I have downloaded the image of the current slackware ftp://ftp.slackware.at/slackware-cur...rs/usbboot.img
It is writen that one can make the pendrive using:
On the other hand how can we make this under WINDOWS XP (I have not yet slackware installed)?
I have made an pendrive with slackware and used the huge.s as indicated during the boot on /dev/sda1 for the pendrive, shall work; but it hangs displaying lot of lines ending with :
View 1 Replies View RelatedI have tried googling this thing but returns didn't fit my needed answers while I have very limited time staying on-line, so I try to solicit help here from those who have gone this way before.
My Need:
1. I need to boot and run Slackware 12.2 from an 8gig USB pendrive. <Regardless from where I install them: I can install and prefer to isntall it from a DVD/cdrom drive. But booting my Slackware DVD installer cannot see the USB pendrive which fdisk -l returns as 'sdb1-ext2, sdb2-ext2 and sdb3-swap' after falling into the console mode.>
2. I partition my usb-stick into 1.2Gig to mount as / then 5Gig to mount as /home and about 200+Mbs for swap. Things I have tried--
a) I have run Ubuntu 8 on a pendrive by a very simple way of doing it. There are links for that. But I don't like Ubuntu where it uses vfat on a casper drive, and also I cannot control the system the way I used to in Slackware. I deleted it.
b) I tried booting my Slackware 12.2 DVD installer but there is no way to find my usb drive when preparation phase came. I need a little help. I have lesser time now for tinkering things, being busy in my job.
What would I do to attain my objective quicker than being a scientist-experimenting-things? Is there a link for a fitting solution so that I can go and read from there?
It i plug the pendrive or insert cd to cdrom it will be automatically mounted. How would i do this?
I don't want to mount these manually from terminal.
i try to copy file to my pendrive it slow down the machine and when i try to open the other running application like browser it open slowly. My RAM is 2 gb. and Swap is 1.5 gb.
View 1 Replies View RelatedI have a Pen-drive which is affected by virus. I wish To format it, i tried to format it in GUI mode but i was unable to do so, then i tried to remove the files in pen drive by using rm command but an error msg that the file system has the read only permission so can't be deleted occur, then i tried to remove the read only permission by using chmod command but still the error that the file is read only permission was unable to change.
View 9 Replies View RelatedSo here is my situation..i was using win 7 and ubuntu 10.10 in my dell studio 1555. and i wanted to try out debian so i installed debian in my pendrive. so the grub was modified. when the computer starts it shows debian,ubuntu and win7 no problem.. but if i remove the pendrive, nothing comes up. it shows grub rescue>..
so now i cant start up unless i plug in the pendrive. what to do now to solve this problem?? i want to restore my grub to the previos state.
I am a using Windows xp. I had Started my Redhat6 tuition from some days,, My question is " How can I install redhat linux 6 from my pendrive? Please describe me all the steps cause I haven't try to install a O.S. from pendrive?
View 2 Replies View RelatedI would like to use half of my 16gb pendrive to keep files and the other to install linux. Is it possible?
View 7 Replies View RelatedI want to install RHEL4 from pendrive because of my dvd drive is not working. what is the procedure for that?
View 3 Replies View RelatedI was trying to install openSUSE 11.2 64 bits from the second partition of my 8GB USB pendrive.
Why? I want a dual data / emergency install pendrive without mixing my data with the install system.
As most people use MS Windows, and it's only able to mount the first partition of USB removable drives (without installing an alternative USB disk driver), I need the first partition to be the data partition for normal pendrive use.
Ok, I must say I've accomplished this with Ubuntu before without major problems.
Well, as of now, I've copied the ISO image contents to that second partition, installed Grub4DOS in the MBR with its corresponding custom menu.lst file, and made bootable the second partition.
When booting my system from the pendrive, the kernel was loaded without problems, but the boot process stopped with a message indicating that there was no device with MBRID = 0x8c71ad6e.
Ok, I ran fdisk from Linux and diskpart from Windows, and find the MBRID for my PenDrive is 0xed196ecb.
I've modified the /boot/grub/mbrid file with the actual pendrive MBRID, but the system refuses to boot with the same error (and with the correct MBRID).
Is it possible that the install system is only able (is hardcoded) to boot only from the first partition?
