Software :: Compile ASC And Can't Manage To Get LUA 5.1 Recognized?
Oct 31, 2010
I'm trying to compile ASC (Advanced Strategic Command). Why compile it? To gain experience and for fun.I'm running slackware 13.1.So I do ./configure, & then it says that it needs LUA 5.1. So I get LUA, do make linux & then make install, and the LUA program is there (I can run it), as well as an empty directory called /usr/local/lib/lua/5.1. But ASC still says the same thing as before:
ASC requires the LUA 5.1 library.ou have a distribution supplied LUA 5.1 package installed, perhaps the LUA 5.1-devel package is missing.If your distribution does not include the LUA 5.1 library, you can get it from Thinking that the problem might be because a library was required, I followed some links on the lua site,ile called lua5_1_4_linux26_lib.tar.gz. I moved the files from the tar to the empty directory. Still no luck.
View 4 Replies
ADVERTISEMENT
Aug 3, 2010
Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
View 5 Replies
View Related
Sep 18, 2014
I have a backup HDD with a different distro for my laptop and i can boot into it via external usb or if swapped into the laptop. This HDD/install in question is debian testing and was working fine, the issue arose suddenly. I was first suspecting a failure of hardware somewhere on the motherboard, but the hdd i was using with an external usb adapter also works when installed into the machine. also, the HDD is recognized once i have booted using the external HDD and distro, but it is not recognized by the bios. so i dunno, my first guess is something became corrupt within the testing install, but i guess its also possible that there is some wrong with the HDD but thats not immediately apparent as all the data is still accessible.
Should also note that the HDD with testing on it is also recognized when connected via the external usb adapter, while booted from alternative distro/HDD.
Also. just tried this, but i can get the testing HDD/disto to boot if connected externally. it was going pretty quick, but there i did catch a line about a corrupt filesystem. any commands to run to see what might be going on?? log files to look at?
View 0 Replies
View Related
Jun 2, 2010
I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
View 7 Replies
View Related
Mar 27, 2010
I was installing DYMOUM from [url]. "make" command is issuing this error:
Code:
Prior to this, ns-2.34 was working fine. Patches are applied very well.
I am in under fedora 9 and:
Code:
View 9 Replies
View Related
Jul 22, 2009
I'm trying to cross-compile glibc 2.2.3 for PowerPC 405 using ELDK 3.0 on a x86_64 machine.
I have unzipped glibc-2.2.3 in a temp directory and configured using:
The configuration seems to run fine but when I do make I get the following error:
This is the error in the config.log file:
I have installed the libgd package using apt-get install libgd2-xpm-dev and I also tried recompiling using libgd2-noxpm-dev package but I still get the same error.
View 2 Replies
View Related
Jun 11, 2011
Is it possible to manage the LED of the box (desktop) ? (I'd like to light off the main led when suspend rather than it wink at - I've looking for a LED entry in /proc bit find nothing)
View 4 Replies
View Related
May 19, 2010
I want to install xen on my server but I am very new to Xen. I have read various articles on google but it didnt made me understand too much about xen. Any link which explains how to install & manage Xen in simple language.
View 8 Replies
View Related
Jul 7, 2010
I will try to explain. My bank send to me a file which has extension .fm6, but which is, in reality, a zipped file. I have a program, which runs more or less well under wine, to open them.
Now the problem is: how can I associate this kind of files to the application? I mean, I can change the application for *all* compressed zip files, I know how to do it, but I do not want it. Just zip files that happens to have a name ending in .fm6 should be associated with them.
I know it's possible. In the end, openoffice.org files are really zip files (try it), and they are treated differently.
View 1 Replies
View Related
Aug 23, 2010
Looking for a way to control how much cpu apps are allowed to use. I'm 10.04 64bit dual core.
View 8 Replies
View Related
Oct 28, 2010
I'm looking for an effective way to manage use of internet bandwidth by users on a local area network. Currently there is a simple broadband router and unmanaged switch, and a standalone Ubuntu Server (8.04) that provides DHCP, DNS and mail for the LAN, and a web server. Ports are forwarded from a static external IP address to HTTP, HTTPS, SMTP, SSH and IMAPS, and some security is provided by IP Tables (managed by using UFW).
There are 5 users on the network, and currently one or two of those 5 are using beyond our monthly download allowance of 30Gb. 1) To be aware of how many users are currently using the internet connection, and to divide the bandwidth between that number (so that if there are, say, 3 active connections, the total bandwidth available is divided 3 ways, rather than one of those users being able to hog all of it).
2) To allow each user to download up to 1/5 of 30Gb each month without any additional throttling (apart from the above), but once they go over that allowance to throttle them individually to, say, 10Kbps until the start of the new month.
I've heard other threads talking about both IP Tables and a proxy server such as Squid. I have no idea which of these would be most suited to the task. Currently, as I said, the Ubuntu server is standalone and only using 1 NIC, but it has 2 NICs and I could be configured to act as a gateway for the LAN, instead of the router, which is set to be the current default gateway.
View 2 Replies
View Related
Nov 9, 2010
I installed ubuntu 10.04 minimial (just base packages), I have a desktop manager installed and was just wondering what the command was to install a gui to manage printers?
View 3 Replies
View Related
Dec 22, 2010
I want to use Vidalia to manage a TOR relay. My /etc/default/tor file references another file /etc/default/tor.vidalia. It's supposed to help manage the TOR daemon. For whatever reason, I don't have a file called /etc/default/tor.vidalia.
View 8 Replies
View Related
Jul 1, 2011
I'm trying to get my HP printer to work on Backtract 5 KDE (Ubuntu 10.04), I have installed 'system-config-printer-kde' and 'kde-printer-applet' plus the HP drivers but I think something is still missing cause I cant setup up the printer (clicking on add new printer I only have the option for network printer and new class printer) and if I try to print from any application there's only one option that is to file.
I'm sure there's a solution for this, I have searched a lot but can't find the list of packages necessary to manage printers.
View 9 Replies
View Related
Sep 15, 2010
I am using Fedora 13 and have an intermittent problem with the printer(HP d2540). Periodically, the printer will not finish a print job or the software leaves some form of command that interferes with the subsequent jobs. I haven't had much luck finding the print queue. Typically, the print jobs are coming out of the OpenOffice word processing segment and I am not sure whether there is an actual problem or simply a page formatting error.
View 2 Replies
View Related
Mar 7, 2011
I am using SQUID 2.6 on cent os. Squid as a proxy server is working fine. I want to manage my bandwidth according to my office staff.Like for top management users may allocate 1 MB and rest of the users as 256 kb.Kindly guide me that how can I do it ?
View 1 Replies
View Related
May 12, 2010
i'd like to know how many rule can manage iptable. I'm asking that because i'd to drop all traffric from my localnet to porn site. I've a database of porn site witch contain about 900 000 domains. I know there are solutions like squidguard. But for my linux box i'd to use iptable to prevent users access to porn site and other blacklist site.
View 1 Replies
View Related
Jan 22, 2010
i want to allow the user winny to manage users...i have added the following lines to the visudo file.
#user alias specification
User_Alias LIMITEDTRUST = winny
#command alias specification
[code]...
View 13 Replies
View Related
Jun 14, 2011
distros: suse 85% / redhat 15%
Anyone use novells ZLM to manage their Linux environment? if not what do you use? (patching, config etc) and how do you like what you use?
View 1 Replies
View Related
Aug 26, 2011
Running Wheezy with an XFCE desktop. Is there anything I can install to manage users and groups from a gui
View 2 Replies
View Related
Jan 30, 2016
I tried Google and searching here to no avail...
Running Debian Jessie 8.3
Linux 3.16.0-4-amd64
KDE SC Version 4.14.2 with plasma
I am trying to remove some icons from the "taskbar"/panel and find the only real options are adding MORE widgets, adding another panel, or deleting the whole panel.I simply want to remove a duplicate and re-arrange the icons without having to delete the panel, add another panel, and careful add, in the order I want the icons, the widgets right-click on the panel and I get "Task Manager Settings ALT+D,S" and "Panel Options" which offers no visible means of managing the panel.I condemned to deleting the panel and starting over?
View 3 Replies
View Related
Mar 25, 2009
How can I make iptables allow my windows client to see my PC / smb shares? When I turn off the fedora firewall it just works fine, but how can I manage smb in a more secure way via iptables to work?
