sure you've noticed while installing slackware 13 you are prompt to create a usb boot stick...
I was not able to create one in case my slackware won't boot after installing windows...
My question is how to create a usb boot stick or recovery boot stick so that a can su lilo back to its configuration, so that I can select windows or linux on loader prompt(lilo)...?
Is it possible to use usb startup disk creator to create an upgradable usb disk from the ubuntu live cd? There is information available on customizing the live cd, but it would be much better to boot from a usb stick and use apt-get to keep it up-to-date. My iMac will boot from a usb stick with an mbr installed and using the plop boot manager (won't work with refit), but any changes won't be persistent. Creating a file to hold changes won't help either because synaptic doesn't recognize it; besides I need more space for the package cache than fits into my RAM. And the maximum size for the storage file is 4 GB which still uses less than the available space (8 GB) on my stick. Can I tweak the filesystem on the stick to make changes persistent and use all the disk space? It is possible to install directly onto the stick, but this means it will be recognized as an external disk, and the iMac won't boot from it. Also, such an install is terribly slow.
View 4 Replies View RelatedThis question has been raised several times I am sure but...
I would like to create a FULL recovery CD/DVD of my system with a boot restore...
Any recommended for Ubuntu 10LTE Server.
After using slackpkg to update to -current on a new slack(32) install I was greeted with kernel panic "can't mount root fs" on reboot.
It was looking in the wrong place. I thought I answered yes and slackpkg would run lilo for me when it was done with the upgrade but perhaps I misunderstood.
I had my handy dandy USB boot stick so I set the bios and booted from USB. OK fine, I pointed to the correct location (hda1) and voila.
a 64bit kernel... The machine in question is a 2004 vintage celeron notebook
To my question: Is there a way I can point the loader to another kernel?
One last piece of the puzzle, the dvd drive is bad and I don't (yet) have a PXE server or even another linux box.
I'm getting a netbook with no cd/dvd drive but it boots off of usb, so I've made a slackware 13 usb stick to start the install. I also have a usb hard drive I was going to copy the packages to. I'm wondering... should I boot with the usb install stick and then connect the usb hard drive afterwards?
View 4 Replies View RelatedIm sure that this issue is pretty old and you get some results from forums when you google it, but I cant seem to find the solution : When I boot my system ( its duel boot , win7 / Slackware 13.1 ) the message : L 99 99 99 pops up. I know this has to do with the MBR, When I looked online this is what people were told to do:
[Code]///
I am trying to recover my compaq vista after a BSOD error. I have Ubuntu running and can see both my main hard drive and the factory image. I am trying to create a recovery disc that will allow me to boot back into windows.
View 1 Replies View RelatedIf I try to create a bootable USB stick by using dd to copy an ISO file to it, it usually works on PC but it won't appear in the boot menu of my Macbook. Is there an easy way to generate a bootable USB stick from an ISO file so that it would boot on a Mac?
View 3 Replies View RelatedThe goal woulb de to have a USB stick, bootable on any system, containing a local webserver to host various offline versions of websites. This stick can then be used to show demos of websites to people, even if they don't have an internet connection.
View 1 Replies View RelatedRunning: Ubuntu 9.04 32 bits I'm trying to create an bootable usb drive for installing windows 7 so i took this release"Microsoft.Windows.7.Enterprise.x64.Integrated.Oct ober.2010-BIE"
1. Extracted to get the iso
2. Formated my 8gb usb flash drive with gparted
3. Extracted all the files from the iso with UNetbootin to my usb stick
4. Restarted and selected boot from removable drive in the bios options
After step 4 nothing worked i tried to remove booting from the hdd to force the computer to boot from the usb drive but just get the message that i need to insert an bootable media or restart.
Tried several times and the usb worked propperly while installing ubuntu 9.04 which I run this writing moment. I'm out of ideas and I don't have an cd/dvd reader to boot an dvd from either so via usb is the only thing my knowledge is capable to.
I'm about to install Ubuntu Netbook Remix and my Acer machine has a recovery partition at the beginning of the drive. I've created the eRecovery discs but those will only restore XP - not the actual recovery partition (which I'd like to have in case I sell the laptop later etc).
