After upgrading to 13.37 the german keyboard-layout in xfce (v4.6.2) can be set but won't be saved. After rebooting the keyboard starts with english layout.
View 6 RepliesGot a little problem with my keyboard layout (de -- German; all variants). Everything worked fine until a few days ago. I noticed that the tilde (usually accessible via [AltGr]+[+]) doesn't work any more. What it shows instead is the "bracketright". Even worse, almost every AltGr combination seems to have changed -- the brackets enclosing AltGr and + in the former sentence were achieved by "AltGR"+"�" (left) and "AltGr"+"+" (right). Here's what gnome-keyboard-properties looks like, when I select any German keyboard layout -- minus "insert", "delete", ... and the num block:
Not only has the tilde disappeared from its regular position, it can't be found anywhere on the keyboard. This holds true from the login screen to the regular workspace. Switching to tty1..6 or booting up a VM, everything works fine. I didn't touch anything which affects the keyboard layout -- or is dpgk-reconfigure fontconfig doing something like this? ^^
having problems with my keyboard layout since upgrade from F11 to F12. When I reboot and login into gnome I have to switch back to my layout as it has been set to USA default layout.
View 3 Replies View RelatedIn Slackware 13.1 I configured my keyboard layout via HAL as per the instructions in the Slackware 13.1 CHANGES_AND_HINTS.TXT file.Since I use a Norwegian keyboard it is setup as follows:
Code:
$ cat /etc/hal/fdi/policy/10-keymap.fdi
<?xml version="1.0" encoding="ISO-8859-1"?>
[code]....
I use several keyboard layouts all the time. In all previous versions of Ubuntu I could see which one is current. After upgrade it is not showing anymore -- there is just an irrelevant picture. If I click on it -- I see current layout name -- but not other layouts. There I need to select "Keyboard Preferences" in order to see others. Because I often switch between layouts -- this simple feature is VERY important. Why it is broken in Ubuntu 10.10?
View 1 Replies View RelatedI use Slackware 13.1. So far I chose during the installation of the system lat2a-16.psfu.gz font and my applications worked well in console mode. Now the same applications with the same font display gridded rectangles instead of some diacritical characters. In /etc/rc.d/rc.font I have standard setfont -v lat2a-16.psfu.gz command:
/etc/rc.d/rc.font:
Code:
setfont -v lat2a-16.psfu.gz
In /etc/rc.d/rc.keymap I have standard loadkeys pl2.map command:
/etc/rc.d/rc.keymap:
Code:
if [ -x /usr/bin/loadkeys ]; then /usr/bin/loadkeys pl2.map; fi
Standard setfont -v lat2a-16.psfu.gz command reports for some reason loading of the Unicode mapping table:
# setfont -v lat2a-16.psfu.gz
Code:
Loading 256-char 8x16 font from file /usr/share/kbd/consolefonts/lat2a-16.psfu.gz
Loading Unicode mapping table...
[code]....
I examined /etc/rc.d directory but I didn�t find the setting switching the console to the Unicode mode. The same with env and set commands outputs. I tried to overwrite Slackware 13.1 /usr/share/kbd/consolefonts/lat2a-16.psfu.gz with lat2a-16.psfu.gz file provided in kbd packages from Slackware 12.2 and 11.0 but the results were the same. I suppose the problem is caused by improper handling of the system settings by the kernel but I�m not sure.how can I get rid of Unicode console font and keyboard layout and come back to ISO-8859-2 font and keyboard?
I have installed slackware 64 current in my PC from an ISO CD I downloaded from one of the mirrors. Everything was all right exept I wanted to get the last upgrade doing : slackware update slackware upgrade-all When I tried to reboot I had a black screen after X server started. Then I decided to edit xorg.conf to it's default before I installed the NVIDIA driver. So I got my screen back. I reconfigure my desktop running NVIDIA setting to the resolution and font I prefer. But my keyboard layout is still querty when I configured it to azerty. When I run system settings and Regional & Languages I get an error :
Quote:
KDE keyboard Layout switcher closed inexpectedly....report this error....
How can I enter command key to change the keybord layout to French ?
Running Ubuntu Lucid Lynx, GNOME 2.3Keyboard Preferences utilityAdding any Spanish language keyboard layout makes my Alt_R not work in ANY layout! I see that it changes Alt_R to "Iso_L..." for all/both layouts, including USA layout. When I click "Reset to Defaults" it's fine again, USA layout shows Alt_R again. I've tried all the variants of the Latin American layout and the Spain layout and they all do the same thing.What is "ISO_L..." and what's going on?i DESPERATELY need my Alt_R to work!
