There is a known bug with MySQL 5.1.42 that prohibits the QMYSQL driver from functioning properly. I finally found it on the MythTV bug tracker, which links it to the MySQL site. There is a patch available, but the bug was fixed in 5.1.43. To fix it on my system, I grabbed the all of -current/source/ap/mysql except for the actual source, and downloaded the latest version (5.1.44) from [URL].
View 2 RepliesA week or so ago I ran an aptitude safe-upgrade and while it was updating mysql I suffered a power-failure. Now, this never really happens in Holland but of course this once it happened at the worst possible time.
I've tried a lot of different things to get mysql working again, but am running into all kinds of problems. First mysql won't shut off properly (it does startup with the computer but I can't connect to it at all) during an aptitude purge. If I kill the process mysql seems to purge properly, but I guess this is not the case because I wasn't able to install it then.
Things seem to have gone a bit more smoothly this time, however:
Code:
snek@snek-server:~$ sudo aptitude install mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
'm running KDE and am not using any PIM stuff.I would like to avoid to start akonady and the related mysqld RDBMS.Any idea? There's nothing in the Settings to handle this.
View 1 Replies View RelatedI am looking for a way to set a default for new users for the akonadi mysql.conf file that is created for each user for the akonadi database. Usually this file contains a inno_db_log_file_size of 64MB. Because of this the database eats up 64MB storage even if its still empty. I would like to decrease this size globally for each "new" user since we have very tight storage restrictions on our NFS home directories now. And 64MB make up already have the quota each user has. So this is to much. where is this default mysql.conf file taken from?
I found hints that there used to be a /usr/share/config/akonadi/mysql-global.conf file that was simply copied but I cannot find such a file on my 11.4 system. It seems things have changed. how akonadis user specific mysql.conf file in ~/.local/share/akonadi/ is generated for a new user? How can I use my own template file here?
I do not want akonadi on startup. How do I disable it?
View 5 Replies View Relatedwhat to do about the report I have attached? I know people ask about this and have asked about it in other forums, and I've googled a little already. Point me in the direction of which thing or couple of things to focus on, anyways.
View 2 Replies View Relatedthe Akonadi server won't start correctly on KDE startup. I've not found the 100%-working solution for this problem yet. It seems like many Slackware users just remove the akonadi package Unfortunately, I don't have the access to my Slackware box right now, Here is what I've tried to do so far: 1) Make the mysql daemon executable:
[code]...
After doing those steps the Akonadi server still shows a window with errors on startup. As far as I remember the ~/.xsession-errors file contains an error like "Can't connect to local MySQL server through socket /home/alexander/<some path that I forget, sorry>/mysql.socket.
on a fresh install of slackware -current x64, the first thing that i did was download and install opera. now, whenever i start kde, and run opera, X crashes with lots of crazy errors, usually in the format of:
/usr/bin/akonadi*whatever* cannot connect to x server :0
/usr/bin/akonadi*whatever* has crashed too many times and will not be restarted.
and then i get spat back out at the CLI. opera works fine in the other Desktop Environments, and i'm posting from xfce right now, so i know its an issue with akonadi. i would like to use KDE as my default desktop, but i dont want to use it without all of its features
Kmail 1.13.2 Problem on startup, error is from nepomuk, data storage. "cannot find Redland backend, nepomuk is disabled until fixed. Also see the following error from the akonadi console:
100503 10:00:15 [Note] Plugin 'ndbcluster' is disabled.
100503 10:00:15 InnoDB: Started; log sequence number 0 31413862
100503 10:00:15 [Warning] Can't open and lock time zone table: Table
'mysql.time_zone_leap_second' doesn't exist trying to live without
[code]....
I'm trying to run kmail on Slackware -Current. Kmail starts then akonadi server runs checks.
Then follow many errors:
I've reinstalled MySQL and it seems to be working but there is this error repeatedly:
I've done some Google searches but I'm not able to find a solution to get akonadi to work.
[url]
Pam-mysql can not connect to the database and below are my configurations.
saslfinger -s Output:
root@mailbackup:/# saslfinger -s
saslfinger - postfix Cyrus sasl configuration Tue May 10 10:12:10 EAT 2011
version: 1.0.2
mode: server-side SMTP AUTH
-- basics --
Postfix: 2.7.2
System: Slackware 13.1.0
-- smtpd is linked to --libsasl2.so.2 => /usr/local/lib/libsasl2.so.2 (0x00007f74ebfb7000)
-- active SMTP AUTH and TLS parameters for smtpd --
-- listing of /usr/lib64/sasl2 --
-- listing of /usr/local/lib/sasl2 --
-- content of /usr/lib64/sasl2/smtpd.conf --
-- content of /usr/local/lib/sasl2/smtpd.conf --
-- active services in /etc/postfix/master.cf --
-- mechanisms on localhost --
I've installed MySQL using yum on CentOS 5. I'd like to upgrade mysql-5.0.77-4.el5_4.2 to MySQL Community Server 5.1.47. What is the best way to upgrade?
View 2 Replies View RelatedThis is a clean FC12 install but I did add a few repos to support chromium and adobe - pretty much as described here:
[URL]
This is what happens - I tried all the cleanup suggestinons with no effect. Anyone got any ideas please? Thanks...
[eric@zeppelin ~]# yum repolist
Loaded plugins: presto, refresh-packagekit
repo id repo name status
[code]....
I want to upgrade existing MySQL 5.0.77 version on CentOS 5 Red Hat Linux to MySQL 5.1.x. Is anybody have list of patches or upgrades to upgrade to MySQL 5.1.x?
View 6 Replies View RelatedI cant access my box after upgrading from fedora 13 to 15 i wasn't near the computer during the process and i don't know if it asked for user and password ,but its upgrade and it need to have my old setting so why i'm not able to log in at all , even not as root.
View 6 Replies View RelatedWhile upgrading (why did I do it?! 9.10 was working fine!) I got an lengthly error and now the computer won't boot. Error and then boot screen:-
Code:
Could not install the upgrades The upgrade is now aborted. Your system could be in an unusable state. A recovery will run now (dpkg --configure -a). Please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process
[Code]...
Computer won't startup after upgrade from Ubuntu 9 to 10.04 Lucid.
Upgrade performed through Update Manager.
Have repeated this exercise with the same result. (After failed first time, reinstalled v9 successfully. Waited a few weeks then tried updating to v10 again. Same unsuccesful result as last time I tried it.)
Got one error message during upgrade: "Missing resoureces. The Network Manager Applet could not find some required resources. It cannot continue."
Upgrade otherwise appeared to operate smoothly.
But:
When upgrade complete, and on restart, the following happens:
Gets to purple start-up screen fine. The dots tick away for a little while, the hard drive accesses, then goes to blank screen and all stops. Nothing. Keyboard doesn't work. Screen backlit, but no-one's home.
Restart again makes no differnce.
Machine: IBM Thinkpad X40
I was running Ubuntu 10.10 and I was having issues with graphics card drivers so I decided to try upgrading to Natty using my Internet. The download went fine, the installation went fine (I sat and watched the computer the whole time. When I tried to upgrade from 10.04 to 10.10 I had the same issue and ended up having to wipe my hard drive and start over from the CD). But right before the installation was finished, the screen went blank except for a tiny text-editing cursor and even the cursor froze. Also, the Caps Lock and the Num Lock lights were flashing in sync rapidly. After a while I forced it to shutdown and then restarted it. GRUB boots, giving me a list and the option to go to a command line, but if I select 2.6.38-8-generic or the recovery mode, it freezes and the lights flash as described above.
In other words, all I can get to is a very basic CLI through GRUB.
Upgraded from 10.10 on my tower (scratch built, AMD Phenom II X6 1090T 3.2GHz, 16 GB RAM, 2x Sapphire Radeon HD6870 1GB) and it seems to have gone very wrong.
At the final post-installation reboot I get BIOS post, a black screen that hangs around alarmingly long, then the Ubuntu splash screen, then another black screen that seems, if anything, even MORE black (don't know how that works, but that's how it looks - it's not OFF but it's VERY black) and a whole lot of nothing going on.
Tried Ctrl-Alt-F1 to get to a TTY session, no go, no reaction. Just my friendly black screen. Tried F2-F6 as well, same deal. Tried Ctrl-Alt-F7 through F12 on spec, also no response. So Control-SysRq-K... and I DO get a response - I get a black screen with a number in []s and SysRQ: SAK. No TTY. Still doesn't like Ctrl-Alt-F1.
No disk thrashing. Nothing but gently whirring fans and my error message.
-UPDATE I take it back, it finally gave me a TTY login.
So. Um. Any guesses what happened to my poor XWindows setup?
I have Debian Lenny 2.6.26-2-amd64 on an ASUS G50Vt laptop. I am using Iceweasel v3.0.6. I tried upgrading my flash player using the steps listed on [URL].. but the install fails after I try to install install_flash_player_9_linux.tar.gz. I receive this error: MD5 checkum mismatch failed: --install
View 2 Replies View RelatedP**sed right off now, tested this upgrade on two test systems before hand to make sure this would work.Upgrade my server from FC9 to FC10, it had two Encrypted XFS volumes on totalling 1.5TB of files which I don't have space to backup anywhere else.Have now upgraded and the Encrypted volumes are showing as not existing "volume name does not exist"
View 2 Replies View RelatedI,ve tried upgrade from F14 to F15 using preupgrade, but I run into serious problem. Preupgrade downloaded all packages without problem and prompt me to reboot. After reboot installation process went ok. It was upgrading cca 1650 packages. But installation hung around package 1600 (almost on end) with message that openjpeg-devel-1.4-6.fc15.i686 cannot be installed and only option to end installer. After reboot I ended up with "kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0)". It is still possible to enter grub menu, where I can choose upgrade to F15, but it fails again on that openjpeg-devel package. When I enter terminal after failure, I can see package is downloaded in preupgrade repo (and after moving somewhere else and running upgrade again it I got message that package is missing). Is there any possibility to skip this package installation or only option is fresh reinstall?
