Software :: Netbook As A Dedicated Phone (with Wi-Fi Or Ethernet)

Jun 3, 2010

I really like to have my netbook be like a Cisco SPA502G, Cisco SPA525G, or any kind of business phone that's available. The current phone system I have is Asterisk.One of the advantage of having my netbook is that it has a battery and most desktop IP phones do not have one.

So, aren't there any Linux distros that act primarily as a "phone first; everything last?" (By "everything last," I meant anything like surfing the Internet, listen to music, etc." It's like having an advanced version of an SPA525G or a top-of-the-line Snom/Polycom business phone. I know this is way too much to ask about making my netbook act as a dedicated business phone, since I'll only be using one line per device. Like I mentioned, it's nice to be able to take my netbook with me whenever I go where there are wireless networks available, such as in college or a restaurant. Of course, I'll probably not expect to get a lot of features from Cisco SPA502G in a softphone. I can understand why anyone cannot imagine why I'd want to have so many features from SIP-based business phones, like intercom and G.722 codec ("high-definition voice," or "HD Voice"). Well, I'm a hobbyist; sometimes I like to put some of the features to use, like an intercom.

I used to try out Ekiga (supports G.722) and Twinkle (does not support G.722 as far as I've read), but I'd like to have something that integrates into the desktop environment--no, not the little icon that sits in a GNOME panel, but maybe a softphone that is docked to the right of the desktop with a resolution of 1024x600. This is something that is very useful to keep the softphone integrated into the panel while not overlapping with other non-softphone applications, such as Firefox or OpenOffice. Plus, the panel-based softphone can stay visible regardless of which application has focus, even if I maximize an application.

View 4 Replies


ADVERTISEMENT

Networking :: Tap The Phone Line To Run Ethernet Connection?

Jun 15, 2010

it is possible to tap off your phone lines with ethernet connectors. As an example. I take a phone jack in the bedroom, I splice off the line of the phone and insert an RJ45 connector along with the phone connector. Hopefully the line will be 4 wire. I can't imagine it would work with only 2 wire. I don't know for sure. Would that work?

My thoughts are the problems with the entire phone line connections. I know the phone line runs out of the house. Would it not work because of that when I attach a switch to it? If anyone has accomplished this or tried to, I would like to know. I'm guessing that the house would have to be pre-wired with CAT-5 because of collisions that can occur.

View 3 Replies View Related

Software :: Netbook Doesn't Recognize The Cell Phone - Driver For Samsumg SGH-D900

May 29, 2011

I have a Samsung SGH-D900 with its USB cable, and tried to connect to my Netbook - Ubuntu 10.04 to download photos, but the Netbook doesn't recognize the Cell Phone. Is there a Linux Driver for Samsung SGH-D900?

View 3 Replies View Related

Ubuntu Networking :: USB Tethering To Phone Doesn't Work Unless Phone Is Plugged In During Boot?

Jan 14, 2011

It's installed as a mobile broadband connection. Only works if my phone is plugged in during boot, otherwise plugging in my phone does nothing. For example, I booted my netbook earlier today but my phone wasn't plugged in. Tethering did not work, it just acts as if it isn't present. I rebooted (with my phone still attached) and now tethering magically works.

View 5 Replies View Related

OpenSUSE Hardware :: USB Connection To Phone \ Sometimes The Phone Craches And Needs To Be Rebooted?

May 16, 2010

I have a mobile phone (T68i) attached to my server and everything works fine. But sometimes the phone craches and needs to be rebooted wich is quite annoying.So I want to use a newer phone that is not 10+ years old :-)But when using a K610i or C702 the phone does not appear on /dev/ttyUSB0 as expected.When inserting the usb cable a dmesg gives this:

Code:
[5924924.451033] usb 1-3: new high speed USB device using ehci_hcd and address 19
[5924924.576728] usb 1-3: New USB device found, idVendor=0fce, idProduct=d0d9

[code]....

View 8 Replies View Related

Debian Multimedia :: Bluetooth Phone File Browser / Cant See Or Access To Any File Or Folder Into The Phone?

