i have a problem........ How to redirect local http port to remote ip ddress(192.168.10.64) using iptables..my destro is Centos 5.3 my rule is this iptables -t nat -A PREROUTING -s 0/0 -d <my local ip> -p tcp --dport 80 -j DNAT --to-destination 192.168.10.64
View 1 RepliesI have had a look at the the information on the ubuntu forum about this but am having trouble getting the server to do what i want it to do.
I have a VPS running ubuntu 9.10 and i am trying to set it up to redirect port 25 to a remote machine via a VPN connection (remote machine connected via VPN)
i have tried setting this up in the firewall using webmin but it is not working.
I need to redirect all http/https/ftp traffic through the remote proxy, but when I changes connection settings in browser or in System->Preferences->Network Proxy it doesn't work well: instead of getting page content browser asks for saving some short (8 bytes) file with the same content for all requested pages. It happens in Chrome/Opera/Firefox. This proxy requires authorization and works on computer with Windos XP. It worked well when I was using Windows 7 and Proxifier, now I have Ubuntu 9.10 with all available updates.
View 3 Replies View RelatedThe issue is that my CentOS workstation is in a vlan from where the Intranet's DNS servers are unreachable. For browsing the web there is an ISA proxy server, which I presume resolves DNS for my firefox. However, wget, host, ping and aria2c fail to get any sort of DNS resolution since they're being run from command line.I have exported HTTP_PROXY value, which provides me internet access on console, but,only when I connect using IP address. It fails on name resolution.
My question is:May I redirect the DNS queries to my home PC which would be running a DNS server on a non standard port?I was thinking of putting nameserver 127.0.0.1 in /etc/resolv.conf and then put iptables rule to redirect 127.0.0.1:53 UDP to a.public.ip.address:3535 UDP..I don't know if I am shooting blanks or what, I am not very much aware of this kind of setup.My main need is to provide DNS resolution to console apps.I want to utilize my company's idle bandwidth for bulk downloads, so, using proxy, SSH tunneling through my Home PC is out of question.
How to forward local HTTP requests to remote Proxy with IPTables ?
View 1 Replies View Related* a router/gateway. The external interface have the public IP, an other the DMZ, a third the internal room* a DMZ with the web server* an internal network (internet public room)I redirect the http port 80 to the web server. You should see him there.But I can't see this web site from the internal room. From the public IP /URL I have some sort of non existent message (sorry forgot to copy it). If I call for the private IP, I get the home page (but not the CSS files)the gateway nat's the networks.What is the trick to see the web site from the internal network?
View 4 Replies View RelatedI have a reverse ssh connection established from a remote machine to my local machine - it is established with autossh from the remote machine - I know it is connecting because I can see the two ssh processes on the local machine - and, when I kill the two ssh processes, two new ssh processes are immediately established. But I cannot login to the port on the local machine. I have tried everything - it simply refuses to connect. This remote machine is miles away and not readily accessible.
Code:
ssh -p 7766 -vvv user[at_sign]192.168.1.108
OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
[Code]...
I'm wondering if there is some way I could utilize netcat or socat to "tap into" this connection from my local machine??? (My ultimate goal would be to get to a shell on the remote machine.)
I'm doing some commands on a remote server (using ssh to log on to the remote server, did a ssh key swap), how do i redirect the output of a command back to the local server ?the person who helps me out is my HERO i'm really stuck on this and it would bring me a lot further if i get this to work
View 14 Replies View RelatedI want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
My poblem: At work I have a proxy with some closed ports. I need to connect to an Oracle DB on some DB_IP at port 1521. DB_IP is a public IP. What I Have: At home, I have a Linux machine and a Linksys WRT54G Router. What I need: How can I do to communicate a PC at work with DB_IP:1521?
View 1 Replies View RelatedI have a server that is on a high port number, and people want it on port 80. For root exploit issues people say the server can not run as root. So to solve things I want to redirect port 80 to a high port number, say 12345 on the machine. This has been discussed all over the web, so I find I need to do this:
/sbin/iptables -t nat -A PREROUTING -p tcp -d 123.45.67.89 --dport 80 -j REDIRECT --to-ports 12345
/sbin/iptables-save > /etc/sysconfig/iptables
And I do this, an voila things work for the whole world. All machines in the world can see the server on port 80 on the machine.Except, on the machine itself. On the machine 123.45.67.89, I try to get to the server on 123.45.67.89:80, I get a can't connect error. On the machine if I try 123.45.67.89:12345 I can connect.What am I doing wrong here? I don't want localhost network really, I want the ip address and port, but I want the forwarding to work on the local machine. But it doesn't...
