Slackware :: Pad Scrolling Not Working
May 23, 2010I want to make my pad to (vertical) scroll since i do not use a mouse on my laptop (Slackware 13.0 on a Toshiba Satellite 2450 laptop).
View 2 Replies
ADVERTISEMENT
Ubuntu :: 10.04 Two-finger Scrolling Not Working?
Apr 30, 2010I've freshly installed Lucid on Acer Aspire One 250. I had 9.10 before and two-finger scrolling was working with modification on the 11-x11synaptic.fdi file.
However, now with 10.04, the option in mouse properties is grey ed out... Any way to re-enable it?
Ubuntu / Apple :: Reverse Scrolling And Inertial Scrolling?
Dec 1, 2010I've just recently put Ubuntu on my 2010 Macbook Pro 13 inch, and all seems to be running more or less alright.One thing i miss from OS X is the ability to reverse the scrolling direction, also inertial scrolling.Is there any way to implement this in Ubuntu?Also, i have already installed the Mactel trackpad drivers.
View 2 Replies View RelatedFedora Hardware :: The Touchpad Scrolling Not Working?
Aug 29, 2011i'm having a little bit of trouble with my touchpad, it is apparently recognized as a PS2 Mouse, so no edge scrolling obviously, i read through xorg-x11-drv-synaptics-1.4.0.901-1.fc15 (1686) description:
Code:
This is the Synaptics touchpad driver for the X.Org X server. The following touchpad models are supported:
* Synaptics
* appletouch (Post February 2005 and October 2005 Apple Aluminium Powerbooks)
* Elantech (EeePC)
* bcm5974 (Macbook Air (Jan 2008), Macbook Pro Penryn (Feb 2008), iPhone (2007), iPod Touch (2008)
Note that support for appletouch, elantech and bcm5974 requires the respective kernel module. A touchpad by default operates in compatibility mode by emulating a standard mouse. However, by using a dedicated driver, more advanced features of the touchpad become available.
Features:
Movement with adjustable, non-linear acceleration and speed. Button events through short touching of the touchpad ("tapping"). Double-Button events through double short touching of the touchpad. Dragging through short touching and holding down the finger on the touchpad. Middle and right button events on the upper and lower corner of the touchpad.Vertical scrolling (button four and five events) through moving the finger on the right side of the touchpad.
The up/down button sends button four/five events. Horizontal scrolling (button six and seven events) through moving the finger on the lower side of the touchpad. * The multi-buttons send button four/five events, and six/seven events for horizontal scrolling.Adjustable finger detection. Multifinger taps: two finger for middle button and three finger for right button events. (Needs hardware support. Not all models implement this feature.) Run-time configuration using shared memory. This means you can change parameter settings without restarting the X server. and it says that it requires specific kernel modules for the touchpad, otherwise it will be recognized as a normal mouse. Maybe I'm wrong but i think my problem fits in this state.
My notebook is a Dell N4030, Here are some outputs:
uname -a:
Code:
Linux alberto-dell 2.6.40.3-0.fc15.i686 #1 SMP Tue Aug 16 04:24:09 UTC 2011 i686 i686 i386 GNU/Linux
lspci:
Code:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
[code]....
Ubuntu :: 10.04 Edge Scrolling Stopped Working?
Apr 30, 2010i have the 64 bit version (my computer is 64 bit) of lucid lynx and my edge scrolling doesnt work.
View 1 Replies View RelatedSlackware :: Mouse Randomly Quits Clicking And Scrolling And Windows Freeze
Jul 20, 2011Unfortunately, I've encountered a disaster the likes of which I've never seen before:Yesterday, in slackware 13.1, while using firefox, the window would no longer move or resize, and I could no longer click on things in that window.While this happens, the icons in xfce4 panel no longer acknowledge that the mouse is rolling over them, so I can't launch terminal from a panel, etc.; however I am still able to right click on desktop and open terminal and other apps that way.Since it was high time to upgrade to 13.37, and since I was experiencing weirdness, I decided to do a clean install: I actually repartitioned my drive, and reformatted the partitions (all xfs, and after backing up my data, of course)...
I don't know if that's significant, or not. there seems to be some lines in /var/log/Xorg.0.log about my logitech mouse.way too complicated to write by hand.I will log out and back on... sometimes that frees up other windows. Then I'll add the Xorg.0.log.
Slackware :: Slackware 13.1 VIA VT1708S Audio Driver - Get Working Without Rebuilding The Kernel?
Jun 23, 2011I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?
View 5 Replies View RelatedSlackware :: Alfa AWUS036h Rtl8187 Adapter Not Working On Slackware 13.1
Oct 13, 2010I recently bought the Alfa AWUS036h which uses the Realtek rtl8187 chipset. I am able to load the module and connect to any network, but its almost as soon as I try to load a page the connection drops. It never stays connected for more than 30 seconds. My other computers using the same adapter in the same spot work fine, unfortunately there not running slackware. I've tried compiling the newest stable kernel and checked the rd.inet1.conf settings.