Mar 1, 2010

I have a dell precision m4300 laptop with a 360 wireless bluetooth dell adapter On my system there is a debian lenny with kde3 and backported enable(everythings is p to date except bluez-utils and bluetooth holded at version 3.36-3)

Nowadays bluetooth more less works fine, I can send and receive single file to/from my phone (nokia n70)

The hell begin when I try to browse my phone files from konqueror...with bluetooth:/ I can see the list of all the device near me with sdp://[address]/ i can see two icons (obex file transfer & obex object push)
but I cant see or access to any file or folder into the phone.

I also try to update my bluez-utils to 4.60-1~bpo50+1 but in this case kbluetooth totally fail and a see the contextual menu of the system tray icon all disaled.

View 1 Replies View Related

Ubuntu :: Installing 10.10 Netbook Remix Edition Onto A Acer Aspire One Netbook?

Jan 18, 2011

I am having trouble installing Ubuntu 10.10 netbook remix edition onto a Acer Aspire one netbook. I am attempting to install the OS from a 16GB PNY usb drive w/ the usb-universal installer and ubuntu 10.10 netbook remix .ISO

The reoccurring problem that I am encountering is that when I boot from the USB-drive and begin to install everything seems to be working, and then it is stuck at the menu where it asks who are you?; and of course i have filled in everything asked and at the bottom where you can look at what its doing in the terminal/detail section all it says is ready when you are, and the forward tap is unselectable.

View 1 Replies View Related

General :: Using A Netbook Nb305 Toshiba With A Intel Atom Processor With Netbook Os?

Oct 28, 2010

my play on linux wont work i go to download a game and it just freezes then it asks me to force quit or wait is because of the computer im using a netbook nb305 toshiba with a intel atom processor with ubuntu netbook os?

View 14 Replies View Related

General :: Resolution Overclocking Using Ubuntu Netbook Remix 10.04 On An Asus Eee 4G Netbook

Aug 30, 2010

Why i cant change from 800x480 to 1024x600, that this model of EEE pc doesnt support anything higher than 800x480 at the 10:1 ratio...

Firstly my question is, is it ACTUALLY possible to 'overclock' this type of netbook to run a higher res?

Im running ubtuntu netbook remix 10.04 and am new to linux (again, so sorry) so be nice, and ive tried getting my head around this 'sudo' stuff, and the xorg.conf file (which is nowhere to be found) and ive even tried a program calld astray but im pretty sure ive exhausted my patience as trying to self-teach . . .

And ive also tried to much around with xrandr or whatever that command was.. but i cant really get my head around it, and it kept telling me the resolution didnt exist ect...

View 1 Replies View Related

Ubuntu :: Can't Remove Plams-netbook From Kubuntu Netbook Remix 9.10?

Mar 7, 2010

For the past 2hrs I have been struggling to make KDE launch plasma-dekstop instead of plasma-netbook, but all in vain.I removed, then purged plasma-netbook and plasma-netbook-default-settings packages but after logging out and re-logging in the Netbook UI was back! After restarting the system now I can't even seem to get the KDM. I am greeted with a black screen.--- I restarted the system again and the nasty little bugger is back again! This is so frustrating. How do I get plasma-desktop to load instead?---- Great now I can see that plasma-desktop and plasma-netbook both are running simultaneously! netbook on top of desktop. So my final Q is how do I stop plasma-netbook from loading?

View 9 Replies View Related

Ubuntu Installation :: Switching From Kubuntu Netbook To Netbook Remix?

Mar 20, 2010

i would like to change my OS to Ubuntu netbook remix, but I already have installed Kubuntu netbook package.

Is there any easy way to make switch from Kubuntu to Ubuntu? Without need to delete all my data?

View 1 Replies View Related

Ubuntu :: Share Internet From 1st Ethernet AND To 2nd Ethernet And Wifi Card?

Feb 8, 2011

I am basically wanting to use my Ubuntu 10.10 computer as a router. Note: Before you say just get a router please note that I am poor/cheap. I have two ethernet connections and one wireless connection on my netbook. I want to share the internet connection that is going into one of the ethernet cards through the other ethernet card and the wireless card.