Is there any way to redirect a remote Linux machine mplayer output audio to local one?
View 2 Replies View RelatedI am trying to show library content (asp files, IIS server, MySQL database on Windows Server 2003 - Inetpub/wwwroot/library - 192.168.0.3) publicly. But Apache webserver is on Linux machine. In one of previos topics I was adviced to mount this remote machine webfolder into Linux /var/www. Well this way it want work. I was adviced it can be done through redirecting.
View 14 Replies View RelatedHi,
In squid i have blocked some sites like facebook and ......I want to know is there any way when user type in his browser like www.facebook.com instead it show something like following it automatically redirect to www.google.com
Error
The requested URL could not be retrieved
The following error was encountered:
Access Denied.
Basically I want to redirect the http request so the user should not see the page not found error but www.google.com page may open automatically.
thanks
garden
How do you transfer a file from a local Mac to a remote Linux machine
View 5 Replies View RelatedI have a Ubuntu server hosted on Amazon EC2. I need to create an automated backup scheme so I created another Ubuntu instance on my local network which is hosted in a virtual environment. I managed to transfer the necessary files between 2 machines on the same network using the rsync command:
rsync -azvv -e ssh /home/path/folder1/ remoteuser@remotehost.remotedomain:/home/path/folder2
How can I do the same thing but transferring files from my Amazon server to my local server? Is there a way I can achieve this with port forwarding, or by VPN, or anything else? It doesn't have to be rsync. If you know about a better method, kindly let me know.
I recently purchased a linux VPS from [URL] just to learn and play around with. I currently ssh into the machine via Putty from various Windows boxes. Is there anyway to throw some mp3s on the remote server and then have them play locally? Server is currently running Ubuntu Server 10.04.1.
View 4 Replies View RelatedI am having trouble to make my SSH server working with remote machine.
Code:
telnet 192.168.1.102 22
PHP Code:
[Code].....
For the life of me I can not figure out what I am doing wrong with scp to copy a directory and its contents from a remote machine to my local host. I have no issues with getting a single file but would like to just save time and get the whole folder in one command.
Here is what I have tried:
scp user AT remoteMachine:/home/username/folderIwant user AT localMachine:/folderIwant this gives me a permission denied error and try again and received disconnect from localHost to many authentication failures
scp user AT remoteMachine:home/username/folderIwant . says can not find file or folder
I am sure this is something easy that I cant remember, and searches gives me local to remote not remote to local and trying to make the local to remote suggestions I read to work remote to local have not worked.
I have "Server A" with real internet ip 1.2.3.4 (eth0) and lan ip 192.168.1.1 (eth1) There's also "Server B" with lan ip 192.168.1.2 (eth0), I'm running an Apache Web server on "Server B", so I want to redirect all traffic from IP 1.2.3.4 port 80 (Server A) to 192.168.1.2 port 80 (Server B), using the following rule:
[Code]....
iptables -t nat -A PREROUTING -p tcp -d 1.2.3.4 --dport 80 -j DNAT --to 192.168.1.2:80 This actually works pretty good, from internet I can browse ttp://1.2.3.4 But the problem is that if I check the Apache logs, all incoming connections seems to come from 192.168.1.1 instead of showing the real source ip addresses (internet ip's) so this is screwing up all my web stats, I've been looking for hours and hours on how to make a transparent redirect, but can't find any info, I know there must be a way because my old WRT54G router which uses iptables could do it.
When I use the following command:
ssh user@ssh_server -L 5500:localhost:5500 -p 22
everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:
ssh user@ssh_server -R 5500:localhost:5500 -p 22
I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...