How can I backup the actual recovery partition, and keep its boot file intact. Then how can I restore this partition at a later time?
is there a way to create a system restore disk or recovery partition ? somewhat like windows has. I do back up my files regularly but a back up of entire os system and settings would be handy.running ubuntu 10.10
View 2 Replies View RelatedI downloaded openSUSE 11.3 to my MacBookPro, whose disk drive has been broken for some time now. I want to install to new msi cr610 laptop that shipped WITHOUT windows. I could order the box with an install disk and printed manual, but if there's any way of creating a bootable USB stick from the download I did to my mac, that would be great.
View 3 Replies View RelatedI'm trying to install Ubuntu 10.04 on my netbook, but I can't figure out how to create a bootable USB stick form my current computer, running Mac OS X.
View 5 Replies View RelatedI'm new here, an Ubuntu user who would try Opensuse for a while. That is if I'm able to launch the thing !
I'd like to create a Live Usb Stick to test it and install it if I like it but it doesn't seem to work.
I tried the website method, using "Win32DiskImager.exe" but the program doesn't work for me (WinXP) : it looks like it's writing but when the "Done" message is prompted, I'm unable to access the usb key, Windows says it's not formatted. That doesn't look right...
I tried with LinuxLive Usb Creator but the boot process fails and Universal-Usb-Installer doesn't offer an Opensuse option.
Is there another way to install the distribution on an USB stick ? I could still try through Ubuntu but that would be quite surrealistic.
But I can't install it on my netbook. I tried to create a usb stick with unetbootin from PartedMagic 5.6 and Sabayon but the install process crash near the end. Testing the disk I obtain the result that there is a file error. I tried to download again, but I have the same error. I create the startup usb stick with the Ubuntu utility, but at boot time it say "Unknown keyword in configuration file". I have a Fujitsu-Siemens Amilo Mini Ui 3520.
View 6 Replies View Relatedanyone knowledgeable could follow this thread? [URL]
View 1 Replies View RelatedI have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
View 4 Replies View RelatedI've put openSUSE several times in USB flash drives. I've used the old method with dd ... and the new one with dd_rescue ..., shown in SDB:Live USB stick - openSUSE This way a partition is created (sdb1 or sdc1 or ...), with the Linux file system (ID: 83). One of the problems of this system is that all the data of the pendrive is deleted. Another problem is that sometimes openSUSE doesn't load completely and I cannot use it. And another of the problems is that even if I create another partition (for example to make the Live USB persistent and "remember" the configuration of my computer) and I put some of my photos, songs, films there when I plug the pendrive in a computer running Windows XP I cannot access the data. (What about Vista and 7?)
Other Linux distros can be put in pendrives using the FAT file system (for example W95 FAT32 (LBA), ID: c). This way my personal data or files (photos, documents, ...) can be opened from a computer running Windows XP (and the personal data is not erased when putting the Linux in the pendrive). So I would like to know how to create a Live USB drive with personal files that are avaiable for many Operating Systems, including Windows XP. Perhaps the solution is to put openSUSE in a FAT file system, or put it in Linux file system but create another partition with FAT file system (for this openSUSE should avoid the 1st partition, sdX1, that should be for the personal data, so Windows XP can access it).
I'm trying to create a bootable install of Ubuntu 10.04 which boots off an 8GB Kingston DataTraveler USB stick. I used the latest Universal USB installer from pendrivelinux to install it, and I used the I386 ISO of Ubuntu 10.04. It successfully installed to the USB stick and I enabled 4GB of persistence. However, when I put it into any machine it gives me the following message:
Mount: mounting /dev/loop0 on //filesystem.squashfs failed: No such device (initramfs) Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs I tried redoing it, and redoing it without persistence enabled, but still no luck.
I wanted to clone a system (running slackware 12.1) so I created a tar file with all the directories from the original system, skipping over dev, mnt, proc, tmp and home. On the target system, after dumping the directories and running lilo (after using chroot to the mounted partition), the system booted and worked almost fine. The only problem is that the network card, sound card are not detected, and /dev/agpgart is not recognized by X. Everything else (usb controllers, PCMCIA, etc) works.
