I want to install xvidcap (http://sourceforge.net/projects/xvidcap/) but after extracted it i don't know how to install. I readed README/INSTALLATION file but I CAN NOT FOLLOW IT.
How can i do it now?
Have just assembled a new computer and thought I would install the 64 bit version of openSUSE 11.2 in a "Windows free zone". After a hiccup or two I have managed to get a system of sorts running but on trying to copy files from my old computer(via a memory stick) it tells me that Vfat is an unknown file system.On my old computer I am running 32 bit openSUSE 11.2 as a dual boot system with Windows XP and have no problems moving files between the two different file systems.Is it possible to get a 64 bit file system to read 32 bit file system drives and if so how do I do it?
View 7 Replies View RelatedI'm only just starting out with the Linux ubunto 10.04 OS after yeas of wasted time on Microsoft os's,I hope I'm posting this request for help in the right forum thread, if not please accept my apologies, I have tried searching everywhere for help in installing a firmware file into the File System / lib / firmware directory and each time I get an access denied result. The file is for a DVB board and I have managed to track down the right Linux fw file for this particular piece of equipment, Could some kind helpful person either explain how to get this firmware file into the Root System directory or even send a link to another site that deals with this sort of problemI've downloaded all the programs via the Ubuntu Software Center that should be able to perform this task however all to no avail.The reason why I posted this thread in this forum board is that it (in my own personal opinion which may be wrong) seems to me to be a security problem
View 1 Replies View RelatedWhy do I keep getting .gvfs (gnome virtual file system) file appearing as corrupt in /~/usr directory, I can get rid of it by unmounting, but it re-appears later on. It is causing problems as it interrupts my backups (which are automated) with an error message,ListError .gtk-bookmarks/.gvfs [Errno 13] Permission denied: '/home/jimt/.gvfs'
drwxr-xr-x 2 jimt users 4.0K Jun 22 22:00 .gstreamer-0.10
-rw-r--r-- 1 jimt users 132 Jun 24 11:50 .gtk-bookmarks
d????????? ? ? ? ? ? .gvfs
-rw------- 1 jimt users 4.3K Jun 24 11:50 .ICEauthority
drwxr-xr-x 3 jimt users 4.0K Jun 23 08:41 .icedteaplugin
I just trying installing OpenSuse 11.2 on a Dell Dimension 4500 2.0 Ghz with 512 mb memory and 40 gb hard drive.During the installation the following error was produced: "System Check for partition /dev/sdb1 contains no valid Ext4 file system". After the install process was completed, the keyboard and mouse were not useable
View 7 Replies View RelatedI bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
My Redhat Enterprise Linux 4 with 6x partitions (/, /boot,/home, /usr, /var, /tmp) of 6.0 GB IDE Hardisk was working quite fine. I decided to create LVM on /home and /var partitions but due to some errors occured and I delete the /home partitions. That's why partition table altered. I then delete 4,5,and 6th partitions (/home, /var, /tmp) partitions and now try to create one by one but following error is coming:-
[Code]....
The Super block could not be read or do not describe a clear ext2 file system. E2fsck b 8193 <device> I have tried following commands,but could not successful:- e2fsck -p /dev/hda7 (where hda7 was created but afterthat it was deleted) e2fsck -a /dev/hda7
How to install .dsc file
View 1 Replies View Relatedi have a tutorial question to do and don't know where to start, the question is install a workable nfs fileshare system between your system and a remote system, using optimum values for rsize and wsize
View 1 Replies View RelatedSeen something like this somewhere but can't remember exactly what it was.
How can linux be installed into one big file that resides on a FAT filesystem?
Note: not an .iso that is read-only, but a file that can be written to.
I am so confused! I changed my security profile to 'paranoid' (i'm a linux noob' and accidentally locked my self out of everything! Including su, sudo, YaST, etc. (openSUSE 11.1)
View 9 Replies View RelatedRecently I installed openSuSE 11.3 x64 on PC with Intel motherboard, 4GB RAM & two of 1TB WD RE3.Of course I set RAID1 during installation After some struggle with GRUB which pointed to wrong devices after installation I started to work. But suddenly I found that file system is corrupted after every reboot (It does not depend on what I use and what the way I use - reboot, shutdown -r now or even just poweroff - everything follow to:
Starting MD Raid mdadm: /dev/md2 has been started with two drives
mdadm /dev/md3 has been started with 2 drives
mdadm /dev/md4 has been started with 2 drives
mdadm /dev/md5 has been started with 2 drives
[Code]...
I just got openSUSE 11.2 set up on my home server. The machine has two 2TB HDDs, the first (/dev/sda1) is partitioned thusly:
10GB /
1GB swap
1.82TB /home (/dev/md1 in RAID1 array)
[code]....
After my normal update of the system, firefox is showing up with missing plugin "Download Flash Player" msg. The system thinks that the player is installed. How can I get the system to install a rpm flash file installer that I have downloaded?
View 6 Replies View RelatedI want to perform a clean install on my machine - it's had loads of rubbish installed, and is a real mess. Trouble is, while I have downloaded the ISO file, I do not have any blank CDs. Is there a way to mount the ISO and run the installer from within a running system? Probably not, but I thought I'd ask in case I missed something.
View 1 Replies View RelatedI have downloaded the linuxdcplus 1.0.3 source file. However i am unable to install the same in my fedora 11. could anyone guide me and all with detailed step by step instructions and the possible options?
View 1 Replies View RelatedI want to install php-5.3.0.tar.bz2 in linux5.0 and then want to run the saved php file in firefox web browser. please explain me all the detailed steps of installing & configuring and also about running php file.
also tell me if any another rpm or package we have to install to run the php
running 11.0,Linux 2.6.25.20-0.5-paeusing a 3ware 9500 adapter - raid 5 array with hot sparethe system is only 6 weeks old.several days ago, apache would stop responding. trying a restart gives:
/etc/init.d/apache2 start
/bin/mktemp: failed to create file via template `/tmp/apache2.nb6xHyzlga2e': Read-only file system
[code]....
After a fresh install of Debian I came across an error Im hoping you guys can help me with. Ive searched for the error and it appears there are multiple reasons that could be causing it. To compound the problem, Im at work so I dont have the specific error messages....so I just installed Lenny (standard install, no desktop) using a USB installer and everything went very smooth. On first boot, the system paused while waiting for the root file system. After a minute or two it just errored out complaining it could not find the root file system and put me at a (vmlinuz) prompt?My guess is that I need to go into my bios and change my boot priority.. but again, thats just a guess.
View 1 Replies View RelatedI'm a long time user of Debian, but I'm having trouble with my partitioning process. Here is where I currently stand:
I am installing the latest Wheezy build. I am trying to install debian with an encrypted LVM that spans two hard disks.
My partitioning layout is as:
1. /home
2. /root
3. swap
4. /boot
I then added partitions 1, 2 and 3 to a physical volume group. I then took that physical volume group and added it to a logical volume. Then I encrypted the logical volume, leaving the /boot partition untouched. I was under the assumption that the only partition the system needed free to reach the loading of the LVM is the /boot partition, as it holds the files necessary for booting. But when I attempt to finalize the disk, it gives an error stating, "No root file system detected". That would be an issue as it is currently sitting inside the encrypted LV. Am I wrong in including the root partition in the encrypted LV?
What is the best way of having as little of my file system non-encrypted as possible while still allowing a proper boot?
I can't login due to my file-system being full. I found the main area with the large usage. Var/log is taking 99.5% of my var folder. On a full file-system scan Var/log is taking up 85% of disk use. File-system capacity is 36 gig. Temp is cleared after each boot.
What can I do to clean up any unnecessary files. I can only boot in safe mode and have limited navigation skills. To get scan results I booted a live-disc.
Opensuse 11.2 gnome 64 bit.
If you have a contiguous partial piece of an ext4 file system (assuming it's perfectly clean), starting from the beginning of the partition, is there any way to check it, or to mount it to get the files whose parents, inodes and data are all completely contained inside?
Have (or maybe had) a very large 11TB RAID 6 array, filled with a single large ext4 partition. Something strange happened when a single drive failed and the array ended up failing 13 out of the 11 drives. I had trouble getting the array restarted, and got to the point where I exhausted all of the options I considered completely safe. I considered a few things that may have worked, but mdadm doesn't seem to have a definite "do not change anything" option. So I decided the only way to be absolutely safe would be to clone the disks before proceeding - then I realized how much time that would take and sent the drives off to a recovery service so they could image them and check it out.
Before doing so, I copied the first 2GB from each disk. I XORd the images from the working drives to reconstruct the data chunks that were on the failed disk, manually assembled the chunks, and am very confident that I have 22GB of "correct" data in a single file. The parity and Q syndromes all matched (with RAID 6 you can still check with only 1 missing device). I've learned the fine details of ext4 from [URL], and have looked at lots of raw data from the reconstructed partition, and it all looks good. The recovery company says that they're not finding many inodes, but I found a lot of them, exactly where they're supposed to be. I tried to mount and e2fsk, but both processes seem to be extremely unhappy that the device size doesn't match the size implied by the file system geometry.
I considered hacking the superblock to manually reduce the size, but I figure that wouldn't work because there would then be more group descriptor blocks than it would expect after the superblocks. I might try doing that and compensating by incrementing the "reserve block count" to compensate. Alternatively, if there is some way to make the file appear to be the expected size with nothing but zeroes after the end of the actual data, maybe I could mount it and not get any errors until I cause the kernel to read past the true end of the file.
I have tried 4 times now to install but it keeps freezing. I wiped my hdd with a tool from UBCD and im starting fresh with a full install of Ubuntu 10.10.I'm installing from a LiveCD. Should I format the hdd in some way before install?
View 5 Replies View RelatedI'm having a problem installing Ubuntu using wubi. I get the error:
09-20 23:51 DEBUG TaskList: ## Running uncompress_target_dir...
09-20 23:51 ERROR WindowsBackend: [Errno 2] The system cannot find the file specified
and later on in the log:
[code]...
I'm new to Linux world. I'm using Ubuntu 9.04. I'm unable to go online using Ubuntu because I'm unable to run an executable client application provided by my ISP. I called them and they are not able to help me instlling this client applicatoin for me on my Ubuntu. "I cannot go online untill I install this ISP client application on my Ubuntu." I'm entering my ISPs weblink in this blogpost so that it would be easy for you guys to help me resolving this issue. http://www.spacenetindia.net/download.php This is the weblink where I downloaded that ISP client application from. I clicked on this link and clicked on 24online clients.exe tab located on the left and downloaded linuxclient.gz. Please help me if you find any resolution for this issue. Though I tried downloading Wine but I could not as I cannot go onlnie in Ubuntu. In windows I don't know how to install wine to make it work offline in ubuntu.b
View 14 Replies View RelatedHow to convert FAT file system to NTFS file system via Ubuntu,are there any commands to do this task?
View 2 Replies View RelatedI want to convert the file system on my boot drive from ext4 to btrfs.
I have converted by 2nd drive, unsure of how to convert the boot drive and partitions.
I downloaded the ISO from the Ubuntu site. I can run it from the CD without any problems however, when I install it, it freezes. I am installing on a 2nd hard drive in my computer. It gets up to the point of "Creating ext4 file system for / in partition #1 of SCSI1 (0,1,0)(sdb)... I've tried deleting the partition and creating one by myself with no prevail. I am going to school for computer networking and my counselor told me that it'd be a good idea to learn the Linux OS for my major.
View 2 Replies View RelatedI'm a little bit confused with partitioning the filesystem in Linux. the difference between creating the file system with fdisk and mkfs (when formatting the disk). I can't clearly tell my problem, so please look at this picture:
View 2 Replies View RelatedToshiba notebook is set up to triple boot win7, mepis 8.5 and os 11.3.Recent update of os11.3 left system with boot failure, "file not found".I booted mepis and used utility to reinstall grub, but no joy.
Appeared to install ok but on reboot, sda5 identified as 'mepis' not os11.3 and would not boot. Win7 & mepis boot ok.
Next, booted live Parted Magic and repaired as per another thread here, but again, no joy.NONE of the systems will boot.Rebooted mepis live cd and reinstalled grub again. Sda5 still identified as mepis and will not boot. Win7 & mepis boot ok.