I get errors when trying to manage my VM with Virtual Machine Manager.When adding the disk img, it complained that it didn't have search rights and tried to fix it but failed.It let me move on so I moved forward.I then built the VM and I couldn;t start it from within VMM.
I'm having some issues with a windows virtual machine. The system is Fedora 11 and the virtual machine is Windows 2008 Server. If I start the virtual machine from the virtual machine manager, it only has a single cpu despite my setting it to eight. If I start the machine from the command line, I can get four cpus but not eight. In both cases windows seem to display the eight cpus in the device manager (or whatever program it is). It has been suggest that windows was imaged on a four core machine before being loaded on the eight core machine and that something in windows is maxing at four cores. But that doesn't explain why the virtual machine manager can only start one cpu. I just played around on my home machine with a fedora 10 live cd and it recognized the two cores on that machine and used them from the virtual machine manager without problem. Also upped it to three cpus without problem.
I tried to yum install libvirt but it says it is the latest.I have also checked that i have the latest qemu-kvm virt-manager virt-viewer python-virtinst.I understand that the error msg says that it is unable to find that certain file, libvirt-sock, and i dun think i have it either.
I have the virtual machine manager in fedora 11.On Dell Inspiron 1545 (dual core, 2GB RAM)I can not run any linux distribution virtualized Using Qemu as engine.The virtualized system boots but after not working.Try distributions of 32 and 64 bit.
I have an F12 installation on which I have installed NoMachine's NX server. I can remote in nicely when needed (try to do as much as possible via SSH) while not having to boot into and stay on Gnome on the server and run VNC.I noted that when I try to start the Virtual Machine Manager from an NX session, I get an error that VMM is "unable to open a connection to the libvirt management daemon". libvirtd is running, however. And, when I startx on the server and try there, VMM works fine.Is this an inherent problem with the use of VMM, or something correctable?
i have fedora 11 installed on my laptop. i used to run another linux flavor through virtual machine manager but it is giving error. i have just tried it with different flavors. i tired it with BACKTRACK, UBUNTU AND MINT(live cd) each time it gives error. last time i tried with QEMU type connection as loca installation media(iso). with the MINT iso it gave the error.
I'm using fedora 13(x86_64).i installed windows xp in the virtual machine manager(which comes along with my distro).i installed it after creating the virtual hard disk,but after completing the installation of windows xp,the hard disk is not booting,it throws an error like the following picture.
I have a file that was created in Virtual Machine Manager and I need to get it out of the virtual operating system(windowsXP). Writing to a USB would be ideal but that hasn't been working since I upgraded to Fedora12.Is there anyway I can mount the image to retrieve the file?wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so mounting as fvat doesn't work either.
I used my fc13's "Virtual Machine Manager" to install a FC14 vm image from a new iso.After a week of 8 hour days I got fc14 installed, I think that the "minimal" install option was bad. Now it takes yum 15 minutes to get warmed up. and about an hour for 1 simple package.(It was going in the background while working on other stuff, causing the cpu fan to roar with the extra load)It would be easier to install Fedora on an abacus or perhaps water clock.
Every time I try to start a virtual machine in VirtualBox I get this error:
Code: Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup' as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. So I run '/etc/init.d/vboxdrv setup' in the terminal as root and I get this:
I'm running Fedora 11 (2.6.30.10-105.2.4.fc11.i686.PAE) 8 GB memory on a AMD Phenom(tm) II X4 965 Processor, 4 core server I just built.The problem I have run into is any virtual machine that has >1024 MB memory assigned to it will not boot. As along as it has 1024 MB or less it boots fine.The symptom you see is a very quick message "Booting from hard disk" the screen then goes blank, you can't login through SSH, and can't ping the network address so I know it's not some crazy video problem hiding the boot process.The attachment are messages from a failed boot attempt.
after upgrading VirtualBox from 3.0.x to VirtualBox-OSE-3.1.2-1.fc12.x86_64 VBox fails to start any virtual machine with error: Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
I get FATAL: Error inserting vboxnetflt (/lib/modules/2.6.31.12-174.2.19.fc12.x86_64/extra/VirtualBox-OSE/vboxnetflt.ko): Invalid module format FATAL: Error inserting vboxnetadp (/lib/modules/2.6.31.12-174.2.19.fc12.x86_64/extra/VirtualBox-OSE/vboxnetadp.ko): Invalid module format Kernel is (obviously) kernel-2.6.31.12-174.2.19.fc12.x86_64, but same thing happens with any installed kernel, IE kernel-rt-2.6.31.12-1.rt20.1.fc12.ccrma.x86_64
I reinstalled VBox and kmods got rebuilt but the problem persists.
How do I program a virtual machine to auto-start/boot upon boot up of the host system? I am experimenting with SNORT network intrusion detection system and have installed it inside a virtual ubuntu box which I want to start automatically.
