Software :: Change The .iso In Virtual Cdrom After Qemu Is Started?
May 16, 2011How to change the .iso in virtual cdrom after qemu is started?Host is Debian, ctrl+alt+2 doesn't work.
View 6 Replies
ADVERTISEMENT
Fedora :: QEMU: Booting From ISO Image - Boot Failed: Could Not Read From CDROM (code 0004)
May 3, 2011I'm running Fedora x86_64. I need to setup a virtual machine to do some work on ARM platform. Thus, I've installed QEMU.
Code:
qemu --version
QEMU emulator version 0.13.0 (qemu-kvm-0.13.0), Copyright (c) 2003-2008 Fabrice Bellard
Then, I have dowloaded an ISO image of Debian 6.0 armel.Following instructions on official wiki, I have first created an empty disk image,
Code:
qemu-img create -f qcow debian-armel.img 650M
then I have attempted to boot from ISO image;
Code:
qemu -m 512 -hda debian-armel.img -cdrom debian-6.0.1a-armel-CD-1.iso -boot d
Boot process hangs with the message:
Code:
Booting from cdrom...
639 medium detected
Boot failed: Could not read from CDROM (code 0004)
No bootable device
link refers to Fedora 12, but it seems still unresolved...
Fedora :: Can't Create Virtual Machine With QEMU/KVM
Nov 8, 2010I just install QEMU and virtual machine manager to use virtualization, but virt-manager cannot run properly. I can create a VM, then mount CDROM ISO, startup. With Windows installation, it runs well until format partition step, after that it is disconected and exit with error related to VNC. I dont know why have this problem cause the packages that I installed is from Fedora repo and I think they have been tested.
Here are some infos:
Fedora 14 - kernel 2.6.35.6-45.fc14.i686.PAE
qemu-2:0.13.0-0.7.rc1.fc14.i686
libvirt-0.8.3-2.fc14.i686
virt-manager-0.8.5-1.fc14.noarch
CentOS 5 Hardware :: About Qemu Kvm Virtual As A Intel Cpu?
May 15, 2010inter x5405 cpu , centos5.4 x64 , qemu kvm ,kvm setup win2003x64 os, kvm show a qemu virtual cpu,but i will install some software need intel cpu ,it is show need amd/other file support. can i config it as a inter cpu?
View 1 Replies View RelatedDebian :: Virtual Networking In Qemu / Add Interfaces To Two Networks
Sep 5, 2015I just installed qemu and want that my VM should have net access too. So for that I installed bridge-utils and used URl....Add both the interface with the second computer, and the interface that leads to the existing network. Do it with this command: # brctl addif br0 eth0 eth1
View 1 Replies View RelatedUbuntu :: Remove 2GB Virtual Drive Created With Qemu?
Jan 23, 2010I installed Windows XP on my system using QEMU as a 2GB virtual drive in my home directory. I don't want to have it anymore, however I can't get rid of this 2GB used space with windows XP. I can't even delete QEMU, because the command sudo apt-get remove qemu tells me that package qemu is not installed. (however it is there, works, and is able to start Windows XP as usual).
How can I get rid of this qemu/Win XP and have 2GB of my home folder available again?
OpenSUSE :: Virtual Machine Manager Vs. Qemu-kvm Commandline ( Tap Xor Snapshot )?
Mar 28, 2011I want to experiment with pacemaker, and for that I'd like to start kvm virtual machines with the snapshot option, so that as soon as I stop the vm, all changes are gone and I can start over. Since I couldn't figure out how to setup networking (vm - vm and vm - public) with a kvm commandline without disturbing the Network Manager, I used the Virtual Machine Manager (VMM) for this.
It works now, but I cant see how to use the snapshot option with the VMM. On the other hand, I cant see how I start the resulting vm from the commandline. When I look at the process list, I see the command with these network options:
Code:
-netdev tap,fd=21,id=hostnet0
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:45:30:b0,bus=pci.0,addr=0x3
-netdev tap,fd=22,id=hostnet1
-device virtio-net-pci,netdev=hostnet1,id=net1,mac=52:54:00:84:5b:bc,bus=pci.0,addr=0x6
How would I go about these fd=nn things on the commandline? I guess I somehow have to start the tap devices before, but how?
Red Hat / Fedora :: Correct A Glitch With Qemu-KVM That Prevents Virtual Machines?
Jul 21, 2010Is anyone familiar with how to correct a glitch with Qemu-KVM that prevents virtual machines (Windows Server guests) from starting after the Linux host has been rebooted? It gives an error constructing a domain in /dev/sr0 because of /usr/share/virt-manager/virtManager/engine.py line 493 [run_domain vm_startup], /usr/share/virt-manager/virtManager/domain.py line 573 [startup self.vm create()] and /usr/lib/python2.6/site-packages/libvirt.py line 287 [create if ret=-1 raise libvirtError].
View 1 Replies View RelatedGeneral :: Write Qemu Booting Virtual Machine Output To A File
Apr 11, 2011I've been trying out qemu to play around with some VMs. It's working well but I keep wanting to be able to view the text (linux boot process) that quickly scrolls by in the qemu window on startup of my linux virtual machine. Is there any way to retrieve this via qemu?
