Software :: Terminal Doesn't Display Failed Pings - Only Successful Ones - Debian Lenny
Sep 15, 2010
I am running Debian Lenny and just upgraded via "apt-get upgrade" yesterday and all appears to be fine, except I noticed that when I ping something from a terminal window, it only displays successful pings and does not show the failed ones. When the pings fail, I have to "Ctrl-C" to see the results and cannot see them in real-time. It's not a huge problem, but I'd still like to be able to see immediate results even when pings fail.
Example is below:
(Username and host name changed to protect the innocent; or due to being overly paranoid, whichever).
Failed -
View 6 Replies
ADVERTISEMENT
Jul 16, 2010
Ii successfully installed RHEL 5 on my HP pavilion tx200 (tablet) I reboot the system and the booting was successful but failed to display the interface that will allow me to supply my user account, I installed it using custom layout and default layout but the result was the same.
View 2 Replies
View Related
Aug 16, 2010
I have just installed a testing net install of squeeze on my laptop and I'm having a few problems with my wired connection.
When i try to ping google.co.uk there is a large delay between each result even through the actual ping takes ~30ms. It takes about 5 seconds or more between each ping.
If i use ping -n it works fine. Does anyone know why this is happening?
View 3 Replies
View Related
Aug 2, 2010
Due to my problem getting F13 installed on my main desktop PC I thought I'd give the live CD a go in an old laptop:
Toshiba Satellite 1400-103, 512 MB RAM
This time I at least got to the desktop, however firefox will not connect to any website (and I've tried dozens)
However if i open up a terminal I can ping the websites that were not connecting, e.g.
Code:
So it does not appear to be a DNS problem (and other win boxes on my router connect fine)
Is it even worth proceeding with the F13 install at this stage?
View 4 Replies
View Related
Jul 8, 2009
I installed the new debian_lenny_5.0.1_amd64 x64, i am having a nVidia Geforce 8500 GT 512 RAM display card. I was trying to install the driver using the synaptic package manager. I installed them, but i was not able to use the driver. I don't know where the drivers are installed and how to use it. I checked the xorg.conf , and the nVidia driver is not listed there. how to install them .
View 9 Replies
View Related
Feb 3, 2010
I have tried several times--unscuccessfully-- to upgrade to the testing branch. I change my apt sources to "squeeze". I get either "err" or "ign" on a lot of the sources when updating. I have seen several methods as to how to upgrade from stable to testing and none have worked so far. I have tried "apt-get update && apt-get dist-upgrade" as well as using aptitude to do the same similar commands. What I find is the following:
* My kernel never gets upgraded at all.
* udev is broken and mice and keyboard do not work.
* Many packages are held back and not upgraded.
I do have a debian 5 image to re-install and try again but I am not finding it to be as easy as many debian people claim. Also, I did a fresh install of squeeze using the net-install image. When the install finished and I rebooted, the computer hung on boot up. It never seemed to read where the kernel was. It would boot up, the system would beep and then reboot never finding the kernel or boot block apparently. how to get squeeze on my box? It is a 1.2 Ghz computer with 512mb ram with the intel i810 southbridge chipset I believe.
View 14 Replies
View Related
Apr 21, 2010
i tried installing the drbd for replication of data.. i found some tutorials but when i tried installing it i spits out an error of
Code:
E: Package drbd8-module-source has no installation candidate this is what i use to install it
Code:
apt-get install drbd8-utils drbd8-module-source drbd8-source build-essential
View 9 Replies
View Related
Jan 20, 2011
I have a Slackware 13.0 server that is not replying to icmp pings. However, I have double checked that /proc/sys/net/ipv4/icmp_echo_ignore_all is set to 0. The weird thing is I can run nc -v slackware 22 from any computer on my lan and the banner comes up just fine. The nic is on the same netmask and broadcast as all the other computers on my lan. I can log into it as well, it just doesn't respond to pings. I can even ping other computers and get replies just fine when pinging from inside the Slackware server.
I have even added an iptables INPUT rule for -p icmp -j ACCEPT. Although I've never had to do this. I ran tcpdump -vv icmp and I can see ping requests coming into the computer, however slackware simply doesn't respond. What could be causing this? A corrupt arp cache? It's been happening for more than a few hours so I wouldn't think so. How can I view the arp cache table? How do I clear it?
View 5 Replies
View Related
Apr 19, 2010
I just upgraded my computer from Ubuntu 9.10 to 10.04 (beta2) restarted and the splash was screwed i thought meh i can live with it then went into my account switched to tty1(ctrl+alt+F1) and it was the same. got annoyed now asking had anyone else encountered/know how to fix this problem. pictures attached sorry for bad quality took on phone, but that is how it really looks.
View 9 Replies
View Related
Dec 12, 2010
I had debian lenny running smoothly for a while, then I think the power went out and the computer didn't shutdown smoothly. The next time I started it up I ran into this error: Checking root file system.../etc/rcS.d/S10checkroot.sh: line 274: /sbin/logsave: Permission deniedfailed (code 126)This happens in single user mode as well. I've tried fscking all my partitions but it doesn't help. I've booted in bypassing the normal init and changed the permissions of /sbin/logsave to 777 and during boot I get a message of: The file system check corrected errors on the root partition but requested that the system be restarted. failed!Then the system just reboots automatically without letting me to anything.
View 7 Replies
View Related
Jun 28, 2010
I just wanted to count how many backups are successful/failed based on the file. My file look like following..Quote:
# Directory Backup was successful on server1
# Directory Backup was successful on server2
# Directory Backup was failed on server3
[code]....
View 4 Replies
View Related
Mar 22, 2009
I've got a box running Etch which seems to have a bad memory controller (I get segmentation faults left, right and centre) so I've built a new 'puter with twice the CPU power (2.4Ghz Intel Q6600 vs Athlon 1000+) and four times the RAM (2Gig vs 512M). I downloaded Lenny three days ago and, apart from some screen resolution issues which I've been discussing in the Newbie forum, most things have been working just fine.
However, I downloaded Opera yesterday (opera_9.64.2480.gcc4.qt3_i386.deb - same version I've been using on the Etch box) and I've seen some strange behaviour. A lot of sites, this one for example, work as expected, but if I go to, for example, www.bbc.co.uk or www.guardian.co.uk, the hyperlinks don't work, the cursor doesn't change to a hand when I hover over the links and clicking over the links doesn't do anything. The same pages work normally using Opera on my Etch box so it seems to be an issue with Lenny, or maybe Gnome on Lenny (I have KDE on the Etch box).
View 3 Replies
View Related
Feb 27, 2010
In reply to my last question about Wireless incompatibility in Debian 5.0.3 'Lenny', I found out it was because of missing drivers that I chose to ignore, despite the notifications.Now I've got this problem again, this time with different hardware and a different distribution of Debian (Debian Testing 'Squeeze' i386). As well as asking me to load up ipw2100-1.3.fw (of which I already have), it asks me to load tigon/tg3_tso5.bin. Loading the firmware is no problem. Finding and downloading nthe firmware is the problem here.I've searched through packacges and bug reports for a dowload link, but I've only come across a bundle with the driver I need, as well as a few unneeded extras. IT doesn't work at all.
View 1 Replies
View Related
Feb 17, 2010
Primary symptom: /proc/self/fd is there and normally populated, however /dev/fd is not. Process substitution therefore fails, because bash wants to create files under /dev/fd./dev/.static/ and /dev/.udev are populated. aptitude udev shows that the Debian package is installed, even though udev cannot be supported on this Xen vps (and, I believe, isn't supported by default until later stable versions of the Linux kernel).
I can solve the immediate problem by symlinking from proc/self/fd to /dev/fd, and putting the appropriate script in init.d. But are there any risks arising from Debian being misinformed about what my vps can do? And if so, what should I do about it?
View 1 Replies
View Related
Feb 22, 2010
I'm installing a file server on Lenny (Samba on RAID5, nothing exotic)
First, I installed on a basic SATA drive, to check everything else in the system was recognized correctly. Success.
Then, I added my 3405 Adaptec board, with a 3 drive RAID5, and reinstalled, still on the lone SATA disk.
Install runs ok, shows correctly the 3405 board, detects the logical drive alongside with the SATA drive. Smooth. I install Lenny on the SATA drive, planning to use the RAID5 for later partitioning and data storage. During install, the SATA disk is shown as SCSI-1 and the RAID5 disk as SCSI-2. Again, install completes correctly.
But on reboot and after selecting the default config, the system complains it can't find /dev/sda1!
If I remove the 3405 board, Lenny boots fine.
Is the presence of the Adaptec board and RAID5 drive changing the numbering of the disks, so that the SATA disk is no longer seen as /dev/sda1 ?
View 2 Replies
View Related
Jan 19, 2010
For about the past month I have been having a very frustrating problem When I boot the system with the ethernet cable attached it acts as if the cable is unplugged even though the connection light is litWhen I boot the system with the ethernet cable disconnected and wait until it boots all the way to gnome and then plug in the cable everything works fine
View 1 Replies
View Related
Jan 8, 2010
My computer have Windows XP installed and now I want to install suse 9.0. I insert the boot disk (disk 1) and reboot my machine.Then on the boot option window, I select 'installation'. Then comes the error: cannot find SUSE installation CD. Activating Manual.... Then 'English'-->'English(US)'-->'Installation'. Then comes another error: Cannot mount CD-ROM.
View 2 Replies
View Related
Feb 3, 2016
I'm unable to get the "Uncomplicated Firewall" (UFW) to deny incoming pings. I've set it to deny incoming. Yet when I ping it, it responds.I'm using Debian 8.2 jessie KDE fresh/clean install with all updates.Below is the terminal output from a simple test (I've added an extra line feed between the commands for clarity):On a Debian 8.2 computer -- I install UFW, enable it, check its status (deny incoming), and get the Ethernet address:
Code: Select allroot@Computer:/home/user# apt-get install ufw
.... (long output -- no errors or warnings)
root@Computer:/home/user# ufw enable
Firewall is active and enabled on system startup
[code]...
The Debian computer with UFW active is responding to the pings, when it should be ignoring them.Rebooting the Debian computer doesn't fix the problem.This setup is very simple. I'm using all UFW defaults.This is a new Debian 8.2 install (clean) with all updates.
View 3 Replies
View Related
Jun 8, 2015
Had this strange issue ....
Steps
a. Working Gnome desktop with NVidia proprietary drivers in Jessie.
b. Something happened (see below)
c. Still working Gnome desktop with NVidia proprietary drivers in Jessie.
d. Reboot
e. Boot up in low res -can see the terminal messages but no X/ Gnome Desktop
f. CtrlAlt-F1 takes to terminal login
g. Log in, looked at dmesg, syslog shows no errors but looking at Xorg.[0-5].log shows:
Code: Select all[ 7.942] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 7.943] (II) NVIDIA(0): NVIDIA GPU GeForce GT 240 (GT215) at PCI:1:0:0 (GPU-0)
[ 7.943] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 7.943] (--) NVIDIA(0): VideoBIOS: 70.15.27.00.00
[ 7.943] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 7.945] (--) NVIDIA(0): Valid display device(s) on GeForce GT 240 at PCI:1:0:0
[Code] ...
After looking at this post [URL] .... poked around at the back of the monitor and found the DVI cable loose. Plugged it in tight and rebooted and Gnome desktop came up as good as ever.
Step b. , as it turns out, was someone had adjusted the monitor height resulting in the DVI cable coming loose but not getting pulled out entirely.
View 0 Replies
View Related
Dec 20, 2009
I tried moving firestarter boot script around, calling firestarter in /etc/rc.local and in gnome-sessions (start programs) and so forth. Alas, only way to get it started is from root terminal with # firestarter --start-hidden & i use wicd, wlan0 and a router. Network monitor and iptables are installed.
View 1 Replies
View Related
Dec 30, 2010
I am running dnsmasq in debian lenny, wvdial connecting but dnsmasq doesn't work, the /var/run/dnsmasq/resolv.conf file is empty this is /var/log/syslog:
The /etc/resolv.conf and /etc/resolvconf/run/resolv.conf is ok:
This is my /etc/dnsmasq.conf:
[url]
View 3 Replies
View Related
Aug 2, 2010
I've successfully installed Debian testing (squeeze) on my old iMac G3. I didn't select a desktop environment as a preconfigured package, but only left "standard system utilities" checked.Once I rebooted, I logged in as root (on the command line) and ran "apt-get install xfce4 xfce4-goodies gnome-icon-theme xdm", let all that pull in and installd then rebooted. As the system was booting, I could see all the services starting and whatnot, but when it gets to the line "Starting xdm..." the screen changes to black, but stays black for a good 2 minutes. I tried hitting some keys on the keyboard, as well as typingy login credentials, even though I can't see them, but nothing seems to work. I've tried rebooting several times
View 6 Replies
View Related
Dec 14, 2009
i was trying to use gnome and kde but i don't like them. I tried xfce and it seem to fit my needs but.My computer is used to be powered on for a weeks. While time passes, a process xfdesktop begin to use more and more memory and to free RAM i need to log out and log in again.
