Slackware :: Nvidia Graphics In Slack - Curent?
Apr 15, 2010
I am using nvidia fx 5500 graphic card and still have unresolved problems with graphic. At this moment I cannot set X window system to work properly. My first attempt after installing slack -current was to install nvidia's 'blob' driver. As it is know 'blob' conflicts with 'noveau' open source driver for nvidia cards. 'Blob' cannot install with noveau running. Thus I blacklisted 'noveau' and installed the 'blob'. After I restarted the computer it seemed it is Ok, but 1) it is really very hard to set the proper value of gamma correction, contrast and brightnest, 2) after logout the X server didn't restart and computer was 'dumb'.
I have some prerequisites to suspect the 'nv' X.org native driver for bugs, but I tested and driver is ok, however it is impossible to work wit this driver, it can only accomplish 60 Hz V. refresh,
[Code]...
Additionally: in fact I have to graphic devices - nvidia on AGP and VIA graphic onboard card (VT1344). BIOS points to AGP as primary graphic device.
View 10 Replies
ADVERTISEMENT
Apr 29, 2011
Have got slow bumpy - slow to load -slow to refresh graphics. Also noticed that when inittab 3 and doing a non graphical login for user startx wont work. Something about fbdev not loading.
logining in via kdm works for user. have tried placing an xorg.conf into /etc/X11 with what used to be ok for user to have dri.am using an radeon hd 2400 pcie graphic card. Also placed a file into /etc/X11/xorg.conf.d/100-dri.conf again with what used to work to get dri working. Is it me or is slackware graphics gone down hill since 13.0?
View 5 Replies
View Related
Nov 13, 2010
I've recently upgraded from Slackware 12.2 to Slackware 13.0 and so far everything works fine with one exception: the TightVNC package that comes with Slackware-13.0 (in /extra) produces a garbled desktop. Applications look fine, but the default desktop of 13.0 is corrupted. Restarting the VNC server doesn't solve the problem. Before the upgrade, I had 1.3.9 compiled from source. I have just installed the 1.3.10 package that came with Slack-13.0 on top of what was there, hoping it would overwrite old files as needed (couldn't find an automatic uninstall procedure for 1.3.9).
I have attached a printscreen. Notice the taskbar and the top left quarter of the screen. Firefox seems to be rendered properly though. Has anyone encountered this before or may have a clue what could be causing it?
View 14 Replies
View Related
Aug 24, 2010
I installed slackware 13.1 x86_64 bit with multilib, and its been about a month already, I'm really enjoying slackware but I am being troubled with my nvidia card, and I need to get my 3D acceleration working. And I've been looking around the net for information and kept on trying to make my nvidia card to work but to no avail. I cant get X to start, once I put in a xorg.conf stating to use the nvidia card. After troubleshooting for almost 2 weeks and now at my wits end, I now come humbly looking for help in linuxquestions slackware community forum.I've installed nvidia 64 bit kernel, drivers from slackbuilds (version 256.44). The laptop model I'm trying to get it working is an -ASUS K52J Intel Core i3 2.40Ghz with 2GB RAM and with an Nvidia Geforce 310M with 1GB dedicated VRAM.
View 14 Replies
View Related
Aug 13, 2010
I'm just about to install Alien Bob's multi-lib packages for Slackware64. Everything looks easy, but I've got a question about this part of the instructions:
Quote:
After installing the -compat32 packages, you may have to re-install your binary Nvidia or Ati video X.Org drivers. These driver packages contain both 64bit and 32bit libraries to be maximally useful on a 64bit multilib OS. If you installed the driver files for both architectures, the mesa-compat32 package will overwrite some of the 32bit library files.
On the other hand, if you originally only installed the 64bit driver libraries for your Nvidia/Ati card, it is recommended after installation of the multilib packages, to re-install the binary driver package. This time, choose to install the 32bit driver files as well.
The graphical 32bit applications that you are going to run on your multilib installation will require these 32bit driver libraries. Crashes are likely to occur if you fail to install the correct files.
