i have ubuntu installed on my vps and when i open terminal or office to write something i type for example a i then get f on the screen?
i go to keyboard preferences and add my country layout which is sweden ..but it doesnt change even after that.
I'd like to change around my keyboard layout a bit and can't figure out how. I'd really like to swap f1 and f7, f11 and f2, right alt and escape, backspace and caps lock, and a few of the letter keys. Is there any easy way to do this? (It's a confusing story about why I want to swap the f keys) Gnome, if it matters.
View 7 Replies View RelatedMy R key isn't working anymore. I use Karmic Koala.
The keyboard preferences is set up for different languages, but that's not my problem.
I'd like to make it so when I type the key to the left of 1 (the one that types out ` and ~) that it types R.
I'm rly poundering on the following problem. For our school assignment we need to make a liveCD (just a part of the assignment). I've stripped down a default ubuntu 9.10 . But I need to default keyboard layout to be azerty (belgium). When I run the liveCD in virtualbox and do dpkg -reconfigure console-setup it's all good.
But when I do it in chroot to change the liveCD, it gives an OK etc but when I pack it into an ISO again and run it ... Again US keyboard layout. Even on startup when I change the keymap it doesn't change to azerty... I rly don't know what to try now..
This was a fresh install of 10.04. I set the keyboard for UK Intl for use with a cordless keyboard. The keyboard turns out to be incompatible with 10.04, because it does not type the ' and " signs correctly. I tried another cordless keyboard with the same result. I gave up and attached a plug in usb keyboard which has a USA layout. I added USA International layout and set to apply system wide.
The problem is that whenever the computer is shut down and restarted it reverts to the UK setting, and even though I'm using a USA keyboard it still does not type the ' and " signs correctly. Can I fix this without doing a full re-install?
I have Ubuntu Natty installed and I'm using German keyboard layout. If I try to change using CTRL-ALT-F1 into terminal then I have US keyboard instead of German. Howto change keyboard layout in the Terminal?
View 2 Replies View RelatedAt first, I've installed the desktop version (Gnome desktop environment) with a German keyboard (u know, "y" and "z" is swapped, etc...) and everything turned out to be fine.
The problem comes when I want to use a normal en-US layout keyboard to replace the German keyboard.
I simply did: System Settings --> Hardware --> Keyboard and in the "Layouts" page I "Remove" the German layout and "Add" the USA layout. I even clicked the "Apply System-Wide..." button...
Things work out fine for the current session.
But each time after a restart/log out the default layout will go back to German although the USA layout still exists in the "Layouts" page. And also in the console I can tell the layout is still German.
How can I change the keyboard layout to my language using command line? I'm running openbox.
View 2 Replies View RelatedI use Puppy Linux 5.1.1. My keyboard layout is US but I want it to be UK (GB). I have used the mouse/keyboard wizard (Choose keyboard layout for your country) in Setup and made all the right choices but nothing changes. In the 'Advanced Xorg keyboard configuration', when I choose 'layouts', I am told 'Your xorg.config file does not contain any Xkb layout options'.
What else can I do?
I have Debian running in Russian and English. The Russian keyboard layout isn't the typewriter standard, which I know and much prefer to the one it gives me.
NOTE: I am NOT using KDE or gnome. (ratpoison is my windows manager.) I need to solve this via CLI-based solution, I want it to affect the keyboard I get both in ratpoison and in a basic CLI tty (when I'm not in X).
I need to change my keyboard layout from Arabic to USA. I cannot login to my machine, however I can access its files via a live session.
Is there a text file I can edit that will change my keyboard layout.
I am running Ubuntu 8.10 with a Gnome desktop.
I have tried editing /etc/X11/xorg.conf and this did not work.
If I switch using CTRL-ALT-F1 to the console, then I have other keyboard layout than under Gnome Desktop. Howto change console keyboard layout?
View 5 Replies View RelatedI am using openSuSE 11.3 and LXDE.
How can I switch between British-English layout and Greek layout in LXDE?
I've installed fedora10 on my virtual machine under a OpenSuse10.3. When installing i ve chosen English language and French layout for keyboard. But any time i run fedora my kb is English and i cannot find how to change it
How can i do it using shell?
I installed server 10.10, but it has the wrong keyboard layout. Can i change it to swedish via ssh, because the keyboard preferences wont start via the vnc?
View 1 Replies View RelatedKeyboard layout control's icon doesn't change when different input language is selected. Is there any way to make it behave similar to Windows?
View 1 Replies View RelatedWhen I installed Debuntu i picked US as my country, and now when i try to change region/language/keyboard-layout to norwegian, Debuntu only suggests english. How can i install the Norwegian language pack to debuntu?
View 2 Replies View RelatedHow can I change the third level of the 1 (one) key to umlauted a using German Dvorak layout?
View 1 Replies View RelatedI installed Gnome 3 Classic but I can't change my input source.in Gnome 3 I can but in Classic version I can't. In Gnome 3 I can see it beside the Clock but In Gnome 3 Classic it doesn't exist. How can I enable it?
View 0 Replies View RelatedRunning Ubuntu Lucid Lynx, GNOME 2.3Keyboard Preferences utilityAdding any Spanish language keyboard layout makes my Alt_R not work in ANY layout! I see that it changes Alt_R to "Iso_L..." for all/both layouts, including USA layout. When I click "Reset to Defaults" it's fine again, USA layout shows Alt_R again. I've tried all the variants of the Latin American layout and the Spain layout and they all do the same thing.What is "ISO_L..." and what's going on?i DESPERATELY need my Alt_R to work!
