Software :: Installing Kino In Fedora 11 - Libdv Not Found?
Feb 28, 2010
Just did a clean install of F11 on a machine that had had F10 on it. The F10 machine also had been updated to play DVDs (libdvdcss...?)
I was able to "yum install" kino or use the package manager to install it on my F10 machine (nonstandard repository?), but not finding it with package manager in F11.
I have downloaded the source package for kino and and following the installation instructions, but the "./configure" step tells me that libdv is not there:
My jaw dropped at how well Kino worked under F10, and I formatted my Vista partition to make more space on the hard drive for home video files.
View 1 Replies
ADVERTISEMENT
Feb 12, 2010
I've just been trying to convert a video to DV format, but mencoder doesn't know about libdv.
Using the command code...
How can I get mencoder to find the codec? Is there a specific place it looks for them?
View 3 Replies
View Related
Oct 10, 2009
After un-installing ndiswrapper my wireless USB is not being found I can't use it. I have no idea what's going on. My searches have been fruitless and I only have so much longer that I can connect directly to the router. Then I have no internet connection. I have even thought about re-installing or distro hopping, but I like Fedora and don't really want to do that. I have always been told no matter the problem there is always a way around without re-installing, eg this is not Windows.
View 10 Replies
View Related
Mar 12, 2010
I am new to Linux i am installing cvs in it.
I am facing the below problem:sudo /etc/init.d/xinetd reload sudo: /etc/init.d/xinetd: command not found. /etc/init.d/xinetd restart /etc/init.d/xinetd stop.
View 5 Replies
View Related
Dec 1, 2009
Trying to launch Second Life gives the following error message:
You are running the Second Life Viewer on a x86_64 platform. The most common problems when launching the Viewer (particularly 'bin/do-not-directly-run-secondlife-bin: not found' and 'error while loading shared libraries') may be solved by installing your Linux
This problem was easily found using search with solutions for Fedora 11.
The following information has been found for adding the 32 bit support to Fedora 11 but it does not work in Fedora 12.
The file created in the instructions below is a list of the 32 bit libraries. It is then called as input to yum to simply install them.
"Add the Libraries Next, add the 32-bit libraries by copying the following list, and pasting it into a text file. Save it as �Fedora-ia32.txt�."
Another post says that was all unnecessary as the following commands would do the same thing.
Could have simply been achieved by calling:$ yum install SDL.i586...(Or by selecting SDL.i586 in add/remove programs.)
The problem I have with Fedora 12 are neither of these will install anything in Fedora 12. Looking at add/remove programs does not yield anthing that looks like it is 32 bit support when searching with the argument "SDL".
Does anyone know how to install 32 bit support into Fedora 12 64 bit version ? I like the simple yum expression rather than long lists like the first example uses, but I'll try anything if it works.
A side question to this entire experiment is what chance would you give to Second Life being able to be run remotely using VNC? I would think if it runes on the Linux machine, using a remote terminal would have little impact. Using VNC isn't the usual way this will be run, I just wonder if it would work at all.
View 3 Replies
View Related
Feb 12, 2010
I've just downloaded the latest build of Kino, but can't figure out how to install the package kino-1.3.4.tar.gz I already have kino-1.3.3 installed via synaptic, but it won't export h264 to mp4.
View 9 Replies
View Related
Feb 11, 2015
When trying to render text with kino on amd64, I get:
Kino experienced a segmentation fault.
Dumping stack from the offending thread
Obtained 2 stack frames.
kino() [0x43bdb0]
/lib/x86_64-linux-gnu/libc.so.6(+0x321e0) [0x7f844b8401e0]
Done dumping - exiting.
I tried 'rm -rf ~/.kino-history' but this did not work.
I realized what I could have done wrong. I added deb-multimedia.org as a repository and installed mythtv and avidemux. I also did an update with aptitude and an upgrade with aptitude.
View 1 Replies
View Related
Jan 27, 2011
I use Kino to transfer dv from my camera and also use it for video editing, but there are very few GUI options when it comes to transcoding the edited files into, say, h264. Kino is using ffmpeg, and I know there are a plethora of options. For instance, here is the output of the logfile from a file I made with h264 and the best quality available in Kino.#options: 768x576 fps=25/1 cabac=0 ref=1 deblock=0:0:0 analyse=0x1:0 me=dia subme=8 psy_rd=1.0:0.0 mixed_ref=0 me_range=4 chroma_me=0 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 chroma_qp_offset=-2 threads=2 nr=0 decimate=1 mbaff=0 bframes=0 keyint=300 keyint_min=25 scenecut=0(pre) rc=abr bitrate=2048 ratetol=2.0 qcomp=0.50 qpmin=2 qpmax=31 qpstep=3 ip_ratio=1.25 aq=1:1.00Frankly, I am not that impressed with the result, and would like to use settings that give a better result, e.g. adjusting bitrate and more passes
View 1 Replies
View Related
Nov 24, 2009
Does anybody know what has happened to Kino - the video capture utility? Used to be packaged by packman for Opensuse but doesn't seem to be available for 11.2.
Is there an alternative I can use for video capture - or has packman just not gotten around to adding this yet?
View 1 Replies
View Related
Aug 9, 2010
I'm getting dropped frames from both Digital8 & MiniDV camcorders using Kino. MyCPU doesn't seem to be spiking. I've made sure compiz is disabled and no memory/cpu hungry apps are running. I'm using SATA drives so DMA shouldn't be the issue.
The video and audio that is captured seems to be fine.
Hardware info:
CPU - AMD 64 FX-55 Processor
Mobo - GA-K8NXP-SLI
01:07.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller
01:0a.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 01)
View 1 Replies
View Related
Feb 11, 2010
I recently migrated my system to Karmic 9.10 from Hardy 8.04 Now that I want to convert some .avi videos to H.264 in Kino for upload, it doesn't work. In Hardy all was fine, I'd import the .avi files and export to h.264 mp4, then upload to ..... etc ... no problems. But with karmic; after I import the file into Kino, I then trim out the bits I don't want. Next I go to Export and select H.264 MP4 Single Pass (ffmpeg), then click the Export button; it 'locks the audio' and that's it - takes 5 seconds to 'finish' no matter how long the video clip is, and no mp4 file is generated or appears in the selected folder (same result with H.264 MP4 Dual Pass).
View 9 Replies
View Related
Jul 10, 2010
I'm trying to capture video from my Sony DCR-HC21 video camera. I've managed to install Kino fine but was getting the error
aw 1394 kernel module not loaded or failure to read/write /dev/raw/1394
I could get it working by opening as root but then the files belong to root which I didn't want. So I did the following (as suggested in another thread:
chmod 777 /dev/raw1394
And now I get the error "No AV/C compliant cam connected or not switched on"
I've tried so many things ie [URL]
and as I'm a novice I'm reluctant to keep trying random things when I don't really know what its doing.
OK, it's back to the first error, is there anyway to run Kino and capture video without changing to root?
View 9 Replies
View Related
Feb 26, 2011
I'm trying to use Kino in Ubuntu Maverick Meerkat with a Canon ZR45MC Digital Video Camcorder. Kino is capturing the video, but not the audio.I have it connected by a DV Firewire. I've used it with Windows Movie Maker that way, and it worked fine.
View 6 Replies
View Related
Feb 10, 2011
I wanted to package my software as an RPM by rpmbuild command. When I run that it complained that gcc not found.
I downloaded gcc and tried to install that from a tar ball. And it complained about cc: coomand not found. I dont know why is this error being shown because I think cc and gcc are the same. Correct me if I am wrong. My system details are:
I tried to download rpm files for gcc but they dont exist for Suse 10.
View 7 Replies
View Related
Feb 11, 2010
I'm trying to install iw-0.9.19 on xubuntu.When i type the command "make", i get:
/bin/sh: pkg-config: not found
/bin/sh: pkg-config: not found
Makefile:38: *** Cannot find development files for any supported version of libnl. Stop.
[code]....
View 2 Replies
View Related
Dec 2, 2010
I am trying to install the gtk+ package so that i can install grapher which require gtk+-2.0
When I ./configure gtk+ I get this (lots of output before what I pasted):
configure: error: Package requirements (glib-2.0 >= 2.25.10 atk >= 1.29.2 pango >= 1.20 cairo >= 1.6 gdk-pixbuf-2.0 >= 2.21.0) were not met:
No package 'gdk-pixbuf-2.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.
Alternatively, you may set the environment variables BASE_DEPENDENCIES_CFLAGS
and BASE_DEPENDENCIES_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
How/where can I find this package. I tried the usual apt-get to no avail.
View 1 Replies
View Related
Dec 31, 2010
I'm trying to install lsyncd 2.0 and I am having troubles... Apparently when I do a
Code:
./configure
I get this error
Code:
checking for LUA... no
checking for LUA... no
checking for LUA... no
checking for LUA... configure: error: Package requirements (lua >= 5.1.3) were not met:
No package 'lua' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LUA_CFLAGS
and LUA_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.I know for a fact I have LUA installed.
Code:
alex@Onyx:~/Downloads/lsyncd-2.0.0$ lua -v
Lua 5.1.4 Copyright (C) 1994-2008 Lua.org, PUC-Rio
I even added the location of the LUA binary to the PKG_CONFIG_PATH environment variable but it's still throwing me this error.
Code:
alex@Onyx:~/Downloads/lsyncd-2.0.0$ $PKG_CONFIG_PATH
bash: :/usr/bin/lua: No such file or directory
EDIT: For some reason, when I built and installed LUA, the "lua.pc" file was not copied over. So I copied the "lua.pc" over to my /usr/lib/pkgconfig/ folder and the ran the ./configure again. This time it worked.
View 1 Replies
View Related
Feb 17, 2011
I am trying to install rails 3.0.1 on ubuntu 10.10. I am getting this error towards the end when i execute this command sudo gem install rails --version 3.0.1.
View 1 Replies
View Related
Jun 21, 2011
so i was removing softwares using ubuntu software center.. games i don't play and cheese webcam booth because it was not working, i intended to re-install it. after my installation, half my icons (i have extensively personalized my desktop) changed to defaults. The themes page said 'theme will not be as it appears because default.kde is not installed'. i did not remove any such package. just games. and furthermore, i installed a kubuntu plasma desktop system which i read in a thread contains the file default.kde but that hasn't helped and i still don't know what do to..
View 1 Replies
View Related
Mar 28, 2009
I am a pretty new user to linux, I am trying to run a program called car whisperer. The file can be downloaded here trifinite site - the home of the trifinite.group the readme says to install just type $make #make install but this does nothing and I am not sure how to install it. There is a file called makefile which I try to run in terminal but it just gives me all sorts of errors about not being able to find files and directories. I have seen it run and the person simply types ./carwhisperer to run the program but I also get no directory or file here as well (probably cause I have not installed). I was able to install some programs using sudo apt-get install (filename) but I haven't found this command to work for this program.
View 5 Replies
View Related
May 15, 2010
I want to activate cpu frequency scaling on my home computer. I have an athlon 64 3200+. I know that it supports frequency scaling, because when I got the processor I also got a CD with the Cool n'Quiet driver. I've tried with the powernowd service, but when I try to start it I get Code: * Starting powernowd... * CPU frequency scaling not supported...
and if I try to start cpufreqd I get Code: No cpufreq interface found, not starting cpufreqd In the meanwhile I've noticed that I also don't have powernow-k7 kernel module installed. If I try a modprobe powernow-k7 I get: Code: FATAL: Module powernow_k7 not found I have no ideea where I can get this kernel module.
View 1 Replies
View Related
Mar 3, 2010
I've been asked by my boss to install RHEL 5.4 onto a HP Proliant DL380 G3 which we have here. Now I'm a total linux newbie but can figure my way around most things but this has got me stumped.
I have downloaded the RHEL 5.4 i386 DVD iso and burnt it OK. But when I boot from the CD in the server it doesn't recongise it. I put the DVD into any other server/PC and it boots fine. The server also boots fine from other CDs'DVDs?
Anyway, I thought I would try the boot.iso instead so I burnt this and the DL380 boots fine. I try the default install option, select country/keyboard layout/ select local CDROM as the install type and this is the problem now.
It ejects the boot CD so I put in the RHEL 5.4 DVD and it keeps saying:- the red hat enterprise linux server cd was not found in any of your cdrom drives I have reburnt the DVD and same problem. I have also tried creating a VM with the DVD and this boots and installs fine in VMWare so I know the DVD is good.
View 7 Replies
View Related
Oct 11, 2010
no acceptable c-compilier found when installing vlc offline. mozzilla can't connect to internet but I can ping my server
View 3 Replies
View Related
Jan 9, 2010
actually during the installation of ns 3.6, with the following command ./waf -d debug configure i get some components not found specially pybindgen i have downloaded it but cant install it and bind it with ns
View 8 Replies
View Related
Jul 12, 2011
I'm trying to install neon so that I can install SVN in order to try to install a Web Page Replay server.
When I run the command:
I get the following error:
I was able to install apr and apr-util and believe it also requires an XML parser so perhaps this is just an issue of pointing neon to the XML parser?
View 6 Replies
View Related
Nov 16, 2010
I installed Fedora 12 and it said 500 software updates available. When I tried to install them I got this error message:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo 'Error getting repository data for $s, repository not found' $ (repoid)
View 4 Replies
View Related
Oct 21, 2010
I am looking for gcc installation in CentOS 5.4. I cannot use yum install since not connected to internet. I tried to do sudo apt-get install build-essential but received the following error: sudo: apt-get: command not found How to install gcc in my Linix machine?
View 2 Replies
View Related
Jan 19, 2015
I just installed debian (Jessie) in my computer and tried to install Nvidia drivers. This is a task i have done many times and never got a problem but today...
Here you have my output...
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
Current Operating System: Linux PC-Server 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ck
[Code] .....
View 7 Replies
View Related
May 25, 2011
I'm new to this and trying to install flashplugin to the terminal. I entered apt-get install flashplugin-nonfree, and it says package not found. What do i do. I can't install yahoo messenger without it or see any videos on ..... or any thing that requires adobe.
View 14 Replies
View Related
Oct 15, 2010
I've got an Aspire one Linpus Linux Lite and I have a problem installing Skype. When I tried to run Skype after downloading I got the following:
skype: /usr/lib/libstdc++.so.6: version 'GLIBCXX_3.4.9' not found (Required by Skype)
In the terminal window I typed the following: rpm -q glibc And got glibc-2.9-2 How do I install the required packages/libraries?
View 2 Replies
View Related