DSL-->1sr Eth --> 2nd Eth (currently works)
DSL-->1sr Eth --> Wireless Card (Adhoc) <--(connects with limited connectivity AKA no internet)

The 2nd Ethernet card already has working internet, but when I connect to the Wireless card (through an Adhoc network), it cannot get an IP (I believe).

View 2 Replies View Related

Ubuntu Networking :: User Interface Changed And It Defaulted To Ethernet And Now It Won't Letting To Go Back On Wireless - Disable Ethernet?

Sep 1, 2011

My laptop was working fine on wireless till the userinterface changed and it defaulted to ethernet and now it won't let me go back on wireless How do i disable ethernet?

View 4 Replies View Related

Ubuntu Installation :: ASUS Netbook Heating Up When Using Netbook 10.04

Apr 30, 2010

I installed Ubuntu Netbook 10.04 and immediately noticed the keyboard of my eeepc 1000HE was abnormally warm. Since I dual boot XP I booted to XP and found the fan running faster to compensate for the previous heat. This did not happen on Ubuntu-the fan just was barely running. I had to place the side of the netbook in order to feel the fan running. I issued "sensors" in terminal and it showed 67 degrees C for the cpu temp. Is the latest Ubuntu such a resource hug that it heats up the CPU?

View 9 Replies View Related

Fedora :: KVM Dedicated Network Adapter

Nov 27, 2010

The Fedora 13 Visualization guide mentions the ability to use "shared physical device" to give virtual guest full access to a network device. Where can I find more info on setting this up. When installing my first guest, the drop down menu didn't supply this as an option. Eth0 and Eth1 were not selectable (e.g. grayed out).Is there a better section to ask KVM related question? If so, I'll move there.

I'm setting up my first KVM guest now, played aroudn with VMware briefly. I did spend a lot of time wtih VM on mainframes (yes, I'm old)... and from my research, KVM is "catching up" with what we could do in the old days.

View 4 Replies View Related

Ubuntu :: Moving To Dedicated Partition?

Jun 17, 2010

right now i m using ubuntu 10.04 installed on virtual hard disk (wubi), but now i want to move it to dedicated hard drive partition. i found is to use LVPM however that software is NOT compatible with ubuntu 10.04. . .

View 3 Replies View Related

Networking :: Send Mail Via Different Dedicated IPs From Same Box?

Jun 9, 2010

I have software with a newsletter system - but because I have 16 clients per server they are currently all sending emails from the same (eth0) IP address DESPITE having a DEDICATED ip address per client account for their WEB address. If one spams (or gets spam complaints) then they all suffer - and I'd love to send their email via their unique IP address to stop this problem and to make the IP match their domain which has to be better at getting through spam filters anyway I'd have thought...

View 6 Replies View Related

Server :: VPN Setup - Dedicated Or VPS / Bandwidth?

Jul 10, 2011

I want to rent a (root) linux server to run a vpn service on it. I want to allow people to use this vpn.

My questions are as follows:
- What kind of server/service should I rent - dedicated or vps?
- Is one IP-Address enough to connect, say, 100 user? (I plan to run IPsec or OpenVPN, maybe PPTP)
- What Bandwith and/or traffic limits I need to consider to make the service reasonably fast for the users?
- Which Linux-distro should I use? Ubuntu Server, CentOS, FreeBSD, Debian etc?
- How much RAM and HDD space is recommended for such an endevour?
- Any advice on the processor type the server should have?
- Is 100M network ok or better 1000M?
- What means 100Mbps shared bandwidth in contrast to 10Mbps dedicated guaranteed per server?

View 4 Replies View Related

CentOS 5 :: Dedicated VNC Server Does Not Work?

May 18, 2010

I am trying to connect to my VNC Server from a Windows 7 Box running TightVNC:I've followed all the instructions on this page:[URL]And I changed my xstartup scripts:

/etc/sysconfig/vncservers
# The VNCSERVERS variable is a list of display:user pairs.
#

[code]....