Right now, I'm on pure 64-bit Slackware64-13.1, and I'm using the Nvidia driver from Slackbuilds.org (along with the nvidia-kernel and libvdpau packages from there too).
So:Do I have both 32- and 64- bit bindary drivers installed as part of the package from Slackbuilds.org?
Could I avoid all this hassle by simply not installing the mesa-compat32 package?
If I do need to reinstall the Nvidia binary driver, do I just upgradepkg --reinstall nvidia-driver-195.36.15-x86_64-1_SBo.tgz?
View 14 Replies
View Related
Apr 28, 2010
After installing "nvidia-driver" and "nvidia-kernel" through "sbopkg" I ran "glxinfo | grep -i nvidia" as user (not root) Shows: "Xlib: extension "GLX" missing on display ":0.0". GLUT: Fatal Error in glxinfo: OpenGL GLX extension not supported by display: :0.0" I'm really sure that there is a problem with this or error instead. Or is there any other way of installing nvidia..? "uname -a" "Linux purple 2.6.29.6 #2 SMP Mon Aug 17 11:58:18 CDT 2009 x86_64 Pentium(R) Dual-Core CPU E5300 @ 2.60GHz GenuineIntel GNU/Linux"
Quote:
Linux is not user-friendly. It _is_ user-friendly. It is not ignorant-friendly and idiot-friendly.
View 27 Replies
View Related
Apr 18, 2011
I have just reinstalled slackware on my old p4 3.2 box clean install formatted hard drive no other packages installed.is there something seriously changed from slack 10 to slack 13.1 ?? or do i suffer from C.R.S ( cant remember s***)
View 5 Replies
View Related
Oct 20, 2010
I have a Slackware 13.1/64-current system running the 2.6.35.6 kernel that I have installed the most recent nvidia drivers for (as of yesterday or day before) 260.19.12. If I boot up into run level 4 after running nvidia-xconfig in a console and run glxinfo as root I get:
Quote:
bash-4.1# glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
If I edit /etc/profile or /home/username/.bash_profile and add the following:
Quote:
export LIBGL_ALWAYS_INDIRECT=X
I have set both X=0 and X=1 as reported by [URL] I get the screen of information except it says
Quote:
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)
my lspci -v for the graphics card looks like this:
05:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device 2353
Flags: bus master, fast devsel, latency 0, IRQ 16
[code]....
I am sure I missing something from my xorg.conf but at this point I am not sure what I have been searching on this for days to no avail. From the log the only thing that looks like is a problem is it doesn't load the keyboard and mouse but it gets loaded later on in the file.
View 13 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Apr 26, 2009
I have a Packard Bell Imedia desktop with on-board ATI graphics. I also have a spare Nvidia PCI card. Is there a way I could use the Nvidia to run a second screen, if so how as the Nvidia and fglrx drivers seem to collide in a show stopping way!!I am running Kubuntu Intrepid, but have resorted to Gnome as KDE4 went spectacularly wrong on me.
View 5 Replies
View Related
Apr 18, 2011
I've install Slackware 13.1 and i cannot shutdown my PC. The shut down process stop while trying to run PCMCIA module.
This is the first time that happens.
From Hardware point of view , i didn't do anything at all (if that helps).
View 5 Replies
View Related
Dec 23, 2010
Anyone upgraded php to 5.3.x in slack 13.1?
Could you please share the slackbuild?
View 7 Replies
View Related
Jul 2, 2011
I installed a slack 13.7 on an old laptop. KDE was set as default desktop. then I login and run startx and I saw KDE first screen display. after that I saw blank screen with a mouse on it. Then it stayed there and it seems try read some in my harddisk since the persistent harddisk light.
View 3 Replies
View Related
May 2, 2011
When I try to put slackware to sleep or have it hibernate the system simply sits with a black screen. Normally it would do this for a short period of time immediately before the actual sleep state (screen powered off, croissant light on) is entered, but currently it does it indefinitely. My sleep USED to work just fine, it broke after some unclean shutdown or another, basically I just want to know what I can try resetting to try to get it back to normal.
Slackware64 13.1, running on thinkpad X61.
EDIT: Of course the second I make the post I think of trying to sleep/hibernate from the command line instead of through X/GDM (Gnome SlackBuild). That works.
View 1 Replies
View Related
May 2, 2011
I have some doubts about the official Pat's upgrading procedure. In the UPGRADE.TXT file, one of the stepts says:
Code:
upgradepkg --install-new *.t?z What does --install-new mean? Pkgs I have no installed on my 13.1 will be installed on the 13.37 upgrade? For example, I did not installed KDE on 13.1. Will be installed when upgrade? - What about third party pkgs? Slacky, SlackBuilds.org, compiled by myself. Should I remove them before upgrading slack?
View 10 Replies
View Related
Sep 1, 2010
Does it mean that a 64 bit version is not multi-core?
View 11 Replies
View Related
Dec 23, 2009
I have a XPS 1530 and when I type
lsusb
[code]
It seems to be that the camera is recognized by the OS but it is not working when I try to use it in skype or in EVO.
View 1 Replies
View Related
Mar 21, 2011
Has anyone here succeeded in getting armed slack running on a consumer kirkwood device .ie. one without serial console? I have a tonido plug that I want to liberate. By default the plug boots first from the external usb, so I would only need to set up / on the first partition. I would be very interested to know if someone had managed to install slack to the internal nand without bricking it.
View 9 Replies
View Related
Dec 18, 2010
I downloaded Qt SDK file (530 MB and file is ok ) qt-sdk-linux-x86-opensource-2010.05.1.bin, I type in console ( slackware ) like in manual for installation at site
Quote:
chmod u+x qt-sdk-linux-x86-opensource-2010.05.1.bin
but when I type second command for installation
Quote:
./qt-sdk-linux-x86-opensource-2010.05.1.bin
I get error message
Quote: bash: ./qt-sdk-linux-x86_64-opensource-2010.05.1.bin: cannot execute binary file How to install ?
View 7 Replies
View Related
Jan 30, 2010
I compiled it from source, i installed it via slackbuild but it didn't work. When i go imlib-config --version it shows me the old one, and when i try to install giblib it tells me that imlib2 is not installed. I watched the output from the installing of imlib2 and i realized something's wrong: there are several suspicious warnings :
[Code]...
View 10 Replies
View Related
Feb 8, 2011
I don't know if i'm doing anything wrong but, to change the bootsplash picture its just change the slack.bmp in lilo.conf and reboot?
View 6 Replies
View Related
Mar 18, 2010
my problem, I have Slackware 13 dual booted with vista on a dell 1545 2 ghz 2gig ram. to these forums I have gotten everything working except my creative zen vision M 30g. I have tried alll the suggestions posted here and other places on the net. Here is my output from lsusb.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
any way i can transfer files back and forth to this would be great since it does not work in vista either. and I am pretty sure 99.9% that I have all the libmtp, libnjb, and whatever other libs are needed installed but in gnomad it says no devices found on USB hub. I hope this is enough info and someone out there has the trick or maybe I am missing something obvious.
View 2 Replies
View Related
Jul 9, 2010
i installed compiz fusion on my slack 13.1 i installed in the good order all the packages nevetheless when i try to use DBUS in command line i don't have any response from compiz
here is one example
Code:
dbus-send --type=method_call --dest=org.freedesktop.compiz /org/freedesktop/compiz/switcher/allscreens/next org.freedesktop.compiz.activate string:'root' int32:`xwininfo -root | grep id: | awk '{ print $4 }'`but no reaction .what can i check to have a functionnal DBUS ?
View 3 Replies
View Related
Feb 26, 2010
I have downloaded the packages from Slackbulids and installed also the required packages from slacky.eu but still it says that probably pyqt is not installed. I have installet latest Sip and latest pyqt ver 4.
