Software :: Meta Tracker Never Finishes Indexing (resource Hog)?
Jan 31, 2011
I came out with this issue as I saw that my CPU was most of the time between 70 and 80 percent of usage, all by some process called tracker-extract. Maybe when tracker is committing its initial index this is admissible, but this situation repeats every time I boot my notebook and it lasts at least 3 or 4 hours, or until I tell tracker to stop indexing. I hard-reseted tracker to see if there was any corrupt indexes but with no luck, behavior was the same. BTW, this issue wasn't present with ubuntu 10.04
View 2 Replies
ADVERTISEMENT
Dec 8, 2010
I use the latest Fedora 14 with Evolution 2.32.1 and Tracker 0.8.17.In Evolution is the tracker plugin enabled, tracker is not indexing my email.It says in the status: Filesystem 100%, Email 0%, Applications 100% Why are the Emails in Evolution not indexed?
View 4 Replies
View Related
Nov 14, 2010
I have a problem with Transmission. After using it for over six months without a single problem, it suddenly stopped downloading. In the torrents that do no get downloaded, I get an error message Tracker responded: Unknown error (0) in the info window, tracker tab. But there are torrents with the same tracker that don'thave a problem and get downloaded fineThe logs don't give a clue about whats wrong either.I tried downloading those torrents with Vuze and I had the same problem. What could be wrong?
View 2 Replies
View Related
Jan 21, 2010
Fed 12Software update never finishes. Always gets hung at " cleaning up packages" and I see nothing in the logs.
View 3 Replies
View Related
May 2, 2010
When I run this this script in bash it works perfect. When I run as a cron job it starts but never finishes. The reason I know it starts is because a temp file is started by zip but never is completed.The funny thing I was running Linux Mint 8 and this worked fine I just switched to Ubuntu 10.04 & bang no good ..
Crontab -l Output -->
# m h dom mon dow command
18 21 * * * /home/joe/Scripts/./BU
[code]....
View 9 Replies
View Related
Jul 7, 2010
is there a way to disable indexing on 10.04?
View 2 Replies
View Related
Dec 28, 2010
When using Iceweasel to go to an on line classified site (Kijiji) the page seems like it never finishes loading. The circulating thing in the tab never stops rotating.
I wouldn't worry about it but after I get a bunch of tabs opened it will freeze Iceweasel.
View 2 Replies
View Related
Sep 11, 2011
If I start a script that is going to take a long time, I inevitably realize it after I've started the script, and wish I had a way of doing some kind of alert once it finishes.
So, for example, if I run:
really_long_script.sh
and press enter...how can I run another command once it finishes?
View 4 Replies
View Related
Feb 4, 2009
My situation: I have a desktop, with the following sound systems internal to it:HDA IntelSBLive! I also have a Creative Labs webcam connected via USB and another device (VR goggles) which have an audio component.My problem: a fair number of game applications use ALSA card#0 to play games, now pulse's ALSA module is at best lacking, so I don't use that for games. At this point I ahve pulse configured to always use HDA Intel for it's sink, what I would like to do is to configure it so that the SBLive! card is always ALSA card#0, regardless if the 2 USB audio-ish devices are installed. That way pulse can be running and I still get to play the games with native ALSA audio. The trick is how do I force by SBLive card to _ALWAYS_ be card#0 ?Update: there is an easy way, that I should have realized before, which allows for ALSA games to use the SBLive without having it at index 0, below is how to do it:
1) cat /proc/asound/cards
example output (mine):
0 [Intel ]: HDA-Intel - HDA Intel
[code]....
View 2 Replies
View Related
Feb 4, 2010
I am having trouble with beagle. I havent used it for a while (probably since the upgrade to karmic). I have found now that it does not provide any results for any of my files, specifically my pdf files (I am doing a PhD and it is easier to search for journal articles by the author/title than it is to find them on the file system with 100s of files all over the place, I wish I was more organised!).
Do I need to install a sepparate backend to index pdfs?