I tried squeeze yesterday on my virtual machine and it has 4.6 and seem not to have that bug, RAM usage is static(yes it still works when i write this and have memory usage 34492k, which is not changing for an hours of usage already), also 4.6 is MUCH better than 4.4.
i already tried adding squeeze to "sources.list" but i can see too many dependencies which should be upgraded if i install 4.6, i'm beginning to afraid it can crash entire GUI(or entire system, i can see there is libc6 required to be updated).
View 14 Replies
View Related
Sep 7, 2015
After a recent Debian 8 update, I notice a new problem with the Gnome-Terminal. When you open a new tab or window, whatever is the cwd of the current tab becomes the cwd of the new tab or window. This always used to reset to ~, which is what I want. Is this a new "feature" and if I can disable it?
View 3 Replies
View Related
Aug 27, 2015
Built a machine w/ i5-4440 & gtx 960. I installed xserver-xorg-video-intel & xserver-xorg-video-nouveau. Xorg -configure fails, so I added xorg.conf I found online, makes no difference. xrandr can't open display. startx of course fails.
Backstory: My plan was to dual boot sid + stable as fallback with shared partition. First installed stable and whether connected to mobo or gfx card, I couldn't get login on tty, it would just hang on errors. So I installed sid (this time using lvm to hopefully make partitioning easier) and while I get the "failed to load nouveau" errors on mobo, gfx card gives me a login screen.
uname -a
Code: Select allLinux 4.1.0-2-amd64 #1 SMP Debian 4.1.6-1 (2015-08-23) x86_64 GNU/Linux
lspci | grep VGA
Code: Select all00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)
[Code] .....
View 1 Replies
View Related
Mar 5, 2011
Is there a terminal emulator which works well in an Ubuntu desktop and provides the following features which Mac OS X's Terminal application has? Re-wrapping text when the window is resized.A Clear command which clears scrollback (as the shell clear does not) and does not clear the cursor's line (typically containing a prompt).
View 2 Replies
View Related
Jun 9, 2011
I upgraded one of my Squeeze installations to Wheezy, but after selecting it in grub, nothing is displayed on screen: no CLI and no GUI. I tried Ctrl + Alt + F[1-7] and I got nothing. My laptop is Acer Aspire 7715Z. I am attributing this to module as there seems to be disk activity, but without a screen, I cannot be certain.
View 14 Replies
View Related
Nov 24, 2014
My card Wifi network doesn't turn on, even at loading configuration of the system is failed. I have to wait a long time until the system itself to load.
And when I write ifconfig or iwconfig is displayed in the console interface wireless card.
And when I come in the panel on the network card, it immediately pops up a window that you can not load the network card modules.
I don't know what could have happened, I do not recall that I recently messed with the system.
Here are the pictures: [URL]....
And here I join dmesg.log file, at the end of a failed: [URL] ....
I have linux mint 17 quiana cinnamon
View 4 Replies
View Related
Feb 2, 2010
I'm running Debian Sid amd64 on a Vostro 1320. Both hibernate and suspend works fine using the kernel hooks, but after the system resumes from hibernation, it starts to get really sluggish. Iceweasel hits 100% CPU use, and I have to close it and open it again to get it working, and generally the system is just must slower than before the hibernation. I have to reboot to get performance back, and even doing swapoff and swapon does not solve the problem.
View 4 Replies
View Related
Feb 14, 2011
I tried four cdrs and I can't get my dvd rom or dvd-rw to list the contents even though k3b says it was successful. If I open k3b it see the cdr and say sessions 1 appendable yes. I burned the cdr as multisession. I can only view the contents of the cdr by doing a continue multisession while in k3b. I'm using squeeze and kde.
View 4 Replies
View Related
