I am trying to install Playonlinux on slack 13.37 and I installed it through slackbuild. But when I try to run it, it hangs at this message:
Code:
bash-4.1# playonlinux
PlayOnLinux v3.8.12
Traceback (most recent call last):
File "/usr/share/playonlinux/python/question.py", line 21, in <module>
import wxversion, os, getopt, sys, urllib, signal
[Code]...
I used playonlinux for a manual install of a game that needs more than one cd. I can't eject to install the next cd in line. How do I unlock the drive? I'm now in the middle of installing.
View 2 Replies View Relatedi've installed playonlinux on my system ubuntu 10.04 , and it says that 3d acceleration aren't enabled , how can i do that , this is the output of : lspci | grep VGA VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
View 4 Replies View RelatedI have the CD game with the key, everything is legitimate. I am currently running Karmic (I can't upgrade to Lucid otherwise my wireless won't work!)
The installation according to the PlayOnLinux instructions seems to work well, but when I start the game it asks me for to insert the CD to proceed. Of course, the CD is already in.
There was a similar thread posted here more than 1 year ago, but it didn't seem to have resolution. I saw this: [url] and it looks like I'm supposed to install the No-CD patch in step 15, but I get an error message when I try. I am supposed to run that Play on Linux thing in step 15 from the terminal, right?
ok i have no net connected to my linux nor can i get any net connected to it so ive tried to install play on linux but it says i needed li8ke 6 files so i got them but it keeps saying when i try to install "python-wxgtk2.8" it says i need 2 packages, this being one of them ive downloaded like 10 different versions of it and it keeps saying i need the exact same file can someone link me to the earliest or something so i can just get playonlinux if needed ill give more details when i get home bout to goto school
View 4 Replies View RelatedI started up Playonlinx, go down to the starcraft 2 option and click apply or install and all it does is freeze up every time. Last time I installed starcraft 2 just through wine I had some in game issues that made it non playable.
View 4 Replies View RelatedYeah so I started up Playonlinx, go down to the starcraft 2 option and click apply or install and all it does is freeze up every time. Last time I installed starcraft 2 just through wine I had some in game issues that made it non playable.
View 1 Replies View RelatedI currently run a dual boot system Windows Vista & Ubuntu, I am trying to use the Playonlinux application in the software center, for those who may not know what this is, it allows you to install windows application (ie games) on your linux system.. but im getting an error when installing software, it keeps saying that there is not enough space on my HD to install then shows me the current amount of HD space that is availible, its only saying i have about 7gigs free, but i have well over 200gigs free on my HD, Im guessing that Ubuntu made a partition to install on, and it didnt make it big enough. (Just my best guess) Is there a way i can increase this partition size? without having to reinstall? or am i just totally off track and should be trying something else!
View 6 Replies View RelatedWhen I try to download software on playonlinux the program just freezes, and the screen glazes over. The program I am trying to download is internet explorer 7. I have wine. Do I have to have the files already on the computer, or is playonlinux supposed to download them.
View 2 Replies View RelatedI have down loaded: slapt-get-0.10.2h-i386-1.tgz I have read the install directions:
Quote:
- Using pkgtools: ----------------
To install:
$ make pkg
$ installpkg ./pkg/slapt-get-${VERSION}-${ARCH}-${RELEASE}.tgz
When I try make pkg, I get:
Code:
root@darkstar:/home/rob# make pkg
make: *** No rule to make target `pkg'. Stop.
I guess that I do not understand the instructions?
To an empty disk I installed:
1) Windows XP & then shrank it's partition to make room for OpenSuse) 2) OpenSuse with grub installed on the MBR (& then shrank the home partition & created a new root and home partition for Slackware 13.1). These two OSes dual-booted properly 3) Slackware 13.1 with LiLo installed to the superblock of the Slackware root partition (sda8). How do I get Slackware to be a 'working' selection on the boot menu?
You might be asking why would I want to this? I will tell you why. My wife. She has grown up using Windows. The jump from Windows XP to 7 wasn't as bad as I thought it would be for her. I just had to show her where things changed to for about 10-20 minutes and that was that.
I did a trial run with Ubuntu for about a month using Gnome and not her cup of tea. So now I did a search on the Internet and came up with a Gnome solution here is the link:
http://aminesoft.wordpress.com/2009/...ike-windows-7/
And a KDE link:
http://www.kde-look.org/content/show...content=104232
But both websites are oriented towards Ubuntu/Kubuntu. I am just wondering if this will work with Slackware???
My wife likes a speedy system almost as much as I do. She also like the Search field when you click on the Start menu in Windows 7, the taskbar at the bottom, the big red X in right hand corner of the windows.
I just hope I can go this route and change it to look like Windows 7. I will be very happy and so will my wife of course.
I have done several attempts to build a local mirror of Salckware 13.0. There are two problems: I have to wait very long for a connection, they appear error during a connection which broke it so I have to restart. Is there any other way to build mirror? I am using Alien Bob scripts. Never before happened something like that. The connections with common web pages (google, etc) work well. Maybe I should look for some other mirror than those listed in mirror-slackware-current.sh.
[code]....
I will be finishing my upgrade cycle to 13.1 and I am a very happy man! Slackware 13.1 is First Rate. I think it is very important that we support Patrick Volkerding so that he can continue to deliver our favourite OS to us. Slackware is PV's source of income. I just made a donation to Slackware using paypal (see the donate link in my signature), it works flawlessly. donate whatever you can: Make a donation using paypal, buy the CDs/DVD, buy a Slackware subscription, or pick up some merchandise at the Slackware store.
