Software :: Kmail Forwarding And Replying Error?

Mar 23, 2011

I have two mail accounts, a gmail and a gmx account (default). Kmail downloads emails from both mail services correctly. Kmail sends emails which I create from new. Kmail forwards and replys to emails arriving from gmx without issue. Kmail gives me and error:- The server did not accept the sender address "example.smith@gmail.com" The server responded:"5.7.0 Sender address does not belong to logged in user {mp-eu001}" when I try to reply or forward a messsage which came from gmail.

View 2 Replies


ADVERTISEMENT

OpenSUSE :: Kmail 1.13.6 ( KDE 4.6 ) Forwarding Inline Not Working?

May 19, 2011

I am running opensuse11.4. When trying to forward emails I can only do so as attachment. When I click and hold to select the forward inline option I get an empty email - same as if I would have clicked new. The same happens when I place the inline button on to the toolbar. Is this a bug with Kmail or is there another setting to forward mail inline?

View 1 Replies View Related

CentOS 5 Server :: BIND DNS - Verify Query Replying Nameserver

Sep 3, 2010

How do I know the reply was from caching-nameserver, master nameserver or slave nameserver in BIND DNS.? Can I trace the nameserver that replied my dns query? Like I have a master nameserver, a slave nameserver and a caching nameserver in my network. Is it possible to know that which of these servers replied my dns query? Also can i trace back that replying server exactly?

View 3 Replies View Related

General :: KMail Sending Failed - Unknown Error Code 50

Dec 10, 2010

I want to ask about Kmail. I have Kmail from Mandriva. I use Kmail for My Email. And When I reply Message, I found some trouble.

Sending failed:
Unknown error code 50. The message content was not accepted.
The server responded: "5.7.1 Message refused by BannedWord check. This email has been rejected. The email message was detected as spam." Please send a full bug report at [URL]. The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. This transport protocol was used: smtp.net

How to solve this email error I get when I try to send email via KMail.

View 2 Replies View Related

OpenSUSE :: Kmail Has Disappeared - Getting "if Kmail Is Not Typo" Speech

Apr 17, 2010

I have been using kmail on opensuse (11.2) for about 3 months with few issues. I usually launch using alt+F2, type "kma" and it appears top of the list. I have turned on my laptop today and kmail has simply disappeared. I have gone through the ghekko and the only mail client listed is thunderbird. It is not in the alt+F2 menu. If I type kmail in konsole I get the "if kmail is not a typo" speech. I've also tried using kontact (for the first time) to see if my mail appears there

View 4 Replies View Related

General :: Port Forwarding Ssh Error Bind: Address Already In Use

May 10, 2011

- I setup port forwarding of openssh :

connect 1: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22222:ip-server1:161

- Then I setup second connection

connect 2: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22223:ip-server1:3306

- Openssh waring to me "bind: address already in use"

- So I think port 22223 have had another program use,I use command:

ps aux | grep ssh /* find process id of second connection */
kill -9 <process-id-second-connection>
netstat -an | grep 22223 /*find which program use port 22223> */

- but I can't find anywhat

- Then I run again command :

connect 2: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22223:ip-server1:3306

- And I receive a error from OpenSSH :" bind: address already in use"

View 2 Replies View Related

General :: X11 Forwarding Failed - Error: Can't Open Display: MAC_ip:0.0

Mar 31, 2011

I also had ever tried all methods they mentioned, but my problem is still there. I am using a MAC OS X 10.6 ssh a remote redhat server. I hope to see X of redhat on my own MAC. Below is what I've done: 'MAC_ip' stands for my mac; 'redhat_ip' stands for redhat server.

1) ssh to redhat server
2) change to root
3) type command: DISPLAY=MAC_ip:0.0
4) type command: export
5) Back to MAC
6) change to root
7) type command: xhost +Redhat_ip
8) vim /etc/ssh_config, add X11Forwarding yes
9) Back to redhat, type: xclock

I got below message: Error: Can't open display: MAC_ip:0.0 I also tried some methods to login as others suggested:

[Code]....

View 10 Replies View Related

Networking :: Shorewall: Port Forwarding Port Is Closed Even After Forwarding?

Dec 12, 2009

I have just set up shorewall on my router running Arch Linux. The external network is on eth0 and the internal network on eth1.I have set it up for masquerading and that works fine and I can open ports to the firewall. But I'm having trouble with port forwarding to my internal machines.The problem I have is that when port 22350 is forwarded to 192.168.1.3 on my local network, checking the port with nmap from a remote computer gives me:

Code:
PORT STATE SERVICE
22350/tcp closed unknown

[code]....

View 2 Replies View Related

Ubuntu Networking :: Error - Remote Port Forwarding Failed For Listen Port 5500

Aug 7, 2010

When I use the following command:

ssh user@ssh_server -L 5500:localhost:5500 -p 22

everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:

ssh user@ssh_server -R 5500:localhost:5500 -p 22

I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...

View 2 Replies View Related

General :: X11 Forwarding - Error: Can't Open Display: <ip Of Display>

Jun 28, 2011

I have the following scenario that doesn't seem to work normally. I have a windows 7 pc from which I am using putty to connect to my other linux servers (all running redhat 5 and 6). So here is the scenario that works and one that does not work. And I'm trying to figure out the one that does not work. Scenario that works:

From windows 7 (putty) I ssh into Linux_Server_1.
echo $DISPLAY
localhost:10.0

I run xclock and I see it pop up on my windows 7 pc. I am using xming on windows 7 to help me populate the display from linux to windows. One that does not work:

From windows 7 (putty) I ssh into Linux_Server_1. Then from Linux_Server_1 I ssh into Linux_Server_2.
echo $DISPLAY
<no output>

I try to setup $DISPLAY with localhost:10.0 or 0.0 or even my windows 7 pc ip address:0.0 ....etc Then when I try to run xclock I doesn't work.

I get these error messages: Error: Can't open display: <ip of display>

Also as a side note all our Linux servers are sitting on one subnet. My pc is sitting on another subnet. I use vpn to connect to the subnet where the servers sit from my pc.

View 4 Replies View Related

Fedora :: Use Kmail Instead Of Evolution?

Jun 25, 2010

I have Fedora 10. Does Fedora 10 include KDE? If so, I do I use KDE? I would like to use Kmail instead of Evolution.

View 1 Replies View Related

OpenSUSE :: Kmail Configuration From KDE 3.5 To KDE 4?

Feb 20, 2010

At last, I am serious converting from openSUSE/KDE3.5 to openSUSE 11.2/KDE 4. Being a bit retarded in this, the following must have been solved by many.

After starting Kmail in KDE 4 I managed to see all my mails. I also managed to get my filters moved from old to new (had to go back to 3.5 to export them first).

But I still fail to see how to copy my accounts/identities, etc. It is not done automaticaly, there is no export function I could find. How to manage this?

EDIT: must be 3.5 in the title. Done by a nice mod.

View 9 Replies View Related

OpenSUSE :: Kmail Always Rings Twice

Oct 7, 2010

On my OpenSuse 11.2 KDE 4.3.5, when I launch kmail for the first time it does not start. I have to re-launch it to get it running. By launching it from the command line, I get the message:

[code]...

I find all this quite annoying. What could be the solution?

View 3 Replies View Related

Software :: How To Configure KMail With GPG

May 22, 2010

I am trying to configure Kmail with GPG. I followed steps described in [URL].

The official manual says:
Then click Modify > Advanced > OpenPGP Key
It will automatically go to the path of your gpgkey, that is ~/.gnupg

In reality: It does not automatically go anywhere, but provides a menu to change OpenPGP encryption key. When I click on the button to change my key it shows me a selection menu with my key in it. When I select it, the red cross appears on the icon near the key and the "OK" button remains grey, so I can not do anything. Did anybody try to configure Kmail with GPG? How do you configure Kmail to use your keys?

View 1 Replies View Related

Slackware :: Launch Kmail But Not Others?

Feb 28, 2010

I have just installed Alien Bob's kde 4.4 packages as per his README instructions over a fresh install of current as of 31 Jan.

I can open a kde session but have problems with running kde applications. Non kde applications such as Firefox, Scanlite, Geany, Gopdit open fine but so far kde applications are hit or miss.

I could launch kmail but not others. Kwrite from quicklaunch gave me a "KDEInit could not launch /usr/bin/kwrite in a pop up but konqueror, dolphin, kcalc to name a few just don't launch with a click and leave no error messages.

I have tried running them from XFC's terminal and I get the following:

Quote:

bash-3.1$ dolphin
bash: /usr/bin/dolphin: cannot execute binary file
bash-3.1$ ls -l /usr/bin/dolphin
-rwxr-xr-x 1 root root 631240 2010-02-06 03:41 /usr/bin/dolphin

View 2 Replies View Related

Slackware :: KMail (KDE 4.4) See Through Notification

Feb 23, 2010

When I click the detailed progress window button in the bottom window of KMail when checking email the progress bar is see through.

See the attached for a screenshot.

I want to confirm this is just happening to me then if it isn't I can report it as a bug.

View 1 Replies View Related

OpenSUSE :: Kmail Does Not Have A Consistent Layout

Jan 14, 2010

I have setup different identities in Kmail to deal with multiple gmail accounts so I have a different set of inbox, sent mail and draft folder for each account.In the message layout, I have chosen to display the columns - subject,sender/receiver and date. For one of my email accounts, kmail does the job perfectly. The inbox foler shows subject, sender and date, whereas the sent-mail folder shows subject, receiver and date. However, this order is not maintained for my other email accounts. The inbox folders show subject, sender and date(which is correct); the sent-mail folder shows subject, sender and date - instead of subject, receiver and date which is what should be displayed.

View 3 Replies View Related

OpenSUSE :: Can KMail Be Configured To Have Two Different Accounts

Feb 24, 2010

can KMail be configured to have two different accounts and keep one tree of folders for each, like Seamonkey?

VampirD
No in elenath h�lar nan h�d g�n
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.12 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/

[code]....

View 1 Replies View Related

OpenSUSE :: Stop Kmail On Start Up?

Mar 7, 2010

I set Kmail to launch on start up but now no longer wish for it to do so. However, i cannot find the setting i changed in the first place.

View 4 Replies View Related

OpenSUSE :: Use Kaddressbook Groups In Kmail?

Mar 18, 2010

how to use kaddressbook groups in kmail?

I can create groups, but when I send an e-mail to one of these groups it is sent to group_name@localhost, which, obviously, is not what I want. Some versions back this worked perfectly, but now it seems that there is no way.

I use opensuse 11.1 with kde 4.4.1

View 4 Replies View Related

OpenSUSE :: KMail 1.12.4 - Message Windows?

Apr 25, 2010

how can I get rid of the collapsible date tabs in the K-Mail message windows? I would simply have the message displayed by subject/date etc

View 4 Replies View Related

OpenSUSE :: Kmail Read-only Attachments

Jul 3, 2010

Is there a setting to make the default in Kmail to save the attachments (or when dragging them into a folder) so they are NOT set to read-only?

View 4 Replies View Related

OpenSUSE :: KMail Download Old Messages?

Mar 27, 2011

how to make KMail download all messages, new and old?

I have an email client on my android phone as well as KMail on this computer. Its important for me to be able to see all my old messages for reference.

View 4 Replies View Related

OpenSUSE :: Import Keys For Kmail GPG?

Mar 30, 2011

I just installed openSUSE 11.4 and want to import my public/private keys to use in Kmail. However, after a great deal of searching, I can't find a keyring manager. Is there one installed with 11.4, or do I have to add one and if so, which should I use?

View 3 Replies View Related

OpenSUSE :: Kmail Not Storing The Passwords?

Apr 5, 2011

In my recently installed openSUSE 11.4 system I am using Kwallet to store all of my private passwords and also those associated with my Kmail accounts. All of these passwords appear correctly in Kwallet, but it seems there is a problem with Kmail accessing them.Whenever I start a new session, Kmail loads first and is followed by Kwallet. When Kmail then tries to do its first mail retrieval it stops and asks for the account password. I type this in and then Kwallet requests its administrator password. Once I type this in, my mail is downloaded and I get no further request for the passwords during that session.

The same thing happens when I attempt to send my first email of the day. I get a Kmail request for the SMTP account password. I've tried changing the Kwallet settings so that it doesn't close when unused for a period,or when the screensaver kicks in, but this (predictably) has no effect. In the Access Control screen, both KDE Wallet Manager and Kontact are shown as 'Always Allow' and I can see no other settings in either Kwallet or Kmail which are relevant to the problem.My guess is that the problem occurs because Kmail starts up ahead of Kwallet and therefore doesn't load the passwords initially. But that may be a red herring as I'm not familiar with the way Kmail and Kwallet interact.

View 4 Replies View Related

OpenSUSE :: Upgrading From 11.1 To 11.4 - Migrating KDE 3.5 KMail

Jun 25, 2011

I am now using SuSE 11.1 with KMail 1.9.10 (KDE 3.5.10 "release 21.13.1" open SUSE). My intention is to do a clean install of 11.4 from purchased DVD and then migrate (import) all of my personal files from a backup. I have not yet seen either SuSE 11.4 or KDE4, so I am unfamiliar with any changes to the folders and files, how they may have been named, where they're located in 11.4, etc. Inoder to copy my backed up KDE 3.5 KMail into the newly installed SuSE 11.4/KDE4 KMail, will the following folders and files go into folders and files named the same in 11.4/KDE4, or will the folders and files for the new KMail be named differently and/or be located differently?

/home/<my name>/.kde/share/apps/kmail (my e-mails)
/home/<my name>/.kde/share/apps/kabc/ (address book)
/home/<my name>/.kde/share/config/kaddressbookrc (address book settings)
/home/<my name>/.kde/share/config/kmailrc (kmail settings)

Are there any issues I need to be aware of in migrating the KDE 3.5 Kmail materials into 11.4/KDE4? Or will this be as simple as when I upgraded from 11.0 to 11.1?

View 9 Replies View Related

Ubuntu :: No E-mail Addresses In Kmail?

May 4, 2010

After reinstalling with Kubuntu 10.04 my e-mail addresses stored in Kontact don't show up in the list of e-mail addresses when choosing addresses in a new e-mail. When I open my addressbook I can see all addresses.

View 2 Replies View Related

Ubuntu :: Kmail Won't Send To Groups?

May 12, 2010

Running 9.04 with Kmail 1.12.2 with KDE 4.3. Akonadi is activated. Everything works except I cannot email to a distribution list. Am using POP3 with SMPTE. Comes back with

p, li { white-space: pre-wrap; } Message sending failed since the following recipients were rejected by the server: test@steve-laptop (The server responded: "test@steve-laptop failed to route the address")

So I unchecked the default-domain inside my sending option for SMPTE and same thing.

Is there a manual switch or setting in kmailrc? I looked and didn't see anything. Doing the same thing on 3 different computers. Tried searching the net but couldn't find anything.

View 1 Replies View Related

Software :: KMail Won't Send Mail?

Jul 5, 2011

I am using KMail 1.13.7, and receiving mail works fine, but sending mail via SMTP through Gmail doesn't work. When I try to send email it give me "Transport 'Gmail.com' is invalid". I have tried deleting the account and recreating it to no avail, and I even tried changing smtp.gmail.com to smtp.googlemail.com, with the exact same error.

View 5 Replies View Related

Software :: Any Way To Completely Purge KMail?

Jun 17, 2010

I first started KMail and entered the wrong stuff. Now it's all messed up and I don't know how to fix it. Is there a way to completely purge KMail and make it act as if it was first opened?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved