Slackware :: Set Mouse Tapping To Off?
May 8, 2011
I got a netbook and I'd like to know how I can fix something that is annoying the heck out of me.
1- How can I set mouse tapping to off? I have searched and all the threads I could find were related to the use of the synaptics driver. However, synclient accuses no synaptics driver being loaded and it is as far as I can tell a PS/2 mouse. kcm_touchpad also is completely grayed out. I think I'll have to write a mouse.conf to place in /etc/X11/xorg.conf.d/ but I have no idea what to put there.
View 6 Replies
ADVERTISEMENT
Dec 13, 2010
Iv'e got an issue with mouse speed, on boot the mouse is to fast, so I found that the command
Quote:
slows it down the way I need. But now, each boot I need to run it again. Is there a place where I can put it so it runs every time X starts? Also, googling a bit I found that udev rules can be used instead, but I don't know how to write it as a rule.
View 1 Replies
View Related
Oct 24, 2010
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies
View Related
Aug 26, 2010
I recently logged into my Slackware 13.1 account and when I issued the "startx" command , there was no toolbar at the bottom and I couldn't see my mouse. I was able to click on a short-cut on my desktop , and my mouse came back. I can't open any thing except VirtualBox. When I open it , the top is cut off , so the minimize , maximize and close buttons are cut-off . I really have no idea what to do.P.S. I have XFCE instead of KDE
View 5 Replies
View Related
Feb 25, 2011
I'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
View 13 Replies
View Related
Nov 8, 2010
How can I get my mouse scroll to work in slackware?
View 2 Replies
View Related
Dec 11, 2009
how can I disable the touchscreen tapping on F12?
View 2 Replies
View Related
Jan 10, 2010
I recently switched to Fedora from Debian (Fedora 12 LXDE Spin), and the one thing that bothers me is that I can't find a way to enable tapping on the mousepad to click. So far the solutions I've found have included editing the xorg.conf, which, to my understanding, is no longer included in the Fedora kernel.
View 1 Replies
View Related
Dec 7, 2010
I've been using Slackware for ages... since like 1997 or 1998. I have a Slackware 3.x CD around here somewhere. I'm usually the one explaining how Linux works to everyone else. I even got GnuCash working on Slackware. So these two problems ...
1. Keyboard in Xorg. It seems to work, except the down arrow and the page down buttons are mapped as something else (the down arrow causes TEXT TO DISAPPEAR...I've had to type this like three times now...). After a bunch of searches, it looks like a problem with HAL and evdev (whatever that is). I tried setting the model in KDE's Regional control panel but that had no effect.
Xorg.conf settings for this section... you can see some remnants from prior attempts:
I did check that event1 refers to the keyboard. The keyboard is a Microsoft Internet Keyboard that works fine; the arrow keys work great outside of X.
2. Mouse in Xorg. The scroll wheel wants to scroll side to side instead of up and down. This also happens to be a Microsoft product (I like their mice... my wife brought the Microsoft keyboard into the relationship...). It's just a wheel optical 3-button mouse, nothing special. Again, none of my usual xorg.conf edits seem to work; here's what I have right now.
Again, I checked that the mouse is event2.
Someone really should make an upgrade guide for people like me that have been using it for years and aren't really following the tech that explains new features like hal and evdev (I know hal has been around for a couple versions, but I've never gotten involved with it until now). Or maybe there is one and I'm just not aware of it. Basically I just want it to just work, which is why I use Slackware in the first place!
I should mention I did have both working under Slackware 13.1 on this machine until Windows conveniently erased my root partition for me, so I got to do a completely clean Slackware install for the first time in a LONG time. That's when the issue arose. Because I was in a rush, I did a full install. I assume the previous setup was using non-hal/non-evdev methods, but I might as well set this one up using the new methods, right?
I'm using Slackware64 13.1, running on a Core 2 Quad Q8300 @ 2.50 GHz. Hardware is fine - both mouse and keyboard work under Windows XP, and like I said the keyboard is fine outside X. It has to be some configuration problem ...somewhere.
View 11 Replies
View Related
Jun 20, 2011
I have a HCL K21 pdc notebook. When I install Fedora 15 KDE then there is no tapping and scrolling of touchpad. But the cursor is moving. It does not work in Live CD as well as in installaton. I have updated F15 to full but still no luck. Touchpad : Synaptics The buttons below the touchpad are working and all the options in system settings are enabled
Note : I have read a forum in which touchpad is detected as ps/2 mouse. So I tried to disable the ps/2 mouse but it disable the cursor movement of touchpad, so it may be some kind of problem!
