I just fully installed slack 13.37 on my laptop. I was trying to use minicom. But after I typed the command line 'minicom -s' or 'minicom', I did not get the minicom window, the curson stop at the console and never return back until I kill the minicom process.
View 13 RepliesWell, upto now i have been using minicom on linux platform.Can any one tell me whether minicom is meant only for linux or is it platform independent?Actually i'm connecting 2 PC's using RS-232 and then passing and viewing the messages using minicom. Both the PC's use Fedora11. Now suppose i want to do the same thing between 2 pc's where one uses linux and other uses windows. So, if minicom is meant only for linux then how to do this?Can some one also suggest some useful links or tutorials regarding this serial communication between to different OS?
View 1 Replies View RelatedI have a netbook which has no serial port. However I use my netbook to connect to Cisco network devices via serial to USB converter. I installed Minicom on my netbook and I don't know how I can tell Minicom to use my USB port rather than default to /dev/ttyS0.
Can anyone tell me how I can change or point Minicom to use my USB port so my serial to USB will work?
i am using eUploader in windows and there is a auto test facility where we can run scripts .Is there a auto test facility in minicom,where after establishing the connection i can run a script?
View 3 Replies View RelatedI have followed the instructions at http://www.vcn.bc.ca/~dugan/setting-up-slackware.html (under "Making Firefox Perfect"), but I still get the error message"Firefox doesn't know how to open this address, because the protocol (rtsp) isn't associated with any program."
View 13 Replies View RelatedI am working on serial communication program its working but when I am giving some input in replay minicom giving junk value.
View 1 Replies View RelatedI have a Sun V120 server, and I connected to it via minicom from a linux machine. The problem is that when I connect, immeadiatly starts to receive the letter m as a command and it returns "Unrecognized command", so it is impossible to configure anything ot to give any command whatsoever. Also, sometimes receives all kind of letters, dots and characters, resulting the same and blocking my keyboard. When I connect from a Windows machine via HyperTerminal all is fine.
View 3 Replies View RelatedInitially i wrongly entered the serial port device as ttys0 and save it. It wont reply due to wrong device selection. Actual device is ttyS0 and i select this and try to save it as dfl,but an message appear as 'cannot write to /etc/minicom/minirc.dfl'
So i have to configure each and every time i open the minicom. how to configure this correctly?
I have setup CentOS as server and Fedora as Client.Now I want to transfer file from server to client through minicom.How to do that?I tried sending file from CentOs and it does have a ASCII format file transfer option while on the other OS only few like xmodem , ymodem and zmodem type of file transfer was present.
View 2 Replies View Relatedis there a way to move the cursor upward in Minicom when connected to another machine ?
I have an embedded system connected to the PC via null-modem. The embedded machine is to "redraw" the screen on the PC every second. Right now it sends the Form Feed command (0Ch) and sends the screen data down to the end of the page. The flow in detail as seen from the embedded sytem:
1) send FF (0Ch)
2) send text "blah blah one two and so on .."
3) goto step 1
This approach works but the minicom screen on the PC flickers due to the Form Feed command. So I need to find a way to move the cursor up (like a reverse vertical tabulation) to the upper left corner of the screen without using the Form Feed command. In a HOWTO I found something like "vertical coupling" that may be used for such cases, but no more hints than that.
I recently ordered the Alienware Aurora from Dell and upgraded the video card to the Nvidia GeForce GTX 295 as I noticed that Nvidia offers a 32-bit driver for download.
Then I noticed that the system comes with Windows 7 64-bit so I am assuming that this is a 64-bit system.
My bottom line question is will I have to install Slackware 13 (64 bit) or will I have to stick with the 32-bit version since the Nvidia driver is compiled for 32-bit? This is a gaming machine so obviously I want to be able to realize the full potential of the video card.
If I have a choice, what are the pros and cons? I DO NOT want Windows so I'll be disappointed if I can't install Linux!
Below is my order list from Dell:
Code:
I do have trouble in configuring my wireless network,though i configured it as what Alien BOB say(http://alien.slackbook.org/dokuwiki/...ckware:network) and google some similar Threads.My latop is Asus F83vf, wireless card is Atheros AR9285 Wireless Network Adapter.
