Slackware :: Custom Kernel Not Boot After Current Lastest Update / Sort It?
Mar 2, 2010
After the bunch of updates with current, my custom kernel (2.6.33) can't boot.
The error is:
/sbin/e2fsck: No such file or directory while trying to open /dev/sda6
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate
superblock:
e2fsck -b 8193 <device>
The /dev/sda6 is ext4 and is ok since it can boot with official huge smp kernel 2.6.33.
My custom kernel can boot before this bunch of updates in current.
What i missing in kernel?
View 18 Replies
ADVERTISEMENT
Feb 10, 2010
I am running Slackware64-current(multi-lib) and I have stumbled across something that I don't fully understand.I have read that the kernel-headers should not be updated as glibc is compiled against them and therefore requires that set of kernel headers. Recently the kernel version has been bumped a couple of times but glibc has stayed the same.Should glibc be re-compiled each time there is a kernel update?
Perhaps someone can explain, in very simple terms, the relationship between the kernel, the kernel headers, the kernel modules and glibc.
View 14 Replies
View Related
Jan 5, 2010
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies
View Related
Apr 12, 2011
Hello, i recently update the kernel in fedora through the GUI update manager and after restarting the new kernel wouldn't boot and i had to reboot into the old one. it freezes right after Plymouth finishes and the login screen should show up it just completely freezes, i do have proprietary nvidia drivers could it be that?
View 9 Replies
View Related
Feb 8, 2010
Update manager reported some updates including kernel update to version 2.6.31-19.
after update system won't boot. it crashes into bash shell. I've manually loaded kernel version 16 with following command code...
same thing happened when version 17 came up. I definitely NEVER again going to update kernel. What do I need to do now? should I uninstall latest kernel...if that is possible?
View 2 Replies
View Related
Jan 26, 2010
I have just updated current to get the new kernel and things seem to have gone just a little wrong.After upgrading i edited lilo.conf and ran all seemed fine so i rebooted to find my pc wont boot it cannot find modules and there will be trouble ahead it think it says (will check the error and add it).So i thought no problem i can just boot from an old disk i have laying around and fix it from there. I only had the 12.2 install disk or ubuntu 8.10 live cd neither of witch support ext4 which i stupidly decided to format my drives in.
Anyways i now have a ubuntu 9.10 disk and have booted and try to fix things but am miffed at whats going on. If i chroot into my slack root and look in my /boot there is only the old files before the update, but if i mount the drive in ubuntu there are the new files from after the update.What has happened and how can i fix it? It has just occurred to me i could use a tmp dir and copy the correct /boot files there then in the chroot copy them to /boot may work ?
View 14 Replies
View Related
Dec 24, 2010
I switched today to slackware-current on one of my desktops to play with it and ran directly into a problem.
Since ages my lilo.conf has two entries for slackware. One for runlevel 3 and one for runlevel 4.
Code:
Since the upgrade this is no more possible because I get a kernel panic as soon as udevadm trigger is called. The stack says something about an unknown boot option. Because that i removed the append lines from my lilo.conf and i was able to boot the system. The crash happens when udev is called from within the ramdisk and afterwards. I tried both.
My question is now. Is this a bug in udev or expected? I have this setup since at least 5 years and had never problems with that. What do I have to do to be able to select the runlevel at boot time?
View 3 Replies
View Related
May 18, 2010
Need to know how to create a custom initrd boot splash for slack current
it would be nice to have a seperate one for bootup/shutdown
anyone know how-to or where to find good info?
View 2 Replies
View Related
Jan 20, 2010
I have one machine where I have several versions installed on different partitions. The base partition (/dev/hda1) is Slack 12.1. On a spare partition (/dev/hdc4) I had installed Slackware64-current. Last week I slackpkg upgraded and installed the 2.6.32.2 kernel, and now that partition will not boot. I know that with the new kernels the hd* designation has been removed, and have already redone that fstab (accessing it from a different boot) to reflect the sd*. Here is the slack64 section of my lilo.conf:
Code:
# Linux bootable partition config begins
image = /other/spare4/boot/vmlinuz
[code]....
View 4 Replies
View Related
Feb 20, 2010
I just installed the latest kernel today and reinstalled the nvidia driver using " nvidia driver in F12 using the run method." [url]
I boot in X properly and then the automatic bug reporting tool icon showing witht he following error:
View 6 Replies
View Related
Nov 8, 2009
I am trying to update my fedora 8 kernel, is there a way to do that? I build the one of kernel.org but when i want to boot it a get a lot of messages like:
mount: cant find /dev/root
I tried to follow the guide at building a custom kernel for fedora, but thats just for the last supported version of the kernel of fedora 8.