View 6 Replies View RelatedSlackware :: Get The Moonlight Extension Which Enables One To Watch Sky TV Working In Slackware?
Mar 13, 2011Has anyone managed to get the moonlight extension which enables one to watch Sky TV working in slackware? I have the extensions for firefox and chrome but all I get is a blank screen.
View 5 Replies View RelatedSlackware :: USB Printer Stopped Working After Upgraded Slackware
Mar 3, 2010My USB printer stopped working after I upgraded Slackware, using the Current.Also can not install any USB printer. CUPS version 1.4.2.
View 14 Replies View RelatedSlackware :: Watchport V2 Webcam Not Working Slackware 13
Nov 20, 2010I am fairly new to this and I cannot get a watchport V2 webcam in working slackware 13.
It seems to be recognised;
Bus 003 Device 002: ID 1608:4001 Inside Out Networks
Slackware :: Everything Is Working Fine Automount Not Working?
Jan 10, 2011I have Slackware 13.1 with kernel 2.6.37. Everything is working fine, except that I can't mount any CD/DVD and automount is not working either. If I connect any USb to my laptop it doesn't automount, I need to manually mount it. The same case happens with CD/DVD only that I can't mount any CD/DVD even manually. Here's the output:
Code:
bash-4.1# mount /dev/cdrom /mnt/cdrom
mount: block device /dev/sr0 is write-protected, mounting read-only
[code]...
Slackware :: PHP Is Not Working On 13.37?
Jun 13, 2011I installed Slackware 13.37. I configured httpd.conf like this:
# Uncomment the following line to enable PHP:
#
Include /etc/httpd/mod_php.conf
[code]...
Slackware :: Getting The Vmplayer To Working On 13?
Feb 11, 2010I installed vmplayer, run the bundle script, couldn't see what got installed where, just as in Windows so it seemed. There is no uninstall script I started vmplayer and got a list of messages.
(vmware-modconfig:4131): Gtk-WARNING **: GModule (/usr/lib/gtk-2.0/2.10.0/engines/libxfce.so) initialization check failed: Gtk+ version too old (micro mismatch)
(ten times)
(vmware-modconfig:4131): Gtk-WARNING **: GModule (/usr/lib/gtk-2.0/2.10.0/engines
[code]....
Some modules are missing in the generic kernel.As well as a 'VMware module kernel updater' screen saying that the Kernel headers for version 2.6.29.5-smp were not found. They are clearly present..
Slackware :: Cron Job Not Working?
Nov 13, 2010I set up a job in my crontab file to clear the /tmp file on bootup with the following line:
Code:
@reboot rm-rf /tmp/*
My /tmp folder is not clearing. I've never used cron before;
Slackware :: Instead Of Not Working Key To Assign A Different Key?
May 11, 2011I have an old laptop.The laptop's 2 keys(g-h) are not working.I think the keys assign to different keys that the keys are windows keys near CTRLs because linux dont use these keys.Can I assign not working keys to the windows keys?
View 9 Replies View RelatedSlackware :: LibreOffice 3.3 Not Working?
Apr 10, 2011I know there are SlackBuild scripts for installing LibreOffice, but I wanted to compile my own packages. So I downloaded the RPMS and then converted them using rpm2tgz and used pkgtool to install all the packages.
Until then everything was fine. No warnings, no errors. But when I tried to run the various applications e.g. Impress, Writer etc. It didn't work. When I try to open any application, nothing happens. Just the icon bounces beside the KDE cursor for sometime.
Slackware :: Localhost Not Working In 13.1?
Jan 30, 2011I just setup a dual boot on my laptop with Windows 7 and Slackware 13.1
I've been using Slax for one of my web programming classes and I got tired of booting from a live CD all the time so I decided to just use Slackware. When I try and connect to the localhost page, I get a cannot connect error page. Why?
Slackware :: Mc -e Stooped Working In 13.1 RC1
May 19, 2010I'm looking forward to see the new 13.1 Slackware release although I always stay -current. Just a quick one I've found: When the RC1 was announced the mc-20100509_git-i486-1 broke the standard use of
Code:
mc -e
is this going to be permanently repleaced by
Code:
mcedit
or a bug?
Slackware :: Sound Not Working In S13.1?