The code when I run lspci command is code...
I have a usb serial adapter and was happily using minicom with it under openSUSE 11.2. I've upgraded to openSUSE 11.3 and I can only use minicom with this serial adapter as root. I had previously had problems writing to /var/lock under openSUSE 11.2 which I worked around by changing the minicom config to use /tmp as its lock file location.
Unfortunately my laptop doesn't have a built in serial port so I can't tell if its a general problem or something specific to the /dev/ttyUSB0 device. This is the output I get when I run minicom with my regular user account. I get the same output whether the lock file location is set to /tmp or /var/lock
Code:minicom usb0 Device /dev/ttyUSB0 lock failed: Permission denied. Before I started tinkering my user belonged to the following groups groups=16(dialout),33(video),100(users) I've since added 5(tty),14(uucp),21(console) but still no joy.
I installed Fedora 12 in my PC and after that when I tried to use minicom it was not installed. I tried copying the executable of minicom in /usr/bin from another PC and tried using it. But, I was not able to enter any commands in minicom..
View 1 Replies View RelatedI am trying to access an OpenBSD system that I have just installed via my PcBSD system by the use of a serial cable. I have been trying both minicom and cu but I am obviously doing something wrong... cu -l /dev/cuad0 returns /var/spool/lock/LCK...cuad0 Permission Denied. Can't Open lock file. all ports busy. And when I try to connect through minicom I either get a similar lock error, or minicom will sit at the connection screen with (offline status). I feel like the answer to my problems is a rather simple one, but I do not know where else to look for information.
View 3 Replies View RelatedI am working on a embedded target board which runs on linux. The target board is connected to a linux machine through serial port. To bootup the target board, I run the minicom in the linux machine, boot the kernal of the target board through giving the boot command through the serial console (minicom). Now the question is when the target board boots up, it doesn't starts a shell. The rc scripts are getting executed. There are target specific applications getting started from the rc scripts. I appended & to the last launched application. Still I don't get shell prompt.
View 2 Replies View RelatedI'm new to fedora and also new to Linux too. I'm using lenovo SL410 which is not provisioned for serial port. Now I want to configure cisco router via serial-usb (Z-TEK) converter, for that I have installed minicom and still I'm not able to connect to router. Do I need to install driver for converter that I'm using?
View 2 Replies View RelatedHere's the setup: One x86 server (Red Hat 4) with two serial connections to an embedded linux device. One serial connection is to a power control so the device can the restarted, and the other is used for a console to this device. Both serial connections use minicom. People on my team VNC to the x86 server, where they find the two minicom sessions waiting for them as they are left open. I would like to automate connecting to the server and communicating over the serial lines.
Supposing I use ssh to the x86 server, could minicom be used over the serial lines without terminating the minicom processes seen through VNC? If not, is there a way to re-open those windows from within the ssh session, so a user who VNCs to the server won't have to reopen them? Could a single ssh connection control two minicom terminals simultaneously, or would there need to be two ssh connections? It is assumed a user and the automated process will *not* try to access the device at the same time; the automation would trigger during off hours.
I picked up two free Sunfires a couple of days ago (Sunfire V210 and Sunfire V240). Obviously, these are RISC machines, so no video, mouse, or keyboard ports. The only way of connecting to them that I know of is through the ALOM interface. I was hoping to use the minicom program that's on my Linux (Slackware 13.1) box to do this. I connected an RJ-45 straight through cable to the serial management port on the Sunfire V240, connected the other end to a Sun 530-3100-01 RJ45 to DB9 adapter, and then plugged the female end of the adapter into the serial port on the Linux box. I set the minicom port settings to the following:
A - Serial Device: /dev/ttyS0
B - Lockfile Location: /var/lock
C - Callin Program:
D - Callout Program:
E - Bps/Par/Bits: 9600 8N1
F - Hardware Flow Control: Yes
G - Software Flow Control: No
...and relaunched minicom hoping that it would connect. It does not. It just sits there with a blinking cursor and an "Offline" status.I also attempted to use cu to connect to the Sunfire using the following:# cu -l /dev/ttyS0 -s 9600.I just get the "Connected" message. No prompt, no anything. It just sits there. Same situation on the Sunfire V210.
