Is there any software other that zoneminder that will allow me to view/record multiple webcams at once? I have 4 uvc compliant webcams and have not been able to find some software with that type of capability.
View 3 RepliesI have a large file 'NS0923.csv' with data like the following. There are two records in this multi-record sample.
Code:
E60898,4578910,03/06/09,BEN BOYD RD,61,82,,,127,3,,52000.3046.001,3155,4.00,,PLT,1356,1.00,05/06/09,Y,Y,0551
,,,,,,,,,,,,4057,1.00,CLEAN CAR SHARE SIGN,LAB,0551,1.00,,,,
[code]....
2. I still have to create a file 'transaction.csv' that should retrieve data from $13 - $15 with the identifying column $1. Required output:
Code:
E60898,4057,1.00,CLEAN CAR SHARE SIGN
3. And finally another file 'quantity.csv'. Retrieving data from $16 - $18 with identifier $1. Required output:
Code:
E60898,PLT,1356,1.00
E60898,LAB,0551,1.00
E60898,LAB,3065,1.00
[code]....
purchased a webcam to record videos with in Ubuntu. I plugged it into the USB slot (and audio into the mic hole) and it seems to work ok. But I'd like to record a video from it and save it to a file. How can this be done?I tried Cheese and no audio was recorded.I tried GUVCView and it was fine except for slow video & audio delay.I can't find any other programs for recording webcams on Linux.
View 9 Replies View RelatedDoes anyone know of any good software to record videos with a webcam? I tired cheese but it does not work . I am look for software that will record good quality videos with my webcam. I have been having to use windows for recording videos with my webcam and I hate it! (I hate having to use windows, not recording my videos).
View 1 Replies View RelatedIs there currently any way to record a webcam video with sound? This used to be possible back in the day before PulseAudio was installed by default (by using Mencoder, following guides such as [URL] and [URL] ) but that method doesn't work any more: /dev/dsp doesn't exist. I've also tried Cheese and that again just records a video with no audio. All the articles I can find on the topic are from the good old pre-Pulse days.
I've tried messing about with the commands a bit to use the Alsa Pulse device (defined in /etc/asound.conf) since neither mencoder or ffmpeg seem to have built in Pulse input support:
Code:
ffmpeg -f alsa -i pulse -f video4linux2 -s 640x480 -i /dev/video0 out.mpg
- this works, but the audio is more than a second out of sync with the video, which is a bit useless (I'm trying to record myself playing guitar), and the video is very slow (<1 fps) for the first few seconds.
Code:
mencoder tv:// -tv driver=v4l2:width=640:height=480:device=/dev/video0:fps=30:forceaudio:alsa:adevice=pulse -ovc lavc -oac mp3lame -lameopts cbr:br=64:mode=3 -o test.avi
- this doesn't work, I get the following error:
[Code]...
I have an Acer Aspire One D255. What package would I install to make myself able to record with my webcam?
View 2 Replies View RelatedI'm having a problem using cheese to record video from my webcam. The image is extremely slow to update. Especially when there is lots of movement it sometimes freezes for about a second.
When I use the webcam in Skype it works fine. Does anybody have a clue what might cause this and better yet, how to fix it.
I always get "no camera found" in camera tab in flash player settings . What can be the problem. My camera is working fine. I have flash player also installed and working absolutely fine.
I tried viewing my camera with "cheese" and i can perfectly see it. But i am unable to see it with Flash player. I visited ustream.tv to see if i can broadcast my video but it always shows "no camera found" in camera tab. How do i resolve this? I even tried solution posted in this thread [URL] :-
LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so firefox &
But still it doesn't work. I also tried gkstreamer-properties and my webcam works just fine in video for linux 2.
I have been trying to solve this since 3 hours. Waiting for your replies
UPDATE :- i am now able to view my webcam using the command given above. But how do i the same for chrome? LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so chrome & doesn't work
I want develop an application using webcam.I want to capture the video from webcam and i want to dispay the video.can anybody suggest me how to do that thing using C lanuguage
View 6 Replies View RelatedWe have a webcam that is connected to a tv tuner card via the rca input on the tuner card. I want to set that up so that i can view it remotely over the internet. I've seen you can use vlc to do this, but the problem is that I don't want to have the webcam's computer recording and streaming all the time. I want it to only do that when i want to view it from my remote computer. We don't view the camera at a regular time, so a set schedule wouldn't work.
I hope this all makes sense. Is this possible, and if so, what is recommended for getting this done.I'm hoping i can somehow control this with a remote control and we'd see it on our tv monitor (that'd make it easy for the non-computer people here), so if it could be done in a script that would be great cause i can have the remote run the script.
