Software :: Akregator Won't Display New Articles?
Aug 13, 2010
I've been using Akregator as an RSS reader for years and never had a problem until this morning. It will fetch new feeds, in the "Feed" pane it will show that there are unread articles, but if you click on the feed, no unread articles show up in the article pane. I know there have been updates. Also, if I click on "All Feeds" (where there are supposed to be 461 articles) only 15 articles are actually displayed. I don't know what could have caused this. I tried nuking my akregatorrc and the .kde/share/apps/akregator/Archive directory, but it doesn't help. The only thing I changed yesterday was upgrading to the new Flash player. I'm guessing that's irrelevant.FWIW, this is in Slackware64 13.1 using KDE 4.4.3 and Akregator 1.6.3.
View 2 Replies
ADVERTISEMENT
Mar 9, 2010
I have problem with Kontact since KDE 4.3.x (now I'm using 4.4.1). In earlier version (KDE 3) I had summary with calendar, holidays, notes and mail notifications in left column of summary and RSS (Akregator) channels in right column. I can't do the same thing with new Kontact - left column takes all summary window I don't have Akregator plugin in Summary configuration but Akregator is of course installed:
[code]....
View 4 Replies
View Related
Dec 22, 2010
I am running Xandros on an asus netbook. I've been trying out the fluxbox window manager. I'm having trouble getting akregator to start after login. I've been able to edit my ~/.fluxbox/apps file and can get other programs to start up just fine. here is my apps file: I added konqueror and kcalc after akregator just to see if they worked.
Code: [startup] {powermonitor}
[startup] {akgregator}
[startup] {konqueror}
[startup] {kcalc}
[startup] {minimixer}
[startup] {networkmonitor ath0 eth0}
[group]
[app] (.*[tT]erm)
[end]
[app] (konqueror)
[end]
View 1 Replies
View Related
Sep 16, 2010
Running knode with 11.3 and KDE 4.5 (same problem with 4.4) it is
impossible to drag articles into local folders. Indeed there seems no
way of using local folders at all. Is this a bug, or something wrong
with my setup?
View 1 Replies
View Related
Apr 7, 2010
I need some piece of software that follows the requirements below. So here's the scenario:
1. I need some piece of software that will allow me to edit related articles in a wiki-like fashion. I will be the only one editing this "wiki" though.
2. I need to be able to do searches/queries on the wiki content in a very flexible but also very concise way:
- The usual search for an expression in all articles or only some category(ies) but also:
- Wiki links to other wiki pages based on configurable criteria, e.g. articles belonging to some category(ies): I mean something like right-clicking would open a sort of database form to perform a query that would use the said link as expression but would only be run after you'd chosen your other criteria.
- If anyway possible, do the above for any selected text on the page you were watching...
3. Ideally this would be one single application of course. But I'm perfectly alright with coupling two or even more together as long as they do integrate with each other flawlessly.
View 8 Replies
View Related
Apr 16, 2011
I have a fresh install of OpenSUSE 11.4 64bit and I have installed the AMD Display drivers for my Radeon HD 5970. Everything seems to be working quite well. I have a multiple monitor setup (1280x1024 monitor and a 1920x1080 monitor).
I have my primary display set to 1920x1080, however when I try to enable the second display, I get a CRTC error that the display is over the maximum (1920x1920). If I enable both monitors at lower resolutions, there is no problem.
I have done a fair bit of reading and have been unable to determine where this maximum is set, or how to change it. I'd like to be able to run both monitors at their native resolutions.
View 3 Replies
View Related
Dec 26, 2010
When i ssh to server using -X, i always confuse about which display number i should export. It seems to me sometimes the display number has been used by something, so what i can do is only
export DISPLAY=localhost:0 && xclock
export DISPLAY=localhost:1 && xclock
export DISPLAY=localhost:2 && xclock
[code]....
View 1 Replies
View Related
Jan 8, 2010
Hi I am new to ubuntu and am having major problems setting my displays up. my setup is a hd TV to the Left of my pc monitor, i have managed to configure catalyst to let me have a main display with the second display being an extension of the first, the problem is i cannot seem to swap my primary display, at the minute my HDTV has all the taskbars and everything on it while my pc monitor is just a blank background, i would like it so i could start a film playing for my children, then drag it across to the HDTV while i can still use my pc in the background.
View 1 Replies
View Related
Jun 29, 2010
I did not have any /etc/X11/xorg.conf, so I read on these forums that system-config-display would create one for me. I ran system-config-display and it created an xorg.conf. But now my display is all messed up!! So, I deleted the xorg.conf and nothing changed. Why on earth would the display still be messed up if I deleted the file that was causing it?? Does system-config-display change somethign else?
View 14 Replies
View Related
Jan 28, 2010
I am using GeForce 7600 GSNot using the Nvidia X driver message you know... I searched all over, and seen this problem on many searches but no resolve issues.I want to be able to connect my tv, I use to be able to when I first installed Ubuntu and now IdK.
