I am developing an application which has various modules; some pure fortran, some c++ linking to fortran, using g77 and g++. Does anyone know how to prevent 'fort.6' files being produced and put the output to 'stdout' instead? They are written by write(6,*) or write(*,*) statements. They end up in 'bin' which causes big problems.
View 1 Repliesi need to checkout a project from cvs fort a particular user i use the following command cvs -d server:francis:francis@cvs@10.200.2.23:/projects/aa_cesar co myproject when i do it using the eclipse it works fine but when i do it command line it does not checkout the reason is it takes cvs@10.200.2.23 unable to connect that is wrong username pasword credentials are given
View 9 Replies View RelatedI have had two instances recently where I was unable to log in to my computer with uid 500, but I could log in as root. In the first case, I could log in as user 500 to virtual terminals (ctrl-alt-F2, etc) but I could not log in to X. I found that, in the file /etc/pam.d/password-auth-acthere was an extra line that read"accountrequiredpam.access.so"I did not put that line there. When I removed the line, I could log in fine.In the other case, I could log in as user 500 to X, but could not log in to virtual terminals as user 500 (but could as root). I found that, in the file/etc/pam.d/system-auth-acThere was the same extra line as above. And again, I did not put it there, but when I removed it the problem was solved and I could log in to virtual terminals as user 500.I would like to find out, step by step, what happens when I enter my username and password in either a virtual terminal or in X. The login info must be passed to something that checks some files and then lets me in or not. How does that work?
View 1 Replies View RelatedI want to run a Web service that performs a lengthy calculation for the customer. If I let PHP perform the calculation, the script gets killed by server timeout. So I figured out it should initiate a batch job.However, the HTTP server process cannot initiate a batch job because user wwwrun is denied access to service at. Why is that so, and is it safe to remove this denial?
View 9 Replies View RelatedI have installed Wine on my Fedora 14 and got Security alert.SELinux has prevented wine from performing an unsafe memory operation.SELinux denied an operation requested by wine-preloader, a program used to run Windows applications under Linux. This program is known to use an unsafe operation on system memory but so are a number of malware/exploit programs which masquerade as wine. If you were attempting to run a Windows program your only choices are to allow this operation and reduce your system security against such malware or to refrain from running Windows applications under Linux. If you were not attempting to run a Windows application this indicates you are likely being attacked by some for of malware or program trying to exploit your system for nefarious purposes. My concern is if i hide this attempt, it will not stop wine to from trying to do it, only hide security alerts. This alert is occurred already nearly 5000 times in last 30 min and counting. Wine server is using 10% CPU on this, so only to hide alerts is not a solution, isn't it?
View 5 Replies View RelatedI get a SD card. Put in the SD reader. It's empty. I go to my super-important-pictures-to-a-monthly-relatory folder and select all files. Select them for MOVE. Paste them on the SD card. When the move/paste process is finished, i click on the "Eject" button on top of the SD card name. Card's ejected. I can't access the card anymore. I take out the card and put on my other computer. From 300 pictures, there are only 10 available, the remaining ones are there, but with 0bytes and unrecoveable. I panic. I go back to my main computer, my pictures are not there anymore. The pictures were on the Home folder. I panic again. I reset the computer and boot on the LiveCD. I install foremost, scalpel, photorec and about everything till my USB drive complains about being filled up. I run everything and I can't recover my files. I'm in the danger of getting fired. Things like that makes Windows sounds more appealing. When you securely remove a pendrive, things get REALLY pasted there before screwing everything up with a removal.
View 8 Replies View RelatedI know I can do find . -type f, but that includes binary file and I couldn't find a way to exclude them with find
View 4 Replies View RelatedI have installed this program ok but I am new to command lines in terminal.
I want to convert some wav files to wma files. I have the wav files currently in a folder called Test to make it easy. So I have entered the following command line:
ajpearson@ajpearson-laptop:~/Desktop/pacpl-4.0.5$ pacpl --to wma home/ajpearson/Desktop/Test and the error message I get is:
error: the following is not a file or directory: home/ajpearson/Desktop/Test
It does not matter what directory I use I get the same error. I am sure the answer is obvious - but not t me.
I have a Kingston 8gb Datatraveler that has been giving me troubles lately. For some reason after I delete files from it it still shows up as full and the files are shown in the hidden trash files. How do I get rid of these files? I can't delete them as they just show back up. Also, I tried to format the drive with gparted and it won't unmount. When I right click and select information, at the bottom it says: Unable to find mount point. Unable to read the contents of the file system. Because of this, some operations may be unavailable.
View 1 Replies View RelatedIs there a cc cleaner equivalent for linux to clear out tmp, internet files, etc.?
View 9 Replies View RelatedI am using the diff command with the -r option, to compare a large number of files and files in subdirectories. My main interest is to find out which files have been changed, and not what the actual changes are, and since a lot of files has been changed, it would be a lot easier to view the file names only. Is there and option for diff that might do this, or does there exist a similar tool/command that could do the job?
View 1 Replies View RelatedHow can you create a script to move or copy files from a main directory into multiple directories below the main directory.
View 7 Replies View Related1. Every Sunday2. Find all files older than 1 day3. Gzip these file4. Tar up the gzipped files into one tar file.5. Name the tarball with a date stamp indicating what day it was created, so we know that week's files are in the file
View 3 Replies View RelatedI have bought an external usb hard drive on which I back up my three computers every once in a while.Space will quickly be used up.I can't find that little bit of research that I need yesterday.Here is what I would like to find:An application that eliminates doubles in identical files and renames files that have changed by appending the last saved date yyyymmdd to the file name.Does such an application already exist?