Aug 19, 2010I was reluctant to start yet another sound thread, but after days of searching sites and reading mini HOWTO's I'm still mute. I have tried configuring ALSA via:
# alsaconf
# /etc/rc.d/rc.alsa start
# alsamixer - all relevant sliders unmuted...
# alsactl store
...and still nothing. KDE reports that 'Audio playback device ALC889 does not work.' My kmix app doesn't even start. At boot I get this message 3 times:
"ALL CONFIG FILES NEED /etc/modprobe.d/sound - it will be ignored in a future release"
Even starting xmms brings up 'Check that - your soundcard is configured properly/the correct plugin is selected/no other program is blocking the soundcard'. btw, Windows reports I have an ALC888, not a 889. KDE lists it as present as both digital and analog, and the legacy system (whatever it is) as well as esound, but none work. I certainly had no difficulty with S11.
Slackware :: Internet Working But Not Always
Mar 10, 2011I am a newbie in Slackware. This is my first try to make working system on slackware. I made internet connection by help netconfig. Internet is working but not always. To example I try download page but it doesn't. I push Update page .. and one more time Update page and after 3-4 times my page is downloaded. When I work with windows on this computer, I don't have any problem.
View 3 Replies View RelatedSlackware :: Trying To Get Old CRT Touchscreen Working
Dec 10, 2010How to get a older crt touchscreen working. I need it to work for a handicapped child. When I check the device it seems slackware detects it as a mac emulation mouse and I installed egalaxy drivers. It seems something is right, when I touch the screen the cursor goes to the right top corner and moves a bit when touching the screen.
View 5 Replies View RelatedSlackware :: Get Freecad Working On 13.37 64 Bit?
May 13, 2011I am trying to get freecad working on my 13.37 64 bit There must be a problem with xerces-c slackbuild This is what I get running the slackbuild checking for C compiler default output file name. configure: error: C compiler cannot create executables See `config.log' for more details. the last line in the config.log is
configure: caught signal 2 configure: exit 1 I am dumb founded tried with src2pkg but that gives another error Skipping compile_source - FAILED!! No INSTALL_LINE given.
Ubuntu :: Two Finger Scrolling Goes Away
Dec 9, 2010I've been able to get two finger scrolling working thanks to ptosiani's solution in this thread: [URL]
The problem is if I restart my computer, two finger scrolling doesn't work anymore and I have to go through the process again to get it working. Does anybody have some insight on this problem?
Ubuntu :: No Scrolling On Eveince?
May 11, 2011changed my pdf viewer from adobe to evince because it seems to better kind of better. The only problem is that i cannot scrloo down or up. The continuous page is checked but i cannot scroll down with my touchpad. I can do it with the arrows but I want to be able to do it with the touchpad, how can i fix this?
View 1 Replies View RelatedSoftware :: Mc 4.7.0 - Smooth Scrolling?
Nov 12, 2010I'm using Midnight Commander 4.7.0 on Ubuntu 10.04.1, and would like to know if there's a way to change the default behavior when scrolling up/down using the arrow keys: By default, when reaching the last item, MC scrolls down one half-block, which I find very annoying. Is it possible to reconfigure MC to simply down one item? Google didn't return much on this.
View 7 Replies View RelatedSoftware :: Page Scrolling In Man?
Nov 29, 2010Kernel 2.6.21.5, Slackware 12.0man 1.6c I'd wish to change man's behavior. By pressing the space bar, he scrolls down one screen. This is his present behavior. I want the new screen to repeat the last line shown in the previous one. That is [code]Present screen:
Code:
line1
line2
[code]....
Slackware :: Webcam Not Working On Slack 13.0
Dec 23, 2009I have a XPS 1530 and when I type
lsusb
[code]
It seems to be that the camera is recognized by the OS but it is not working when I try to use it in skype or in EVO.
Slackware :: 13.37 - How To Get Bluetooth And Blueman Working
Jun 22, 2011Bluetoothd is running.
bash-4.1# pgrep bluetoothd
25394
But when I start blueman-applet the icon on the toolbar is like white with a red 'x' in the centre of it, which doesn't seem right. I'm using fluxbox as my WM so don't know if that's the reason, but blueman isn't responding when I try to setup the device with gui (blueman-applet). My groups for my user are.
Users wheel floppy audio video cdrom plugdev netdev scanner
Hci0 is up.
bash-4.1# hciconfig
hci0:Type: BR/EDR Bus: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10
UP RUNNING PSCAN
RX bytes:2592 acl:0 sco:0 events:75 errors:0
TX bytes:800 acl:0 sco:0 commands:66 errors:0
Slackware :: 5.1 Surround Not Working Properly
Jul 10, 2011i have problem to get my 5.1 surround sound card to work properly on Slackware 13.37 with example the Mplayer, Spotify or even when watching movie-clips at .....s. I have searched through forum but havent find any solutions to this problem.I have tested my sound card and it seems to work properly when executing "speaker-test -Dplug:surround51 -c6 -t wav" in the terminal. I have saved the ALSA settings through "alsactl store". But like i said, it still doesnt work with explicitly programs like Mplayer or Spotify, it still plays the sound as 2.1 (stereo).
View 3 Replies View Related