Fedora :: SunStudio CC Compiler Error
Oct 27, 2009
I managed to figure out how to issue out the CC compiler command by issuing a symalink to the usr/bin I have now have this problem when I try to compile any C++ code I recieve this error
"/usr/include/stdio.h", line 485: Error: "(" expected instead of "__attribute__".
I went on the sun forums and they dont or give a solution due to Fedora not being test when developing this tool, so I was wonder if I could run into someone who has a solution to this problem
This is my last road block so I can fully finish my programming assignment
View 2 Replies
ADVERTISEMENT
Dec 22, 2009
I have been trying to install MATLAB 2008b as a standalone version; however, every time when the process runs to 18% it shows an error as follows: "There was an error extracting the archives for MATLAB compiler. Chceck that you have enough disk space and rerun the installer."
I did have checked the disk space which is much more than enough. I have also changed few different disks that are way more than enough as well, about 5GB at least, but this error still popped out when it runs to 18%.
View 9 Replies
View Related
Jan 30, 2011
I am trying to install Apache on my remote server. I've downloaded the latest Apache Http Server and when I configure it I get this error: configure error: No acceptable C compiler found in $PATH. So I download and extract the latest GCC Compiler and when I try to install that I get the same error:
configure error: No acceptable C compiler found in $PATH I am really stumped... Can anyone just offer ideas. My server is running CentOS 5.4 x64 and I'm remotely trying to download and install a running LAMP setup for Joomla. I'm using a shell to communicate with a cloud server type.
View 1 Replies
View Related
May 16, 2011
I am using Red Hat Enterprise 5 and have downloaded GCC 4.4.5 and trying to install or configuring the same, but getting some problem.
Code: # mkdir objdir
# cd objdir
# srcdir/configure Output of command
Code: checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
[Code]...
configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. this to install GCC package.
View 1 Replies
View Related
Jul 6, 2011
I'm pretty new at working with Linux/Unix systems, just started dealing with the CLI a week or two ago at work so bear with me if my questions/problems seem obvious, they probably aren't to me. URLs are at the bottom since I can't hyperlink to them. We have a server with Red Hat Enterprise Linux Server release 5.2 (Tikanga), x86_64 GNU/Linux. For the past few days at least (not sure when it began) every five minutes we get two messages for CPU0 and CPU1 saying: "Temperature above threshold, cpu clock throttled". Occasionally it says they are normal, so they're not *always* above the threshold but a majority the time.
The server doesn't have internet, so I interact with it and transfer files via ssh/telnet/sftp from my Windows PC to another server running Fedora release 10 (Cambridge) to the RHEL5 server. I have been trying to install lm_sensors to try and read the CPU temperature and possibly the fan speed, but every installation method has failed. I have tried installing it via the yum command I read about on this page (URL 1), but since it doesn't have internet access it didn't work. I then tried manually installing using the instructions on the lm-sensors.org page (URL 2), but whenever I try to install anything (gcc, libtool,
libsysfs) it shows:
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in '/home/user/src/libtool-2.4':
configure: error: no acceptable C compiler found in $PATH
I then looked up how to install gcc, but when I found a .rpm file of gcc 4.1.2 for RHEL5 I tried installing that like it mentions here (URL 3), but there are lots of [dependancy] programs I can't find a .rpm for as it seems they are all outdated and hard to find for RHEL5. Do I need to find the installation CD in order to install gcc? And is there any other way to check the cpu temperature or to know how to disable/fix the messages about temperature being above threshold?
View 1 Replies
View Related
Sep 9, 2010
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
View 2 Replies
View Related
Aug 11, 2010
I am using a arm compiler to build my program but getting following compiler error at the end -
init.c.text+0x2c): undefined reference to '__libc_csu_fini'
init.c.text+0x34): undefined reference to '__libc_csu_init'
View 1 Replies
View Related
Mar 3, 2010
Have just installed Red Hat on my HP machine (previously running Windows). Thereafter I've been struggling to install various software like flash, media player etc.While most have been successful with much help from this forum, am stuck with the installation of xine media player. also my 320GB external HDD (in NTFS format) is not being read by the system. I downloaded some ntfs drivers but am getting the same C compiler error.
View 2 Replies
View Related
May 26, 2010
I am using the C++ compiler G++ to compile my programs on Linux Mint 8 - Gnome.
I recently installed QT and when I tried to compile a simple "Hello World!" program it gave me this error:
Quote:
This is the code in HelloWorldQt.cpp:
Code:
I have tried using GTK instead but I get a similar error.
