Is there a RDP client that supports version 7? I've been using rdesktop, but as far as I can tell it only supports version 6. The main reason is that version 6 doesn't support the Windows 7 Aero theme.
View 2 RepliesI love Ubuntu but there is just one thing that I cannot get working. I have vista on this computer (Which I am going to delete after I get this working) when this computer is booted into vista then I type "192.168.1.65" (which is this computers internal ip address) and it connects to it without a problem. When I try this on ubuntu with KRFB running I type "192.168.1.65:5900" as it tells me to do with the added port number. This computer (This is the one I am Connecting to says "The remote user has been authenticated and is now connected." and when I hover over the icon it says "Desktop sharing - Connected with 192.168.1.70" which is my laptops IP address. On my laptop however it says "Remote Desktop Disconnected Because of a protocol error detected at the client (code 0x1104), this session will be disconnected. Please try connecting to the remote computer again." No matter how many times I try it doesn't work.
View 6 Replies View Relatedis it possible in the standard remote desktop viewer in Fedora 14 to use RDP instead of VNC protocol? I know that Ubuntu provides this feature. I already installed tsclient and rdesktop but that didn't help.Before you say I have to use VNC: I know... I am just curious how I can set up RDP to connect to Windows based machines.
View 2 Replies View RelatedIs there a good terminal services client available I can connect to my Windows boxes from Fedora12? I am willing to pay for a commercial license if there is a good one
View 7 Replies View RelatedSuggest me a remote desktop client i am using remmina but i cant get desktop for my solaris 10 ,i am using fedora 13.
View 9 Replies View RelatedI have a mate who runs the IT in his office. He has recently set up and secured the network but now has an issue logging in to the network from home. Here is the message I got from him regarding the set up and what he is having specific issues with.
I was really pleased with the results on my Pen Test; the office itself is a pure MS environment but the testers all use Ubuntu 9.10 to hack with. The main tools of choice are Nessus and Ophcrack with a bit of NMap. It's pretty scary what you can do with just these tools. I had a Wireshark trace running all the time and it's fascinating to watch how these guys crack open a system. The only really major change I've had to implement on my network is to force the use of SSL as a transport layer for our remote desktop sessions. This has forced me to start using MS RDP Client 5.2 because it can use certificates on the session. The problem I've got now is that the Terminal Client in Ubuntu can't do this so I can't remote in from home on my Ubuntu laptop.
I'm trying to connect to a Win XP computer via Remote Desktop/Terminal Server. (Note: WinXP refers to Remote Desktop, or RDP; Ubuntu uses Terminal Server client for this function.)
The problem is that my XP computer requires the use of Microsoft's RDP version 6 because it uses a Terminal Server Gateway. The TS client in Ubuntu is compatible with version 5, not version 6.
Is there a MS RDP version 6 compatible program/client for Linux?
Does anyone know if hp thin client linux version supports desktop icons?
View 3 Replies View RelatedWhen either of the proprietary Nvidia drivers are enabled, viewing the desktop using a remote client (Windows TightVNC) does not work. The initial remote screen display is ok, but no updates to the remote display occur. Reverting back to the non-proprietary driver solves the problem. I have also tried using a 10.04 Live CD and used Remote Desktop Viewer on the client machine, and it behaves the same way.
View 2 Replies View RelatedI am at a loss. I can not access my work remote desktop via the terminal server client on my wired box running Ubuntu 10.10. My wireless laptop is able to connect right away once I established the VPN connection. The VPN connection is established on both boxes with no problems.
When I tried the Terminal Server Client on my wired boxed, it says it can not establish a connection. Yet my wireless box gets connected immediately!
I check the /etc/dhcp3/dhclient.conf and the /etc/resolv.conf to see if there were any differences, but they are essentially the same. When I have the vpnc connection, they both recognize it and I am able to ping the IP address shown when I do a "ifconfig" on the terminal.
What can be the problem? Anything I need to configure on a wired computer versus a wireless one? What else can I check?
The Remote Procedure Call (RPC) protocol uses only TCP, or is it possible to use RPC over UDP?
View 1 Replies View Relatedonce again banging the head against a brick wall, entered the following commands in to client and server, but get the above message on both, is there something wrong with the script, or thw computers? mount 192.168.1.68:/export/shared /mnt/nfs_on_debian
View 1 Replies View Relatedi am facing a problem with my mail server,i get an error when sending mail to a specific domain group;
Aug 18 06:41:02 mycompany2 sendmail[16745]: n7I1Ab9m016743: mail.xyz.in.: SMTP DATA-2 protocol error: 571 Delivery not authorized, message refused
Aug 18 06:41:02 mycompany2 sendmail[16745]: n7I1Ab9m016743: to=<feedback@xyz.in>, delay=00:00:25, xdelay=00:00:24, mailer=esmtp, pri=166397, relay=mail.xyz.in. [xxx.xxx.xxx.xxx], dsn=5.5.0, stat=Remote protocol error
I maintain plain vanilla Ubuntu 10.04 systems for several friends. Each machine has only one user, the owner. I use Remote Desktop to instruct and to perform maintenance. Here's my problem:After updating the system, if the kernel has changed, a restart is needed. If I do a restart, I then have to phone the owner to insert his login credentials in the gdm login screen, before I can do anything else via Remote Desktop on that machine.There ought to be a simple way I can avoid the phone call and login myself.
I'd strongly prefer not to use any software that is not included in a plain vanilla Ubuntu 10.04 installation. And I don't want to weaken system security beyond what it is now.Is there a solution? Or, what is the simplest solution?
i would like to replace my Ubuntu Desktop version with the Netbook version. I dont mind losing my current data on the desktop version but if there is a way for me not too i would love to know
View 2 Replies View RelatedI have installed Ubuntu 10.10 desktop version on my Lenovo L420 laptop. Now my friend told me that if I had installed laptop version on it then it would have recognized events related to laptop like closing down the laptop screen and all.
