacly ? user nani is main user at ubuntu after he asked me for password i typed my nani user password and i got in , after how you can see he ask me for onather password i tried the nani�s password but nothing is heppening ?
I'm trying to run a script to execute the command
Code:
ssh -D port host
when my laptop connects to internet. I have placed the script in /etc/network/if-up.d/.The scripts is being run when it should, but the SSH-tunnel isn't created.I can however run the script manually, as root, and then the tunnel is created.
I have a server running Ubuntu Server 10.04 that is a VirtualBox/Samba/SSH server. I have port forwarding set up for ports 22 and 3389 (SSH and RDP) and I want to access the Samba share without opening any other ports. I can connect to it from my internal network, but I want to be able to access it from school. My best guess would be to tunnel the Samba port through SSH, but I don't know how. I will be connecting to it from Ubuntu 10.10 Desktop.
View 9 Replies View RelatedIn the office I use firefox for my work items and chrome for my personal items. I currently use proxy switchy with chrome to browse through an ssh tunnel to my home server. The chrome/switchy part works fine.In order to do this I have to open a command window every morning and execute:ssh -p8181 -D 9999 user@myhomeserver.comThen the command window asks my password and I am up and running. (my ssh server at home is running on port 8181)Is there a way to script this so I don't have to open the command window and enter my password every day (and also to prevent a visible command window from being open and visible)
View 1 Replies View RelatedI set up a routed OpenVPN server. Everything works fine. But I'd like to route the DNS queries thru the tunnel too. So I added:
[Code]....
Can't find server name for address 10.8.0.1: Non-existent domain Even thou I have a DNS server set up correctly (on the same server as the VPN) with recursion. I verified that by sending queries form external source, which worked fine. I suspect that the Bind server doesn't listen to the tun0-interface only eth0, but the Bind manual says it should listen to all interfaces by default. The server log shows:
Code:
named[9639]: client 10.8.0.10#3807: RFC 1918 response from Internet for 1.0.8.10.in-addr.arpa
How do I get these DNS queries to resolve thru the tunnel?
I use two Ubuntu machines, one at home and one at work. In order to connect to the machine at work from home I need to connect through a "tunnel server" that controls all the traffic to the machines at work.I am able to connect with ssh to the tunnel server and from the tunnel server ssh my own machine at work. My question is how do I retrieve files form my work machine to the home machine. How do I sync folders between the machines using rsync when the "tunnel server" is in between?
View 3 Replies View RelatedI don't understand the concept of ssh port forwarding and tunneling.I was going to set up a remote desktop (vnc) connection to my grandmother's laptop that we'll give her soon so if something goes wrong i can fix it from here (she lives on the other side of the world). However, i've read using vnc plain over the internet isn't secure, and that i can secure it by running it through an ssh tunnel.That's what i've understood so far. However, from there on i get confused.
I'd have to run both an ssh server AND a vnc server on her laptop? So what i'd have to do is ssh into her computer, and then while logged on on her computer, somehow open a vnc connection back from the remote server to the local computer? Then i'd go back to my local computer and open a port where the vnc connection is waiting? From the concept, it would seem like i should be able to tunnel all the regular network traffic from the local computer to the remote one through ssh?
I'm trying to create a VPN through SSH but encounter the following:
Code:
[18:42:11]root@bronzhip:/home/casey# sudo ssh -w 0:0 97.**.***.221 -i VPN
channel 0: open failed: administratively prohibited: open failed
[code]....
I'm trying to set up a secure web tunnel at home I have an Ubuntu box (desktop), a Mac, and a Windows 7 box. I use all of them for different reasons. I want to be able to route traffic from my browser through my Ubuntu box. I have done this before with proxy servers abroad, but I want to do it using ssh and my box at home so I don't have to pay for a service i.e (Secure Tunnel)etc.
I followed the instructions at http://bit.ly/hAnp6u. However, using my Win7 box, after I set the browser part per the instructions, I get no connection from the browser.
Is it possible to chain together multiple SSH tunnel hops in a single `ssh -L` command on the client side? I have two gateways I need to get through in order to access a remote host. For a normal SSH client connection, it's simple enough chain this all together by simply appending the additional SSH connection commands to the first one:Code: ssh gateway.1 ssh gateway.2 ssh remote.host.
View 6 Replies View Relatedhow to set reverse dns for my IP? I've configured bind with a reverse dns for my IP, but it doesn't work when I test it.