Code:
iptables -A INPUT -s 192.168.0.0/255.255.255.0 -j ACCEPT
But where do I get the correct address from? Will this example allow only 192.168.0.0 (is this a valid IP at all, usable by any PC? ) or anyone in the network (aka 192.168.0.*) to access my share?
View 3 Replies
View Related
Sep 22, 2009
I try to use fedora 11 as my home server. The server should be remotely managed by VNC. A normal VNC-setup does not allow to log into the login screen, but that is what I need !!
Notice that I would like to maintain the sever using the normal gnome gui. I have been investigating lots of options to get VNC running this way, have been searching all over, but did not find any working solution. All solutions I found where based on XVNC which is not available for fedora 11 as far as I know.
View 1 Replies
View Related
Jun 3, 2011
I'm using Fedora 14 with gnome as my GUI.As you know , there's gui tool which manages network adapter , either wireless or wired.After every login into fedora , I should click on network manager icon on taskbar and choose System eth0 to establish and enable eth0. I want it to be done automatically.
Previously , I used opensuse 11.4.It has a tool in yast which allows you to choose how to configure your network adapters , traditional or knetworkmanager mode.I can't find this like tool in gnome on fedora.
how I can configure network adapters to start or not during startup?
View 1 Replies
View Related
Aug 5, 2011
I have been troubleshooting for some time but do not manage to get my sound working on FC15. I want to use the integrated sound from my motherboard ASRock 890GX Extreme3 and I am testing it with the headphones on the front output. I noticed I can get sound from the motherboard output on the back (front audio should be wired as well though, it does work in Windows). My ALSA information can be found at: [URL]
View 5 Replies
View Related
Sep 4, 2011
Wallpaper, with a complimentary color scheme for windows decoration, and icons and sound effects inspired thereby, loaded as a set. Is there an app that does this for KDE? It seems like linux gives me more options, but without an important tool to utilize them. I'm sorry to bring a question here that's probably been asked many times over the last dece, but the likely hits on "theme" and "windows" has overwhelmed my search fu.
View 4 Replies
View Related
Jan 22, 2010
I recently downloaded the i686 11.2 and right before it seems as though the Live CD is going to load, with the cursor and the black screen present, it takes me straight to 'linux login'. It states that runlevel 5 has been reached, the failed services in runlevel 5 are postfix and the skipped services are nfs if that's of any significance. I have no idea where to start; looking around it looks as though this is a graphics card issue. My laptop has Intel X3100 integrated video. How can I manage to get the LiveCD working?
(Also, if let it sit at the login for a while, it says "usr/sbin/stop_preload: line 4: /usr/bin/killall: Input/Output error)
View 9 Replies
View Related
Aug 3, 2011
How do I divide my hard drive into multiple OS'es/partitions for my test machine? For example:
Win XP
Win 7
Gentoo
Ubuntu
Storage
Can Linux'es share swap area? I was told to leave the first primary for the grub and linux cores.
View 1 Replies
View Related
Jan 4, 2010
I'm running Ubuntu 9.10 together with Windows 7 and when I launch Nautilus I have a list of all my (Windows) partitions in the navigation bar on the left. However I don't want to see all those partitions in Ubuntu (eg. the Windows system partition or the partition reserved for the Win boot loader. Is there a way I can control which partitions will be detected and listed for mount in Nautilus?
View 3 Replies
View Related
Jan 13, 2010
I have a LAMP server running Ubuntu 8.04.03 Server edition running smoothly. Ive setup several websites on the server and all are ok, but I constantly have trouble with permissions. Everytime I setup a new domain to host, I setup a user specific to that domain. This allows SSH login specific to the domain. The problem I have is that every time I setup ownership in the virtual directories for the users they belong to, the settings don't seem to stay. Initially it seems to work ok, but when I install Joomla and setup the webspace, I always seem to have to login to the server itself to chmod the folders I need to have writable. I cant chmod properly from my FTP client which is weird. How to manage permissions?
Currently I am doing the following:
Code:
sudo mkdir -p {name of domain}/{public,private, etc...}
sudo usermod -g www-data {my user name}
sudo chown -R www-data:www-data /var/www/{directory for the domain}
sudo chmod -R 775 {folder path I need to change}
This works for a while but as I add new things to Joomla and I want to modify the folders, I always have to go back and redo the chmod and the chown commands to get them where I want.
View 4 Replies
View Related