Q1. Is there any way by which I can upgrade it to laptop version?
Q2. What are the differences between both?
I am trying to set up autofs in RHEL 5 and every time I run the "automount" command, I receive this message: "automount: test mount forbidden or incorrect kernel protocol version, kernel protocol version 5.00 or above required."
View 1 Replies View RelatedJust got my AW M11x and I am following a thread on installation issues and work around. My question is should I install the desktop version or the Netbook version? Not sure the best location to post, if incorrect please move accordingly Wanting to run gimp, open office, wine to access MS office (use for school) and possibly install photoshop for raw work gimp cant handle.
View 5 Replies View RelatedI'm working on getting my myth box hooked up to my Sony flat panel display.Originally the nvidia drivers could not read the EID, so defaulted to only 640x480 over my HDMI-DVI connection.I manually updated xorg.conf with a mode for the resolution I know the thing can handle. Suddenly there are several resolutions avaialble in nvidia-settings and it seems to be communicating with the TV, as it is now listed as a Sony FP display rather than a CRT.I'm able to change the resolution now as expected.my problem, however, lies with the TV itself. I can't seem to get it to actually display the output. I'm able to remote desktop into the box and can see Gnome logged in and everything.However nothing on the TV itself.How do I troubleshoot this? Am I missing something obvious?
View 6 Replies View RelatedI have my main box, Ubuntu 10.04lts, and I am trying to use remote desktop viewer to see the desktop on a Windows XP machine. The machines are side by side The Ubuntu box is hardwired to my network router, and the XP machine is connected via wireless. Both get to the internet fine, and I can ping the Ubuntu box from the XP box. But, I cannot ping the XP box from the Ubuntu box, and Remote Desktop Viewer won't establish a connection to the VNC server I have running on the XP box.
View 6 Replies View RelatedIs there a way to have drag and drop access between Linux and a Windows remote desktop connection?
View 1 Replies View Relatedxrdp
gnome
ubuntu 9.10
I have xrdp installed running on the PC. how to allow remote Linux PC to connect Ubuntu 9.10?
Do I need to install;
libcurl4-openssl-dev
libpam0g-dev
vnc4server
I am using 2 PCs, both running ubuntu. I want to connect via remote desktop (vnc, ssh -X, etc) form one to the other. However, what the solutions I found until now offer me, is the possibility to create a new desktop session and view that one (or run an application an view that one). I have an application running on the server, and I want to see that application, without needing to restart it or running it again in a new desktop. Is this possible?
View 1 Replies View RelatedI am trying to setup my HTPC. I wanted to have the most minimal overhead possible so I installed Ubuntu 10.10 server from the mini.iso and just added the ssh option. I then used the following command to give me a desktop environment because I will want to run firefox and it apparently requires this to run.
Here is the command that I ran:apt-get install xorg gnome-core gdm gnome-applets gnome-system-tools gnome-utils ubuntu-artwork compiz-gnome firefox sysv-rc-conf.The desktop works fine and I can open fire fox, however, the remote desktop is missing from the preferences menu.How can I install this? I would like to add the remote desktop option from a command line.
I have set up a server running ubuntu desktop, and I'm able to logon through remote desktop (win 7). The problem is that if I logon from computer 1 and open some programs, I don't see these programs when I logon from computer 2.I logon with the same user, so I find this strange. Is there some setting I have missed to be able to see the same from any computer (logon through remote desktop).
View 5 Replies View RelatedI have VMware server installed on this machine. I also have a Windows XP VM running all the time. I have it bridged so it gets a valid IP from my router and such and is in my network. I use KRDC to remote desktop to it and I make it full screen. However if I want to go back to my desktop I have to minimize KRDC.
Is there a RPD client out there I can use so I can go full screen on 1 desktop and have everything else on another desktop then use KDE's Desktop switcher or ctrl+alt+arrow keys to switch between desktops to flip between Windows XP and Linux without having to minimize?
i have a udp server running at port 60178. when i connect to it from localhost there is no problem. when i use the client from a remote host i am not able to connect. I changed my server firewall settings[Fedora 11] and added "udp 60178" to trusted ports but still nothing happened. I ran wireshark and observed that packets are coming to the server machine but server returns a "Port Unreachable" ICMP message and doesnt give the packet to the application.
View 3 Replies View RelatedNo sure exactly what the problem is here? I am trying to get a X app running from a remote site on my desktop. I am using this proceedure:xhost +remote host xauth on local host the get 'Cookie'.
scp Cookie to remote host
xauth merge Cookie into .Xauthority
ssh to remote.
export DISPLAY=local host:0
xfig
xfig fails with "Error: Can't open display: local:0"
If I start another X using '-ac' ( not authinaction) and put to local:1 , all is well.
I am using VNC to login to remote machine (vncserver). My question is; How can I login to remote machine (vncserver) through VNC client, without having to login to vncserver first physical. For better explanation here is an example: If john wnat to login to vncserver remotely first he has to login the vncserver physically then he can login remotely.
View 5 Replies View RelatedI am looking for a client/server application that can allow me to have remote GUI access (eg: VNC) but with the ability to use sound.
I see that TeamViewer has a linux application out now but for my company, it would compromise security protocol because it reaches out to the TeamViewer servers to do any work.
Basically, we have applications that require a GUI and we need to hear sounds from them if they throw an alert (the app is a monitoring tool).
We are running a VNC server on it currently and when our monitoring machine was on Windows, TightVNC was able to get the sound...that is not the case with any Linux client so I am wondering if there is actually one that exists.