I have an ATI Radeon HD 3300 on-board video chipset, and an ATI Radeon HD 4350 PCI card. What I want is to have both displays available from one mouse/keyboard. I want to play media on one and have the other as my main desktop.The problem is that with Xinerama enabled, KDE desktop effects do not work (KDE says XComposite and XDamage are not available, even though I explicitly enabled them as extensions in the xorg.conf file), and performance is quite bad. Without Xinerama enabled, performance is great, desktop effects work great, but there's a lot of trouble with full-screen video, and the KWin window manager does not apply in the second display (although I can run a second instance of KWin on :0.1).
View 2 Replies View RelatedAnyone successfully using VNC client on a Mac to control a Debian server?I have the vncserver setup on the Debian machine properly. But I'm having problems connecting to it from both a PowerMac running Tiger and a MacBookPro running leopard.I can connect no problem from a machine running Slack12.2, have not setup port forwarding on my router to connect remotely yet.My Debian machine is running the latest stable release of squeeze with KDE4.I originally tried this with RealVNC Enterprise for OSX but I'm not gonna buy it so I need another alternative after the 30 day trial ends as they have no free version for OSX.
The situation is that I do freelance graphic design on the PowerMac with Cinema4D and Photoshop so I spend most of my time on that machine which is located in my home studio in my attic. Aside from the MacBook and a Dell desktop(family machine)all my other machines and network hardware are in the basement. So to go from the attic to the basement everytime I need to do something on another machine is not practical, and the only other machine I need to access on a regular basis is the Debian box in the basement, this makes the most sense.
I also have a 14 year old living in the house and he's fascinated by all this and will meddle in anything he gets the chance to so all the Linux machines and network hardware need to be behind lock and key.
Now that Ubuntu 10.04 has multi-touch capabilities built-in, if I do not have a multi-touch screen or surface device, can I get 2 USB mice and get 2 pointers on the screen? One for the right hand and one for the left hand as I am ambidextrous, and would find it very convenient to have 2 mice.
View 4 Replies View RelatedIm running 64bit centos 5.6 and using virt-manager.On one of my guest OS's, Windows 7, The max Physical CPUs is 2, you can have unlimited CPU Cores however. (like my machine i use for work has 1, 4 core processor).The issue im having is xen only allows you to set the vcpu arguemnet in your xen config file. How can i set it so that 1 CPU has several Cores just as windows would recognize this machine if i were installing directly to the hardware vs via a VM.Ive searched for 2 days staright trying to address this issue, very little progress, Does anyone know where a XEN support forum is? all i get is the citrix xen support forums.
here is the best info i have found on this, but i dont know how to change this for my CPU to work, when i enter this in my xen config it essentially ignores it and just takes the value of vcpu= so windows shows 2 CPUs each with ONLY one core. Id like 1 or 2 CPUS showing Several cores.The physical Hardware is 2x Xeon 5300 Quad Core CPUs.
> # Expose to the guest multi-core cpu instead of multiple processors
> # Example for intel, expose a 8-core processor :
> #cpuid=['1:edx=xxx1xxxxxxxxxxxxxxxxxxxxxxxxxxxx,[code]........
I have been working in macromedia dreamviewer for editing html and php files, Just now I moved to linux system by installing xampp , my question is that I need a best html and php editor that supports both the design view and code view as like in dreamviewer.
View 7 Replies View Relatedi have sony viao vgn-fz11 Can someone please help ,im new user to ubuntu been trying to get webcam working properly at the moment its upside down and does not work in skype at all just get black screen does this look correct? do i have the right driver?i will try and give as much information as i can.
View 1 Replies View RelatedI have a problem making work a webcam. At the begining, after the instalation of 10.04 in a new laptop, the webcam did not work but with a lsusb I see that the webcam was Webcam 5986:0241 acer. I was not able to config neither use the webcam with any application. After lots of test and forums reading I could not do my webcam to work, and now when I do a lsusb my webcam does not appear.
View 1 Replies View Relatedhow to find out what driver my webcam is using and where its located the webcam it self works but goes from normal to dark after a minute of use and would like to fix it
View 2 Replies View RelatedI want to use my laptop's built in webcam as remote webcam and I don't want to use FTP and post images to a www and use php script or sth, I want to make it accessed remotely as a fast stream and if there is a way I would like to use it with Windows XP - Microsfot Windows Messenger.
View 8 Replies View RelatedI have encountered a bug in plasma desktop - clock widget tool, when browsing months. I found in Kmenu>Development>KDE Bug Management Tool but don't know how to use it. I try everything in the menus to record and reproduce the bug, but nothing happens.
