General :: To Change Font In Virtual Console
Jul 14, 2010Is it possible to change font in Ubuntu's Virtual Console and make it as it is in SystemRescueCD's Virtual Console?
View 3 Replies
ADVERTISEMENT
Debian Multimedia :: Save Changing Font In Virtual Console?
Jul 14, 2010I wanna save font from SystemRescueCD's VC and set it up in Ubuntu's VC. How to save it? 'Man' doesn't make it clear to me. Is it
setfont -o [file]
or
setfont -O [file]
to save the font?
Ubuntu :: 9.10 64bit + Radeon HD3200 + Font Size At Virtual Console Is HUGE
Feb 14, 2010I've read so many howto's and threads but never managed to get a decent font size on my tty's. Before grub2 I used to use vga=795 (or something like that), but now that isn't working anymore. I have a 24" Samsung screen and the font size is HUGE. Has anyone with same hardware succeeded in setting a decent resolution? I've played around with gfxpayload and all that stuff. I'm using fglrx driver on an up-to-date system.
View 3 Replies View RelatedUbuntu :: Change The Console Font?
Jul 11, 2010Not the gnome-terminal fonts... That's easy... How about the font faces on tty1-6? I tried Slackware once... It was way back in my Linux experience so it struck to me as a clumsy and ill-managed operating system despite that the fact is the exact opposite... Well, as it appears, Slackware did have something about changing the console font since it mostly focused on terminal, you know, it booted up in terminal by default, for starters. Anyway, since Ubuntu is Linux as well, I guess there must be some way of changing the font face for the terminals, eh?
View 3 Replies View RelatedDebian Installation :: Squeeze - Change Grub Password And Console Font Size?
Nov 5, 2010I'm trying to do is protect the computer against housemates. The standard procedure I do with Lenny:
1. Password protect BIOS.
2. In BIOS, always boot from hard drive. Disable booting from any other device such as USB or CD-ROM.
3. Password protect Grub (v1) using the "password --md5 $1$9MuaA/$5TDLgvmcEiCWNr5W9VaMK1" syntax in my menu.lst file.
With the above precautions in place, [I think] the only way to gain root access to the system is to take the case lid off and proceed to do stuff physically (like set jumpers and/or take out the hard drive). Am I correct? My reasoning for this is, the computer boots -> must boot from HD -> must load Grub -> must go to default menu item since others are protected, and cannot command prompt in Grub without password.
Anyhow, In Squeeze, I was a bit disappointed to find out, after doing a bit of Google-research, that Grub v2 (which is standard on Squeeze now) does not easily support password protecting the Grub menu. Am I correct? Will this issue perhaps be addressed in the Squeeze final release? Is this feature dumb anyways because the Grub password is of no use (i.e. my paragraph above is complete horseradish)?
Another thing I would like to do is change the console font and size back to something more "normal" or "classic", not some crazy tiny font that's only found in totally bleeding edge Linux distrubutions <gasp!>. I found that the Squeeze console font (e.g. when I type Ctrl+Alt+F1) is wicked tiny. I wanna change it to "normal". Grub v2 password and console font config?
General :: Increasing Font Size In Console
Feb 26, 2011I am using ubuntu lucid.as a desktop and don't run a server. The editor I use is vim so increasing font by edit > profile preferences. What I need to know is how to increase the size in console ie. when I use Ctrl +Alt + F1 to F6. On running xrandr I get this :
[Code]...
I know that,the graphical user interface ( using X windows , I think ) sits on top of the base system ie F1 to F6. In the Fs , xrandr replies "Can't open display ". The question is am I right in thinking that "gui" is totally independant of the base ( is that the correct word ?). I have read that messing about with resolution can wreck a monitor ( I'm using a laptop) , is there a safe way to proceed?
Fedora :: Upgrade To KDE 4.4 And "Configure Kmail" Displayed In The Default Font No In Console Font
Feb 25, 2010In all previous versions of KDE I had Console8x16 set as KDE font for all cases (Settings->Appearance->Fonts). After tonight upgrade, this (only!) font is not working. I can see it in font manager, I can set it in ...Appearance->Fonts, but actually remains default font. Two of about 30 attempts somehow (can not reproduce) succeeded to set "console 12" font, but it disappeared after restart.
1. What can be the problem in 4.4?
2. In /usr/share/fonts tere are 3 files named console8x16.pcf, console8x8.pcf and console9x15.pcf, but in the font list in Appearance->Fonts I can see only 2 - one named "Console" (seems to be 8x16 and "console" (8x8). File 9x15 does not appear at all. Why?
Last results of attempts: cannot use console font in part of areas, while part works OK. For example: kdevelop editor, kmail message body text works OK. But kmail other parts - does not. The most interesting is that although setting the kmail body message text to console displays the message body text correctly (with console font), but the example message in "Configure kmail" dialogue "The Quick Brown Fox Jumps Over The Lazy Dog" is displayed in the default font, as if there is no console font!
General :: Cycle Between Three Directories, Always In The Same Virtual Console (VT)?