View 2 Replies View RelatedI have a domain and the settings for it are pointed at my IP address. But when I look up my IP address, it does not show my domain as the hostname. What settings do I have to change to make my IP translate into my domain as the hostname?
View 3 Replies View RelatedI run Ubuntu 9.10 locally connecting to CentOS5 on a remote server.When I run the following command in the Terminal;ssh -v -L 10005:localhost:10000 root@remote_ip_address -F ~/.ssh_config -i ~/.ssh/private_key_file_nameafter 'Authentication succeeded (publickey)' I get the following for channel 1;sys_tun_open: failed to open tunnel control interface:Permission deniedhowever, it does open an interactive client-session on channel 2 and my browser will then connect (via URL localhost:10005) to Webmin on the remote server which is the object of the exercise.However, because sys_tun_open failed, I am concerned that the transactions may not be encrypted as I understand they would be in proper tunnelling
View 4 Replies View RelatedI'm trying to create EoIP interface on ubuntu so i can create a simple tunnel to my mikrotik router. Is there anyone know how or even done that? If EoIP is not possible, is there any other simple way?
I had already read and thought about doing it with OpenVPN, but when I read the community documentation for OpenVPN on ubuntu 10.10, I fear it won't connect the tunnel to mikrotik OpenVPN server, since OpenVPN on ubuntu uses 2 certificate and 2 key files(as i read on the docs), but mikrotik configuration, i can see only 1 certificate can be applied on. This confuses me and make me decide to use EoIP(but i can't find any tutorial/docs about it). I don't actually need the encryption and security, i just need to create a tunnel for ubuntu and mikrotik.
My friend has a server with 2 ips, 1 primary and 1 secondary/failover. He has given me a shell account and I want to use ssh to route my home http traffic through it like a socks proxy. I connect to his server using the secondary ip like this:
ssh me@secondary_ip -p port -D forwarding_port
It builds a proxy, however it uses the primary ip of the server, not the secondary ip that I logged in with. When using irssi I've bound it to the secondary ip with no problem. If I try to use the -b flag I get the error: cannot bind: Cannot assign requested address.
how I can bind the ssh tunnel to the secondary ip?
I am using 10.04 ubuntu and I have forgotten my password to login to a ssh tunnel. It is not the root password on my computer. Is there any way I can find the password out, change it, or just start over and create a new one? I know it isn't a connection problem because I can't login to ssh from localhost either. I've tried reinstalling ssh too.
View 3 Replies View RelatedI am trying to establish a tunnel from my ubuntu machine 9.10 using miredo package. After installation I wanted to ping an ipv6 address and I get this error:
Address unreachable, destination unreachable
However, when I ping ipv6.google.com I have no problem.
I have a headless server, running Fedora 13. I want to make a ssh tunnel to that server from laptop that is also running Fedora 13. Logging into that server over ssh works well, X11 forwarding also works, but I can't establish a ssh tunnel.
At the moment I was trying to connect two small python tcp sample programs, that communicate through port 8000. Running them both on my laptop works well.
What I am trying to do is that I am making two seperate ssh connections to my server, let's say it's address is myserver.com.
1) I make a 'standard' ssh connection to it
Code:
And run the server program
2) I open another terminal window and make the tunnel
Code:
3) I open 3rd terminal window and try to run the client program, that is trying to connect to localhost:8000.
If I understand it correctly, the client should now connect to localhost:8000, ssh would discover that and send that data to myserver.com port 8000. Then the server program on myserver.com is listening on that port and should get that data and send "hello world" string back to the client. Then the client should get that, print it to stdout and exit.
Unfortunatly all what it does is that it just hangs for about ten seconds and then says "connection lost" (timeout?)
I have tried other programs, they also timout.
By passing the -v argument to ssh it outputs:
Code:
When I try to connect the client it prints four more lines:
Code:
So as you see, it says that the connection times out..Also can anybody tell what the "Unspecified GSS failure." means? The possible break in attempt is caused by connecting to the server using the myserver.com address while being in the same local network with the server. If I connect using server's local ip address (ie. 192.168.1.xxx), the message dissappears.
i need possible direction on setting up a tunnel between 2 different network. The tunnel will be used by devices from the 2 different network to communicate with each other (for eg DevA and DevB).
DevA <-> Linux A <=====================> Linux B <-> DevB
My school network uses a http proxy to access the internet, but I am dubious about the security, and so I would like to use http inside ssh to keep my data secure. I don't really know where to start on this, so a step-by-step guide, or links to resources, would be helpful.
View 2 Replies View Related