I had to create /proc on the target filesystem, and copy (with -R) /dev from the live cd (2005 gentoo based System Rescue CD) to the target filesystem. Are some files missing or maybe permissions are not set correctly? This is the second time I'm doing this and I'm missing something, but the first time it worked flawlessly (though it was one year ago, so I can't remember the details ) If anyone tried to clone a system the same way, please share any ideas (or any other way to clone one system to another (the systems differ from every point, so dumping the whole partition will not work), since a full reinstall takes too much time)
Is it possible to load a USB stick so it works as a Slackware bootstick, a dual boot system and Slackware 13.1 installation medium?I'm planning to install 13.1 on a netbook (Samsung NP-N150-KA01IN) which comes with Windows 7 installed and probably an OEM recovery partition (I don't have the netbook yet). In this LQ threaddimm0k asked about keeping the OEM boot system including OEM recovery while being able to dual boot Slackware.samac suggested using a USB stick to control the boot.During Slackware installation there is a step to create a USB bootstick.The netbook does not have a CD/DVD drive so I plan to use Eric Hameleers'usbimg2disk.sh (now part of the Slackware 13.1 distribution).It would be great if all three functions could be combined on single USB stick and it could also carry data files. I would be able to carry a complete "disaster recovery" solution while travelling light.Only downside to this plan is that losing the USB stick would mean only being able to boot Windows 7 I'm happy to put some work into this but don't know where to look for the architecture of the bootstick and can't reverse engineer it not having created one during installation.
View 14 Replies View RelatedI used a USB stick to make a bootable Slackware 13.0 USB.. uh, stick and now I need to use it to write stuff on -- can't seem to figure out how to format the thing so I can that
View 3 Replies View RelatedI have this around 4GB Slackware DVD image I downloaded last night. I was thinking to install it today through a USB -pendrive of 8 GB.
View 5 Replies View RelatedI got a new laptop today (yay) with windows 7 on it. I want to keep a small windows partition, just in case I need it for something. Anyway, I know how to use fdisk, and am comfortable installing on a disk without data I need to maintain.. but this new computer came with 5 (!) windows partitions. I don't know where to start.
I don't mind reinstalling windows after partitioning if I have to, but I really don't want to screw up the recovery partition. Any clues on where to start or what to look for? Or what NOT to do?
It looks like "my computer" has two partitions listed (c: and d: ). I guess I could just take note of the size of these two partitions, free up the partitions that match in fdisk, then repartition that space and install everything.
I need to reboot to do that, so I'll edit with the information when I have it.
fdisk output:
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x8e0eee9e
[Code]....
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement
147 GB for Windows, C:
85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
Here's the idea -- be able to boot slackware 13.1 DVD from a USB stick, but without using anything like an initrd or loading the contents of the slackware install all into memory first. So the USB stick is behaving like a hard drive (but with one disadvantage, just don't take the usb stick out while you're using it!). It has the advantage of saving on memory though .
In the above thread I had this idea working ok but only with slackware 13 and earlier. In fact I still have the CF card with it on, and it works fine. Only snag is it won't work with the newer 13.1.
Right now, I'm trying to use qemu for the following (not what I wrote above!). The idea is to use qemu to install a minimum slackware 13.1 to the USB stick, set it up and then boot from the USB stick itself (so I'm using the USB stick as the storage medium as opposed to say a hard drive image file).
So let's say (this is what I'm doing) I boot slackware 13.1 (32 bit) and make two partitions;
Code:
I then do a minimal installation of slackware (just "A" and jed from "AP"). Lilo is not installed as later I'll be using GRUB2 to try to boot.
I'm using a slackware package, grub-1.97-beta4-i486-1.tgz for slackware 13.1/GRUB2.
I then boot off the slackware 13.1 DVD but at the boot screen I choose to boot from /dev/sda2 which is the linux install I created earlier. Success, it boots ok and I can get into the slackware 13.1 install on the USB disk (which is /dev/sda2).