View 3 Replies
View Related
Jun 28, 2011
I have the following scenario that doesn't seem to work normally. I have a windows 7 pc from which I am using putty to connect to my other linux servers (all running redhat 5 and 6). So here is the scenario that works and one that does not work. And I'm trying to figure out the one that does not work. Scenario that works:
From windows 7 (putty) I ssh into Linux_Server_1.
echo $DISPLAY
localhost:10.0
I run xclock and I see it pop up on my windows 7 pc. I am using xming on windows 7 to help me populate the display from linux to windows. One that does not work:
From windows 7 (putty) I ssh into Linux_Server_1. Then from Linux_Server_1 I ssh into Linux_Server_2.
echo $DISPLAY
<no output>
I try to setup $DISPLAY with localhost:10.0 or 0.0 or even my windows 7 pc ip address:0.0 ....etc Then when I try to run xclock I doesn't work.
I get these error messages: Error: Can't open display: <ip of display>
Also as a side note all our Linux servers are sitting on one subnet. My pc is sitting on another subnet. I use vpn to connect to the subnet where the servers sit from my pc.
View 4 Replies
View Related
Dec 1, 2010
I have installed Fedora 14 Security Spin, and want to display all disks & partitions available in a GUI display. How can I achieve that?
View 1 Replies
View Related
Jan 11, 2011
I'm testing HTML5 for the first time, using Firefox (beta) 4.0b8 and SeaMonkey (beta) 2.1b1, and its ignoring some CSS. Specifically, I have problems with the <details> tag. (It is nested in a paragraph...I am using it to provide an in-paragraph definition in hopes it can be toggled.)
Firefox only partly supports <details>. It's not supposed to show anything except the content of <summary>, unless you click on <summary>'s content. Instead, it puts a line break before the content of <details>, splitting the paragraph in two peices (which looks silly), without the "closed/open" functionality.
So I tried using "display:inline" in my CSS, but that gets ignored. Just for fun, I also tried "display:hidden" (also ignored) and "display:none" (obeyed).
SeaMonkey doesn't doesn't do anything special with the content of <display>...but it also ignores the same CSS as Firefox.
The only thing I can do to support semantic design is apply "font-style:italic" to all <details> elements.
Granted, you might ask, "why bother using <details> at all. then?" Well, I would like to have <details> for the browsers that support it, with the "font-style:italic" to degrade the page nicely for those that don't (such as for SeaMonkey).
Does anyone know why "display:inline" and "display:hidden" get ignored?
View 1 Replies
View Related
Jul 20, 2011
I have configured an instance in AWS EC2. I am trying to set the display back so I can run x apps. I login using ssh -xy -i...
export DISPLAY=XXX.XXX.X.XXX:0.0
echo $DISPLAY to verify
xhost +
xhost: unable to open display "XXX.XXX.X.XXX:0.0"
I have commented out nolisten tcp as suggested HERE I have modified /etc/gdm/custom.conf as suggested HERE Actually, the last suggested modifying /etc/gdm/gdm.conf, but that file didn't exist, so I added the line: DisallowTCP=false to /etc/gdm/custom.conf I rebooted, and still I get: xhost: unable to open display "XXX.XXX.X.XXX:0.0"
View 2 Replies
View Related
Aug 20, 2010
I've just installed xterm, ant trying to run it from my windows machine using ssh. I have X11Forwarding yes on /etc/ssh/sshd_config when I use, MobaXterm, np, I can use xterm after I log ssh -X xxx
but when I use Cygwin, and do ssh -X xxx, and then xterm, I have: xterm XT error : Can't open display: xterm: Display is not set
View 3 Replies
View Related
Apr 4, 2011
I have the following problem: syslog is constantly writing to disk, because the kernel spams these messages
Code:
Apr 4 14:14:56 aspire kernel: [138498.252610] display port opened
Apr 4 14:14:56 aspire kernel: [138498.299755] display port closed
Apr 4 14:14:57 aspire kernel: [138499.328206] display port opened
Apr 4 14:14:57 aspire kernel: [138499.371835] display port closed
Apr 4 14:14:58 aspire kernel: [138500.452671] display port opened
[Code]...
View 1 Replies
View Related
Oct 5, 2010
I am a final year student doign Computer systems engineering and just been introduced to linux. While still strugling to catch up with the commands, I am now given an assignment under shell scripting.I seriously am strugling to understand this question, can you please assist me.Here follows the assignment:
Operating Systems III
Some tips
e.g. (test if a file is empty, if it is then display "file is empty" otherwise display
[code]....
View 10 Replies
View Related
Jun 15, 2010
I try to boot my computer, it starts, it starts loading ubuntu. But all i get is this full screen terminal thingy prompting me to log in. So i do, and well. There's still just a terminal. I try writing "Nautilus" and get the error that display cannot be run. I try writing "GKSUDO nautilus" and get the same error, with a little difference.
What should i do?
View 4 Replies
View Related
Mar 1, 2011
I could use UltraVNCViewer from XP Pro and Server 2008 to control the Ubuntu 10.10 desktop. The computer has not been turned off, but when I log in with UltraVNC Viewer, all looks fine but no display. I have a black screen with the mouse cursor I can move with the mouse on the XP computer.
I can still access the mapped drives on the Ubuntu Desktop, there are no errors when connecting, but no display.