View 2 Replies View RelatedI have installed opensuse 11.3 a couple of weeks ago in 2 computers and both suffer of the same problem.In my asus laptop, i have a german keyboard. It is correctly recogniced as german keyboard by ev-dev, i guess. (ev-dev managed). But i need to write some spanisch symbols too, like accents (á © í ³ ? ñ¬ ·hich in a normal linux, they do work. For some reason, after rebooting, or after some time of having it running, the keyboard layout resets to an invalid setup, here accents get not over the letter (?a ?e ?i ?o ?u), so i have to select my layout again in the gnome control center.
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
having problems with my keyboard layout since upgrade from F11 to F12. When I reboot and login into gnome I have to switch back to my layout as it has been set to USA default layout.
View 3 Replies View RelatedI defined a variant to my keyboard layout (Italian) editing the file/usr/share/X11/xkb/symbols/it and adding this block:
Code:
partial alphanumeric_keys
xkb_symbols "itaro" {
[code]....
I'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
View 1 Replies View RelatedRecently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
View 2 Replies View RelatedI installed Ubuntu 11.04.
how to set the keyboard layout.
I keep using the rescue cd because whenever I choose a keyboard layout the system does not seem to keep it like that.
After rebooting it loads another layout and I can't find which keys to type in that unknown layout. So for the moment, my password is 'tt' because I know it will work in both layout.
I have a belgium azerty keyboard. For the moment the upper option in the keyboard layout screen is USA and the lower option is Belgium. Which is weird since I thought that the upper option was of higher priority. But at least it works like that. At least until I reboot I think
PS: the rescue cd has also a keyboard layout problem. I chose belgium and I end up with a usa layout.
I recently got a new keyboard, and went with a Razer RZ03-0018. It's not working. I have Swedish as my default language, but it defaults to... enUS I believe. In System > Preferences > Keyboard > Layouts, I can't find the keyboard listed anywhere, and even though I have it set to "Swedish", I still get that weird enUS layout
View 3 Replies View Relatedmy keyboard layout keep changing from windows to windows. When I am using my French keyboard, I set the keyboard to English and it doesn't make the change for all the open windows, despite having selected the "separate layout for each windows" unselected.Plus if I am in firefox with a French layout go to another windows and come back to the firefox windows, the layout is back to GBR.
View 4 Replies View RelatedI've got an odd problem with the keyboard layout options.
I use caps as an additional control, as set in Keyboard Preferences > Layout > Options. However, I recently came across an issue where Shift + Space does not send space, so I go into the options to set space at any level to fix it, and while the option appears to have been selected, there is no change in behavior.
Whats going on?
I recently decided to try out the Dvorak layout, and manually rearranged my keys today. For those who do not know:
Dvorak is a keyboard layout designed in the 1930's that is designed for comfort and speed. It is reported as being easier to learn than Qwerty, and more comfortable as well. Keep in mind that you can still type in Qwerty after you manually change your keyboard to Dvorak.
First, for those who want a Dvorak keyboard, you don't! You can rearrange the keys on your existing keyboard like I did. To do so, insert the dull end of a fingernail clipper (or other long, thing object) into the area between two keys on your keyboard. Be sure to unplug your keyboard first, or you might end up typing ksiwmvosioiwjefoakjsdfj;ls.xoqw, or worse, triggering a system shortcut.
Be sure to look at a picture of the current Dvorak layout first. Once you have removed the necessary keys, line up the male end of a key with the female end of the location it needs to be. Press down hard! You tap the key in its new location a few times before you proceed. Some of the keys on my keyboard were different. On my keyboard, the F and J keys and their slots were different than the rest of the keyboard. These keys sunk when pressed. To avoid this, I put these keys in upside down, as you can see in the first example.
Once you have placed all of the keys, plug your keyboard back in. Type something. You'll notice that everything is completely normal, except your keyboard looks like the something from Carmen Sandiego: Word Detective. In order to type in Dvorak, you will need to add the Dvorak keyboard layout. Doing so is simple. Go to System>Preferences>Keyboard. Go to the layout tab, and click "Add...".
If you are limited on screen space, or don't want to spend a century scrolling down to the bottom of the list, go to the "By language" tab, select English as the Language, and select USA Dvorak as the layout. If you want, you can disable "Separate layout for each window". Now, click on USA Dvorak and click "Options...". You will want to change Alt/Win behavior to "Meta is mapped to Win keys". Also disable anything under "Key(s) to change layout".
Now, click on "USA" in the notification area and notice that it says "USA2". You should now be able to type in Dvorak. Try typing something! Be amazed at how slow you are. Next, try out a keyboard shortcut. If you have Compiz, some of your shortcuts might not work. For those shortcuts that don't apply to Compiz, try rebinding them in Keyboard Shortcuts. To fix Compiz using Qwerty for shortcuts, press alt F2 and run this command:
Code:
compiz --replace --sm-disable --ignore-desktop-hints
Also, you should change the layout on your login screen next time you login. Don't want to type ekrpat, now do we? Unfortunately, after finishing righting this, I discovered Colemak...
