OpenSUSE Install :: Where Is Kernel:/stable For 11.4
Mar 19, 2011
I used to install the latest kernel for opensuse 11.3 from this repo:
Index of /repositories/Kernel:/stable
but for 11.4 it is empty. I can see that for 11.3 the 2.6.38 kernel is already built.For 11.4 there is only the Kernel:/HEAD repo. Are we going to have a kernel:/stable repo for 11.4?
I am using OpenSUSE 11.4 64 bit with GNOME. I also use the Tumbleweed and Packman for Tumbleweed repositories. Accoording to uname -r, my current kernel version is 2.6.37.1-1.2-desktop.
How do I safely update to the latest stable kernel version?
I am new to OpenSUSE. Please provide step by step directions.
I installed a fresh copy of Slackware 13.1 (stable) on one of my media servers and I am experiencing something strange.... When I power up the machine, I see the kernel booting, no errors, until it gets to the point where it says:
And then randomly freeze there.... Well the machine is not totally frozen because the cursor still blinks. But it will never continue... Like I said, this happens on a random basis... After a reset, it might go through or simply stall at the same spot.
I remember after installing Slack 13.1, I rebooted the machine but forgot to remove the DVD from the player, so the install routine started up, and froze at the same point when it was loading the kernel for the setup programs...
My mobo is a MSI k9N platinum.
I never had this problem before.... (well I never used 13.1 before). Since I got this machine, I used slack 12.2 and slack 13-current with success.
This problem makes the machine extremely unreliable because I intent to use it as a backup and media server, so chances I will WOL the machine and use it remotely... if that happens.
i know if u search a solution in forums u get so much confused information. i hope this little manual will help all with the nvidia driver problem! u dont need to edit or create a xorg.conf or something to run the driver correct and u need no blacklistedit too! if u did the standard opensuse 11.3 install its only about 2 kernel packages and the disabling of the x11noveau driver.
1. after standard installing opensuse 11.3 update and install the opensuse softwareupdates
2. install with the yast software re/installer:
(from Desktop or from the terminal. the terminal text command is: yast2)
[Code]...
u dont need to change the menu.lst after all, only u get many problems. run the midnight commander and delete the nomodeset word and the noveau driver would be normally still active after reboot.
I should update my Opensuse 11.0 to the last stable version?I need to know exactly how to do: should I download an iso image?Should I operate from Yast?
kernel with which most version number may be compiled in Debian 5 stable without updating to testing? 2.6.32.8 can't compile, if not turn off virtualization, since Documentation/least/least.c
contains #include <sys/eventfd.h>
which is present in libc6-dev from testing, but is absent in stable.To drivers compiling kernel used own linux/eventfd.h.
Which is the current stable version of kernel in fedora 10 and how can I installed because right now I have unstable kernel: uname -a Linux blind 2.6.29.3-60.fc10.x86_64 #1 SMP Sat May 9 04:18:14 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
I just want to get back to latest stable kernel of fedora 10. I'm not able from the grub to choose an older because there are only kernels for fedora 9. The problem was that previously I used fedora 9 however I upgrade it but it was still with kernel of fedora 9 so I pick it the unstable of fedora 10 and I installed it. Right now I just want to get back to current version of kernel in fedora 10 so I can upgrade it to fedora 11.
can't use catalyst driver, virtualbox refuse to run, selinux problems,I want to know if its possible to install only this new kernel 2.6.38 without "contaminating" the rest of my installation with unstable packages?
Since all what I can find on google is about benchmarks I'd like to ask you if a 64 bit kernel would be more stable , secure and reliable than a 32 bit one.
I ask this question because apparently the 64 bit instruction set offers more advanced security features (i'm saying apparently because I'm not able to give details since it been a really fast read) which would be used by a 64 bit Operating System (Apple also stated that 64 bit applications are less likely to be "attacked").
I have to assume that a 32 bit one does not use them right? Should I stick to 64 bit? (to be honest that "not for everyday" thing on ubuntu download pages made me wonder lol, because since intrepid i ALWAYS used the 64 bit version)
My "lowest" computer has a pentium processor (1,6 ghz dual core) according to lshw I have NX enabled and my ram is 2GB (might seem useless using a 64bit kernel on 2 GB but i'm more concerned about security now)
Can someone tell me which is the latest stable kernel version available in the repositories?? Is it 2..6.35-22 ??? if so, when will 2.6.36 be available??