Nov 18, 2010I want to cycle between three directories, always in the same virtual console (VT). Just the case of 'cd -' but with three dirs instead of two dirs. Can this be done by simple means?
View 2 Replies View RelatedOpenSUSE :: Can't Change Font - Font Size FIrefox 3.6.8
Aug 16, 2010I can't change fonts in Firefox preferences (Content).
My OS is openSUSE 11.3, KDE 4.4.4. release 8.
Any type and size of font I use, nothing happens. It's still same font which I choose for the first time I've started Firefox afer installing openSUSE 11.3.
General :: Possible To Change VIM Hardcopy Font?
May 30, 2011When printing from VIM, is it possible to choose a font other than Courier 10 for the hard copy output? For example, the following commands produce the same postscript file:
:set printfont=Courier 10
:hardcopy > myfile.ps
OR
:set printfont=Courier 8
:hardcopy > myfile.ps
OR
:set printfont=Luxi Mono 8
:hardcopy > myfile.ps
It says in the help for printfont that the font NAME (i.e., the typeface) is ignored (which seems stupid, but at least they tell you that) but the SIZE is not. The part about the size not being ignored seems to be a lie. More importantly, is there a way to change the output typeface to something else?
Debian :: Set The Beautiful Font Of Console?
Mar 20, 2011Now I know that I could use "consolechar" command with option "f " to set other fonts temporarily. The problem for me now is that I had tried almost all of those fonts in directory /usr/share/consolefont/, but I could not find a suitable one, none of them are beautiful. So, I hope one can tell me how to get the fonts and how to set the font I like to be lasting.
View 1 Replies View RelatedFedora :: No Console Font After Upgrade To 4.4
Mar 5, 2010That is - most of the applications using console (8x16) font does not display it after upgrade to KDE4.4, including "System settings->Font installer". kdevelop (kate), contrary, still sees it, and one-two more applications...
View 1 Replies View RelatedFedora :: How To Increase Console Font
Aug 19, 2011I need a really large console font! I used ter-v32n.psf.gz but it is not large enough for what I need. Anyone know of anywhere which I can download a few of them.
View 3 Replies View RelatedProgramming :: Get Console Font Color
Jun 20, 2011I've coma across a problem I have not been able to solve myself. Is there a function in the linux API similar to GetConsoleScreenBufferInfo() on Windows? refer to: http://msdn.microsoft.com/en-us/libr...=vs.85%29.aspx
I only need to get the current color settings of the active terminal.
Red Hat :: Set Console Font (corrupted After Yum Update)?
Mar 11, 2009I'm running RHEL 5.3 on one box at work; after the initial installation, the console font was fine (although it was visible in only one of two monitors: dual-head was configured automatically).After the first yum upgrade (which brought in dozens of packages), the console font became almost unusable. At first I can log in (say, on TTY1), but after the next few keystrokes every blank part of the display is changed to a capital G with a caret. Also, stdout (in some cases) is in an unreadable (for me, cyrillic maybe?) font. (And now the same - corrupted - display is visible in both monitors) I can't find the command to choose another console font. Looked in the "system-config*" type scripts to no avail
View 1 Replies View RelatedGeneral :: How To Change Xterm Font Size
Nov 17, 2010I was wondering how to change the xterm font size and may be the font itself. Also we go to tty1 when we press Ctrl+Alt+f1 , f3 and so on. Is there any way I can change that too and maybe change the colour of the font and the size of it. I did change the resolution once in ubuntu with startup manager. I'm using fedora 14.
View 13 Replies View RelatedDebian :: Squeeze's Console Font Is Too Small
Sep 10, 2010After reinstalling Squeeze's base system, the console font is too small to read comfortably. I tried to pass the kernel parameter vga=0x303 without success. After init starts the font reverts to a very small font that I cannot read comfortably on my 17 inch TFT LCD monitor.
View 7 Replies View RelatedGeneral :: Change Desktop Font From White To Black?
Aug 3, 2010How to change desktop font from white to black.
View 5 Replies View RelatedGeneral :: Any Way To Permanently Change Terminal Font Size
Jul 10, 2011I installed Ubuntu on my Netbook. I like it to use the Terminals. I don't mean the "GUI-Terminal-Emulators", I mean those I can open with "Alt+FX". There the font size is to big, so I changed it with "dpkg-reconfigure console-setup". It worked, but after restart the font were "reseted" and big. Is there a way to permanently change the font size?
View 4 Replies View RelatedGeneral :: Change Ghostview (gv) Menu Font Size?
Sep 27, 2010How to change the GV menu font size? (not the document font size which is set by scale). man and info don't mention anything about this.