View 10 Replies View RelatedI'm running the 64 bit version of Ubuntu 9.10 on an AMD64 dual core platform with all the most recent upgrades installed. After the most recent Kernel upgrade version 2.6.31.20 the computer failed to boot correctly. Extremely slow getting to the desktop and a general failure to preload any programs that I load on boot. I had to uninstall and revert back to the previous Linux headers which solved the problem. If it makes any difference I have the machine setup as an apache2 server along with my standard desktop environment.
View 1 Replies View RelatedI ran the upgrade from ubuntu 9.10 yesterday and it's now a mess. Is there something I can do to refloat this ship?
The file download stage seemed to be working OK: I was watching it when it only had three minutes left to go. I went away and came back a few minutes later and the screen had gone black. OK I thought, this must be all part of the plan, so I went away and came back over an hour later: still nothing. I decided, perhaps foolishly, to press the power button and boot it up.
Eek! Now I get the following errors:
mounting none on dev failed: no such device
chroot:cannot execute /etc/apparmor/initramfs: no such file or directory
Then the message Ubuntu 10.04 LTS cruncher tty1 and a login prompt. I can log in OK but don't know what to do next to recover the situation.
Rather alarmingly there is some activity on the system: lots of messages beginning with a number like [22.71309.
I was upgrading my ubuntu(9.10)/xp machine to ubuntu(10.4)/xp . but there was a power failure and was running in backup for 15 min. But after that the system shutdown automatically. Now when i boot, grub appears and after selecting the ubuntu partition i get a error saying cannot find device.
View 1 Replies View RelatedI was happily running 10.04--- really worked fantastically! Then, I updated all, and upgraded to 10.10 using the upgrade manager in Ubuntu Desktop. Now, when I choose Ubuntu from the boot page, the computer shuts down--- no errors, it just reboots and I get right back to the boot page. I cannot boot into Ubuntu at all, and I am now stuck with Windows 7 once again.
View 5 Replies View RelatedI'm having a few problems getting my system to boot after upgrading to 11.04.This problem actually first arose when I upgraded from 9.10 to 10.04 a couple of weeks ago, however I found I was able to boot by loading a selecting a previous kernel version (2.6.31.22 was the latest version I could successful boot from) and as I was a bit busy with exams at the time I decided to leave it be temporarily as I at least had a functioning system.I upgraded from 10.04 to 10.10 and then finally to 11.04 today. The original problem persisted on the upgrade to 10.10 however I was at that point still able to boot using the older kernel version. On the restart after the upgrade to 11.04 however, the system now freezes when trying to boot from 2.6.31.22 or previous versions (the splash screen shows and then the system gets stuck on a blank screen with just a cursor visible, but remains responsive to mouse (cursor moves) and keyboard (goes into restart process on Ctrl-Alt-Del)).
I'm at a bit of a loss of what to do and would be massively grateful if anyone had any advice of where to start for a solution. I can access the system using a LiveCD - the output of the boot info script is attached.
At 4:00 pm on 4/1/2009 I accepted the offer to dowload and install a number of small improvements. This has always worked in the past. This time there were a few problems with the install, but I went ahead and rebooted. It stopped at grub, stage2.
I am now trying the rescue feature of my install CD. I will report on this later.
As for the always possible hardware failure, I have a raid setup, so I was not expecting this.
This post was originally placed in the src2pkg thread, just below.
But to avoid it being overlooked I am placing it in a new thread here.
I am using src2pkg v.2.0 with Slack 13.0 running kernel 2.6.29.6
In the past I used trackinstall to run 'make install' after configuration and compilation (using a makefile). Here's an example
of what happens when I use the current trackinstall that comes bundled
with src2pkg code...
I successfully installed Ubuntu 9.10 Netbook Remix on an Asus EeePC in a dual boot mode with Windows XP. Because the computer has no CD drive, I used a USB stick to download the files for installation. Twice now, after upgrading to a new kernel (2.6.31-17 and 2.6.31-19 I think), when rebooting after the upgrade and selecting Ubuntu from the operating system menu, I get a message:
sh:grub>
along with a notice about limited shell commands being available. The ls command results in:
(loop0) (hd0,3) (hd0,2) (hd0,1)
In trying some of the other commands, I get a message that a linux kernel isn't loaded. The computer still runs Windows fine - or at least as fine as Windows ever runs. I'd like to recover Ubuntu without doing another full installation.