View 14 Replies View RelatedI'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
I seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies View RelatedI found program but they are tar.bz2 and tar.gz and they are not work on slackware. How can I make them tgz file. Last night I am download src2pkg but I don't know how to use it.
View 12 Replies View RelatedI've just install Slack 13 and had been looking into the website for configure info. What is my problem is the #xorgconfig does not start on my system. It says command not found. I had searched for answer on the web and found no answer so I post here for help. Is there anything else I need to install to get my intel graphic card display more then 1024 resolution?
View 7 Replies View RelatedWhat software is recommended to make backups of my DVD collection?
I used to use DVD43 in Windows, but now in Slackware I am not sure what is recommended for such a process.
Code:
useradd -u 8001 -g luc -p mypassword -s /usr/bin/bash -d /home/luc luc
Open another terminal:
Code:
luc[159-0]test> ssh luc@61.62.63.64
[Code].....
Jump back to the other terminal... Try SSH login... Success!
'adduser' works, 'useradd' doesn't. Why? I have read the man pages several times and can't find the error in my command line.
I have a similar problem with groupadd
This fails: groupadd -g 8001 staff
This works: groupadd staff
I've been googling and reading up on how to set build optimizations for my system, and after consulting the Arch Wiki, old threads here, and some mailing lists, I've concluded that the way to set CFLAGS, etc. is by putting this in /etc/profile:
Code:
export CHOST="x86_64-unknown-linux-gnu"
export CFLAGS="-march=native -O2 -pipe"
[code]....
I was trying to make a 64bit 2.6.36.2 kernel for my multilib slackware64 setup and when doing "make headers_install" I get this error
Code:
Is this because it's multilib/compat32pkg? do I need to go back to GCC for 64?
How can I make slackware startx whenever it starts instead of having to go login as root and type startx each time?
View 6 Replies View RelatedKernel 2.6, GNU (Slackware 12.0). sox 12.18.1
Code:
bash-3.1# file receive48.wav
receive48.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 48000 Hz bash-3.1# This file, I intend to make it mono. That is, to mix both channels. I know this is a piece of cake for sox. But exactly how do I do it?
I'm trying to use alien bobs usb wiki to make a bootable usb slack installer. the syslinux part was easy and worked fine but adding the package tree has proved a bit confusing, I was trying to use the cp and mv commands to get the immages from my slack 13 iso but I had stumbled accross a way of using the dd command and can't seem to find the information again.
View 3 Replies View Relatedi try installing postfix with mysql support but i've got errorr :
[code]...
how to fix it
Im trying to make a sort of slackware using LFS.In the first chapter I have to make the kernel-headers this way :
make mrproper
make headers_check
make INSTALL_HDR_PATH=dest headers_install
cp -rv dest/include/* /usr/include
Can I do these steps also with using a the source and src2pkg ?
I use Slack 13-32 with kde-431, but when in kde logout actually get out of the X-KDE ...I have that after leaving the kde, type "logout" at the command line ...How to make a real logout when exiting KDE in Slack?
View 12 Replies View RelatedI've finally got Konqueror working well enough to uninstall Firefox. The problem has been KHTML, which has big problems rendering modern web content with heavy scripting. a team of developers has been working on creating a webkit rendering engine as a modular Kpart for Konqueror. Kwebkit will probably be included with KDE 4.6, but for the moment it's something you have to install yourself. Here's what I did. First of all, these steps were all performed on a -current64 box with Alien Bob's KDE 4.5.3 package [URL] installed. I started out by installing kwebkitpart using the package available here: [URL]
At this point you can use kwebkit by launching Konqueror, going into View > View Mode and selecting Kwebkit. Trouble is, it's not going to be stable... Konqueror will crash constantly. In order to achieve stability you have to install QT4.7 or higher.
You can get the latest QT (4.7.1) here: [URL] You don't need the complete development environment; just get the framework. I'm assuming here that you have the Slackware source tree somewhere on your hard drive (mine is in /opt). You'll find QT in the /l directory. Save the existing source code somewhere else and put the code you just downloaded in it's place. Because the new source code has a different name you'll have to modify the script accordingly. I modified this line:
Code:
if [ -r $CWD/qt-$VERSION.tar.gz ]; then
tar xvf $CWD/qt-$VERSION.tar.gz || exit 1
Code:
if [ -r $CWD/qt-$VERSION-opensource-src-4.7.1.tar.gz ]; then
tar xvf $CWD/qt-$VERSION-opensource-src-4.7.1.tar.gz || exit 1
Code:
cd qt-$VERSION || exit 1
Code:
cd qt-$VERSION-opensource-src-4.7.1 || exit 1
By the way, I dropped into init 1 before performing the build:
Code:
init 1
I'm not sure that's really necessary, but I like to do that before doing anything that directly affects the GUI. Anyway, I then just ran the Slackbuild:
Code:
./qt.Slackbuild
It took a long time. After it builds you can go into pkgtool and uninstall the previous version of qt. Then reboot your box. I rebooted into init 3 so I'd have a working terminal if something went wrong with the new version of qt. But no prob; I booted into the terminal, logged in, startx and no sweat.
[code]....
I'm installing Slackware 13.1 on a Samsung N150 netbook and am stuck trying to make the special keys do their normal functions when using a virtual terminal, that is not under X. Under X + Xfce it can be done via Menu->Settings->Keyboard->"Application Shortcuts".
In essence the question is how to make a special key (example Fn+Up to increase screen brightness) run a command in the background.
Changed title and text to make clear that the command should not run in a virtual terminal but while the display is being used for a virtual terminal, that is after Ctrl+Alt+F2 for example.