View 2 Replies View RelatedI have installed opensuse 11.3 a couple of weeks ago in 2 computers and both suffer of the same problem.In my asus laptop, i have a german keyboard. It is correctly recogniced as german keyboard by ev-dev, i guess. (ev-dev managed). But i need to write some spanisch symbols too, like accents (á © í ³ ? ñ¬ ·hich in a normal linux, they do work. For some reason, after rebooting, or after some time of having it running, the keyboard layout resets to an invalid setup, here accents get not over the letter (?a ?e ?i ?o ?u), so i have to select my layout again in the gnome control center.
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
live in the German speaking part of Switzerland and therefore a Swiss German keyboardThere are only 3 different keyboard layouts: Switzerland, Switzerland eliminate dead keys/sun keysThe problem is: I desperately need the dead keys to type the be ?rall of the layouts have the dead keys eliminated so the only way is to use caps lock, but that's not all that great.
View 4 Replies View Relatedcan i still, change date and time, configure printer, scanner, listen to music, change the keyboard from english to german
View 1 Replies View RelatedI defined a variant to my keyboard layout (Italian) editing the file/usr/share/X11/xkb/symbols/it and adding this block:
Code:
partial alphanumeric_keys
xkb_symbols "itaro" {
[code]....
I'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
View 1 Replies View RelatedRecently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
View 2 Replies View RelatedI installed Ubuntu 11.04.
how to set the keyboard layout.
I keep using the rescue cd because whenever I choose a keyboard layout the system does not seem to keep it like that.
After rebooting it loads another layout and I can't find which keys to type in that unknown layout. So for the moment, my password is 'tt' because I know it will work in both layout.
I have a belgium azerty keyboard. For the moment the upper option in the keyboard layout screen is USA and the lower option is Belgium. Which is weird since I thought that the upper option was of higher priority. But at least it works like that. At least until I reboot I think
PS: the rescue cd has also a keyboard layout problem. I chose belgium and I end up with a usa layout.
I have an issue with Fedora 12, everytime I change the Layout of the Keyboard in: Preference/hardware/keyboard and logout It goes back to default.
If I remove USA and add french canada, when I logout and login it goes back to usa & fren canada legacy.
I tried just to remove usa but it comeback everytimes.
How can I change the keyboard layout to my language using command line? I'm running openbox.
View 2 Replies View RelatedI use 2 keyboard layouts. But when I change setting from the YaST interface in KDE, setting save only for the short time (may be some hours). Then I can't switch between layouts and have to use YaST again. What is it?
View 2 Replies View RelatedI recently got a new keyboard, and went with a Razer RZ03-0018. It's not working. I have Swedish as my default language, but it defaults to... enUS I believe. In System > Preferences > Keyboard > Layouts, I can't find the keyboard listed anywhere, and even though I have it set to "Swedish", I still get that weird enUS layout
View 3 Replies View RelatedI'd like to change around my keyboard layout a bit and can't figure out how. I'd really like to swap f1 and f7, f11 and f2, right alt and escape, backspace and caps lock, and a few of the letter keys. Is there any easy way to do this? (It's a confusing story about why I want to swap the f keys) Gnome, if it matters.
View 7 Replies View Relatedmy keyboard layout keep changing from windows to windows. When I am using my French keyboard, I set the keyboard to English and it doesn't make the change for all the open windows, despite having selected the "separate layout for each windows" unselected.Plus if I am in firefox with a French layout go to another windows and come back to the firefox windows, the layout is back to GBR.
View 4 Replies View RelatedI've got an odd problem with the keyboard layout options.
I use caps as an additional control, as set in Keyboard Preferences > Layout > Options. However, I recently came across an issue where Shift + Space does not send space, so I go into the options to set space at any level to fix it, and while the option appears to have been selected, there is no change in behavior.
Whats going on?
I recently decided to try out the Dvorak layout, and manually rearranged my keys today. For those who do not know:
Dvorak is a keyboard layout designed in the 1930's that is designed for comfort and speed. It is reported as being easier to learn than Qwerty, and more comfortable as well. Keep in mind that you can still type in Qwerty after you manually change your keyboard to Dvorak.
