Is there a linux program I can use to extract audio, tweak it and then re-insert it into the video portion? I guess there will have to be a way to also sync the audio and video.
View 2 RepliesI have a mp3 file and would like to convert for video, the jpg will be the image of the video.
View 6 Replies View RelatedI have a video file in which the audio runs faster than the video, so they quickly go out of sync. The way to fix it would be to separate the audio and video streams, speed up the video (the audio is FINE, it's the video that's wrong), and then recombining them. What is the easiest way for doing that?
View 7 Replies View RelatedIs there an application that anyone knows about that I can use to convert either an .flv or .ogg file that contains both audio and video to just an audio .ogg file (preferably vorbis+theora) without audacity? I'm fairly certain audacity could accomplish this but it seems like overkill for what I'm trying to do and the computer I'm trying to use does not run it so well.
::EDIT:: I should also mention that I've tried looking on google. I did find downloadhelper extension for firefox which uses ffmpeg to convert the files but I don't see any obvious way to strip the video.
Setting up a linux based church server to be placed with a collocation host.
-- Server will be used for:
--- providing .pdf files
--- live streaming of church services (audio for now audio video soon)
--- providing audio files
--- providing audio-video files
--- our internet web site
A. Is there a preferred Linux distribution that will make this easier?
B. What is the best format for audio and video files that will be viewed variously on Linux, Mac, and Microsoft operating systems? Files will need to be played on older versions of operating systems and may need a free or very low cost software to play (e.g. play on Win2k)
C. What software is best for recording the audio or audio-video files? Some additional funding might be justified for this software, particularly if it can also support live streaming.
D. What software is best for live streaming both on the file creation and the listening-viewing sides of the process?
Ideally we would like to have a single software suite to live stream, and make downloadable audio or audio-video files for later download, and not require those listening and viewing to have to install additional software. Keeping file sizes small is also desirable because some of our users will probably only have dial-up internet.
To get multimedia working, or explain what I'm doing wrong.
The problem is that none of the video players doesn't play video, they show only black window and play audio.
I have Fedora 11 Leonidas, fully up-to-date.
I have installed rpmfusion and livna repository.
I have installed following packages:
When I try to play video with totem, it doesn't output any error, but just doesn't play video.
with mplayer:
xine and kaffeine just say:
vlc:
I tried several different files, which works perfectly in windows and ubuntu.
I installed windows binary codecs for mplayer to /usr/lib/codec/
Preface: I have just bought two new WD20EARS hard drives and have added them into my LVM and moved all my data from my old failing seagate drives to my new drives. I also have a WD10EARS in the LVM.
These are WD Caviar Green Power 4K hard drives.
Using Ubuntu 10.10 64bit and LVM2, everything is working but I want to know if I can tweak it for more performance. I am relatively new.
Questions:
1. How can I check if the 4K drives are aligned?
2. How can I check what block size LVM is using?
3. I didn't partition one of the WD20EARS when adding it to a LV, will this be problematic or effect performance? Can I partition it without losing the data that is on it now?
4. I heard XFS is better than EXT4 for large files and people tend to suggest using certain formats when they're talking about LV's, if I check the format of any of the hard drives it says they are lvm2...?
i'm following the tips from Samba and Suse: HowTo Set up an openSUSE-Windows Home Office LAN/Network. Versions 10, 11 to set up samba and tweak it to my needs.
View 9 Replies View RelatedI followed this article How To Network openSUSE 11.4 And Windows to network wired (ethernet) windows xp and wireless opensuse 11.4 and everything is working great. i can see windows from opensuse and opensuse from windows but have a few questions.
First, when i got to the section to Open firefox or Konqueror and in the address bar type localhost:901 and press the Enter key in articles photo it shows i should have, home-globals-shares-printers-wizard-status-view but i only have home-status-view-password in my firefox when i typed localhost:901, is that all i should have?
is there a way to directly open the executable text files in ubuntu without that annoying msgbox asking us to display or run in terminal mode...
View 1 Replies View RelatedI have a script that runs my daily rsync, I would like to expand it to email the output, and on a fail, an alternate email address. Also I would like to have the seconds converted to HH:MM:SS if it's not a big deal. What I have so far is the extent of my abilities.
Code:
start=$SECONDS;
if rsync_output=$(rsync ...
then echo Success;
else echo Fail;
fi;
echo "$rsync_output"
echo time in seconds =$((SECONDS-start))
I'm wondering if there is anything I can do to get the best speeds possible. I pay for 16mb/s connection (with charter) and I was getting about 4mb/s. After upgrading firmware, and changing some encryption settings on my router, that went up to about 6mb/s. It's improvement, and I'm happy with that, but I'm looking for that 10 more mb/s
So, is there anything in Ubuntu to tweak to optimize connection speeds? Also, if it affects anything, I'm using a linksys WRT320N router. I was going to use the 5.0ghz band, but my wireless adapter is an 802.11gb, so I'm stuck with 2.4.
I've recently switched from Windows to Ubuntu and have a question regarding tweaking the character order Nautilus uses for alphabetical sorting. In my music/graphics/etc folder hierarchies, I have used a hyphen at the start as a 'hack' to 'sticky' some folders above the rest for quicker access. This worked fine in Windows, but Nautilus ignores a hyphen in it's sorting calculations. Is there anyway, simple or complex to replicate this behaviour in Nautilus?
View 4 Replies View RelatedI installed Natty Narwhal from a pendrive I set up, which was a bit of a messy install to begin with. However, after booting into Ubuntu, this application called "Install RELEASE" appears. When I run it, it shows up just like I'm installing Ubuntu again. After following it through, it will stop and say that it must unmount /. It offers two options, Go Back, or Continue. Picking either does nothing. This hasn't seemed too big an issue. I can still run it fine. However, the Software Centre is an issue. Whenever I try to download something from it, I get this error:
[Code]...
