I am running LogAnalyzer 3.0 on one of our servers, and I wanted to know if anyone knows of a way it can be configured to generate reports that can be exported and e-mailed to the System Administrator?
View 1 Replies
I'm a satisfied user of ubuntu 11.04 64bit (installed on a laptop). Everything works fine (unity, sound etc) no problems at all except that when I shutdown my computer on of the services is marked as FAIL.
In a boot log I found:
* Stopping automatic crash report generation[74G[[31mfail[39;49m]
Ok updating, nothing serious, can be ignored or uninstalled.
Recently installed Ubuntu 10.04 (I think) on my laptop as a dual boot with windows. Now, whenever I start my computer, the grub menu boots and I choose to run the generic ubuntu.
However, I get the message:
Stopping Automatic Crash Report Generation [FAIL]
And the screen freezes at that. No further progress is made and I have to restart my computer. The only way I can run ubuntu is by running it in safe mode with low graphics.
Today I upgraded my 10.10 to 11.04. Since the last step of upgrading, when it was restarted, I get stucked in consola where it is checking, and there is written fail at stopping automatic crash report generation. How can I repair it. I tried to do
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo reboot
but it doesn't do it properly.
I am testing LogAnalyzer 3.0, with several Linux servers configured to send their log files to the central server. All Linux servers use syslog as the daemon of choice. While it does appear that LogAnalyzer to be working somewhat, I noticed that a particular log file present on all servers, secure, does not have any entries appearing at the central server. The configuration of the secure file, via the /etc/syslog.conf file, on all servers is shown below:
Code:
# The authpriv file has restricted access.
authpriv.* /var/log/secure
Do I need to make any additional modifications to the syslog.conf or any other file?
I want to run ssh-keygen -f [filename] but also specify no password. I know the -N option is used to specify the password but putting -N with nothing after it isn't permitted.
View 4 Replies View RelatedI have tried almost all the music programs ie, banshee, rhythm player and I cannot figure out how to get it to work.
View 3 Replies View RelatedI have recently started PHP and mysql and so far I am loving it. I have read that the best way to learn any scripting/programming language is to read others code and get involve in a project. I am planning to develop a ticketing system for my intranet environment, meaning it will only be available to certain specific personnel to generate tickets, just like a helpdesk system. So a thought came in my mind, that, if a ticket is generated, a email should be sent to the relevant personnel pointing to that ticket. Now what I mean by this is, like if I have posted a query on LQ.org, a email notification is sent with a dynamic url pointing to my post if someone answers it. How its done? I mean is it done by PHP engine or apache?
View 2 Replies View RelatedI Have a system,on which I have dynamic internet, I want to generate a mail to my specific mail id as exp-123@yahoo.com. Like this,to give me the information about my dynamic IP Address. I also want that if my internet reconnects then the mail must be generated to give new IP address information.
View 3 Replies View RelatedMy project looks like this:
Home
The Team [no-page]
-X
-Y
-Z
Projects [no-page]
-Coding [no-page]
--A
--B
--C
-Desing [no-page]
--E
--F
-Security [no-page]
--G
--H
Note: the Code/Design/Security projects pages (A,B,C,D...) will be at start around 35 pages, and will grow. My index.php is something like this:
PHP Code: .....
What I would like to know is how to build the content (the home-main.php)? Do it dynamically based on a link something like this index.php?page=coding_b, and put in the index.php page a number of 35 if/else statements to cover all the project pages or ... static, creating every page for the projects menu when I create the menu? I check if a page 'pro-co-a.php' exists, if not I create it based on some template and do the query to get the content from db or? How to organize the pages, if using static page?
Generally on my system(Karmic x64), if I generate a pdf, any image included comes out distinctly blurry. I have googled and come across this [URL] which says when there is a pdf generation, everything is recompressed, hence the blurriness. How is there a way around this? What do I tweak to ensure pictures are left alone (I already ensure they are as small as possible) when I convert anything to pdf?
View 2 Replies View RelatedI am developing a customization of ubuntu for my company, as we mirror ubuntu repositories it would be great that the distro's sources.list be configured for using our repos instead of ubuntu's official on install, without the need of me going PC by PC making such configuration myself... How could this be achieved? Is there documentation about it? I have only managed to find data on how to configure the sources.list after installation.