I had a look in the log files and for all my pdfs (and some others) I get something like this:
Code:
20100202 11:10:42.8736 15579 Beagle DEBUG: Delaying add of file:///home/philip/Desktop/PBR Stuff/Lee 1986.pdf until FSQ comes across it
View 2 Replies
View Related
Aug 8, 2010
On Windows, I used to be able to search for items on my home server quickly if it had indexing enabled by simpily typing a query in the search box when I was viewing one of its drives (i.e. samba shares).Since I moved the server to Ubuntu, I can find plenty of indexing software like tracker but I cant figure if any of them support querying them over the network. I need a fast way to search through all the files on the server with indexing without the hassle of having to VNC into it.
View 1 Replies
View Related
Jan 14, 2011
Where are the indexing options? Can't find them anywhere :S
View 2 Replies
View Related
Jan 14, 2011
Where are the indexing options? Can't find them anywhere
View 1 Replies
View Related
May 4, 2010
I'm concerning about my web server, I use nikto to see where should I improve my configurations, then I just know my web server is enable directory indexing. I have searched and found that I should just put
Code:
Options -Indexes to disable directory indexing. I have already restart apache but directory indexing still enable here is my httpd.conf Where did I wrong ?
Code:
ServerTokens OS
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
[code]....
View 6 Replies
View Related
Sep 5, 2011
I have a Debian Etch machine that was given to me but when it boots up it executes a program that is located on my desktop.
I don't want to move or rename the program but would like to prevent it from starting when the machine starts. Anyone have any idea as to what file I need to edit in order to achieve this?
View 1 Replies
View Related
May 8, 2011
After I finish a download in ktorrent, the torrent stops seeding.
A couple of notes: my download speeds are fantastic (~6mb/s), while my seeding during download is about 60kb/s. However, this seed speed seems to fluctuate a lot from about 3kb/s. Once the download completes, the seed goes to 0kb/s, and the torrent doesn't find as many leachers. For now, after I finish downloading, I re-download a portion of my download at a limited rate of 1kb/s so that the seed continues.
Lastly, I am currently running through a VPN server, however I this issue happens even if I'm running a normal connection.
View 2 Replies
View Related
May 5, 2010
I have a Toshiba Satellite A55-S106 with a bad CD-ROM. It can't boot to USB, so I've taken to doing PXE installs.I had done a PXE install for 9.10. After the install, GRUB told me that it couldn't find the UUID. I was able to edit the grub config file and remove references to the UUID and it booted okay.I tried to do an upgrade from 9.10 to 10.04. The whole upgrade finished, and upon rebooting I saw the purple Ubuntu screen with the red dots, then a blank screen and no hard drive activity. I'm able to read the drive in a LiveCD Environment, but I can't figure out how to make it boot yet.
Fearing for the drive, I put a second hard drive in the laptop and installed 10.04 fresh, again using PXE. Same deal -- install finishes, purple screen, then blank screen and no hard drive activity.Here's a video of the laptop in action:v=T0VgfOA05T0 -- the status lights from left to right are "plugged in", "power on", and "hard drive".I feel like this is probably the same issue as before -- where I should go into GRUB and fix the issue, but I can't figure out how to get into GRUB in 10.04!Does anyone have any ideas as to what might be going on? I have some data on the first hard drive that I'd like -- not irreplaceable, but it would save me some time if I could get the drive to boot. (I apparently said "yeah, encrypting my home directory sounds like a great idea
View 1 Replies
View Related
May 10, 2010
I just installed 10.04 from the minimal install cd (twice), and when I boot it up, it runs fsck on the 3 partitions, shows they are clean, and then nothing. I can't even get to recovery mode. I had previously installed 9.10 fine on this computer. I can't even find out what the real problem is, even with the quiet splash disabled. It just stops after successfully running fsck.
View 5 Replies
View Related
Jul 14, 2009
I'm trying to set up a remote printer.Printer is on a Vista machineI am on Debian testing.This is the result of smbclient for the remote computer:
Code:
$ smbclient -L //192.168.0.10
Enter rach's password:
[code]...