View 7 Replies
View Related
Dec 14, 2010
So for those of you who has built GCC from source would know that you can't install GCC without an existing GCC. So my question is, what would happen if all computers in the world suddenly just died, and all you had was the computer in front of you, and a copy of GCC 4.5. How would you install that?
I ask because I would like to install GCC 4.5 on my old powerbook G4 mac without installing a binary GCC provided by Tiger 10.4 disks. I would like to build GCC from source, without an existing GCC to complicate updating.
View 6 Replies
View Related
Jan 6, 2011
i'm a new on linux system and i have a problem with SUSE 9.1. I google for yast repositories to install "gcc" but i only see for release 10+. So i think 9.1 version it old version. The thing is that i can't upgrade the SO because it's a "sever" for some applications, and my problem is that i need to install Nagios, but when i type the ./configure command its says:
checking for a BSD-compatible install... /usr/bin/install -c
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
So I decided to install packages with yast, but i can't find any active repository. I very new on this, and i don't know if i'm doing right the things. Also i don't have too much practice on english.
This is the info of the SO
* uname -a:
Linux noc 2.6.5-7.111-default #1 Wed Oct 13 15:45:13 UTC 2004 i686 i686 i386 GNU/Linux
* cat /etc/SuSE-release
SuSE Linux 9.1 (i586)
VERSION = 9.1
View 9 Replies
View Related
Apr 6, 2010
I am getting this message: internal compiler error: Segmentation fault
Please submit a full bug report,
with preprocessed source if appropriate. for every compilation that takes longer (ie: linux kernel, kde sources etc.)
I've tried other OS (at that moment I was on Fedora 12, now on Debian; was a Suse also) and it didn't work. I've tried replacing my hard disk, since it needed an upgrade either ways - that didn't work either. I assumed that it's the RAM fault - tested them with memtest and it says they are fine. Does anyone know what else I can do in order to figure out where the problem is?
View 3 Replies
View Related
Jul 20, 2011
I have been trying to install MPICH2 on a server node for a cluster I am building running RedHat 5.5, and when running the "configure" shell file, it gives me the error message: "configure:4533: error: no acceptable C compiler found in $PATH." I tried to install the gcc c-compiler from the installation disk, but it had the dependency "libgomp.so.1()", which I cannot find on the disk nor on any web site. Where can I find this dependency or get a different c-compiler?
View 5 Replies
View Related
Nov 16, 2010
I am facing an amazing problem with GCC compiler. When I copy any C code from any documents or texts and paste at gedit and try to compile it with using GCC compiler, it gives error. But when I typed the same code, it executes.
View 6 Replies
View Related
Mar 22, 2010
When I try to install wxGTK SlackBuilds. I get this error:
Code:
./src/aui/auibook.cpp: In member function 'size_t wxAuiNotebook::SetSelection(size_t)':
./src/aui/auibook.cpp:3482: internal compiler error: Segmentation fault
Please submit a full bug report with preprocessed source if appropriate.
See [URL] for instructions.
make: *** [auidll_auibook.o] Error 1
I tried redownloading the wxGTK-3.8.9.tar.gz file and reinstalling it, I get the same error.
View 8 Replies
View Related
Feb 5, 2015
I have moved from MS directX to OpenGL on Linux Debian. My computer is running Jessie version with Gimp. I am trying to use several of the gl 4.0 functions but getting compiler error. I check for OpenGL version and appears to be version 1.5 .... How can I verify the correct openGL version and how can I upgrade to a moder version of at least 4.0?
View 4 Replies
View Related
Jun 29, 2010
Install problem: no acceptable C++ compiler found in $PATH (Trying to install freeciv, game) ... checking whether we are using the GNU C++ compiler... no checking whether g++ accepts -g... no checking dependency style of g++... none checking whether the C++ compiler works... no configure: error: in /home/peter/Download/freeciv-2.2.1': configure: error: no acceptable C++ compiler found in $PATH See `config.log' for more details. Other threads suggest install gcc which I thought I already did yet it didn't solve the problem!
View 9 Replies
View Related
Jan 19, 2011
I have a NAS (dlink-320) with a fully working fun_plug (http://wiki.dns323.info/) Linux system.However when I try to install x263 the configuration scripts says it need the math function log2f()But because fun_plug uses uClib instead of glibc and uClib have not yet implemented log2f() function I am trying to compile the glibc instead. I am only interested in the math part of glibc but have not found any documentation to just compile this part so it seems that I have to compile "most" of it. have gli
I have copied glibc-ports-2.9/sysdeps/arm to glibc-2.11.2/sysdeps.and I enter
Code:
../configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --enable-shared --build=arm-linux
but get the following error message
[code]....
