If I try to create a bootable USB stick by using dd to copy an ISO file to it, it usually works on PC but it won't appear in the boot menu of my Macbook. Is there an easy way to generate a bootable USB stick from an ISO file so that it would boot on a Mac?
View 3 Replies
I'm trying to create a bootable install of Ubuntu 10.04 which boots off an 8GB Kingston DataTraveler USB stick. I used the latest Universal USB installer from pendrivelinux to install it, and I used the I386 ISO of Ubuntu 10.04. It successfully installed to the USB stick and I enabled 4GB of persistence. However, when I put it into any machine it gives me the following message:
Mount: mounting /dev/loop0 on //filesystem.squashfs failed: No such device (initramfs) Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs I tried redoing it, and redoing it without persistence enabled, but still no luck.
I would like to boot any PC and make it work as an NFS Server. I like the concepts of liveCDs as they usually have drivers to recognize current and prior hardware to some extent. However, I do not need any GUI or any other services/applications; only what is required to run the NFS server and possibly copy/move files between exported folders from the command line. Can a liveCD be modified with a script to boot up as an NFS Server based on the following list? How do go about creating a bootable NFS Server based on the following list?
The NFS Server should do this upon boot:
- Check for NIC - eth0(?)
- if not present, stop booting with error message.
- if present, assign a specific IP address, mask, gateway.
[code]....
The goal woulb de to have a USB stick, bootable on any system, containing a local webserver to host various offline versions of websites. This stick can then be used to show demos of websites to people, even if they don't have an internet connection.
View 1 Replies View RelatedMy usb stick with Debian only loads from the usb hub it's crazy. I just tried putting the usb stick onto a usb3 port in my desktop and also on a usb2 port even the one where the usb hub is connected to and it wont' load!. Same initramfs prompt happens as when connected on the laptop usb ports.
the usb hub has usb2 speeds so is not that the stick is under usb1.1 emulation.
I'd like to use Ubuntu to create a multiboot usb pendrive/flashdrive. I know there are a few programs out there that I could use to boot multiple Linux distros from the same pendrive, but I would also like to use the drive to boot some liveCD versions of *BSD and also use it for storage.
View 1 Replies View RelatedRunning: Ubuntu 9.04 32 bits I'm trying to create an bootable usb drive for installing windows 7 so i took this release"Microsoft.Windows.7.Enterprise.x64.Integrated.Oct ober.2010-BIE"
1. Extracted to get the iso
2. Formated my 8gb usb flash drive with gparted
3. Extracted all the files from the iso with UNetbootin to my usb stick
4. Restarted and selected boot from removable drive in the bios options
After step 4 nothing worked i tried to remove booting from the hdd to force the computer to boot from the usb drive but just get the message that i need to insert an bootable media or restart.
Tried several times and the usb worked propperly while installing ubuntu 9.04 which I run this writing moment. I'm out of ideas and I don't have an cd/dvd reader to boot an dvd from either so via usb is the only thing my knowledge is capable to.
I have Fedora 13 and XP installed on my laptop. Right now it only boots to XP but I have a Fedora Live CD so is there some way I can use the live cd to boot into Fedora and edit or install grub to show up at boot?
View 1 Replies View RelatedI downloaded openSUSE 11.3 to my MacBookPro, whose disk drive has been broken for some time now. I want to install to new msi cr610 laptop that shipped WITHOUT windows. I could order the box with an install disk and printed manual, but if there's any way of creating a bootable USB stick from the download I did to my mac, that would be great.
View 3 Replies View RelatedI'm trying to install Ubuntu 10.04 on my netbook, but I can't figure out how to create a bootable USB stick form my current computer, running Mac OS X.
View 5 Replies View RelatedIs it possible to use usb startup disk creator to create an upgradable usb disk from the ubuntu live cd? There is information available on customizing the live cd, but it would be much better to boot from a usb stick and use apt-get to keep it up-to-date. My iMac will boot from a usb stick with an mbr installed and using the plop boot manager (won't work with refit), but any changes won't be persistent. Creating a file to hold changes won't help either because synaptic doesn't recognize it; besides I need more space for the package cache than fits into my RAM. And the maximum size for the storage file is 4 GB which still uses less than the available space (8 GB) on my stick. Can I tweak the filesystem on the stick to make changes persistent and use all the disk space? It is possible to install directly onto the stick, but this means it will be recognized as an external disk, and the iMac won't boot from it. Also, such an install is terribly slow.
View 4 Replies View Relatedsure you've noticed while installing slackware 13 you are prompt to create a usb boot stick...
I was not able to create one in case my slackware won't boot after installing windows...
My question is how to create a usb boot stick or recovery boot stick so that a can su lilo back to its configuration, so that I can select windows or linux on loader prompt(lilo)...?
I'm new here, an Ubuntu user who would try Opensuse for a while. That is if I'm able to launch the thing !
I'd like to create a Live Usb Stick to test it and install it if I like it but it doesn't seem to work.
I tried the website method, using "Win32DiskImager.exe" but the program doesn't work for me (WinXP) : it looks like it's writing but when the "Done" message is prompted, I'm unable to access the usb key, Windows says it's not formatted. That doesn't look right...
I tried with LinuxLive Usb Creator but the boot process fails and Universal-Usb-Installer doesn't offer an Opensuse option.
Is there another way to install the distribution on an USB stick ? I could still try through Ubuntu but that would be quite surrealistic.
But I can't install it on my netbook. I tried to create a usb stick with unetbootin from PartedMagic 5.6 and Sabayon but the install process crash near the end. Testing the disk I obtain the result that there is a file error. I tried to download again, but I have the same error. I create the startup usb stick with the Ubuntu utility, but at boot time it say "Unknown keyword in configuration file". I have a Fujitsu-Siemens Amilo Mini Ui 3520.
View 6 Replies View RelatedI've put openSUSE several times in USB flash drives. I've used the old method with dd ... and the new one with dd_rescue ..., shown in SDB:Live USB stick - openSUSE This way a partition is created (sdb1 or sdc1 or ...), with the Linux file system (ID: 83). One of the problems of this system is that all the data of the pendrive is deleted. Another problem is that sometimes openSUSE doesn't load completely and I cannot use it. And another of the problems is that even if I create another partition (for example to make the Live USB persistent and "remember" the configuration of my computer) and I put some of my photos, songs, films there when I plug the pendrive in a computer running Windows XP I cannot access the data. (What about Vista and 7?)
Other Linux distros can be put in pendrives using the FAT file system (for example W95 FAT32 (LBA), ID: c). This way my personal data or files (photos, documents, ...) can be opened from a computer running Windows XP (and the personal data is not erased when putting the Linux in the pendrive). So I would like to know how to create a Live USB drive with personal files that are avaiable for many Operating Systems, including Windows XP. Perhaps the solution is to put openSUSE in a FAT file system, or put it in Linux file system but create another partition with FAT file system (for this openSUSE should avoid the 1st partition, sdX1, that should be for the personal data, so Windows XP can access it).
my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
i was writing a .img file to my usb stick with ImageWriter, but it didn't seem to do anything so i clicked the close gtk button and pulled the stick out of my pc. now my pc gives my an when i try to open the stick. is there any way to fix this. I can use win xp pro, win xp media center, win 7 starter, ubuntu 9.10 and ubuntu 10.04
View 5 Replies View RelatedI'm about to ditch Freenas as my NAS software and make it an Ubuntu server box. The mainboard is an Asus AT3ION-T dual core Atom board. Freenas runs happily from USB stick. I have no optical device to install Ubuntu from and would like to install Ubuntu Server to a USB stick.
View 8 Replies View Relatedi am running into few problems with the script here. I have an FTP server, all configured, and i need to have a script that will create a folder with current dated within a tree as soon as particular user logs in. I was wondering if that is possible with proftpd. if not, can someone suggest how to create a script that will simply create a DIR with date and autorun itself every 24 hours? i am running Debian/Proftpd with Mysql authorization.
View 14 Replies View RelatedI installed Ubuntu via USB drive onto my hard drive. If I boot the PC without the usb drive I used, Ubuntu will not load. After booting I can unplug without any consequences.
I looked on the hard drive and there is a boot folder. On the USB drive, this is the tree contents:
/media/disk$ tree
.
|-- adtext.cfg
|-- boot.cat
|-- f10.txt
|-- f1.txt
[Code].....
Am I correct in my assumption that the boot aspect is associated to the USB drive? If so, how do I get it to boot without the USB? I'm guessing copying into some location and modifying grub?
I used unetbootin to make a bootable usb with PeppermintOs and then reset the BIOS to boot from 'removable'.
It would not boot - went straight to the (grub?) menu offering mint, and mint safe recovery which is from the hard drive.
First USB did not work, so bought a new one (4gb) and that did not work so borrowed a 1GB from a colleague. This did not work either.
I have tried two different ISOs (having done the MD5sum on them as directed).
I have tried fat 32 and ext formats (using gparted to format it as I don't know any other way) and from there I can see that it says boot, lda).