View 2 Replies View RelatedWhy do we use mx record???
View 1 Replies View RelatedI searched around and it seems like other people are having similar issues with multi-touch on Lucid, although my specific problem hasn't been brought up. I have an Eee PC 900A that I upgraded from 8.10 to 10.04. In 8.10, two-finger tapping was processed as a middle click, and two finger scrolling worked perfectly with the other functions.
After upgrading to 10.04, a two-finger tap is now the same as a right click, and middle click is three-finger tap. There does not seem to be any place in the touchpad settings to adjust this.
What's more, if I enable two-finger scrolling in the touchpad settings, the two-finger tapping suddenly stops working. If is change scrolling to edge or disabled, the multi-finger tap functionality comes back again. Has anyone else had this problem? Is there a solution?
I-ve just bought a new hard disk and i wonder what is the best way to do a multi-partition
So my set of drives is:
120Gb - sata
1Tb - sata2
I was thinking to do like this:
1st partition - Slackware Main OS
2nd partition - Arch Linux
3rd partition - /home
4rd partition - swap
5th partition - wind0ws Gaming only
the 120Gb hard drive i intend to do a /home2 for movies, etc. Is that order above the best or i could make swap as 2nd partition
Is it possible to chain together multiple SSH tunnel hops in a single `ssh -L` command on the client side? I have two gateways I need to get through in order to access a remote host. For a normal SSH client connection, it's simple enough chain this all together by simply appending the additional SSH connection commands to the first one:Code: ssh gateway.1 ssh gateway.2 ssh remote.host.
View 6 Replies View RelatedWell this pretty much sums up the experience with Slackware current these days. This is not to say it was all plain sailing. So what problems were there?
1) Nvidia drivers did not work, this was fixed by re-compiling the kernel modules and installing a patched or beta driver, but it introduced another fault. However this problem cannot be accredited to Slackware, all operating systems have driver problems after being updated. Nvidia however had a new version out in a couple of days, which completely fixed the problem.
2) The problem introduced by the hacked fix of the older Nvidia driver wouldn't allow me to switch to the generic kernel (it would not create a valid initrd.gz). I think this was because of re-compiling the kernel modules, so I re-installed them and the problem was fixed. Again not a Slackware fault but a samac fault.
3) Program A couldn't find library B. Slackware has moved some libraries from e2fsprogs to util-linux-ng. This may cause some stuff to break if you are using the multi-lib extensions. This was fixed by creating a compat32 package for util-linux-ng. Again not actually Slackwares fault, but a little closer to home. Alien Bob could you update the massconvert.sh please.
That's it so far, after an update that ran to over 500 lines in the change log, an updated kernel, updated glibc, updates X server etc. etc. and three paltry problems none of which could be attributed to Slackware directly.
I'm using Slackware 13.1_64 with multi-lib. Now that 13.37 is out I would like to upgrade my system but thought I would ask if there are any problems or considerations for upgrading multi-lib systems ?
View 1 Replies View RelatedI want to record sound in F12, but I cannot find any sound recording software.
View 8 Replies View RelatedAll I can record in my computer using The Sound Recorder in Jaunty is 1. It's either MIC or an MP3. You have to turn off one to keep the other and vice versa. How do you record both?
PS I did some homework and they said I need to install a mixer. But I've tried alsamixer, gnome-alsamixer, kmix, jack, they don't the mixers that I need.
PPS I'm recording from Sound Recorder and gtk-recordmydesktop.
I noticed lately the main chat client inserted in the new versions of Ubuntu is Empathy, rather nice, and I saw some very nice integrations in gnome-shell. Only one problem with it, no Off-The-Record (OTR) support, and no interest in implementing it. I am not sure how many of you out there are using it (OTR), but I basically love it, and I feel more safe when I use it. I like Empathy very much, but I do not understand the lack of interested of the developers for implementing such a great feature.
I have made this article, because I just want to do my part, as others did in filing bug reports, and making complaints to introduce this great feature to Empathy. If you want this feature in Empathy there are some places where you can make your voice heard: [URL]...
I know it says there they started to work on it in 2009, but after that no sign of development, basically for me it was just something to calm people down, and make them stop asking for this feature.I did not like the forced removal of pidgin, and the "you can use it, but we are not support it" excuse, but I learned to live with it, and adapt. I admit I am unable to code an otr plugin for Empathy or I would,
I want to record some video on a dvd so I can play it back on my dvd player on the television. Is there some tutorial or something to show how to do this?
View 2 Replies View Related