View 3 Replies View RelatedMy ipod shuffle (1st generation) will not mount in Ubuntu 10.10 64 bit when I plug it into my usb port. When I plug in the ipod I do not get an icon being created for it on the desktop. I have also checked nautilus and there is no storage device for the ipod showing when I click on computer in nautilus.I have also checked /media in nautilus and there in no listing for the ipod. The only way I can see the ipod in Ubuntu is if I open up a terminal window and use the command lsusb which then shows a listing for the ipod.
If I have the ipod plugged into my computer before I turn it on and then turn on the computer to boot with Ubuntu, Ubuntu does not boot in the normal graphics mode but boots in text mode where I have to type in my name and password on a black terminal screen. The ipod has the latest software on it as well as being reset back to original factory settings. I have no problems using the ipod if boot up on windows 7 and plug in the ipod.
I've been trying to get an iPod nano 5th generation working with slackware-current, with no luck. Currently, I have upgraded to gtkpod 1.0.0 and libgpod 0.8.0. I've run iPod-read-sysinfo-extended successfully, which wrote the SysInfoExtended file in /<ipod_root>/iPod_Control/Device.
After those steps, gtkpod would copy the mp3's to the device, but would fail writing the database. So, I generated the HashInfo file from the firewire guid using the tool at [URL]. After that, gtkpod finishes writing the database to the device, and shows all the music which is present, but after ejecting the iPod, no music shows up.
I have a problem related with certificate generation. I had successfully installed openssl. After that I do these.
[root@localhost openssl-1.0.0a]# cd /usr/local/ssl/misc
[root@localhost misc]# ./CA.sh -newca
CA certificate filename (or enter to create)
Making CA certificate ...
Generating a 1024 bit RSA private key
.........++++++
..........++++++
writing new private key to './demoCA/private/./cakey.pem'
Enter PEM pass phrase:
Verifying - Enter PEM pass phrase:
You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank. For some fields there will be a default value,
If you enter '.', the field will be left blank.
Country Name (2 letter code) [GB]:IN
State or Province Name (full name) [Berkshire]:KERALA
Locality Name (eg, city) [Newbury]:KOCHI
Organization Name (eg, company) [My Company Ltd]:squad
Organizational Unit Name (eg, section) []:SUPPORT
Common Name (eg, your name or your server's hostname) []:localhost
Email Address []:jk.r@squadinfotech.com
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:mahhghh
An optional company name []:mca
Using configuration from /etc/pki/tls/openssl.cnf
Enter pass phrase for ./demoCA/private/./cakey.pem:
I am unable to access the ../../CA/newcerts directory
../../CA/newcerts: No such file or directory
Distro:Centos 5.3 kernel 2.6.18
What software can i use to compare its performance when it's compiled with GCC and when compiled with MSVC? I think it should be some mathematical software, so the performance would be very dependent on CPU- and memory-specific optimizations.
View 4 Replies View RelatedI am on a Fedora 12 box, and it's my job to do some custom configs to xorg.conf. To start this, I have to remove a bunch of devices' entries and modify others. We're using the proprietary Nvidia drivers, and they work fine except that something - perhaps the NVIDIA X Server Settings app - keeps modifying the xorg.conf. After I write a change to see if it will work or break the machine, I have to restart the entire computer, as restarting X by itself blanks out the monitor so that I can't even see a virtual console. After the restart, X starts just fine and goes into GNOME, but as soon as I look at the xorg.conf, everything I've removed or commented out from the original, auto-generated file has reappeared. How to stop this infuriating behavior so that I can rewrite xorg.conf and make the changes stick?
View 7 Replies View RelatedI am learning about net filters and I am practicing some sample programs on it. I am very new to this and I have a general query. I got the packet to a desired function using PRE_ROUTING hook. Now how do I frame a packet from this point? I am just trying to simulate a echo client server program in the kernel level using these hooks. Any useful info on sockets in the kernel level?
View 1 Replies View RelatedI did a fresh installation of centos 5.5. I installed KVM. And configured a eth1 for KVM host network and i configured eth0 to be bridged.
When i do service libvirtd reload i get: internal error Bridge generation exceeded max id 256
I own an ipod shuffle and in ubuntu 10.04 worked perfectly, but after upgrading (I did a fresh install) to ubuntu 10.10 rythmbox recognizes the ipod, but it can't list the items and if I try to reload the list, rhythmbox closes irremediably.