View 6 Replies View RelatedUntil now i haven't had to dabble with bash scripts.
I have a program that reads in data files. These are named datafile01_R, datafile01_G, datafile01_B, they then increment, so datafile02_R etc i have about 600 of these. the program reads in 3 data sets at a time from each run, so files_01 r, g, and b.
The program then does its magic, and outputs about 40 different files, depending on the file, they gone to folders named R, G, B, psa, or tracking.
The program itself has configuration files to say where the files should gone when analyzed, there is also the config files that reads in the data sets.
At the moment i have to run one set of data, then go in and manually change the input file location, and run again. But, doing this, even though a different data set, the new set overwrites the old set in one of the output folders. So i need a way to increment the output filenames after they are written and before the program is run again with the new data set.
I've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
the VBO file that i want to burn into a dvd is around 7.9 gb. i want to know if it's possible to split them in order to burn the files into two diferent dvds.
View 5 Replies View RelatedI changed to wubi last night, i decided to go that way cause i was informed it was a safe way to try giving it a try for linux and ubuntu without any special effort needed to be payed and easily deleted if i am not pleased.Thankfully i am pretty satisfied with the results, i pretty much dealt with most of the issues i have faced so far successfully and i am running it ok beside one important thing.See i am using my laptop, which has a hdd of 250GB.On my Vista there are 2 different hdd C+E by default, they separated my hdd.So while i have windows on C and E is pretty much used for my additional data(see movies, music etc) when i installed wubi i installed it on E, thought it would be better and it had more space.
Now though, while i can access threw ubuntu all my files that were located on C(vista) i cant access any of the E ones, and search file dont helps either.The "vista hdd" as ubuntu describes it, its a 250 gb disk on computer, which means it should contain both of the vista disks.But sadly thats not the case.i cant seem to be able to find them anywhere.
What would be a nice, simple command to go through all files in a directory (no sub-directories), and change all the MP4 Video files I have to MP3 audio files (keeping the original filenames except for changing the "mp4" extension to "mp3")?
The files in question were videos taken with one of those Flip cameras, but I only need the audio off of it.
I have noticed that the files and folders search in Unity, only shows up those files which have been amended (or possibly just opened) since the install.
i was wondering if there was a way i could have the search index (or something vaguely equivalent) all the files on my machine. This is especially important given that i reinstall the OS every six months on a new distribution cycle, copying all my old files across.
Without being able to see my old files the search is pretty much reduced to a recent history search.
I found this command that works great finding and replacing a simple string to another in files located in that folder and all sub-folders.
Code: find . -name '*.php' | xargs perl -pi -e 's/OldText/NewText/g'
The problem I have is that I need to replace a more complex string, like this: Old string: /mnt/stor6-wc2-dfw1/627896/982574/ New string: /mnt/stor8-wc2-dfw1/369587/302589/ There I don't know how to do it... since the / is what separates the old from the new strings, and the strings that I want to replace have / in it. Also, I would like to know how to specify under what folder replace the files, for example, I want that it search/replaces all files under /var/www/mysite/htdocs folder.
I was reading [URL] which as the following in "Warning": Warning It is not a good idea to configure InnoDB to use data files or log files on NFS volumes. Otherwise, the files might be locked by other processes and become unavailable for use by MySQL. What does that mean, and how can one configure or check to ensure the above is being followed?
View 4 Replies View RelatedI want to automate this using script.How to automate it?
File1:
s.no# 1 name:aaaaaa
city:abcd
[code]...
I am used to Ubuntus simple sharing with samba. Just install it, reboot and then share the files.Then do I klick on network folder and see all the shared files on the computers in the network.
How do I install it so I only need to go into network folder and see the other computers shared files.Then, how do I share files?
I hope it's not so difficult and that I have to change i config-files.
I am new to Fedora.
i am downloaded some e-books in the format .rar. when i am extracting them i am getting error as There is no command installed for RAR archive files. Do you want to search for a command to open this file?
View 3 Replies View RelatedI am trying to dl the files located here: http://good.net/dl/bd/CCCamp-2007/video/m4v/ using wget.
Now when I use the command wget -r -A .m4v http://good.net/dl/bd/CCCamp-2007/video/m4v/
I get the just a bunch of filefolders, but no files, ex."cccamp07-de-1845-Freifunk_und_Recht.m4v" but its a folder.
On a KDE4 environment after downloading some music from rapidshare with JDownloader the archives self-extracted with the symbol in some of the file names. Those files couldn't be renamed or deleted, the file manager said that the files didn't exist - very weird. The files should have had some swedish characters in their file names. Now I'm stuck with those files on my machine. Anyone knows how to get rid of them?
View 2 Replies View Relatedthe permissions for my home directory were accidentally changed from 'access files' to 'create and delete files', and I changed them back, but ever since then I am not able to change any preferences/settings at all. power management, themes, panels, emerald, anything. my user account is supposed to be the administrator, and all the user privliges are checked. how to get control of my computer back?
View 9 Replies View RelatedIs there a method at the command line to copy files from one location to another and retain the source files group and user?I'm migrating some MySQL files from one machine to another.I want to back-up the original files in the directory presently. They have owner:group of mysql, some have owner:group root:mysql and so on. To copy them under cli or Nautilus everything changes to root for I execute sudo cp or gksudo nautilus and copy via gui.
Since it is MySQL data I could simply do a dump of the database and restore it on the other machine. But there's about 20 db's and I want to do this via a copy for it will be faster - at least that is what I think.
Fedora provides several compression techniques. E.g tar, tar.gz, zip etc. I want to know which among them provides
1. the best compression ratio for text files
2. the best compression ratio for binary files
3. fastest compression