View 13 Replies
View Related
Mar 31, 2010
How do I enable touchpad tapping
View 4 Replies
View Related
Aug 2, 2011
I followed guide on [URL] but I cannot disable tapping no matter how I do it.
I tried System > Preferences > Pointing devices (also Mouse one) and both unchecking "Enable mouse clicks with touchpad" and checking "Disable tapping"...doesn't work
I think that wiki needs and update cause there is way too many things are is not correct.
View 4 Replies
View Related
May 14, 2010
Install Debian Squeeze onto Thinkpad T410. Got the basic things working and noticed that - movement of touchpad results in moving of mouse pointer, which is correct, but - tapping on the touchpad does not simulate a click action. Confirmed that the touchpad hardware is working by booting into a CrunchBang LiveCD. how I can enable the touchpad tapping action?
View 2 Replies
View Related
Nov 11, 2010
Installed 13.1 as a guest in VirtualBox with Debian Lenny 5 64bit as host. The mouse, gpm, and the keyboard work alright at the black screen but in the graphical thing, forget its name.....Xsomething, not KDE, there is no mouse or keyboard; for example the screensaver just goes on and on and nothing will stop it.
View 14 Replies
View Related
Mar 11, 2010
Symptoms
- PS/2 mouse works fine under gpm
- PS/2 Keyboard works in console terminal
- Neither Mouse nor Keyboard works under kdm or xdm
- And: #ps aux | grep hal
shows:
82 4259 0.0 0.3 6472 1240 ? Ss Mar10 0:02
/usr/sbin/hald --daemon=yes --use-syslog
but does not show anything like:
root 4298 0.0 0.1 3300 544 ? S Mar10 0:00
hald-addon-input: Listening on /dev/input/event1
- And syslog show: when starting hald with --verbose=yes --use-syslog
Mar 10 20:30:48 darkstar hald[519]: 20:30:48.792 [E] hald.c:124: Cannot
start addon hald-addon-keyboard for udi
/org/freedesktop/Hal/devices/platform_i8042_i8042
_KBD_port_logicaldev_input
Mar 10 20:49:41 darkstar hald[2454]: 20:49:41.651 [E] hald_runner.c:671
: Error running 'hald-addon-keyboard':
org.freedesktop.HalRunner.Failed: Start request failed
- You will find that deleting:
/var/cache/hald/fdi-cache
(and of course: /etc/rc.d/rc.hald restart)
- will allow hald to start the correct module:
/usr/libexec/hald-addon-input
- instead of trying to start a non-existant file:
/usr/libexec/hald-addon-keyboard
My theory is that since hald is the same version in 12.2 and 13.0, had believed that the cache file held valid information, when in fact it did not. I did not think to check the modification date before deleting the file.
View 1 Replies
View Related
Mar 23, 2011
I have problem with my Slackware 13.1. When I run system under log in is "user" after 5 minutes system is hung! I can't move mouse and use keyboard! I didn't have this problem when I run system under log in is root. How I can decide this problem ?
View 6 Replies
View Related
Nov 13, 2010
I just switched to a usb mouse in slackware 10.2 and after installing it and configuring it still keeps jumping all over my screen.Currently I edited xorg.conf to:
Code:
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "SendCoreEvents"
[code]...
View 1 Replies
View Related
May 1, 2010
I have an EeePC 1000HA with Debian squeeze, and I can't seem to find the option to enable touchpad tapping. Is there a certain config file for the synaptics-touchpad driver I need to edit?
View 6 Replies
View Related
Mar 27, 2011
Since when I installed Debian, I couldn't manage to make the tapping function of this touchpad work on my laptop - a Dell Latitude C610, with Debian squeeze. As suggested on [URL], I created a xorg.conf file with
Xorg :1 -configure
After that, I opened the file for editing it. There was no line regarding the Touchpad. The closest to that I found was
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
I tried adding the lines on [URL] ... C_Xorg_7.5 to the file, but it didn't work. I also tried installing gsynaptics but, even though the tapping function was enabled there, it didn't work. A weird fact is that vertical scrolling with two finger touch is working, but not tapping.
View 5 Replies
View Related
Mar 11, 2011
I'd like to ask a way to enable touchpad tapping permanently in gnome. I have installed gsynaptics, it starts up with gnome, but every time I log in, I need to go to Control Center->touchpad and enable tapping manually. In openSUSE 11.3 the default behavior was that if you enabled once, it remains so. Also it would be great that tapping to be enabled by default ( like in Ubuntu ), because not everybody knows how to enable it.