First, for those who want a Dvorak keyboard, you don't! You can rearrange the keys on your existing keyboard like I did. To do so, insert the dull end of a fingernail clipper (or other long, thing object) into the area between two keys on your keyboard. Be sure to unplug your keyboard first, or you might end up typing ksiwmvosioiwjefoakjsdfj;ls.xoqw, or worse, triggering a system shortcut.
Be sure to look at a picture of the current Dvorak layout first. Once you have removed the necessary keys, line up the male end of a key with the female end of the location it needs to be. Press down hard! You tap the key in its new location a few times before you proceed. Some of the keys on my keyboard were different. On my keyboard, the F and J keys and their slots were different than the rest of the keyboard. These keys sunk when pressed. To avoid this, I put these keys in upside down, as you can see in the first example.
Once you have placed all of the keys, plug your keyboard back in. Type something. You'll notice that everything is completely normal, except your keyboard looks like the something from Carmen Sandiego: Word Detective. In order to type in Dvorak, you will need to add the Dvorak keyboard layout. Doing so is simple. Go to System>Preferences>Keyboard. Go to the layout tab, and click "Add...".
If you are limited on screen space, or don't want to spend a century scrolling down to the bottom of the list, go to the "By language" tab, select English as the Language, and select USA Dvorak as the layout. If you want, you can disable "Separate layout for each window". Now, click on USA Dvorak and click "Options...". You will want to change Alt/Win behavior to "Meta is mapped to Win keys". Also disable anything under "Key(s) to change layout".
Now, click on "USA" in the notification area and notice that it says "USA2". You should now be able to type in Dvorak. Try typing something! Be amazed at how slow you are. Next, try out a keyboard shortcut. If you have Compiz, some of your shortcuts might not work. For those shortcuts that don't apply to Compiz, try rebinding them in Keyboard Shortcuts. To fix Compiz using Qwerty for shortcuts, press alt F2 and run this command:
Code:
compiz --replace --sm-disable --ignore-desktop-hints
Also, you should change the layout on your login screen next time you login. Don't want to type ekrpat, now do we? Unfortunately, after finishing righting this, I discovered Colemak...
I have an Ubuntu server running on a VM. I'm accessing this system mainly remotely, and usually with a console connection. I export the output of some applications (like Skype, Google Chrome etc.) to my Windows desktop, where I run Xming as my X server. Everything works pretty neat, but... I can't change the keyboard layout, because the applications are running on the remote machine. So is there a way to change the keyboard layout in CLI?
View 5 Replies View RelatedA few months ago I upgraded one of my Ubuntu boxes to 10.04.1 and haven't been able to switch keyboard layouts ever since. I have US and Russian Phonetic keyboards and used to be able to switch between them using the keyboard switching panel applet back when I was using Karmic Koala. Now the applet is gone and not even available in the list of applets.
I understand the applet has been removed in the new Ubuntu. But why? And what other means of switching keyboard layouts are available now?
The trouble is that I have never been able to switch layouts without the applet -- none of the keyboard shortcuts I tried under Preferences > Keyboard > Layouts ever worked in any version of Ubuntu. Now I can't even test the Russian layout inside the Layouts tab, i.e. when I select Russian Phonetic and type something in the test box below I keep getting US layout characters.
i have ubuntu installed on my vps and when i open terminal or office to write something i type for example a i then get f on the screen?
i go to keyboard preferences and add my country layout which is sweden ..but it doesnt change even after that.
How can I view the keyboard layout? Sometimes I need to write things in a different language, and I can't find the keys that go with certain symbols. How can I view the keyboard map? In Ubuntu this is easy, but I can't find anything in Kubuntu.
View 2 Replies View RelatedI made the mistake to install Ubuntu 11.04 without trying it first from a live usb. After 15 minutes switched to classic theme (Unity seems to netbook oriented and confusing to me). After 2 days I am about to go back to my beloved Ubuntu 10.10.
I added some keyboard layouts and also specified alt+shift as the command to switch between layouts. Unfortunately it is not working!
Just recently started to use ubuntu live usb 10.10, Everything is good except some of the symbols such as the # is not the same as it appears on my keyboard, I was not asked for keyboard settings only when I boot up what language I want to use and if i would like to make a full install
How do I configure the keyboard layout?
I use Puppy Linux 5.1.1. My keyboard layout is US but I want it to be UK (GB). I have used the mouse/keyboard wizard (Choose keyboard layout for your country) in Setup and made all the right choices but nothing changes. In the 'Advanced Xorg keyboard configuration', when I choose 'layouts', I am told 'Your xorg.config file does not contain any Xkb layout options'.
What else can I do?