My network isPC1 -- (NIC1,10.1.1.x) Linux (NIC2,10.1.2.x) -- Server 1 (HTTP/FTP)My question isIn the linux system, can I change the PC1 source port from 20000 to 30000? for examplePC1(sport:20000,dport:80)---Linux-- (sport:30000,dport:80)--- Server 1 (HTTP/FTP)
View 2 Replies View RelatedI have a bit of a strange scenario. I have a machine with a fixed IP (192.168.0.108), running Linux. It has an external IP 99.99.99.8 via a 1:1 NAT on a Cisco ASA/router. Port 3389 (MS RDP) is open for 99.99.99.8. I want my Linux machine to listen on port 3389 and redirect all traffic to that port to a Windows machine (192.168.0.100). In this way, my Linux box is able to respond to requests on all ports, but port 99.99.99.8:3389 connects to Remote desktop on the Windows PC. I do not have access to the Cisco NAT config. I was able to get this setup to work by using an SSH tunnel.
I ran this command on the linux box:
ssh -L 3389:192.168.0.100:3389 ergosteur@192.168.0.108
Any ideas? Perhaps using iptables or something?
How can i redirect data received on a port to another port located in a different machine? Can i do this using IPTABLES ?
View 4 Replies View RelatedI'm trying to workaround a limitation in a server application. The limitation is that I can only connect to a LOCAL mysql database. I am trying to fool the server in to using a remote mysql database. I was hoping to do this by simply forwarding 3306 to another server on the same subnet.To that end I've set up iptables rules to forward all connections to port 3306 to a non-standard mysql port on a remote server. This works, except that I need to deal with the loopback interface in a special way and I'm stuck.
View 14 Replies View RelatedI have to retrieve a http request from a particular port using libcurl. I'm using localhost .I am done with retrieving http request using socket programming. how to start integration of libcurl in simple socket programming code.
View 1 Replies View RelatedI'd love a hint or two on the following problem. I've set up iptables rules to forward all connections to port 3306 to a non-standard mysql port on a remote server. This works, except that I need to deal with the loopback interface in a special way and I'm stuck.
Code:
iptables -t nat -A PREROUTING -p tcp --dport 3306 -j DNAT --to 128.XXX.XXX.XXX:3197
iptables -A FORWARD -p tcp -d 128.XXX.XXX.XXX --dport 3197 -j ACCEPT
iptables -t nat -A POSTROUTING -j MASQUERADE
Since locally-generated packets will never hit the PREROUTING rule, you'll need to setup a near identical rule using OUTPUT to make it work. Here is what I've tried:
[Code]...
Have done a bit of Googling around this but got totally swamped so will try here. Basically we are running a CentOS server which hosts a number of virtual hosts under Apache. Recently I needed to set up a development environment for another site using Ubuntu and have this running and accessible on the LAN from a VMWare image. I'm using bridged networking so the VMWare machine has its own IP on the LAN subnet.
I've set up a DNS to point to the external IP of the physical host but can't figure out how to route traffic requested on this domain to the VMWare host. I've basically tried two approaches (configuring a proxy web server and reverse proxy in an httpd.conf file and mucking around with iptables forwarding rules but without success.
Ideally I'd like somesite.somewhere.com to point to the VMWare IP but I could live with a custom port on the end if thats whats required.
To throw further complication into the mix I need reliable communication between the VMWare machine and external mail relay servers in order to debug any issues with mail bouncebacks, embargos etc.
Any idea what's the easiest way to accomplish this?
Some time yesterday, I lost the ability to ssh my remote server, or even visit any webpages it hosts.
I've explored hosts.deny, /var/log/secure and even turned iptables off to see if it would fix anything. To no avail. Here's what my ssh login attempt looks like:
Quote:
localhost ~ $ ssh -vv x.x.x.x
OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
[Code]....
I have an apache server running on my ubuntu machine. I can view them using my local ip (192.168.1.6):80/. And my friends can view the things hosted on my server using my external ip (example http://123.123.123.123:80) but when a friend links back to me to show me what they are looking at and share the moment, I can't view the link, it simply redirects to my router login page.
I had an older linksys router and this could work fine. I could click on the links with my external IP and it routes back to my server for viewing.
Remember to note that I am on the machine that has the server, and I'd like to be redirected out and back to it so we can share pictures back and fourth without me having to replace the external IP address with my local one just to view that link in the browser.