When I disabled HDD from BIOS, the USB was read but then the message was that no boot device found, replace with proper boot device.
I also tried using the start-up disc creator.
Each time I have tried it on my desktop PC too, having set up the BIOS and I haven't been able to boot with them there either. I know that the netbook will boot from USB as that is how Mint 9 got installed on it.
In desperation I even tried creating the USB from windows. Even that didn't work.
Whilst I have a working copy of MInt 9 on the netbook, this is not vital, but I so want to try peppermintOS on it.
I just wanted to glean some sort of a general average and compare my system with everyones. post your computers:boot time of course hardware specifications (processor, HDD, RAM, etc.) distribution if it's a laptop or desktop (or a netbook ) Mine is 43 seconds, running Ubuntu 9.10 on a netbook. My hardware specs: Intel Atom 1.6 GHz 320 GB 7200 rpm HDD 2 GB RAM
View 14 Replies View Relatedto do all the time fsck at boot, how to chagne this value to 4 please?
View 1 Replies View RelatedI installed the ubuntu 9.10 cd and for some reason as of last night it only boots halfway. it shows grub, shows loading keymap nd apparmor profiles, then before it shows mpd and apache load it erases everything and stops at a dark grey screen. all before i get a shell of any type. if i leave it alonethe screen still darkens like its going to sleep. is there any way to troubleshoot and fix this?
View 2 Replies View RelatedI recently installed Kubuntu with the windows installer wubi. Everything has gone fine until today. When i turn on the pc i normally have a prompt to go to windows or kubuntu. I choose Kubuntu and it loads it up. But now it goes to a grub prompt and i have no idea how to fix this or get into Kubuntu.
Things i did before the last reboot that may have caused this.
I edited my swappiness to help speed things up at the advice of many websites.
Example: url
I changed it from 60 to 10. I did this by adding the line "vm.swappiness=10" to the end of sysctl.conf
I noticed that there was a # or something at the beginning of every line in sysctl.conf and i did NOT add it to my line. This is my guess as to why i am having problems.
The other thing i did was some bug updates. Something was popping up down by the clock area and it was asking me to do some bug updates of some sort. I said yes.
Any idea on how i can fix this? As of now i cannot get into kubuntu at all. It just gives me a grub command prompt.
I'm trying to mount a filesystem when the system boots, so i won't need to mount it everytime..
So what I did was copying the line of the filesystem I wanted to mount on startup from /etc/mtab:
Code:
And pasted it as it is, in the /etc/fstab file. when the system booted, it didn't work. not only that, I wasn't able to mount the filesystem at all, (it gave me some kind of an error) so I removed the line from fstab file and it all back to normal. how can I mount this filesystem on boot? (i'm using Fedora 12)
As the name says, I'm new to Linux. I've never even seen Linux. Super noob. I have installed Ubuntu 10.04 onto a Dell Dimension 2350 P4 1.8ghz, 1g ram, GForce 4x 128mb video card running XP. I installed from a Live CD and rebooted. The screen says "finishing Ubuntu install" does a countdown and loads into BusyBox instead. This is what I see:
BusyBox v1.1.3 (Debian 1:1.1.3-5ubuntu7) Built-in shell (ash)
Enter help for a list of built-in commands.
(initramfs)cannot mount /dev/sda1/tmpmountpoint
If I boot from the CD I get: Unable to find a medium containing a live file system I'm stuck, I don't know many commands so step by step. Simply saying 'load grub' means nothing to me.
When i try to launch a live cd (any of them) I get an "out of range" logo on my monitor. I am aware this means my resolution is not right. Why it's not right is beyond me, isn't this supposed to auto detect these problems and adjust accordingly? I figured installing debian may fix the issue, so i did. Come to find out this garbage linux can't even read a sata drive! So I put in my ide HDD and it installs fine, now I have this dumb video problem. Funny as how windows is supposed to be a crappy os in comparison to linux and yet it doesn't seem to give me any problems. So now that you have a first hand perspective of my frustration, what I can do to get this os working on my computer? I just want to be able to see it, so I can play with it and learn to use it. Is that so hard.
View 5 Replies View RelatedI was following a lesson with my UNIX Academy training and by mistake made a change to inittab. now it boots into black screen. How can I get into shell to fix inittab
View 2 Replies View RelatedFstab has at the end some values: 0 1 for / or 0 2 for /home or others.
It is nice to set tune2fs -c 2 for disks that have to be reliable and increase the security of the data.
tune2fs is not working for JFS. How to make this check at every single boot of the Debian/ubuntu machine?