View 4 Replies View RelatedSUSE :: Console Screen Font Very Small In Open 11.3
Aug 15, 2010What's happening to the console screen resolution in version 11.3? I have been using an 80x24 character console screen to run character based software and I want 80x24 to fill the whole screen. To do that, I have chosen "text mode" on the initial dvd boot up screen (F3 before choosing install). Choosing a higher resolution installation produces gui installation screens and results in console screens with progressively higher resolution, smaller type and more characters/line and lines/page, as the gui resolution increases. The installation resolution does not seem to affect the xwindows resolution. However, when I installed ver 11.3 using the text mode installation, the console screens alt-F1 to alt-F6 had very small text and the 80x24 text area fit in a small rectangle in the upper left corner of the screen. How can I fix this? My system is an Asus M4A785-M motherboard with a 2.8 ghz quad core athlon II, using the onboard ATI Radeon HD 4200 GPU.
View 6 Replies View RelatedDebian :: Lenny - Changing Console Font Size?
Dec 31, 2010So I set up that OS I was talking about, everything I need, staying away from the "Startx" command, and it's working very very awesomely except for ONE little problem. The console font size is too big for me, and honestly I don't know how to change that. Coming out of Ubuntu, I'm realizing I don't know as much about config files as I think I do :P
Any way I can change the font size? When I use the GParted live cd, I see a line in the start up that mentions changing the frame buffer to 700 x 48 or something, I'll get specifics soon (computer's not on me) and it makes the font and everything just how I like it.
General :: How To Change Console Keymap
May 29, 2011I want to exchange Esc and CapsLock in console (not in X environment), how can I do it? (My OS is Ubuntu)
View 2 Replies View RelatedGeneral :: Gentoo+urxvt+terminus: How To Change Font Version
Jun 27, 2011In my Debian installation I can type extended ASCII characters such as åäö by default using the terminus font, however in Gentoo I can't get it to work so far. Nothing happens when I hit those keys, like in this thread:Missing glyphs in Terminus font, how to setup a fallback font ? But in this case I know terminus supports those characters in at least some of its versions, since it's works in Debian. So what I want is to find out how to see and choose which of the many different terminus font files is being used. I set the font in the same way on both Debian and Gentoo, using URxvt*font: xft:terminus:size=xx in .Xdefaults. Both systems use en_US.UTF-8 as default locale.
View 1 Replies View RelatedUbuntu :: 9.10 - Console Resolution High And Font Size Small
Jan 3, 2010I am have upgraded from 9.04 to 9.10 in my laptop. After performing the reboot, the shell/console resolution went very high and the font size went too small. How to regain the old console shell resolution as in 9.04. I require this urgently as my laptop suffers the white screen problem. Switching between Ctrl+Alt+F6 and Ctrl+Alt+F7 I could get back the screen as the change in the resolution switches off and on the screen, so that I can negotiate with the white screen problem.
View 10 Replies View RelatedServer :: CentOS: Set Font Size/ Resolution On Main Console?
Mar 3, 2010I use CentOS and i need to set resolution or font size so that i can see more lines of logs at a time on the main console of my CentOS box.
View 3 Replies View RelatedGeneral :: Change Console's Default Monitor?
Mar 20, 2010Is there any way to specify which monitor the console is displayed on in Linux?
Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer.
I don't see a way in my BIOS to change the default video card.
Debian Configuration :: Squeeze Grub2 Made Console Font Green
Apr 1, 2010After an update on squeeze about a week or two ago, my console font turned green. I'm not exactly sure of the timing, because I switch between lenny and squeeze, and some time passed between the update and the reboot in squeeze.
During the update, I was asked if I wanted to keep my altered /etc/grub.d/00_header or take the package maintainer's version. I took the PM's version, knowing I'd lose my edit (set gfxpayload=1024x768x16). When I add that line to the new 00_header, run update-grub and reboot, the console font is the size I want, but it's a dull green. Reminds me of my first computer. How do I get it back to white and keep the 1024x768 resolution?
Currently booting with grub-legacy and chainloading grub2. If I boot entirely with grub-legacy, and pass vga=791, the console font will be white. It doesn't matter which kernel I use. Currently, I'm running 2.6.32-3-686. Same behavior exists if I use 2.6.30-2-686. If I use 1024x768x8 I get a dull gray instead of dull green.
Debian Configuration :: Console Font Size Under Squeeze - Grub Screen Is Very Tiny
May 17, 2011My Squeeze installation has the horrific 80x25 line display, and I cannot stand it. I know it can do better, because the grub screen is very tiny. I ran dpkg-reconfigure console-setup, but the offerings there aren't much better. I don't know what happened to the good ol' days of grub when all you had to do was pass vga=791 to the kernel to get a decent console size... but it seems they are gone.
I don't really understand this new v2 grub... I don't know why it was necessary to change how it was configured, when it seemed to work so exquisitely. how I would accomplish the functional equivalent of passing vga=791 (1024x768@75hz) to the kernel in grub
General :: Change System Console Screen Blanking Behavior?
Jun 14, 2010How do I change the screen blanking behavior on Linux virtual terminals?
For example, if I switch to a VT from X, login, and leave the system alone for 5 minutes or so, the screen will blank like a screensaver. It comes back with any keypress, like a screensaver.
Mostly I just want to change the timeout, but I'm also interested in other settings.
If it helps, one of my systems is running Ubuntu 10.04 with the stock graphics drivers. fbset shows the console using the radeondrmfb framebuffer device.