View 1 Replies View RelatedCentOS 5 Server :: Error: File /usr/share/man/man1/qemu-img.1.gz From Install Of Qemu-img-0.10.5-1.el5.2.x86_64
Feb 6, 2011When I try this yum install kvm qemu libvirt python-virtinst qemu-kvm I become this error
Transaction Check Error: file /usr/share/man/man1/qemu-img.1.gz from install of qemu-img-0.10.5-1.el5.2.x86_64 conflicts with file from package kvm-qemu-img-83-164.el5_5.25.x86_64
how can I resolve this error
General :: After Qemu-img, Qemu Is Not Capable To Detect The C Drive (empty)?
Oct 16, 2009qemu-img , create any imagerun qemu -fda bootdiskwin98se.img -hda image.imgand No drive C what's going wrong with qemu-img/qemu?
View 3 Replies View RelatedGeneral :: Change The Floppy Image Of Qemu?
Jan 18, 2010I'm developing my own OS, but I'm having some problems with Qemu, because I need to change the floppy image from grub.img to os.img while the emulation is running, but how can I do this?
View 1 Replies View RelatedGeneral :: Qemu / KVM Automatic Screen Resolution Change
Jul 10, 2011I have been using VirtualBox for really long time, and personally I like it a lot, specially the screen resolution auto change to fit the window size. Lately I have moved to qemu/kvm for the sole reason to learn kvm, I have been missing different things from VirtualBox, but Am trying to stuck with It for now as I said just to learn It. Now to my question, Is there a way to get an automatic screen resolution change to fit the window size of the VM like what I get in VirtualBox?
View 1 Replies View RelatedCentOS 5 :: Vmnet1 Hostonly Network Cannot Be Started After Change The Kernel
Sep 3, 2011We are using vmware server 1.0.10, centOS distribution 2.6.18-238.12.1.el5PAE.
We started the vmware service successfully, however, while we do ifconfig, we did not see vmnet1, and we do ifconfig vmnet1 up, we see that vmnet1:no such interface.
Ubuntu :: No Sound In KDE When Started By Startx While Working Fine When Started By Kdm/gdm
Dec 14, 2010I recently installed KDE in my ubuntu 10.10. To access KDE, I want to use
startx /usr/bin/startkdeBut using it disables sound in KDE (Sound is working fine in GNOME). It doesn't sound for anything like login sound, totem, mplayer or any other playerBut when I press Alt+Ctrl+F1 to change to virtual console, the playback resumes from where it was in time and when coming back Alt+Ctrl+F7 and the time in totem (or any other player) doesn't move. While log out also it doesn't play logout sound and doesn't logout, so I have to press Ctrl+Alt+F1 so that logout sound play then it exits.When starting KDE by kdm or gdm, the sound works normally. But I don't want to login again using kdm or gdm and not to use root user to start kdm or gdm.I don't know what is the difference between when KDE is started by startx or by kdm/gdm where the same user login in kdm/gdm as that for startx
CentOS 5 Hardware :: Change CDROM Drive To DVD Drive?
Mar 31, 2009I exchanged my CDROM drive for DVD drive. The DVD is recognized in the BIOS (will boot to DVD install disc) and in CentOS 5.2 (when I list the hardware), but CentOS must still think it's a CDROM drive. When I run VLC in a terminal it kicks back these errors code...
I think this means that "hdc" is linked to a CDROM configuration somewhere, but I don't know where to find it to change it (or out it). It also appears thee is no DVD module loading. (Of course, I could be making poor guesses.)
I thought there might be something in the fstab, but it doesn't appear there is anything there (for the CDROM or DVD drive)?
Is there somewhere else I should be looking? /dev/*** ?
Ubuntu :: Error -->mkdir -p "/amn/symbian/gcc/sf/adapt/oss+FCL+adapt+qemu.hg/symbian-qemu-0.9.1-12/bin"
May 23, 2011when i apply this command $ make install --> that for build qemu for symbian in ubuntu i face this error -->mkdir -p "/amn/symbian/gcc/sf/adapt/oss+FCL+adapt+qemu.hg/symbian-qemu-0.9.1-12/bin" mkdir: cannot create directory `/amn': Permission denied
View 2 Replies View RelatedGeneral :: Boot A Cdrom From A Mobile USB Cdrom (old Bios, Without Usb Boot)?
Aug 29, 2010I have been trying plop floppy to boot a bootable cdrom from a mobile USB cdrom reader, but the usb cdrom are not recognized.I was thinking that with grub or grub2 or syslinux that would be possible, no ?
View 13 Replies View RelatedGeneral :: To Change Font In Virtual Console
Jul 14, 2010Is it possible to change font in Ubuntu's Virtual Console and make it as it is in SystemRescueCD's Virtual Console?