View 2 Replies
View Related
Feb 25, 2011
I downloaded it from packman and it's not working. I tried loading some old projects from when I was working Cecilia in Xandros, but they don't load. I tried loading .wav and .aiff files, but they don't load. Unfortunately, this app is useless, but it worked perfectly in Xandros (which is useless). Is there a particular repository I should be tapping instead of packman for Cecilia/Csound? Maybe this app is just plain outdated.
View 5 Replies
View Related
May 27, 2010
I installed 13.1 last night and started playing with KDE4.4.3. I'm talking about Konqueror as a file manager only here. My default view is to have the folder tree in the left pane, with a detailed view pane on the right. In KDE3, I use the "Tree List View".In KDE3, I had my mouse set to "double-click to open files and folders". However, in KDE3's konqueror, you could still navigate the folder tree with a single click. One click on a folder in the left pane would show the folder's contents in the right pane, or a double click in the left pane would expand the tree to show subdirectories. I could still single-click on files in the right pane to highlight them without opening them.
In KDE4's konqueror, it requires a double-click to do anything with the folders, either to display in the right pane or expand the tree. It's a lot more effort just to get around in the folder tree. I found the Mouse setting in the System Settings that changes overall single-click/double-click behavior. If it's on single-click, it's easier to navigate the folder tree but then I end up opening files I don't want to just by trying to highlight them with a click.I dug through Konqueror's settings in both KDE3 and KDE4 but couldn't find what gave me behavior I liked in KDE3 or how to duplicate it in KDE4. In KDE3, the system setting is on double-click, but there doesn't seem to be a konqueror-specific mouse setting to customize it. Anyone else notice this? Is this hard-coded into konqueror, and it changed from 3 to 4?
View 1 Replies
View Related
Apr 6, 2010
I've upgraded from Slackware 11 to 12.2 and now my mouse cursor just sits there in the middle of the screen! I've managed (using the keypad to move the mouse cursor) to edit the /etc/X11/XF86Config config file, but all to no avail. I've googled for an answer but I don't understand all the talk about "blacklist". I've got a Pentium 4, 101 keyboard, ps 2 mouse.
View 2 Replies
View Related
Jun 4, 2010
Is it possible to setup tapping so that a fast tap with two fingers behaves like the right click button.
View 12 Replies
View Related
Feb 24, 2011
After the updating the synaptics driver in wheezy, I can no longer tap to click. This includes single-finger taps in the center and corners. Here is the relevant section from my xorg.conf
[Code]...
View 4 Replies
View Related
Oct 19, 2014
I've installed Debian Wheezy on my HP G62 notebook. In windows the touchpad worked well with all features. But now I can't turn the touchpad on/off by tapping on the LED, which doesn't shines. Also I can't use the double click feature.
View 1 Replies
View Related
Oct 24, 2010
In Kwrite,Kate or KDE itself ,my USB 5 Button Mouse works fine, But in Dolphin, Chrome or Konqueror ,the "Mouse wheel scolls by..." in "system settings" didn't work, Dolphin scolls by itself, not 1 line or two lines...I'm eagering to know why these happend and if there are some way to force the mouse scoll lines
View 1 Replies
View Related
Nov 10, 2010
For example I'm setting key F1 & F2 keys mouse 1 and mouse 2 click in keyboard..
View 4 Replies
View Related
Sep 30, 2010
so, I compiled the 2.6.35.7 kernel yesterday and used the config from 2.6.35.6 doing make oldconfig,etc
its the vanilla kernel with BFS, BFQ[*], Tuxonice, aufs2, & squashfs-lzma patches after compiling and rebooting I have noticed that the mouse freezes whenever the pc cpu is running high cpu % this didnt happen before with any other kernel and as I said, I used the 2.6.35.6 config Has anyone else had issues with 2.6.35.7 kernel? hardware is amd athlon64 3300+ 2.4ghz 1GB RAM, on 32bit Slackware -current I am going to compile the vanilla kernel now and see what happens.
View 3 Replies
View Related
Feb 26, 2010
Well, just as the title of this post says, I am having keyboard and mouse problems. Here's the storyMy friend Cody wanted me to take a look at his computer for him (I'm sort of known as a Linux nerd in my school lol) because his keyboard and mouse do not at all work in init 4 mode. I've tried reconfiguring the keyboard and mouse by trying a different module. I've even tried reconfiguring X alltogether by running "X -configure", which didn't work
View 3 Replies
View Related