View 2 Replies View RelatedMy issue is with linux routing tables using iproute2, coupled with the iptables MARK target. When I create a rule to lookup a table with iproute2, and the routing table routes an address as type unreachable (or blackhole, or prohibit), if a higher priority rule does a lookup to another table that routes the address as type unicast but that higher priority rule also matches on a fwmark, the packet to that address is never generated locally to even go through iptables packet filtering/mangling in order to mark it, because the lower priority rule that doesn't match on a fwmark says it's unreachable. For example, I have 2 rules installed with ip:
Code:
10: from all fwmark 0x1000 lookup routeit
20: from all lookup unreach
ip route list table routeit
[code]....
Now, in the packet filter, I have an iptables rule to mark packets to destination 10.0.0.5 with 0x1000 in the mangle table and OUTPUT chain. When I generate a packet locally to 10.0.0.5, all programs get ENETUNREACH (tested with strace). However, if I take out the route entry that 10.0.0.0/8 is unreachable, it all works fine and the routes in the routeit table get applied to marked packets (I know because my default gateway would not be 1.2.3.4, but wireshark shows packets being sent to the MAC address of 1.2.3.4).
The best I can surmise is that when generating a packet locally, the kernel tests the routing tables in priority order but without any mark to see if it is unreachable/blackhole/prohibit, and doesn't even bother generating the packet and traversing iptables rules to see if it would eventually be marked and thus routed somewhere. Then I assume after that step, it traverses iptables rules, then traverses the routing tables again to find a route. So is there any way around this behavior besides adding fake routes to the routing table (e.g. routing 10.0.0.5 to dev lo in the unreach table in this example)?
Fedora 11 I have tried just about everything in webmin, the current one I am working with is openswan, and I get this error: ipsec newhostkey --configdir /etc/ipsec.d --output /etc/ipsec.secrets ipsec rsasigkey: key pair generation failed: "-8037"
My boss would like to have our employees connect to our linux server, then access their personal computers to work when they are unable to be in the office. Everyone else in the office uses winblows and they are unwilling to try anything else no matter what the benefit. The most important one is the CAD guy, we need him to work on drawings from school or his latest flings house and I am just running out of steam. how to fix this error or radically change my approach, I will try or do anything.
How do I report a bug concerning opensuse 11.3
View 9 Replies View RelatedIs there a way of reporting a bug in reportbug? I was trying to report a bug in another package and everytime I tried to run reportbug, the terminal window would display "Segmentation fault" or if I ran it with the --configure option, a GUI opens up, select Continue, then the screen says "This may take a while...". Well, 20 minutes later, the screen still says "This may take a while" and reportbug is still doing nothing..
View 3 Replies View RelatedWhen trying to file a bugreport on udev reportbug hangsSo I tried changing the package name to libc6 (just to see if there is reportbug issue)I get**Gdk:ERROR:/build/buildd-gtk+2.0_2.24.4-3-i386-ouUeDk/gtk+2.0-2.24.4/gdk/gdkregion-generic.c:1110:miUnionNonO: assertion failed: (y1 < y2)
View 2 Replies View RelatedI've been having problems with pdf files made using latex (dvi->ps->pdf). I found a reported bug in bugzilla by searching the error message and made a comment. The 'problem' is that the bug is filed under evince, but I'm pretty sure it is in ghostscript. Should I file another bug in the ghostscript section, or will the clever people at bugzilla work it out once they get round to this particular bug (it's marked as low priority)?
The bug report can be found here[URL]..The bug is more annoying than anything else, so any advice is welcome.
I want to report a bug in rhythmbox. But apparently, it doesn't use launchpad, it uses Gnome Bug Tracker. But where is this located? I can't find Rhythmbox in bugzilla. Goggling for "gnome bug tracker" doesn't bring up anything useful.
View 2 Replies View Relatedit's not a real bug/error in Ubuntu per se, but i found an error in the spanish language pack of Ubuntu.There were some words that weren't translated right.I was wondering how to report/change that.I actually found it in the Ubuntu 9.10 spanish language pack, so i don't know if it's been fixed for lucid, but i thought it would be good to know either way just in case i find some other translation errors.
View 6 Replies View RelatedIs there a way to report a bug on a launchpad ppa? I see the Bugs section only has search, with no open bugs. Is there another way to report a bug on this system?
View 1 Replies View RelatedIt purports to start and then just disappears. Any way to fix this? I'd report a problem, but...
View 2 Replies View Related