I am writing an expect script that will automate flashing an embedded device through minicom using a serial connection and am running into problems sending backspaces.The script catches the configuration prompt on startup and can flash the device, but setting the MAC addresses in the fconfig are being problematic.For example, when I run the script, I can set the variables that are defaults by just pressing enter or enter new directives when prompted.. the problem arrises when I need to enter a new MAC address and there is already one set - I need to overwrite it somehow.
If I manually go through fconfig using minicom (minicom version 2.3 (compiled Dec 3 2008)), I can use backspace on my keyboard to remove the old MAC address and enter a new one - no problem.. but with expect.. I am having issues.I tried sending , ^H,10 177. These do not work. Minicom has BS set for the backspace key though.I tried setting it to DEL - no luck.On the other hand, I can send control-C with send "send 03".
I have a router with linux firmware and attached to it a USB modem with which I can do both data and voice.Any other command send through echo method works ok. I was able to send SMS, edit phonebook and many many other stuff, but not make a call.So what is different from sending the call command within Minicom 2.5 and echo it?
View 1 Replies View Relateddo you know any serial comm application other than minicom and cutecom that can send binary files?
View 2 Replies View RelatedI was trying to connect my android phone just to send some AT commands using Minicom or Seyon. But I was not able to connect it. I have connected my phone using a USB cable.Do I need to connect my phone through the serial cable by using a minicom connector to be able to send the commands to the phone.Also when I launch it says Initializing Modem...thenModem at /dev/ttyS0 is available. If I try to Dial it says Warning related to the Baud rate.But After that I am not able to do anything.
View 7 Replies View RelatedMinicom was running fine two days ago capturing data from a gage device via a serial cable. Yesterday, users of the data started complaining that they were not receiving any data.
The minicom status line reads offline. Is this part of the problem or is this normal (I never really noticed it before.) All settings on the gage device match the minicom settings.
I use Minicom on the recenet Ubunto Linux and have a single USB 2 serial device and my Minicom doesn't have 57600 for selection.
View 7 Replies View RelatedI am running kubuntu 9.04. I have minicom, Gtkterm and Putty installed. minicom seems to be really good, but I am missing scroll back functionality on there. Either that or I'm a novice with it and don't know how to do it. Putty is a GREAT app. But what I'm finding is that after the terminal runs for a bit, the screen shows characters from the previous lines and goofs up the output. If I move the window, the gibirish disappears. gtkterm is adding several empty lines to any of the screen output.
View 2 Replies View RelatedI am using a Prolific pl2303 USB<=>Serial adapter. dmesg reports everything seems ok when I plug it in (see below) but when I open the ttyUSB0 port in minicom, it is always offline and nothing works. Also, minicom reports:
[code]....
If I plug the adapter into a different machine (Windows) everything works fine. The serial port is setup correctly (9600-8-N-1) What can I do to get this working?
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
pl2303 5-2:1.0: pl2303 converter detected
usb 5-2: pl2303 converter now attached to ttyUSB0
usb 5-2: New USB device found, idVendor=067b, idProduct=2303
[Code]....
I know, I know, this discussion this question is not asked for the first time but it doesn't work. I even reinstalled my Slackware on my netbook. lilo.conf: append="vt.default_utf8=1" /etc/profile.d/lang.sh: LANG=de_DE.utf8 (is shown in the output of locale -a) I did not put my configs in my home folder; everything is new cerated. Now, when I create a file
[Code]..
I want to download the Slackware 13.1 ISO to my Windows system and create a DVD or CDs to install on a separate Linux system (that system currently has Slackware 12.1.0). I went to the php page and clicked on the link, but all I got was a file that's only 26.3 KB. Seems like an ISO image should be a lot bigger than that.Is there something else I need to download first? Will this even work? How should I download the ISOs?Am I missing something?
View 9 Replies View RelatedI recently installed Slackware 13.37 and every time I start X the lights on my monitor flash on and off and my monitor goes black and does not come back. I tried most of the window environments (X, Cholesterol-free, etc) and I'm running out of ideas.
View 14 Replies View Related