I'm looking for a program that will visualize anything that goes through my audio-output (in this case it's Spotify) and display it on the screen. Does this exist?
I'm running Ubuntu.
I recorded many useful lectures this year. They are now on my HDD an with their 196Kb/s mp3 compression they take almost 30Gigs of space.good GUI Ubuntu 10.4 program for ripping them to smallest size possible (I don't care about quality - they are voice recordings) 8 Kb/s would be nice. But all programs I have tested since offer me only higher qualities.
View 5 Replies View RelatedAny one knows a software like itunes where I could burn cds in fedora 11.
View 5 Replies View RelatedI like to listen to LastFM and a stream from ShoutCast. I would like to record some of these. Which linux program would do this for me...using OpenSuSE 11.0. Would Streamripper be the one? KRecord? Amarok?
View 1 Replies View RelatedI have a Dell Inspiron 1525, X-UB 8.04. Audio: I want to be able to turn the volume up or down, I cannot find any control that does this. Video brightness: this has 2 settings in BIOS, (a) on battery (b) on
AC power. From time to time something (I have no idea what) turns the (b) setting down from 8 to 2 and the screen becomes very murky. The only way I know to fix this is to shut down & restart & go into the BIOS & turn it back up. Is there a way to reset (b) without having to shut down & restart? Is there a way to discover what bit of S-ware is the culprit?
whenever i oped an audio program, it doesn't work. for example in ardour it says, "JACK is running as another user".I think this is the problem for most of them.I searched for JACK and found a folder and it says the user's name is root.
View 1 Replies View RelatedI recently installed Fedora 13 in my laptop, installed the audio codecs(mp3..and etc) and worked just like a dream. But every time I try to play a mpeg, avi, mov file in a player (vlc, xine, mplayer) I get no video, just a black screen. But I get the audio from the video.
View 9 Replies View Relatedim a little familiar with opensuse..but when i formatted my pc after the installation of opensuse i realized i missed all the audio and video codecs...now i cant even listen to mp3s let alone watching videos.i remember there was a forum post explaining how to install all the audio and video -well mostly- codecs..could you explain how i can install audio and video codecs?
View 3 Replies View Relatedafter installing opensuse 11.3 i am finding that i cannot recieve any audio with video with any application.
i can hear certain types of audio, it seems any audio that is not attached to video. i can hear the welcome chime through my speakers after i log in to opensuse and i can also listen to .mp3 files played with amarok. i can watch videos with multiple players, videos videos etc., but there is no audio happening with the video.
i am thinking now this may actually be a hardware problem, since it seems to persist with different software, and only with audio attached to video. i'm thinking maybe there is a problem with my graphics card and its driver (or a lackthereof), although i'm unsure of why i can still watch video. i don't receive any error messages or anything, nor have i attempted to manually install any drivers for my existing hardware. i tried cranking every volume control i could find, including the system volume, but still no volume with video (its weird, its like i can hear it a tiny bit when i crank it, perhaps this is just the internal system beep speaker trying to fill in for the gfx card?).
the card i'm currently using is an nvidia card and although its not exactly old, i have read about some problems with nvidia being reluctant to produce drivers for linux in the past. after some brief googling of nvidia and linux, i was surprised to see that nvidia has an entire portion of their site devoted to unix/linux and open source drivers (perhaps they're doing better now).
is there any way that i can troubleshoot this problem, or do you think the solution is simply purchasing another graphics card from a vendor that has a good reputation for linux support?
I installed ubuntu there is another problem iam getting is that i cant play any audio file or video file when i clicked on the file it is saying search for suitable codec when i click on search it is.
View 3 Replies View Relatedwhen i had windows xp i used to convert almost any videos video into audio (the whole video into audio) by going to [url], downloading vdownloader and just inserting the url in the box provided; waiting for a couple of minutes and having an mp3 format file at the location that i want it to be in the desktop. when i searched for something similar for linux, because vdownloader was an .exe file and obviously wasn't going to work on ubuntu.
i found that i could get a video downloaded from videos but not an audio - i wait for the video to finish buffering; click on places; computer; file system; tmp; then rename the video folder and copy/relocate it to where ever on the desktop. ending with this video format "flash video (video/x-flv)". my question is: is there a linux program where i get to convert the entire video format to an audio format, possibly mp3?
I have installed Linux mint 7 "Gloria". Every thing is working fine except the Audio. I am not receiving any video out put. I am using Dell Studio 1558.
View 2 Replies View RelatedI am trying to play some mp4 files that were captured on my samsung solstice phone. The videos play fine in gnome mplayer, but there's no sound. I am able to play .mov and .avi files with gnome mplayer with no problems.
View 8 Replies View RelatedHow to sync audio and video which is captured from a aeperate camera device and a microphone,how to relate timestamps to audio and video to syncing.I m capturinfg video at 30fps and audio 160 samples everytime so how these 2 should be related to sync and playback at a time
View 1 Replies View Relatedhas anybody tried out imo.im? This is a web based instant messaging service, it lets users chat on AIM, Google Talk, MSN, MySpace, Skype, and Yahoo. My problem is, that I can not chat video and audio with it under slackware. I have video camera, it works for example in Skype (with the propriatare software of Skype), but with imo.im not.
View 7 Replies View RelatedI have a number of uncompressed audio files recorded off of an analog (POTS) telephone line of fax transmissions. Is there a Linux utility or library I could use to convert these files into images of the fax they contain? I'm not looking to send/receive a fax via a modem, but just to "replay" the communications tones and parse out the fax message.I'm guessing this may not be possible due to duplex issues and not knowing which end of the conversation is sending what,but thought I'd ask to see if anyone knew of something.
View 4 Replies View Related