View 1 Replies
View Related
Apr 30, 2010
i know that there is a reset button on the back but after reset i dont know what to do with it. right now i m using pppoe connection which only works in windows and bt4 and i want to make it run in slack 'cause now slack is my main os(66hr since i switched to it :0) so i want to configure the modem in a way that i work in slack. and i m dumb about PPP/TCIP/DHCP and btw i like "the" slack
View 7 Replies
View Related
Jul 6, 2011
I like GNOME. So, I want to install gnome 3 as my desktop environment.
View 9 Replies
View Related
May 31, 2011
I installed slackware on my laptop last night, :-) very happy. Can't wait to learn more about linux and even computers in general. I've already learnt heaps since entering the alternative operating system world. Anyways, i've got xfce up and running with slack now, created a new user 4 my self. And now i'd like to get some updates and stuff, but i need to use my mobile broadband. It's a telsta dongle If that changes the circumstances. How would i go about setting this up?
View 2 Replies
View Related
Sep 4, 2010
I am trying to setup a PXE booting environment in my network and I almost got it to work... Only it does not quite work yet... Basically, I want my laptop or any other machines to boot from my network. I followed the instructions from AlienBob to do so. I setup my laptop to boot from the NIC, it automatically gets an IP from the DHCP server (pfSense);
I setup my gateway/DHCP server (pfSense) as is: -The IP address from the network boot server: 192.168.0.101 (the server where my slackware mirror and all tftp boot files are) -The filename used for network booting: /mnt/it-maintenance/tftpboot/slackware-13.1/pxelinux.0 (the absolute address of pxelinux.0 in my server)
I setup the network boot server (running slack 13.1) as is: -uncommented the line in inetd.conf to have:
Code:
tftp dgram udp wait root /usr/sbin/in.tftpd in.tftpd -s /tftpboot -r blksize
-added a NFS share to /etc/exports to have:
Code:
/mnt/it-maintenance/operating-systems/slackware-13.1
192.168.0.106(ro,sync,insecure,all_squash)
[Code]...
View 8 Replies
View Related
Dec 24, 2009
I am having problems getting Seamonkey 2 and 2.0.0.1 to run on Slackware 12.2. I have tried the packages for 12.2 in patches/packages/ and the package from the seamonkey website, both with identical results. Seamonkey appears to start, and does appear in the process list, however no windows appear and it uses little memory and no CPU cycles. No messages appear in the console if I start it from there. I have to kill the processes (seamonkey , run-mozilla and seamonkey-bin). I have tried removing my Seamonkey profile, with the same results.
If I try to build the slackbuild I get this error:
Code:
checking for cairo >= 1.8.8 freetype2 fontconfig... Requested 'cairo >= 1.8.8' but version of cairo is 1.6.4
configure: error: Library requirements (cairo >= 1.8.8 freetype2 fontconfig) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.
configure: error: ./configure failed for mozilla
/usr/bin/gmake -C mozilla default
gmake[1]: Entering directory `/tmp/comm-1.9.1/mozilla'
gmake[1]: *** No rule to make target `default'. Stop.
gmake[1]: Leaving directory `/tmp/comm-1.9.1/mozilla'
make: *** [default] Error 2
The version of Cairo I am running is the standard Slackware 12.2 version cairo-1.6.4-i486-1.tgz, which to my knowledge, has never been updated (there is nothing in /patches/packages for it, anyway).
View 5 Replies
View Related
Jun 9, 2010
I have myself a perfectly working slackware 13.1 64 on my pc (well, tbh I gotta solve some ati and kde compose issues),BUTI can get no joy when trying to make it work in friend's pc.The slackware 13.1 32 install runs ok. I can even log in and run a init 4 session on kde.But with no apparent reason hard crashes (completely frozen system) hit the system aleatory (never last more than 5 minutes)
View 14 Replies
View Related