I just ran "yum update" to download the latest kernel from the repository, and noticed that it's 2.6.18-164.11.1 while the latest on www.kernel.org is 2.6.32.4.Out of curiosity, why is there such a discripency between the two? Lack of resources to test and build binaries?
A few days ago yast did update my computer to a new kernel-desktop 2.6.31.12-0.1.1.
My mainboard is an ASUS P4P800-VM with Intel ICH5 chipset. This new kernel is not able, to poweroff my computer. Older kernels were able to poweroff the computer.
How can I roll back to the older kernel? Yast does only offer the recent kernel.
In /boot there are only files of the recent kernel.
ASUS P4P800 Intel Pentium 4 HT, 3000 MHz, Frontside 800 MHz/Cache 1 MB 3 GB Ram AGP nVidia 7600GS/512 MB, nVidia driver 190.53, installed from yast. PCI WLan TP-Link 951N (Atheros chipset, WLan N, driver ath9 was automatically installed)
I am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD 2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
I have a system running openSUSE 11.2 with Desktop and XEN kernel, as well as Windows 7 (not by choice though...). I have noticed a strange time issue, with Windows 7 and the desktop kernel the time is correct (like for example now: 1:32 PM) but in the XEN kernel it is ahead several hours (6:32 PM). If it was an issue between openSUSE and windows then I would think that it is a problem with the system clock but I don't know what would cause a time issue between kernels like that.
differences between Kernel Default and Kernel Desktop? I've found some past threads like this link and this other link, and some other google info, which suggest the only difference would be the io scheduler. Also, I see the default grub choice is "Desktop" and not "Default", so I take this as a suggestion to prefer one over the other.
However, my broadcom 4312 wireless only works on the "default" and not on the "desktop" kernel, so I guess there must be other differences. I just want to evaluate which one is the less long-term risk option to go.
I'm running OpenSUSE11.3 64bits with KDE 4.4.4 (release 3). Is it safe to upgrade to KDE4.6? Is KDE 4.5 better/more stable than 4.6? Why is both 4.5 and 4.6 developed? Why not go for one version?
I've just install debian squeeze version, or the testing one, but I am not really happy with it. Is not listening me all the time. If I install the debian stable I don't have internet connection. Is it possible to update the kernel somehow using the testing version?
I want to stay in KDE 4.4.5 for a while, while KDE 4.5 gets stable. But now the factory repo. is moving to 4.5, and the stable repo. stayed in 4.4.4., so now no repo has 4.4.5.
I'm trying to install some wireless drivers, but apparently I don't have a /lib/modules/<kernel>/build directory, which is causing the Makefile to throw an error. Is there a specific place I should point the Makefile at?
I had recently installed the kernel sources so that I could compile the VirtualBox kernel module to use well but I had not restarted afterwards. I had been using my system problem free until tonight when I decided to restart. I had no internet connection and through ifconfig showing only lo and ifup eth0 returning "device eth0 is not accessible", I discovered I had a bigger problem than at first thought. Then I discovered that no PCI devices other than video were working, and so I referred to /var/log/messages and discoverd a line stating that "/lib/modules/2.6.37.6-0.5-desktop/modules.dep : no such file or directory.
All other entries in that directory were some version of 2.6.37.1-1.2.
Unfortunately I had to end up reinstalling because witho
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
I was installing the kernel-pae, in the middle of the installation it said it couldn't resolve some dependencies. it ask me to ignore or cancel I chose to cancel there after my system froze.
I'm running 11.2 with standard repositories (plus packman). I want to install a recent kernel and then compile some variations of it (to investigate a hardware problem).
So I took these steps:
(1) add the 11.2 Kernel:/HEAD repository (2) enable multiversion in zypp.conf (3) use YaST software management to select the kernel development pattern
Note that at the moment, the standard 11.2 kernel ( 2.6.31.14-0.6-desktop) is in use and I have not selected any packages from HEAD. But it has installed 2.6.37-41.1 versions of all the kernel packages I didn't already have (source & docs etc) instead of the 2.6.31 versions. /usr/src/linux symlinks to linux-2.6.37-41 instead of to a directory for the running kernel!
(1) it should have loaded the packages corresponding to the running kernel (2) it's not supposed to switch repositories
Has anyone tried updating dbus in factory up to level 1.4 under openSuSE 11.3 x86_64 and continue to run KDE 4.4.4 Stable? Just wondering if it causes any issues or if it forces you to go to KDE 4.5.1 Factory. I've tried updating to 4.5.1 without, other thread, and the suggestion was to update dbus to 1.4 to correct speed issues.