View 2 Replies
View Related
Jun 10, 2010
I'm trying to do a ./configure on ntfs-3g, and I get this error that says "error: C compiler cannot create executables." I have gcc, g++ and everything installed, but I don't have build-essential. It's an offline server so I can't use apt-get to install it. I also can't find an RPM for CentOS. Is that what I need to resolve this? Or is this error caused by something else?
View 8 Replies
View Related
Dec 9, 2010
I'm trying to compile a program on Cygwin and it seems like as soon as I solve one problem, another pops up. This time, trying to run configure gets me an error message.
The relevant part of my config.log is included below:
I installed Cygwin with everything that was in the Devel folder, just to be on the safe side.
View 6 Replies
View Related
Feb 20, 2010
I downloaded Go-OpenOffice from SlackBuilds.org, but I can't build it. make terminates with configure error: checking for C compiler default output file name. configure: error: in `/tmp/SBo/ooo-build-3.1.1.5': configure: error: C compiler cannot create executables See `config.log' for more details.
(I can't find config.log anywhere) I use a quite 'light' installation (no xap, ap), and I suspect that I have some unmet dependencies, but the error message provides no information about what software is needed (I've installed all dependencies listed on SlackBuilds.org). I'm using Slackware64-13 with Xfce
View 3 Replies
View Related
Jan 17, 2010
I am running a server which is hosting a site where members can upload videoclips. I noticed that upon upload a thumbnail is not created for the videoclip. I found out that ffmpeg needed to be properly installed and in my case ffmpeg-php as the site runs on php. So far so good. I followed the instructions found somewhere to install ffmpeg-php but stall at the command: dot slash configure && make The error I get is:
checking for egrep... grep -E
checking for a sed that does not truncate output... slash slash bin slash sed
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
I presume it's because gcc is missing. how I can start tackling the problem and ultimately get gcc running so I can install the ffmpeg? I am really sorry I was hoping to elaborate a bit more but I get an error: You are only allowed to post URLs to other sites after you have made 15 posts or more. so I guess I need to wait and describe it differently.
View 4 Replies
View Related
Jun 22, 2011
I have a platform independent compiler. so, i created the common api's and platform api's using my complier. so i have this library files named cmn_api.a & platform_api.a in my auto/linjtag/lib.(they will be created when we run the makefile of the compiler).
The problem is when i'm trying to run the console application of my compiler. i have a menu.c from which i choose different modes and i operated on that.
When i tried to open one of the executable i'm getting this error:
View 4 Replies
View Related
Feb 21, 2010
I just installed RedHat and I need to install a compiler (among other things). When I go to 'configure' gcc I get:
configure: error: in `/Compiler':
configure: error: no acceptable C compiler found in $PATH
Why in the world would you require a compiler on the install of your compiler!? I may be dumb in many respects, and I'm sure that people will attest to that, but I'm not that dumb...How do I install gcc without a compiler? What, specifically, do I do with the configure script (or executable, I don't know what it is...)
View 8 Replies
View Related
Jan 15, 2011
I have searched google for a couple of days, and I keep hearing about an INode limit on filesystems, but that doesn't seem to be the case.
Now whenever I try to download something, watch a ..... video, or listen to Pandora radio, it just stops playing after 2 seconds. Downloading says "No space left on device".I also get the error as root.I do have 5% and more free of HDD space. After reading the similar posts I checked all of this, so if I am overlooking something on the forum, I apologize for an extra post about.
View 3 Replies
View Related
Sep 2, 2009
where I can download the GNU compilers. I installed Fedora 11 today dual botted with 64-bit Vista on an HP 64-bit computer. I found a little short description on gnu.org, but no links to download sites. Since I don't have a compiler installed already I will need to install the binarys instead of the source code.
View 7 Replies
View Related
Jan 17, 2011
How can i get g++ compiler in ferdora 14. i cant compile any program in frdora 14.
View 3 Replies
View Related
Aug 10, 2009
Im using Fedora 10, and I need to install a c, and c++ compiler. I've downloaded codeblocks, but when i try to compile and run the code, nothing will happen. What other compiler should i use? what is the best c++ compiiler for fedora?
View 5 Replies
View Related
Nov 7, 2009
I have recently installed Fedora 11 and I am having some trouble with it. While installing another program I get the message: make: g77: Command not found
I tied to look for the compiler to install using yum search g77
And got the following list:
I was wondering if it is in some obscure repository, which would seem odd to me. I have the following repositories available (as shown in yumex) :
View 2 Replies
View Related
Jan 14, 2010
I am in the process of building some packages with the Intel compiler (icc) and was wondering how to make it the default compiler when using rpmbuild.
View 3 Replies
View Related