View 12 Replies View Related

Ubuntu :: 10.10 64-bit Shows 3.7GB Out Of 4GB RAM On Laptop With Dedicated Graphics?

Nov 10, 2010

I'm accustomed to Ubuntu showing 3.9GB out of 4GB on my desktop. That's completely ordinary and expected: The kernel uses a dozen megs or so, which are not accounted for in the reported memory totals. After truncating, that brings us to 3.9GB.

I was expecting to see the same thing on my Elitebook 8740w, but System Monitor is reporting only 3.7GB instead, using the same version of Ubuntu. free -m shows:

total used free shared buffers cached
Mem: 3819 935 2883 0 80 287
-/+ buffers/cache: 567 3252
Swap: 4095 0 4095

That is to say, the total of 3819MB is not missing a mere dozen or so MB but a full 267MB from 4096MB! That's WAY too much to be accounted for by the kernel, so something else is going on!

Please note the following:BIOS shows the full 4GB, and so does lshw.

uname -a = Linux COMPNAME 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16 20:45:36 UTC 2010 x86_64 GNU/Linux
lspci | grep VGA = 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway XT [Mobility Radeon HD 5800 Series]

That is to say, I really do have 4GB RAM, my mobo and BIOS recognize it, I really am running a 64-bit OS, and I really shouldn't have any kind of onboard graphics.

The devil lies in the details though: I SHOULDN'T have any kind of onboard graphics...but the best explanation I can come up with is that 256MB or so are being set aside for that purpose anyway. This is a mobile workstation with dedicated Firepro graphics (based on the Mobility Radeon HD 5800), and it's well beyond the range of laptops that include switchable graphics. However, it has an i5 processor, so I think it's conceivable that the laptop is being tricked into allocating RAM for integrated graphics. This is especially likely considering I get the same i915 error as the threadstarter here, and I have very similar command line output.

Presumed Problem: Long story short, I think Ubuntu is seeing the i5 processor and setting aside 256MB or so for the integrated graphics which it THINKS I have, which are actually totally unavailable to use on this particular laptop. If this is the case, does anyone know how to make it stop doing this, so I can make that memory accessible to the rest of the system?

Update: Interestingly, even Memtest is showing only 3952MB. This may or may not account for the full missing amount, but it obviously counts for a lot. I'm used to Memtest showing I think 4095MB on my desktop, meaning Memtest itself presumably only takes ~1MB. Actually, even on the laptop Memtest says only 1024KB are reserved, so 143MB are totally unaccounted for.

View 3 Replies View Related

Networking :: Box With 3 Dedicated IP's All Returning The Same Single IP Address?

Jan 20, 2010

I have a linux box, which was given to me by a company with 3 dedicated IP addresses. My goal was to setup ssh tunnels on all three dedicated IP Addresses.

Via Putty, i am successfully able to create a tunnel to the box's on IP1 IP2 and IP3 - that is i can make incoming connections on all three IP's.

However, my problem lies when i attempt to USE the tunnel. AIn all instances, regardless of the IP i actually tunneled into the box with, it returns IP1 as an outgoing connection, i.e if i setup IE to use the tunnel, it will return my IP as IP1, even though i have created the tunenl via IP2/IP3.

What id liek to accomplish is that when i create a tunnel via IP1, then outgoing connections go via IP1, and when i create a tunnel via IP2, then outgoping connectiosn go via Ip2 etc.

After discussing this with a colleague of mine, he infomed me he had the same problem at one point, and that some configuration on the box was required - however he was unable to recall.

View 2 Replies View Related

General :: Bandwidthd Needed For Dedicated Server

Jan 29, 2010

Wath should be the bandwidthd needed for a home dedicated server so i can run several sites on it?

View 1 Replies View Related

General :: Clean /var Storage On Dedicated Server?

Feb 4, 2010

The /var directory is 97% full on my dedicated server:

I would like to know if it is safe to clear it and how to clear it (assuming it will not disrupt/kill server services to do so).

I have Matrix control panel so i can view the storage etc but it does not have an way of clearing the /Var directory.