I then label the ext3 partition by using e2label;
Code:
And also change /etc/fstab;
Code:
Now I need some sort of bootloader to put onto the USB stick so I don't need the DVD any more. To do this, I'm trying to use GRUB2.
But here's the problem!
When I install slackware onto the USB stick using qemu, that partition is /dev/sda2. It's the first usb/storage medium that slackware detects so it gets the name sdaX. (X=1, fat partition, X=2 EXT3 linux).
But here's the problem. Suppose I take the USB stick over to another PC with a hard drive already inside it. Slackware would see the hard drive installed in that PC as (say) /dev/sda1 and the USB stick would then become the second drive, so /dev/sdbX (X=1, fat partition, X=2 EXT3 linux).
If I specify a specific device (lets say /dev/sda2) then it won't work in another system because if I take the example above, another PC with a hard drive installed in it the USB stick becomes /dev/sdb2 and the GRUB2 boot program would be expecting /dev/sda2 which won't work. What I need to do is to somehow find the install, the root on the USB stick automatically without having to specify it manually.
So here's what I've tried with grub (First thing I did was to install grub with grub-install /dev/sda).
Code:
Snag is it dosen't work :-( I get this booting from the USB stick:
Code:
If I try this:
Code:
I get a very similar result ....
Code:
So what I'm wondering is .... if the "search" line in grub is doing the searching for the root GRUB2 needs to use to boot from - how can I tell the next line, "linux /boot/vmlinuz-huge-smp-2.6.33.4-smp root=...." where to boot from? I can't use /dev/sda2 or /dev/sdb2 because if I try the usb stick in a different PC the stick will be a different device name. Trying to use LABEL= or /dev/disk/by-label/USB/ also dosen't work .
I have recently bought a Asus Eee PC Seashell 1005PX and it came with Windows 7 Starter Edition, it doesn't have any CD/DVD so I'm gonna/have been trying for some time now to install Slackware 13.1 from my 8GB USB stick. I downloaded the 13.1 ISO file and used Unetbootin to transfer it to my USB stick. I get stuck in the setup in the setup when I am to select the SOURCE DESTINATION. I've tried /dev/sdb1 which is my USB, also i've tried using mount into different directories but i'm new to Linux so that didn't go very well..
Some of you have recommended Alien BOB's guide but I have read the first parts of it. Is it really for people with Windows OS? It's a bunch of Linux CLI code and programs.. ?
I'd like to be able to manually mount a USB stick in console (before X is started) and I can't seem to find a good way to do that. I'm not too smart about HAL and UDEV and I don't want to undo the auto mount feature when X is running but still be able to manually mount and unmount as necessary; like for installing patches and packages after an install or version upgrade. It seems like there should be an entry in /etc/fstab and a directory in /mnt or /media but danged if I can find something that points the way.
View 12 Replies View RelatedJust a while ago, I switched on my desktop to copy over some PowerPoints I had made over the weekend, and Ubuntu would not boot (it has a kernel panic error.) Instead of dealing with the problem, I just finished with a new reinstall. I have all my files,to my external hard drive and my diligence to make copies of ALL my files, but I have NONE of my settings OR programs. All I have is access to my external hard driveand so I have to start from scratch. I know I can copy, for example, the .mozilla in my home folderget my plug-ins and bookmarks for Firefox and so on, but I would like to know if it was possible to create a CD or DVD with a "snapshot" of the system with its settings and programs (the files needn't be backed up, I already have devised a system to do that)so I guess you can say that I want everything but my files backed up and burned on an installable CD in case my computer decides to do this again (although it would be great to have my files on the same CD or DVD, but that's unrealistic).
So, are there any programs/utilities out there that are similar to the recovery media creator utilities such as those that come with HP computers? Also, is there something like Acronis True Image that will work with Ubuntu? I am almost falling asleep as I am typing this, so I will not see this until I get up in the morning; I spent the whole entire night trying to get up and running again, but I would appreciate any input as to how to be able to create installable snapshot CDs with settings and programs preinstalled and ready to go