View 3 Replies View RelatedUbuntu :: CHANGE DEFAULT LOCATION OF VMWARE VIRTUAL Pc
Feb 2, 2011I have installed vmware server 2.0.2. when i am creating a virtual pc it stores in my root(/) directory which has a small space free.....so i wanted to change the location of virtual pc in another hard drive. main thing i wat to change location of virtual machines from (/var/lib/vmware/Virtual Machines/) main hdd to (/home/usrename/anotherdir)another hdd
View 2 Replies View RelatedUbuntu :: Change Virtual Terminal Colors Before Logging In?
Apr 17, 2011I put
Code:
echo -e 'e[0;34m'
into /etc/profile, but it still doesn't work until I login. I'd like it to work before that, so that all messages (like those displayed on boot up) have these default settings.
Fedora :: Wine Fullscreen App Shrinks On Virtual Desktop Change?
Jun 5, 2010admit I don't know everything and right now I am at my wit's end trying to figure out this one.The system is: F13 x86_64; GNOME (compiz turned off); wine-1.1.38-1.fc13.i686 and nvidia er from RPM Fusion xorg-x11-drv-nvidia-195.36.24-1.fc13.x86_64The problem is: When I run a fullscreen app in Wine, switch virtual desktops and switch back, the fullscreen app has shrunk. This did not occur on F12 prior to upgrading to F13.The app itself seems to have not noticed it was resized; on checking its configuration panel it seems to still think it's running full screen.What I want to know is whether the problem is in Wine, the video driver, or the window manager, or somewhere else, so that I can report it to the right people (or just fix it).
View 2 Replies View RelatedGeneral :: Change The Screen Resolution Of Puppy Running With Virtual Box?
Jun 18, 2010I am running Puppy from a usb in Windows 7 using Virtual Box and I can't get the 1280 x 800 screen resolution to work. The probe doesn't recognize my monitor initially in the video setup. When I choose this screen resolution in the xorgwizard it ignores the resolution I select and uses 1600 x 1200. If I try to reduce the resolution in the resolution changer, it decreases the window size but the desktop stays at the same resolution effectively cutting off the majority of the desktop from view. I have been trying the intel, radeon, vesa, and vmware drivers but none of them seem to work. Do I need to install a special video driver? I am using a unibody macbook.
View 3 Replies View RelatedCentOS 5 :: Change Virtual Machines Storage Directory In Centos5.5?
Oct 15, 2010I installed centos 5.5 Ent as host and i installed vmware server 2.2. i need to Change the location of the 'Virtual Machines' directory(/var/lib/vmware/Virtual Machines) to a directory on /home(/home/Virtual Machines) where there is more disk space.Reinstalling centos and reinstalling Vmware server is not the option for me.
View 4 Replies View RelatedOpenSUSE :: Change The Resolution Of The OS Running Inside Virtual Machine Manager?
Jun 7, 2011I am running Windows 7 inside Virtual Machine Manager - running on Cent OS 5.6. My problem is that the Windows 7 'Window', is only about half the size of the screen. Is there any to change the resolution of the OS running inside Virtual Machine Manager?
View 6 Replies View RelatedGeneral :: Change Virtual Screen Resolution On Ubuntu (connecting Via VNC Without Real Display Connected)?
Aug 29, 2010I have an Ubuntu server with no physical access to it, only via ssh/vnc.
It is stuck on a 1680x1050 resolution and in the system display settings the menus are disabled since there is no detected real display connected.
I need to lower the resolution to e.g. 800x600. code...
Fedora :: Create A New VM With Qemu-kvm From Iso?
Jul 27, 2011After patiently waiting for 30+ hours during install attempts with the "Virtual Machine Manager", I realized that it wasn't going to happen. So then I read about a possibly working version, qemu-kvm How to use this to get a VM install up and going ? For instance, this command appears to begin an install, but where does it actually create a vm image from that?
qemu-kvm -m 512 -cdrom /iso/Fedora-14-i386-DVD.iso
General :: DSL QEMU SSH Not Working/
Sep 29, 2010I am using DSL thru QEMU. I was able to install it to a hard drive image.I started the SSH Service but I'm not able to connect to it from my Win 7 box via putty. I've edited the hosts.allow file to ALLOW external usersI've turned on the 22 port on my win 7 box firewall.
View 1 Replies View RelatedSlackware :: VDE Networking In QEMU?
Feb 27, 2011ive been struggling with this for the past 4-5 days, and finally give up trying to solve it by myself. ive been following the guide here: [URL].. everything works up until i get to the iptables command, when i put it in, i get the following message:
Code: iptables v1.4.10: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. this led me to believe that i did not configure my kernel correctly, so i rebuilt my kernel, building in all the modules that were listed. unfortunately, the only ones that were actually present in the make xconfig were
[Code]...
Debian :: Upgrade Qemu And Kvm On Repo?
May 26, 2010how to upgrade qemu and kvm to version 0.12 on repo?
$ sudo kvm | head -1QEMU PC emulator version 0.9.1 (kvm-72), Copyright (c) 2003-2008 Fabrice Bellard
$ apt-cache show qemu-kvm | grep VersionVersion: 0.12.4+dfsg-1~bpo50+1