Software :: How Does One Properly Setup Mysql For Mythtv Under Slackware?
Jul 30, 2011
How would I edit the files, for this under slackware with permissions for my other users to use it? I have been following the guide, and I have not gotten far. I have created the recommend mythtv user and have mythtv installed. Also should I switch to 64bit slackware for this project? I have 1 gig of ddr2 ram, 64 bit capable pentium 4 ht cpu clocked at 3Ghz, 80gigabyte internal hard drive, and I have a wintv card.
I'm running a Slackware64 13.0 machine with the following line at the end of crontab -e: Code: @reboot rm -rf /tmp/* Yet /tmp is not clearing. This exact same setup is working fine for me on two 13.1 boxes and a -current machine; what gives?
The upgrade actually went pretty well, except for what looks like a new "feature" to mysql-server-5.1. But I post here, because the issue seemed to be in "/etc/hosts" file. If it should really be somewhere else, feel free to move it. The problem is that I don't understand what this means. What potential problems do I have without a "127.0.1.1"? Or could this have been effected by some change to the "users" table in mysql? This mythtv server "musem" is my main machine, and is being remotely accessed by the Linux box next to my TV.
I'm trying to setup MythTV, but whenever I do so, I get no text on the X window setup screen. The language selection takes a very long time (input is super delayed) and I don't see anything on the screen. This last time I ran it it went the farthest it has gone before, but it always hangs at the theme file selection, as shown by this Terminal output.
Code: Loading window theme from /usr/local/share/mythtv/themes/Terra/menu-ui.xml Loading menu theme from /usr/local/share/mythtv/themes/defaultmenu//mainmenu.xml
I'm new to slackware and I am going to try install 13 but I would like to know how well MythTv will run on slackware 13. There are so many parts to MythTv that I thought there might be issues with depedencies not being up to date, etc.If you have it running on 13 were there any issues to work through?
I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk: /dev/hdx (a1-a3,b1-b3) /dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850 M2N-SLI Deluxe (Nvidia AM2) 4x1gb of 1066 kingston hyperX 3x500gb WD Caviar Black Sata2 3.0
I recently set up replication on a production server and some rows are not making it to the tables on the slave. After 3 days I can see 200+ entries (of 161,000~) that are on the master and not the slave. Logs under /var/log including mysqld.log, mysql.status, messages do not show any problem.I have already tried dropping the DB on the slave and setting up the replication again by doing a stop slave, set slave options such as were in the logging to start, drop table, restore the dump previously made by the master, start slave, but the issue persists.
I following the documentation on the MySQL site for setting up replication so I'm not sure why this is having issues.What can I do to investigate and fix this?
I'm rather new to linux and I am trying to set up two linux servers to do MySQL replication. I believe to do this you need to have a file called my.cnf in /etc/ but this file isn't there I have tried un-installing and installing MySQL many times but this file still doesn't appear.
I have an mysql innodb ~ 20gigs. Normally shutting down mysql (service mysql stop) takes a few seconds. When I reboot Ubuntu with the reboot or shutdown command it just reboots it super fast without mysql logging (/usr/sbin/mysqld: Shutdown complete) Also during this shutdown the following is failed: umount2: device or resource busy /data: device is busy.
mysql is setup to read from /data . Why is ubuntu not waiting for mysql to properly shutdown before unmounting the filesystem and rebooting?
I have a load balancer with 2 web servers behind it. The web servers rsync with cloud storage to update their apache directories 1 time every hour. Apache is just running php pages that pull/push data to a DB so they dont need to be updated that often. However I need to figure out how to implement a Master/Master MySQL setup to have my web servers point to for the PHP stuff. I need to implement it without having a single point of failure. The Load balancers are useless for failover as they only detect availability based on Ping request. So putting a master/master setup behind a Load Balancer is out. what is the best way to setup the master/master mysql in a HA setup without the use of a load balancer provided by the host?
I bought a new laptop HP Pavillion dv3-4170ee that has Core i5 2.53ghz dual core with hyper threading, intel hd graphics and Ati Radeon HD 5470 512 mb dedicated. It came with windows 7 64bit. It also has 6 gb ram(2gb in first slot + 4 gb in the second one).I installed slackware 13.37 64 bit. It installed just fine. installed lilo onto mbr. When it boots up it shows the slackware screen. I am able to boot into windows just fine. When I select Linux it boots into linux bios data check successful. lots of stuff goes on the screen the normal linux boot stuff. and then it goes to the next screen and stays blank
Nothing happens and even the hard disk light is not blinking.By the way the HDD is Western Digital.
I have plugged an LG TV to my laptop using RGB cable. However Ubuntu recognise it as another brand. The result is that the image of TV is shown reddish. How can I properly install the TV?
I just installed ubutnu 9.10 and just installed samba. I edited the config files to workgroup to dhome which is the work group all my windows comptuer uses to share files. I want to share files and also be able to access files off my windows computers. I got onne windows 2000 that has a username needed to be typed in to access it. the rest is accessable. In the config file. I uncommented the security= user thing. I now tried to access the network but still fails.
Here is what I can see. when I go to places and click network I see windows network and click it it will say dhome and Workgroup. when I click on the dhome folder it takes a while and then gives me the error saying sorry didnt' get a list from the server. what do I need to do to access the network?
I have setup a second machine with slackware 13.37, it is a "supermicro" which I picked up though my work. the idea was to set it up as a gateway and gradually expand my knowledge of sub networking, iptables, forwarding and the like. after a couple nights of forum searching and "o'reilly" book reading I am still unable to get a proper route working thru the "supermicro" to our dsl router.
What is setup?: I will start from my main machine simply calling it slackbox slackbox: has two ethernet cards which i have given static ip's to eth0 192.168.2.16 and eth1 192.168.3.11 eth0 (192.168.2.16) is connected to a switch and then to our dsl router, it is working, I am using right now to work on this forum. eth1 (192.168.3.11) is connected to the "supermicro" thru a cross-over cable, it also is working, pinging the "supermicro" works. default gateway on slackbox is set to be 192.168.3.10 (the supermicro)
I only set slackbox's default as 192.168.3.10 when testing to see if the supermicro gateway will work supermicro: also has two ethernet cards which i have given static ip's to eth0 192.168.3.10 (this is the card with the cross-over cable connected) pinging 192.168.3.11 (the slackbox) works. eth1 192.168.2.24 is connected to our switch as well, it is working, pinging our dsl router works. default gateway on supermicro is set in rc.inet.conf to be 192.168.2.1 (which is our dsl router)
All my machines have two ethernet cards. This has just made it easy for me to test the setup while still having internet access on slackbox. Yet when testing the gateway from slackbox thru supermicro I am getting "Destination Host Unreachable".
I had setup an encrypted home directory on my computer, following all the instructions. However, after one reboot, ecryptfs told me "ERROR: Encrypted directory not setup properly." So I rebooted into an Ubuntu Live CD and ran ecryptfs-recover-private. It found my encrypted dir and asked for my login passphrase. I entered it and it told me, "ERROR: The key required to access this private data is not available." Is there any brute force way to recover the key?
I'm currently running Koala on a Dell Latitude D630. I've been with Ubuntu since Hardy, so I have some experience, but this is beyond me. Basically, I was at school, closed my laptop, and bicycled home. When I opened it up at home, I saw a blank screen. When I tried to reboot, I was told that the disk couldn't be mounted. When I boot a LiveCD, I can see my two disk partitions (/ and /home) as "16GB Filesystem" and "95GB Filesystem". The 16GB system can't be mounted, and I'm pretty sure is fragged. I tried reinstalling Ubuntu, figuring that would fix it, but no luck- it starts fine, but it gets about halfway through and then says it can't install the files.
The machine is still under a service contract with Dell, so swapping out the HD itself isn't such a big deal. It would be nice to get my data, though. I can successfully mount the 95GB (/home) system. I then see two folders "dan/" and "lost+found/". I can't enter the "dan" folder because I don't have permission. Opening a terminal and navigating to /media/95GB Filestystem/dan/ works if I "sudo su root" first, but not as "ubuntu" In the dan/ folder, all I see is "Access-your-private-data.desktop" (because my /home directory is encrypted) and "README.txt". The README says to run the command "encryptfs-mount-private".
When I do that, however, I just get the message ERROR: Encrypted private directory is not setup properly I tried putting my decryption password immediately after the decrypt command, a la: encryptfs-mount-private mypasswordgoeshere but with no change in results. The one ray of sunshine in all this is that I backup my /home directory to an external every week or two. So the actual data loss is not catastrophic. But it *has* been a busy week, so I would really like to recoup that data, since it includes little things like the first chapter of my dissertation, and the job negotiation emails in my .evolution folder.
I am using CentOS5 and installed the MySQL for server during the installation. I can set up and use MySQL databases. But I cannot make it startup everytime the server restarts. And quite a lot of methods need this folder "support-files/mysql.server", while my set up cannot find this. I am wondering if my installation of the MySQL for server is complete or not.
Long story short: I opted to encrypt my home, enter the passphrase and soon as I log out and rebooted, I got stuck with a message about /var/lib/ICEauthority file and other messages. So I've been trying to fix one issue at the time. The bottom line is that I'm trying to get to my private folder. Dropped in recovery mode:
i want to setup a mysql server, however,,there are no mysql packages version 5.1.53 in the opensuse 11.3 repo's even not phpmyadmin where can i find mysql, mysql-client, mysql-community-server for version 5.1.53?
On Windows and Mac it's as simple as downloading some WAMP and XAMP stack and clicking "install".
On OpenSUSE I'm trying to do it myself. I went into YaST and installed the "Web and LAMP Server" pattern.
Then I edited the default-server.conf file to point towards my website by changing the DocumentRoot and <Directory "blah blah"> lines.
Then I tried to start apache, but got the following error:
Code: # apache2ctl restart httpd2: Syntax error on line 188 of /etc/apache2/httpd.conf: Could not open configuration file /etc/apache2/sysconfig.d/include.conf: No such file or directory So I just went into httpd.conf and commented out that line.
I will preface this post by saying I am completely new to any flavor of Linux and even in Windows. I don't do much in the command line so I am very much at the steep part of the learning curve. I have Ubuntu Server 10.10 installed on a vm using VirtualBox. I installed the Server GUI, Apache and MySql using the command line. Now I want to be able to use a GUI for MySQL so it should be an easier transition coming from MS SQL. I downloaded MySQL Workbench which sounded like the add on I wanted. I have the .deb file on a CD. Now I have no idea how to put it all together.
Following guide for CentOS 5.5 i've installed mysql server on my box.Next step was setting up password for root user.As you undestood, it failed. output:
Code: # rpm -qa | grep mysql mysql-devel-5.0.77-4.el5_5.3
Good tutorial, using images for a lamp server that has, MySQL,PHP, Apache, FTP with all the fruit for running a server that will host a Gallery, forum and main site
I know there's heaps around for Ubuntu 9.10, but its not quiet what I'm looking for as in Gd, ImageMagick and some extras for Apache mods
I am looking into setting up replication in a production environment but currently this is on two test machines. I am following the documentation at [URL] but I am unable to get past "16.1.1.10 Setting the Master Configuration on the Slave". When I do the CHANGE MASTER TO I am getting a syntax error for some reason. What am I doing wrong? These servers run "CentOS release 5.5 (Final)" and "MySQL 5.0.77-log Source distribution" installed via yum. The only changes from default are that I created a single database on the master before doing the table lock and dump, then everything else has been done exactly to what the documentation states, but is still failing.
The option skip-networking is not in the config file on either server and neither one runs SELinux or any firewall.
mysql> CHANGE MASTER TO -> MASTER_HOST='192.168.1.220' -> MASTER_USER='repl' -> MASTER_PASSWORD='removed'
i have problem to get my 5.1 surround sound card to work properly on Slackware 13.37 with example the Mplayer, Spotify or even when watching movie-clips at .....s. I have searched through forum but havent find any solutions to this problem.I have tested my sound card and it seems to work properly when executing "speaker-test -Dplug:surround51 -c6 -t wav" in the terminal. I have saved the ALSA settings through "alsactl store". But like i said, it still doesnt work with explicitly programs like Mplayer or Spotify, it still plays the sound as 2.1 (stereo).
Running FF 3.6.13 on Slack 13.1 (32-bit). Every time that I use FF when I close it the processes that are spawned when it starts never end. I have to manually go and kill them. It is pretty annoying more than an inconvenience since I don't normally use FF. Unfortunately I have to use it, every now and then, for some things and if I need to restart it I have to open a terminal and kill the processes.
I've tried re-installing on top of the version that I have there, and actually uninstalling and installing it again (of course making sure that all of the directories are gone), I've also tried renaming my ~/.mozilla directory (in case there is a problem with the profile).
how to build luabind properly on slackware, or I guess any distro. I have not been able to build it for the last hour and it has really made me angry. It seems everything lua pisses me off, because they really like not to use any sane build system.So far I've tried doing what they said, and I got the boost source both from the link they provide and from the slackware source directory. The one they provide make a jam0, which looks for a Jamfile, which does not exist. The one from the slackware source directory does make a bjam, but when I run it it looks for boost, not for luabind. It's just madness. If only I could get in touch with the luabind devs so I can curse at them and send them hatemail.