View 1 Replies
View Related
Mar 1, 2011
I just installed Ubuntu 10.10 on my PC. When I start the computer, GRUB pops up and I select the top Ubuntu one, but then I don't see any display. I hear the sounds of the login screen, I can login in and continue, but I still don't see anything on the screen, and my monitor goes to sleep.
some specs:
intel Core 2 Duo
1 TB Hard Drive (Windows 7)
500 GB Hard Drive (Ubuntu 10.10)
nvidia GeForce 8400 graphics card
View 7 Replies
View Related
Jun 30, 2010
I've been told to use an old Electron Microscopy program that needs to display in 8-bit.When I install and try to run I get the error
Searching for 8 bit PseudoColor visual ...
Searching for 6-bit PseudoColour visual ...
Searching for 24-bit DirectColor visual ...
No matching visual available.
How do I get Suse 11.2 (my dist.) to show something that has such a requirement? I found something on the web for Mac where they said use xquartz to and quartz-wm but I don't think these work in Suse(?). I also went fooling around on Sax11 and couldn't really find anything.
View 10 Replies
View Related
Oct 17, 2009
I am trying to run a cron job that requires the X server. From the documentation of what I'm trying to do, I see: Code: If it is a cron job, you have to explicitly set DISPLAY to :0 How/where do I do this?
View 3 Replies
View Related
Feb 9, 2010
I just downloaded and installed the ATI proprietary drivers from AMD and when I restarted my computer I don't have a display anymore. I can see the loading screen and then its all black.
I went to another shell (tty2) and removed Xorg and re-installed it and that didn't work either!
View 6 Replies
View Related
Mar 14, 2010
I am going to school for IT Security and will be taking my first Linux class this semester. I have dabbled a little bit in Linux before this but never really had the time to get to involved so I put it off untill now. Now I am forced . Anywho...I just installed Fedora11 (dual booting with Vista home basic) and the first thing that I am trying to tackle is install VMware. I have access to a bunch of Window OS's because of school and would like to create a 'virtual' version of windows for things like iTunes. This way, i have to force myself to use Linux for everything and I can install it on the whole PC. Until then, I am going to dual boot. When I was trying to install VMware, I tried to do it from the Terminal using sudo sh then the file name which is a .bundle file, I typed in the password and it said that my account was not in the 'sudowers' profile or something like that. I read on-line that you can modify who can sudo and who can't in the ect/sudoers file but if has an 'X' at the top right and I can't open it. It says 'Could not display "/etc/Sudoers". I tried to use visudo in the terminal and it says that permission is denied.
View 2 Replies
View Related
Dec 7, 2010
ive done countless google searches and forum searches with all the same results all the time. Is there anyone who can tell me what file to edit in order to display? Ive tried editing the /etc/motd file and no luck. I tried alot of other stuff too.
View 10 Replies
View Related
Sep 1, 2011
The "cal" command returns the current month. The "cal -3" displays the previous, the current and the next month.
How do you make it display the next month only?
View 11 Replies
View Related
Mar 25, 2010
I use Putty from my machine (named host1) to ssh into an OpenSUSE box (named box1) and would like to have a gui to use. I am trying to issue xterm and am getting the following error:
xterm Xt error: Can't open display:
xterm: DISPLAY is not set
View 5 Replies
View Related
Jan 16, 2010
When I start Ubuntu, the Ubuntu logo appears, then the screen goes black and "No Signal" appears on the monitor screen.
Earlier today, I installed a new processor, a dual-channel AMD from a single channel AMD. I decided to put the entire computer into a new case since I was dismantling everything. I have two hard drives: one for Ubuntu and one for Windows XP.
When I started it up, I got errors 13 and 17. I went into the BIOS and changed the disk order. Now Grub appears and I can get into Windows, but I cannot get into Ubuntu.
View 7 Replies
View Related
Mar 20, 2010
I am running Ubuntu 9.10 server and I am trying to get the IP address of the machine to display at boot (before login) but so far no luck. Here is what I have tried: Created a script called displayip:
#!/bin/sh
ifconfig eth0 | grep "inet addr:" | awk -F'inet addr:' '{print $2}'
which is located in the /etc/init.d directory. changed the permissions to make it executable: chmod +x displayip then ran update-rc.d displayip defaults which ran successfully. Upon boot it doesn't show up with anything.
View 1 Replies
View Related
Apr 20, 2010
On Ubuntu (as with 99% of other Linux distros), CTRL-ALT-F7 brings you to your X display on tty7 (:0)...is there any way for me to get the display to appear on tty2 or tty3 instead of 7?
I ask because my ubuntu box is a media server running XBMC. XBMC has some 'flaws'...one of which is screen refreshing during certain tasks (other than watching a video)...the easiest way to get it to kick back into gear is to switch to a terminal, then back to the X display...not that big of a deal really..but the problem lies in the fact that the remote I use for the computer (simple USB IR Remote grabbed off of eBay) has buttons programmed for CTRL-ALT-F[1,2,3,4]. So, if I could get X to appear in CTRL-ALT-F2 for instance, I could easily switch back and forth without having to get up to walk to the keyboard.
View 1 Replies
View Related