I want to install a OpenSuSE 11.2 in a no optical drive station. Obviously I have done a pendrive installation (following the steps in Live USB stick - openSUSE). Using Live images it works very well. But with the net install image, when I boot the station, nothing happen and it passes directly to the second boot device
View 1 Replies View RelatedI have a 8 GB flash drive and a 4.3 GB DVD iso (openSUSE-11.3) Is it possible to use the flash drive to install the linux? Pendrive linux universal USB installer formats it to Fat32 which limits the filesystem to 4 GB.
View 1 Replies View RelatedI know this can be done with install-grub command in recent ubuntu release. How can i install it from puppy linux or distro which does not use grub 2. Will my pendrive boot if i copy /boot/grub from ubuntu 10.04 live cd to /boot/grub of my pendrive?
View 5 Replies View RelatedI did a google search and found pendrivelinux.com/pendrivelinux-2008-install-from-windows/
If I install linux on a new 16GB SD chip that just arrived, can I use the above link and install bootable linux on it?
Can I then install the famouse oracle database server and java and eclipse once like it was a harddrive?
Apparently I have to use the "JauntePE Make Portable Apps" to modify existing applications. Is there an easier way?
Are there alternatives to pendrive linux? Do you like them?
I want to play media file on fedora 11 for this i want to install vlc player on it.. i have this player on pendrive..
View 3 Replies View RelatedI need to install mysql-server into a pendrive because i want to use a database into the pendrive..
I'm using debian, and i tried to put the var/lib/mysql directory into the pendrive, then i modified the my.cnf file with this string:
But now when i write "mysql -u root -p" i receice this error:
I think because i have to install mysql into the pendrive, isn't it?
I've recently been trying to install Kubuntu Live onto a pendrive but I'm having some problems. Situation is as so:- Installed Kubuntu 10.10 desktop to 4Gb pendrive via Universal installer 1.8.1.2, with 2Gb allocated persistence.
- Reboot PC, boot from USB into Kubuntu, no problems.
- Configure WiFi connection.
- Reboot.
- Error: NTLDR is missing
I've tried this several times, always with the same result. As soon as I reboot, boot loader appears to be missing. I've read here:[URL].. that there are problems with syslinux and Ubuntu's version and wondered if this was the problem, but plenty of people appear to be running with this setup.
Does anyone have any ideas what may be the problem (and apologies if this has already been asked, I'm struggling to find anything pertinent.) For info, the pendrive I'm using has a small partition that acts as a floppy drive, could this have any influence?
I have created the installation-usb by the command #dd if=opensuse-11.3-Gnome-LiveCD1.iso of=/dev/sdb bs=4M;sync from my laptop with debian-lenny OS and was trying to install opensuse on my netbook (NO optical drive) with Intel Atom. The BIOS of the netbook showed the booting priority
USB Memory
USB CD/DVD ROM Driver
Hard Disk Drive
Others.
After switching on the Netbook with the pendrive in the USB port the computer simply stopped proceeding further with the pendrive blinking on and on. So what shall I do?
Note: I am doing such setup for the first time so I don't know if there is a problem with given opensuse version or problem with what I am doing. System: openSUSE 11.4 RC1
Desired setup: entire system except /boot partition on hard disk, /boot partition on USB (pendrive). Aim -- making impossible to boot from hard disk, forcing boot from the USB (please, don't question my aim, I am just trivializing the issue here to shorten the description).
Setup: I set /home and / partitions on hard disk (/sda), /boot partition on USB (/sdb), I selected the options to Boot From Boot Partition as well as Boot From Master Boot Record. Finally I selected Boot Loader Options and selected Set active flag in Partition Table for Boot Partition. I installed the system.
What works:
a) without pendrive inserted I cannot start the system
b) with pendrive inserted GRUB menu shows up and system is ready to boot
The problem: after initial starting, there is long pause, and system switches to text mode with error:
Code:
drive "/dev/disk/by-id/id_of_my_pendrive" is not found Since the console worked, I logged in, and yes, actually there was not such disk found. But the disk (pendrive) was there -- the initial booting took place not from void, but from it. So why it is not present? Out of curiosity, I pulled it out, and plugged it in back, now it was visible in "dev/disk/. Question: what should I change/tweak for correct booting the system from pendrive? Or is a bug in 11.4 installer? I would like to setup everything as it should be done -- I mean within installer.
What I found so far: Booting encrypted system from USB stick - Gentoo Linux Wiki it is similar problem to mine, but only similar. I have other symptoms.