View 2 Replies
View Related
Jan 21, 2010
I have 3d packages I need to use but can't because of this
I am using F12, previously this was in a menu 'System>Preferences>Look&Feel' or Windows, but now I can't find it, do I have to edit a .conf file or .profile file for this or what
View 5 Replies
View Related
Jun 26, 2010
After one of latest update I have problem with meta keys (like shift, ctrl and alt) in KDE. When I press one of this keys, it sometimes stays active after release and deactivates only after I press it again. It's annoying especially while I'm writing some code (php or html) and meta keys randomly stays active after release.
xorg.conf:
Code:
View 2 Replies
View Related
Feb 24, 2011
i would change the tag it applies then it reverts i have even edited them with easy tag it appears to keep but rhythmbox does not register the change and it revers if i change it there aside from re-encoding them is there a way to change the tag on them
View 4 Replies
View Related
Jan 19, 2011
can I index files so whenever I do a find somethingdo find / -name libSDL-1.2.so.0It doesn't take 10 mins. I do know there are packages such as tracker but that one does indexing all the time. I would be happy to have something which can be done by hand or something which is done once in 12 hours or so.
View 2 Replies
View Related
May 7, 2010
I have 4 separate drives, all un-RAIDed.Each drive has almost the same root directories, but different contents in each folder.
For example:
/mnt/sda/TV Shows/Lost/
/mnt/sdb/TV Shows/Your_Favorite_Show/
The goal is to have a single folder that has symlinks to all the files in each of the drives. Pretty much a poor man's JBOD. Previously, I had problems with conditions like 2 drives having the same sub folder contents, but I ended up solving that with the current script I'm using now.What I'm looking for now is speed. I'm very new to Perl and the script takes about 12 minutes to complete with the current drives.
Basically, the script makes a list of all directories and files in each drive. First, it makes the directories. I didn't use any validation because if a directory already exists, it simply won't make one. However, with the files, I used a hash to only keep the unique files. Then I use the key/value pairs with ln to create every link to the files only, not directories.
Code:
#!/usr/bin/perl
use warnings;
my @drives_to_sync = qw ( /mnt/sda/ /mnt/sdb/ /mnt/sdc/ /mnt/sdd/);
[code].....
View 2 Replies
View Related
Mar 14, 2010
I need to do a NFS mount after my PC boot up. So I put an entry in root's cron to do it:
@reboot /bin/mount sun:/mynfs /mnt/sun/mynfs
The mount occasionally fails. But when I manually mount after booting, it always succeed. So I suspect maybe the cron sometimes got executed before the network was started?
Is there a way to delay the mount until after the boot sequence finishes? You know, other than put the command in a script and add a sleep in front of it?
View 2 Replies
View Related
Jul 28, 2011
I have a computation going which takes a long, but uncertain, amount of time. I have another computation which needs to be run, but _after_ the first one is done. I won't be at the computer at that time to manually start the new process. I've done some Googling, and I found how to delay execution by a specific amount of time (e.g. "start process x in exactly 8 minutes from now), but that isn't quite what I want to do. Essentially, I'd like to tell the shell, "When process #nnnn finishes running, then start process x". Is there a way to do this?
View 6 Replies
View Related
Jan 24, 2010
I have a folder that has lots of sample audio files, all in mp3 format. Does anyone know of a way to change artist - album info for all these files in one go. I am wanting to change the artist for all files to myself and album to something like day/date etc.
View 2 Replies
View Related
Mar 25, 2010
i just encoded a mkv file and i noticed that once i remove the .mkv from the file name ubuntu no longer knows how to open the file. i have removed the .extension from my other video files and ubuntu plays it just find so im thinking there is no meta data for my newly encoded mkv file. how do i add meta data for my video file? i have mkvmerge installed but have no clue how to use it also i have avidemux installed can i use either of those programs?
View 2 Replies
View Related
May 23, 2010
I have about 50% of my music collection in wma format from my old Windoze days. I don't want to spend the time ( it is about 1800 songs) to re rip the tunes but I want uniform format. I tried using Sound Converter 1.4.4 but I lost all the meta-data.
View 4 Replies
View Related
May 7, 2010
I'm wondering if complete removal of meta-packages, that being the package itself AND all of its dependencies, is possible in one command of aptitude and/or apt-get. For instance, if I have the whole kde installed, and wish to remove that whole load and replace it with the smaller kdebase, can I do this in two commands (IE, "aptitude remove kde", and then followed by "aptitude install kdebase"). The preceding commands wouldn't work, because just removing the initial meta-package would not remove its dependent packages. BUT, I'm wondering if there is a way to remove a meta-package AND its dependent packages all in one command (rather than having to go through individually removing each one).
View 1 Replies
View Related