Unable to complete install: 'Invalid install location: Mounting location nfs://192.168.1.12/var/ftp/pub/ failed' when i try to make virtual machine using virt-manager. i get this error.why this occur,please tell i take these steps for making virtual m/c.
1 change system ip into static and install virtualization group.
2 make one partition where i want to install vitual m/c
3 then vim /etc/exports, in which i give path where is data and give rw permission to all. then restart services of portmap and nfs.
4 then on login with xen kernel and on terminal i give virt-manager command and follow steps. at last i get above error. where i m wrong,clearify me so i make vir m/c .
I want to experiment with pacemaker, and for that I'd like to start kvm virtual machines with the snapshot option, so that as soon as I stop the vm, all changes are gone and I can start over. Since I couldn't figure out how to setup networking (vm - vm and vm - public) with a kvm commandline without disturbing the Network Manager, I used the Virtual Machine Manager (VMM) for this.
It works now, but I cant see how to use the snapshot option with the VMM. On the other hand, I cant see how I start the resulting vm from the commandline. When I look at the process list, I see the command with these network options:
It complains that it can't connect to localhost because probably libvirtd is not running. Well it is running, so please share your wisdom with me. Here is error message:
I am running Windows 7 inside Virtual Machine Manager - running on Cent OS 5.6. My problem is that the Windows 7 'Window', is only about half the size of the screen. Is there any to change the resolution of the OS running inside Virtual Machine Manager?
Are there any open source Virtual Machines which have web based administration. I am setting up Ubuntu 10.4 x64 and would really like to find a usable virtual machine manager. I really like Virtualbox but only the full version has web based administration. I have also tried VMware but it isn't open source.
I'm trying to set up a virtual machine environment in Centos5.5. My hardware fully supports virtualization, and I'm running qemu as the hypervisor with Virtual Machine Manager as the GUI to manage and create VMs. Host hardware is a Dell PowerEdge T710, with a quad core Xenon processor and four 1TB disks in a raid 6 array.
Within the Virtual Machine Manager when trying to create a new VM, there is the option to not "allocate entire virtual disk now". What format is created when you "allocate entire virtual disk now" and when you don't?
I want to create a qcow2 image format, but it doesn't look like it is supported. Does anybody know how to create a VM with a qcow2 image format?
When you create a blank disk with "qemu-img create -f qcow2 disk.qcow2 3700G", it indeed does create a qcow2 image. However, Virtual Machine Manager is unable to read these images, claiming that it is 15 megs or so in size (which is what it actually occupies in host disk space until you try and put a VM into it).
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
How to boot from iso in Virtual Manager manager I know I can create new machine to boot from it. but I just want to know if there is something like "change boot device" "boot using iso image" in virtual machine manager
how do I set up a virtual machine in Fedora 14? Do I do it through Quemu? I did not see Virtualboxose within the repositories. If some one would be so kind as to instruct me (please simple step by step instructions for setting up a virtual machine or for downloading and installing Virtualboxose or any other version of Virtualbox I would forever be indebted to you. I would like to install Fedora on my laptop instead of Ultimate Edition 2.8 of which I am getting tired of any Ubuntu based distribution.Oh by the way I tried the new Gnome 3.0 shell with Laughlin 15 and I was impressed. I can't wait til it is released. Also could someone point me in the right direction as to where I might ask, request, or just offer suggestions for software packages to be placed within the repositories.
I have a reader program which runs only in windows. Now I have a windows xp installation iso on one of the partitions. How can I set up a virtual machine environment of windows xp, so that I can run windows programs? I've tried wine but I cannot figured that out. I think a virtual machine is the choice. but do I also need install those drivers and microsoft stuff, like direct X 10?
I am experiencing a multicpre problem with fedora14 / kernel 2.6.35.6-45.fc14.x86_64 #1 SMP. (standard from the distro). The host has a total of 2 cores .yet a virtual machine started with 'smp 2' ( or xml : <vcpu>2</vcpu>) will not run on 2 pyhs cores . it will use just 1 core ('top' at the host shows 100%cpu while running an endless loop process on the VM) and libvirt 'virsh vcpuinfo <vm name>' shows only 1 physical cpu used (although 2 vcpus are used : 0, 1) The kernel seems to be an SMP one ( so says the uname -a . what does '#1 SMP' mean ?) . Am I missing something ? same XML on a DEBIAN machine will run the VM with 2 phys cores as should although the host there has 4 cores (>2)Should I recompile the kernel src with some addtional flag ?
I used qemu sucesfully on F9 but I can't find it on F10. I can't create a virtual machine. I tried installing qemu from rpms that I found on their site without any luck. How can I create a virtual machine on F10?
We have a virtual XP machine on our fedora 11 install. I want to drop fedora 11 down to init3 (since its a server anyway) and everyone is worried about the windows virtual machine dying. What would happen to my windows virtual machine if I drop the host server to init 3?