ive done countless google searches and forum searches with all the same results all the time. Is there anyone who can tell me what file to edit in order to display? Ive tried editing the /etc/motd file and no luck. I tried alot of other stuff too.
View 10 RepliesI want to display motd after entering username but before entering password. Is it possible?
View 8 Replies View Related[On Ubuntu 10.10 64-bit]
I have been trying to get rid of the boring motd when ssh-ing into the machine. I have sudo vim-ed the /etc/motd file to no avail.
Even if I add a motd.tail tail file with my content. I still get the boring and verbose:
Quote:
Linux barney 2.6.35-28-generic #49-Ubuntu SMP Tue Mar 1 14:39:03 UTC 2011 x86_64 GNU/Linux
Ubuntu 10.10
Welcome to Ubuntu! * Documentation: [URL]
How do I get rid of this?
I am setting a customized MOTD, however after 24 hrs, it reverts back to the default MOTD.
I noticed that it is a softlink
Code:
cmmiller@ladytron:/etc$ ls -al | grep motd
lrwxrwxrwx 1 root root 13 2009-07-05 10:47 motd -> /var/run/motd
cmmiller@ladytron:/etc$
And I'm making the change to /var/run/motd, however it keeps changing.
I applied some changed to the MOTD in /etc/update-motd (including removing the canonical mention in ./python2.6/dist-packages/landscape/sysinfo/landscapelink.py). After updating the system I found that all my changes had been deleted without any warning. Is there a way around this nonsense?
View 2 Replies View RelatedI am not sure what happened here. I have 10.04.1 and was able to run a command "update-motd". I wasn't able to get it to dynamically create a new motd. My hope was to have it recreate it once a day and email me the MOTD from the server.
In trying to get it to do this, I did a "apt-get install update-motd" in which it proceeded to do this, but then after the installation, I get:
"update-motd: command not found".
What did I do, how can I manually update/create the /var/run/motd file?
how i can put an scipt into the motd file? For example if i want to know how many users are logged on while i log in.
View 1 Replies View RelatedI am trying to change the motd "message of the day" on my Ubuntu server 10.10,
But when i do sudo vi /etc/motd...
i can change the text here, but as soon as I save and exit this file. It changes itself straight back.
I know this is somewhat lame, but I remember back in college the MOTD on some of the systems was a random quote. I always wanted to do that. It seemed really trivial, but still neat and clever.
I searched a bit and don't see anything built-in for CentOS, so I was considering writing a Perl script to parse the RSS feed from a quotes site, then update /etc/motd with a random quote from the feed. This would nearly guarantee I could have this on any distro with identical results. Does anyone know of anything that already exists? Is anyone interested in using a script that I write to have the MOTD updated with random quotes themselves, or am I the only one? I'm perfectly willing to share the result when I'm finished.
I want to automate my System-installation. So i try to make a Script that will generate the /etc/motd. Now i have the Problem that the script has some variables and after the "Hostname, OS, HW, IP" the "stars" are anyware, but not there they should. The most problem is the $OS this string can verry long or verry short be. Fedora release 12 (Constantine) or RedHat 5.4 i can do that after the variables place the "stars" on the write position?
Script
Code:
#!/bin/bash
[code]....
I've just installed ubuntu 10.04 and the message text that shows when you ssh in shows the disk usage of /home.How do I get it to show the disk usage of the entire root / instead? (like it used to on some older version of ubuntu)
View 1 Replies View RelatedI'm running Ubuntu Server 10.10 and noticed that every time I log into the server via ssh it gives details that i don't necessarily want it to show.
Code:
Linux zeus 2.6.35-22-generic-pae #33-Ubuntu SMP Sun Sep 19 22:14:14 UTC 2010 i686 GNU/Linux
Ubuntu 10.10
[code]....
When i tried to log in, i get blank screen on the login page, even the src/configtest.php This can be solved by reverting whatever was edited for the motd option to its original paramater. anyone experienced this before and found a solution? The only reason for me to use php 5.2 is to install roundcube alongside squirrelmail. Using: centos 5.5 32-bit, squirrelmail 1.4.8, php 5.2
View 1 Replies View RelatedI did not have any /etc/X11/xorg.conf, so I read on these forums that system-config-display would create one for me. I ran system-config-display and it created an xorg.conf. But now my display is all messed up!! So, I deleted the xorg.conf and nothing changed. Why on earth would the display still be messed up if I deleted the file that was causing it?? Does system-config-display change somethign else?
View 14 Replies View RelatedI have installed Fedora 14 Security Spin, and want to display all disks & partitions available in a GUI display. How can I achieve that?
View 1 Replies View RelatedI have a fresh install of OpenSUSE 11.4 64bit and I have installed the AMD Display drivers for my Radeon HD 5970. Everything seems to be working quite well. I have a multiple monitor setup (1280x1024 monitor and a 1920x1080 monitor).
I have my primary display set to 1920x1080, however when I try to enable the second display, I get a CRTC error that the display is over the maximum (1920x1920). If I enable both monitors at lower resolutions, there is no problem.
I have done a fair bit of reading and have been unable to determine where this maximum is set, or how to change it. I'd like to be able to run both monitors at their native resolutions.
When i ssh to server using -X, i always confuse about which display number i should export. It seems to me sometimes the display number has been used by something, so what i can do is only
export DISPLAY=localhost:0 && xclock
export DISPLAY=localhost:1 && xclock
export DISPLAY=localhost:2 && xclock
[code]....
Hi I am new to ubuntu and am having major problems setting my displays up. my setup is a hd TV to the Left of my pc monitor, i have managed to configure catalyst to let me have a main display with the second display being an extension of the first, the problem is i cannot seem to swap my primary display, at the minute my HDTV has all the taskbars and everything on it while my pc monitor is just a blank background, i would like it so i could start a film playing for my children, then drag it across to the HDTV while i can still use my pc in the background.
View 1 Replies View RelatedI am using GeForce 7600 GSNot using the Nvidia X driver message you know... I searched all over, and seen this problem on many searches but no resolve issues.I want to be able to connect my tv, I use to be able to when I first installed Ubuntu and now IdK.
View 3 Replies View RelatedI have the following scenario that doesn't seem to work normally. I have a windows 7 pc from which I am using putty to connect to my other linux servers (all running redhat 5 and 6). So here is the scenario that works and one that does not work. And I'm trying to figure out the one that does not work. Scenario that works:
From windows 7 (putty) I ssh into Linux_Server_1.
echo $DISPLAY
localhost:10.0
I run xclock and I see it pop up on my windows 7 pc. I am using xming on windows 7 to help me populate the display from linux to windows. One that does not work:
From windows 7 (putty) I ssh into Linux_Server_1. Then from Linux_Server_1 I ssh into Linux_Server_2.
echo $DISPLAY
<no output>
I try to setup $DISPLAY with localhost:10.0 or 0.0 or even my windows 7 pc ip address:0.0 ....etc Then when I try to run xclock I doesn't work.
I get these error messages: Error: Can't open display: <ip of display>
Also as a side note all our Linux servers are sitting on one subnet. My pc is sitting on another subnet. I use vpn to connect to the subnet where the servers sit from my pc.
I am trying to run a cron job that requires the X server. From the documentation of what I'm trying to do, I see: Code: If it is a cron job, you have to explicitly set DISPLAY to :0 How/where do I do this?
View 3 Replies View RelatedI just downloaded and installed the ATI proprietary drivers from AMD and when I restarted my computer I don't have a display anymore. I can see the loading screen and then its all black.
I went to another shell (tty2) and removed Xorg and re-installed it and that didn't work either!
I am going to school for IT Security and will be taking my first Linux class this semester. I have dabbled a little bit in Linux before this but never really had the time to get to involved so I put it off untill now. Now I am forced . Anywho...I just installed Fedora11 (dual booting with Vista home basic) and the first thing that I am trying to tackle is install VMware. I have access to a bunch of Window OS's because of school and would like to create a 'virtual' version of windows for things like iTunes. This way, i have to force myself to use Linux for everything and I can install it on the whole PC. Until then, I am going to dual boot. When I was trying to install VMware, I tried to do it from the Terminal using sudo sh then the file name which is a .bundle file, I typed in the password and it said that my account was not in the 'sudowers' profile or something like that. I read on-line that you can modify who can sudo and who can't in the ect/sudoers file but if has an 'X' at the top right and I can't open it. It says 'Could not display "/etc/Sudoers". I tried to use visudo in the terminal and it says that permission is denied.
View 2 Replies View RelatedThe "cal" command returns the current month. The "cal -3" displays the previous, the current and the next month.
How do you make it display the next month only?
I'm running Fedora 9, and I've just started getting a problem (it was working the other day), where if I type
sudo su -
then any program which uses X gives an error about not being able to open the display.
For instance:
# gnome-terminal
No protocol specified
cannot open display: Run 'gnome-terminal --help' to see a full list of available command line options.
I've checked the value of $DISPLAY, and it's :0.0, (which is what it should be, and what my non-root user has as $DISPLAY).
I've also noticed, I can "ssh -Y" from my non-user account into root@localhost, and the display works!
I update system today. Just before , everything is normal. Once it finished , I found that my KDE can't display some characters. I am a Chinese user. The English words are normal,. Just some Chinese characters can't be displayed. When I refreshed the browser, they can be displayed again but some of them are font default and some of them are font Yahei. And they are displayed messed together. It is not pretty. AND it is not only in browser, anywhere displayed Chinese characters looks the same as browser. How to change them back to default font as one font not two types of font messed together?
View 1 Replies View RelatedUpgraded to Fedora 11 and my display aspect ratio is now broken. I have a 23" Acer screen, but in Gnome its auto detecting as a 20" Acer display and the aspect ratio is wrong and the display grainy. I read the FAQs and am trying out some suggestions. Created an xorg.conf file in the correct place, contains the correct monitor settings but my display is still broken. Q. How do I force the kernel to read the xorg.conf file ?(PS: I'm kind of a newbie, have only come back to linux after a few years of using Windows)
View 5 Replies View RelatedI'm running PyMOL version 1.2r2 on Fedora 12 with python2.6.
Only for a second or two will molecular models display correctly in the PyMOL viewer, and then the image becomes distorted. As I rotate the model, it displays correctly, but then almost immediately after I stop moving the model, it becomes distorted again.
The attached images show the display before and after the distortion.
This is some of the information that the PyMol program prints as it loads.
Quote:
Every other time my system comes out of hibernation, I see the blue Fedora screen loading like the computer is powering back on, and all of the sudden the screen goes blank, as if it shut itself back off. The funny thing is the power button is still on, but there is no display. Has anyone heard of this issue before. I'm not sure what to try to get it fixed
View 1 Replies View RelatedI want to change the default behavior of my display hotkey combo (Fn+F7). I can do this in KDE, but in Gnome, the gnome-settings-daemon cycles through the options. Problem is, the option I want is not there. I want the laptop display on the right and the external display on the left. I know how to use xrandr to change this or to use System > Preferences > Display, but I want to use my hotkey combo. I see two ways to do this. Find the configuration file that selects the options that are cycled and manually edit it, or disable this hotkey combo for the gnome-settings-daemon and use my own script in /etc/acpi/actions, etc/acpi/events for the hotkey combo. Currently the gnome-settings-daemon intercepts the hotkey combo, so I can't use my own script. Anyone know anything about this, or do I need to file a bug report?
[Code]...