I have Putty Access to root but do not know which command to use.

I found a few threads but the information is not clear to me as there seems to be an assumption of basic knowledge I don't yet have.

My linux/ubuntu support that usually does this kind of thing for me is away and not contactable and my server is grinding to a halt and unable to store/send email.

I have only a very basic understanding of command line but really need to get this sorted ASAP.

View 3 Replies View Related

Server :: Clear /var/cache/apt/archives On My Dedicated ?

Feb 4, 2010

I have a dedicated server and I am having email issues etc (seemingly) because the /var directory is 97% full

I would like to know if it is safe to clear it and how to clear it (assuming it will not disrupt/kill server services to do so).

I have a 'Matrix' control panel so i can view the storage etc but it does not have an way of clearing the /Var directory.

I have Putty Access to root but do not know much about command line access.

I found a few threads but the information is not clear to me as there seems to be an assumption of (basic?) knowledge I don't yet have.

My linux support guru that usually does this kind of thing for me is away and not contactable and my server is grinding to a halt and unable to store/send email.

I have only a very basic understanding of command line but really need to get this sorted ASAP.

Is it possible and SAFE to delete files via FTP from the /var/cache/apt/archives?

View 12 Replies View Related

General :: Cannot Access Dedicated Server - Apache Error Log

Jul 21, 2009

I was unable to access my dedicated server for few minutes. I have checked the apache error logs and found below notice:
[notice] caught SIGTERM, shutting down
I have tried to search from Google but could not find much information about this error.

View 2 Replies View Related

OpenSUSE Network :: How Does A Server Without A Dedicated Monitor Work

Mar 29, 2011

When you need to change something on the server you can hook up a monitor and a keyboard and do it through the console.

I would like to hook up an external monitor in this fashion for a desktop. The current video card can only support a single display. So I was hoping there was someway to use a second monitor as just a permanent console since simple text shouldn't require a video card?

View 9 Replies View Related

Ubuntu :: GRUB On Dedicated Partition (auto Populate)?

Jul 25, 2010

Im running VMware fusion on my mac book pro and i want to boot my physical ubuntu partition. After wasting hours trying to add the partitions directly into vmware grub complained that it couldn't find the correct partition.

I abandoned that avenue and created a 50MB vmware partition and installed GRUB2 on it so in the VMware i then attached the 50MB grub partition and the 250G physical drive. This all works fine however i cant seem to get GRUB2 to automatically populate the menu. On the GRUB2 partition i have /boot/grub/* and /etc/grub.d/ * and in the grub.cfg i have set GRUB_DISABLE_OS_PROBER=false

however when i run update-grub i get an error saying something like "mkconfig-grub cannot find / is dev mounted?" i can manually run /etc/grub.d/30_os-prober and it prints out a list of all my partitions which i can paste into grub.cfg however i dont want to have to manually do this for each kernel upgrade.Im doing all this via a 10.04 live CD.

View 2 Replies View Related

Ubuntu Servers :: Make A Virtual Dedicated Server?

Sep 29, 2010

if anyone can point me in the direction of a tutorial (step by step) how to make a virtual dedicated server using ubuntu to host a website?

View 1 Replies View Related

Ubuntu Installation :: Getting Webmin On A Dedicated Remote Server?

Jan 29, 2011

I want to install Webmin on a dedicated remote server. I keep reading different blogs/tutorials etc about installing webmin on Ubunto server 10.10 but it seems too easy to be true. There is never any mention of requirements etc. I did read that even perl isn't needed pre install now and will install with webmin.But do i need to install lamp etc first or does it pull these in when Webmin its installed?

View 2 Replies View Related

Hardware :: Delegate Crypto Functions To Dedicated Processor?

Mar 5, 2010

On a bunch of servers, we use integrity checking tool on a large amount of data. Therefore, we compute SHA1 hash from a lot of files everyday. The CPU is a "generic" one, enough powerful for normal use, but get's totally saturated when integrity check begins. Is there any kind of server using a crypto-processor so as to delegate crypto functions to this dedicated processor?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved