I'm running into a little trouble trying to configure bind as a caching dns server on centos 5.6. for debugging purposes I've got iptables and selinux turned off, but I can't get see the dns service on my local network. on my server itself I can run nmap against it and see that port 53 is open, but if I try it from another computer on my network the port is closed.
View 7 Replies
I want to configure proxy caching on my openSUSE boxYast >>> Proxy >>>
View 5 Replies View RelatedI've set up a caching nameserver on my laptop running Fedora 11. The problem with this is that NetworkManager always overwrites the entry that points to the local nameserver. NetworkManager no longer respects /etc/dhclient.conf or at least its scripts run after dhclient.conf. Also it doesn't respect /etc/sysconfig/ network-scripts/ifcfg-* setting of DNS{1.2}.The man page of NetworkManager describes scripts that run in /etc/NetworkManager/dispatcher.d which can be run when interfaces are brought up and down. I've written a script that will put the entry needed for the local nameserver.
View 1 Replies View RelatedI don't understand this error nor do I know how to solve the issue that is causing the error. Anyone care to comment?
Quote:
Error: Caching enabled but no local cache of //var/cache/yum/updates-newkey/filelists.sqlite.bz2 from updates-newkey
I know JohnVV. "Install a supported version of Fedora, like Fedora 11". This is on a box that has all 11 releases of Fedora installed. It's a toy and I like to play around with it.
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
i have successfully done the setup of postfix and dovecot on this link [URL]I run Cent OS on top of window 7 via VM Player,i want to access mailbox from windows 7 using email client like Thunderbird and Outlook. What setting i need to do in my mail server ?
View 1 Replies View RelatedMy upstream DNS server is a bit slow, so I've installed the dnsmasq cacher locally. I have the service starting on runlevels 2, 3, and 5. But I can tell by Firefox's behavior that dnsmasq does not work upon boot. Firefox lets its own DNS cache expire after 60 seconds. When I do my second Google search five minutes after my first, the second DNS lookup for www.google.com is just as slow as the first.If I manually restart the dnsmasq service, I get the fast name resolutions I expect.
View 2 Replies View RelatedI am trying to setup my home server for test purposes. Now the IP I have assised my home server are
192.168.1.2
192.168.1.3
Port 80 is open in my firewall and Selinux is off at the moment.Now I have my DNS at my registar pointing at my home IP. Will that work? I have my name server configured with my local ip. Should I use my externel?
Folks, I have an old notebook (IBM T23) running as my print server on the home network. Recently my wife needed to fax some documents. No problem, said I, I will just set up a fax server. That was months ago and I have achieved nothing more than dig a deep pit. Sigh.
Could some kind person give me step by step instructions for this?
Setup: LAN including IBM T23 with an external modem (it has an internal winmodem, but I expect using that to be just too hard) and running FC10. This machine currently has the only printer, accessible from all machines on the LAN.
Wish list: Be able to fax from any machine on the network, via the T23->modem. Preferably, to see the fax device as a printer on client machines, so it is a simple matter for my wife to 'print' to the fax. Machines on the LAN are FC10 (wife) and FC11 (me). Ability to receive faxen is not necessary, but if it is feasible I MIGHT try to set up for it too. The phone line is our normal house line, so I don't want the fax to pick up any incoming call unless I instruct it to.
Current status: Hylafax installed on the T23. So far cannot make it recognise the external or internal modems. Have not figured out how to make it appear as a printer on the T23 or over the LAN. The problem is me, but at my advanced age I am not too proud to admit my failing grey matter and ask for help.
Kind regards, Doug.
I want configuration a DNS server for my area! What DNS server software is better than other software?
View 4 Replies View RelatedThis may or may not be an easy question, as I'm somewhat uninformed in the networking side of computer science. I own a rented server with a static ip address. Is there a way that I can forward requests from it to my computer to setup a LAN network of sorts over the internet. Specifically, there is a program I would like to use that requires LAN (you enter an IP to connect to). Is it possible to setup my server in a way that users could connect to my server's ip, which would then forward it to my home computer (I'm fine with setting up my home computer with programs that would allow this) that could host?
View 2 Replies View RelatedI am trying to connect to a nfs server on my local network ( the server is a fedora 12 box ) using slackware 13.1 but I am having some problems. First of all I am sure that the server is configured ok and my desktop can ping the server but when I try :
mount -t nfs 10.0.0.1:/home/usr/file /home/usr/tmp I get the following error : mount.nfs: No route to host
And when I try to rpcinfo -p 10.0.0.1 I get the error :
rpcinfo: can't contact portmapper: RPC: Remote system error - No route to host
I have a problem with my slackware 13.1 that is that i can�t access it outside my local network. It�s running behind a router and i have activated the DMZ to my slackware computer i can access the web with my slackware computer but i can�t get access to it outside my LAN.
View 8 Replies View RelatedI am trying to setup a Caching-Name Server for my lab but I am unable to locate the named.caching-nameserver.conf under /etc directory. I am trying to use this file as a template.I already checked the /usr/share/doc/bind-* for samples but unable to find it.I am using RHEL5 with bind and bind-chroot packages installed.
Can someone tell me where I can find named.caching-nameserver.conf file? Also, I notice that there isn't /etc/named symbolic link... do I have to create the sym link to /var/named/chroot/etc/bind.conf
I had problems with my Ubuntu Server 10.4, so I reformatted and reinstalled (I only choose OpenSSH from the install menu), then after it rebooted I installed apache. So I can access the machine via web, ssh and scp from within my local network, but strangely outside my network I can access it from web, but not ssh or scp. Nothing has changed on my router.
View 9 Replies View RelatedI'm trying to set up a small Intranet system to run OpenERP or similar using browser-based clients. I have an Ubuntu machine running 10.04 desktop edition to act as a temporary/testing server until we set up a proper, dedicated machine with 10.04 server edition. I have installed Apache2 from the repos and it is up and running fine - locally. That is the problem, I can't access the server from other machines on the LAN. Ping works, btw. So I've been reading tutorials and howtos for the past week, but for the life of me, I can't find what I'm doing wrong. The standard Apache setup seems to be made to "just work", so although I've looked at the various configuration files mentioned in the tutorials, I haven't actually changed anything.
View 9 Replies View RelatedI just setup a ubuntu 10.10 box learn linux and to play around with, and want it to host my website. I can see the web site on my local network no problem but the outside world gets a time out message. I check to make sure everything is forwarded correctly on my router and the dns so i has to be something in ubuntu blocking out-of-network traffic how do i turn port 80 on to the outside world
View 4 Replies View RelatedI am trying to setup a DNS server on my local network. When I set linux clients to use it, it works as expected. However, when I set windows clients to it, the root name doesn't resolve. For example, I have a zone called daniel. On linux "anything.daniel" resolves to the correct ip as does "daniel" which is the behavior I want. However, on windows 7, "anything.daniel" resolves correctly, but "daniel" doesn't. I am new to BIND9 so my config is mostly copy and pasted. Here is my zone file for daniel (where #.#.#.# is the ip I want daniel to resolve to):
@ IN SOA ns1.daniel. admin.daniel. (
2007031001
28800
3600
[code]....
I'm trying to connect to a data server (basically a big hard drive) in my lab with my computer. On the Mac that's at the workbench next to me, you enter Go -> Connect to Server. From there, enter the IP address that I have (I can't find a server name--just the IP.). It asks you which subsystem you want, queries you for a user name & password, and then opens a window with all the files. Meanwhile, on my Ubuntu machine, I have a "Connect to Server" option under "Places" on my main menu. But when I choose that, I need to select what kind of server it is, from several options that don't seem right. (It's not FTP, it's not SSH, it's not a form of HTTP, and that leaves "Windows share?") I've tried several things, but usually get back 'Cannot display location "smb://<IP-ADDRESS>/" The specified location is not mounted'. I've tried many ways of mounting this drive, but it usually gives me permission denied errors (even though I *know* I have the right login and password--I've logged in using the aforementioned Mac).
View 13 Replies View Relatedhow to configure dhcp server in a local lan network
View 2 Replies View RelatedI'm using CentOS 5.5 as a media server to stream media content over my local network. Currently i'm having problem while installing last.fm scrobbler.
Here is a sample output:
yum localinstall xmms-scrobbler-0.4.0-7.fc11.i586.rpm
Loaded plugins: fastestmirror, priorities
Setting up Local Package Process
Examining xmms-scrobbler-0.4.0-7.fc11.i586.rpm: xmms-scrobbler-0.4.0-7.fc11.i586
Marking xmms-scrobbler-0.4.0-7.fc11.i586.rpm to be installed
Loading mirror speeds from cached hostfile .....
The program package-cleanup is found in the yum-utils package.
Upon searching my hard disk this is what i get:
find / -mount -name libcurl*
/usr/share/man/man3/libcurl-easy.3.gz
/usr/share/man/man3/libcurl-tutorial.3.gz
/usr/share/man/man3/libcurl-share.3.gz
/usr/share/man/man3/libcurl-errors.3.gz
/usr/share/man/man3/libcurl-multi.3.gz
/usr/share/man/man3/libcurl.3.gz
/usr/lib/libcurl.so.3
/usr/lib/libcurl.a
/usr/lib/libcurl.so.3.0.0
/usr/lib/pkgconfig/libcurl.pc
/usr/lib/libcurl.so
So it tells me that I need libcurl.so.4, but I couldn't find any suitable rpm binaries for it. The only rpm that i found was for Suse and Mandrake. How to set this up, so that i can get a fully functional media server.
I'm setting up my server under CentOS 5.5 (text mode) and I installed cherokee server but I couldn't reach it with the ip given by ifconfig. So I figured it might be an problem within cherokee. I also wanted to install webmin so I did that to see if I could reach that one. But also the webmin server is not reachable (I know the port number should be behind the ip ). So if I look up ifconfig I see the server has got an local ip (192.168.1.42) but I can't reach it from another computer in the same local network.
View 1 Replies View RelatedI have a lab of 10 computers with ips from 192.168.1.120 to 192.168.1.130 the server's Ip is 192.168.1.116When I am on client computer I type the server's Ip address on the browser and it works. All i want is that instead of entering my servers Ip I could just enter an address like: example.lan
View 3 Replies View Relatedloss password to network. when trying to login to a local Server it tries to Authenticate from the network. Can anyone tell me how to change it back to a local Authentication or to reset network password.
View 2 Replies View RelatedI'm trying to setup a NAS for my network, the only problem is that I can't figure out how to do it. On my network I have about 3 computers however only I only use 2 of them so I thought that maybe I could use the third computer in such a way that I could access it 24/7 from the internet as a server for all of my files (school papers, music etc etc...). The only problem is that I don't know where to get started. Both of the computers I'm currently using are Windows and the one that I,hopefully, can turn into a server is running on Ubuntu.
View 4 Replies View Relatedin writing a scriptI've written the following small script to turn on my server which is on my local network:
Code:
#!/bin/bash
# init
[code]....
I am trying to host a local website(an wiki application) within a network. Is it necessary that all the files I need to upload should be in the var/www?
View 8 Replies View RelatedI'm trying to make a local package server for my offline development network. Can anyone recommend a mirror containing every single package for CentOS 5.4 x86 as well as 64 bit? I've looked around but I haven't had too much luck yet.
View 1 Replies View RelatedI have configured Master and Slave DNS server in Red Hat Linux 4 Enterprise. I want to know about what is a Caching Nameserver and in which situation we use it? If there is a master and slave DNS server we can use cache name server as well ?
View 7 Replies View RelatedI found in the following mail thread: [URL] That we can add, netgroup: caching compat and also the netgroup caching rules stanza in nscd.conf But the mail thread is for FreeBSD Unfortunately, I can't get any reference for RHEL 5.x I need to do exactly same stuff. The following line in my nscd.conf was enuf to leave me disheartened, :'(# Currently supported cache names (services): passwd, group,hosts The nsswitch.conf on my system works only with following: netgroup: nis Does neone knows if netgroup caching is supported by nscd.conf.
View 1 Replies View Related