I have installed Ubuntu 10.10. Works good, but I would like to switch LTS-release-cycle. I can't burn CD, so I'm trying to install Ubuntu 10.04 without cd or pendrive. I tried to install Ubuntu 10.04, using Ubuntu alternate cd and grub loader: [url] but it doesn't work (bugs in kernel modules) Is it possible to downgrade Ubuntu 10.10 to 10.04 without burning cd? Can i create new partition and house the installation disk?
View 1 Replies View RelatedIs is possible to install Ubuntu Server 10.04 on USB Flash (pendrive) ?
I'm wondering could i create small dedicated server without hard drive.
I don't need high speed on "" drive.
I think i could mount home and all user data by NFS or iSCSI.
But question is about putting that on flash storage...
Any easy way to install in on pendrive ?
I just performed a clean install of Ubuntu 10.04 on my flash drive, allocating a 6.5 GB persistence file. Of course, the first thing I did after booting from it was to run sudo apt-get update and sudo apt-get upgrade. After a lengthy install process, I was eventually notified that several packages failed to upgrade. I rebooted and tried again, still to no avail. Now, whenever I install a new package or attempt to upgrade with apt-get, I receive the following or a simmilar output:
Code:
Setting up fuse-utils (2.8.1-1.1ubuntu2.2) ...
creating fuse group...
udev active, skipping device node creation.
update-initramfs: deferring update (trigger activated)
[code].....
I've put openSUSE several times in USB flash drives. I've used the old method with dd ... and the new one with dd_rescue ..., shown in SDB:Live USB stick - openSUSE This way a partition is created (sdb1 or sdc1 or ...), with the Linux file system (ID: 83). One of the problems of this system is that all the data of the pendrive is deleted. Another problem is that sometimes openSUSE doesn't load completely and I cannot use it. And another of the problems is that even if I create another partition (for example to make the Live USB persistent and "remember" the configuration of my computer) and I put some of my photos, songs, films there when I plug the pendrive in a computer running Windows XP I cannot access the data. (What about Vista and 7?)
Other Linux distros can be put in pendrives using the FAT file system (for example W95 FAT32 (LBA), ID: c). This way my personal data or files (photos, documents, ...) can be opened from a computer running Windows XP (and the personal data is not erased when putting the Linux in the pendrive). So I would like to know how to create a Live USB drive with personal files that are avaiable for many Operating Systems, including Windows XP. Perhaps the solution is to put openSUSE in a FAT file system, or put it in Linux file system but create another partition with FAT file system (for this openSUSE should avoid the 1st partition, sdX1, that should be for the personal data, so Windows XP can access it).
How to install ImageMagick on slackware? I can't run ./configure after I uncompress the file. I was trying to install a software and it says Imagemagick is not installed but when if I run identify -version there is some kind of version displayed but I'm not sure if it is installed.
View 3 Replies View RelatedI am trying to install the nvidia-drivers from Slackbuilds.org. When I try to run the SlackBuild, I get the following error:
Code:
install: cannot stat `cuda.h': No such file or directory
What am I missing?
The nvidia-kernel SlackBuild ran fine and created the kernel package.
Today i download cheops source code and when i type ./configure returns me this error :
Quote:
checking for gnome-config... no checking for gnomeConf.sh file in /usr/local/lib... not found configure: error: Could not find the gnomeConf.sh file that is generated by gnome-libs install Is there any way to install cheops in KDE ? Do you know any solution for this problem ?
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
I tried to upgrade my slackware xfce 13.0 >> 13.1. I read "man slackpkg" first, and then I did exactly what I read at the man pages, my system was in init 1 mode.
The mirror I used it was the Greek mirror for 13.1. The command slackpkg upgrade-all was running ok until the "r" letter after that all packages did not upgraded because it was ERROR CHECKSUMS.md5 to all of them. Slackpkg did not upgrade all this packages but just check them and them skip them.
When everything stopped I reboot but at loading time it stops and I have this message: "libuuid.so.1:cannot open shared object file: No such file or directory."
After that I have 2 options to press control-d to reboot or to give root pass and login as root@(none):
After I login I cant connect to internet, I cant shutdown the system only reboot it from cl, I even cant go to init 1 or anything else. I dont know if I can fix the problem but I have to try...
Code:
bash-4.1$ konqueror
konqueror: error while loading shared libraries: libfam.so.0: cannot open shared object file: No such file or directory