View 3 Replies
View Related
Feb 12, 2011
I have a custom built 2.6.37 kernel where I have most of my devices compiled into the kernel. The only modules are related to nouveau (in case I want to go back to proprietary nvidia) and sound drivers. Everything seems to be running fine. However, in /proc/acpi, I'm missing a number of entries, such as thermal_zone/, dsdt, etc. I do have ac_adapter/, battery/, button/, event, processor/ and wakeup. I've gone through what I think is a very detailed review of my kernel config, and I can't find where I've missed something ACPI related. Here is my kernel config with the ACPI section.
Code:
# Power management and ACPI options
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_NVS=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y .....
View 12 Replies
View Related
Jun 26, 2011
I compiled my own custom kernel for the first time. I tinkered with different options, nothing to difficult. I actually didn't expect it to work the first time.
I had kept the original lilo boot config just in case something was to go wrong. Now when I try to boot the system, I always get a "VFS: cannot mount root system on (8,3)". I googled this and found that my kernel did not support my root filesystem (btrfs). So I made an initrd with btrfs kernel module, but it didn't help. I then got a string of errors about how /dev could not be mounted.
My question is two-fold. First, how come when I configure the system back to when it was first installed, it still won't boot? Im using the same kernel (2.6.37.6-smp). Second, how can I get myself out of this rut without reinstalling?
lilo.conf
Code:
lba32
append=" vt.default_utf8=0"
boot=/dev/sda
vga = normal
# Linux - Slackware
image = /boot/vmlinuz-huge-smp-2.6.37.6-smp
root = /dev/sda3
label = Linux
read-only
BTW, I have been maintenancing the system by chrooting into the device off of my slackware boot disk. Im on slack 13.37
View 3 Replies
View Related
May 1, 2011
I tried to update to the latest update 11.04 I think? and I after the upgrade my computer only shows the wall paper and nothing else. I can press crt+alt+del and turn it on and off and realized that I could press the help button on that menu and get "get up online" to boot up Firefox, but other than that I can't do anything. I thought I saw some possible solutions but I can't even try them since I have no way of getting to the terminal.
Other Info: Accer AspireOne running the Netbook Remix...
View 1 Replies
View Related
May 20, 2010
I attempted to upgrade a Slackware 13.0 fresh install to current. First I updated 13.0 by running:
Code:
slackpkg update
slackpkg upgrade-all
I then amended the mirror to current and ran the following commands
Code:
slackpkg update
slackpkg upgrade-all
[Code]...
View 9 Replies
View Related
Jan 9, 2010
I just upgraded my Slackware64-current version to the latest kernel 2.6.32.3. Almost everything works just fine, except that I have no sound on the command line and in web browsers, anymore. I don't get any sound out of the command line program play and Flash.
For example, I have a few .wav files, that I can play with Kaffeine and Amarok, but when I try to play them with play on the command line, the program runs and displays that it plays the file, but I don't hear any sound. The same happens with XMMS, too: It displays the usual graphics showing the dynamics and the progress, but my speakers remain silent.
Also, alsaconf doesn't detect my audio hardware, anymore. I have onboard sound and a Creative X-Fi PCI card. Usually both were "seen" by alsaconf. Now it tells me, that it can't identify any audio cards.
On the other hand, when I go into the multimedia section of the KDE system settings, I can "Test" the audio hardware, and the onboard sound works great and I can hear the KDE welcome sound. I have already remove all packages withe 'alsa' in their name and re-installed them, including their compat32 peers, and rebooted several times. Up to now to no avail. Does anyone have a clue, what the problem is caused by?
View 10 Replies
View Related
Dec 3, 2010
after i update to -current 30 nov, inkscape cannot run. Code: inkscape: error while loading shared libraries: libMagick++.so.3: cannot open shared object file: No such file or directory and there are other error (friends of mine problem) inkscape in slackware. this is the error
Code:
(inkscape:9005): Gtk-CRITICAL **: gtk_misc_set_alignment: assertion `GTK_IS_MISC (misc)' failed Emergency save activated! Emergency save completed. Inkscape will close now. If you can reproduce this crash, please file a bug at www.inkscape.org with a detailed description of the steps leading to the crash, so we can fix it. Segmentation fault
View 10 Replies
View Related
Feb 16, 2011
I'm in a bit of a pickle here:
After upgrading to current, I lost my video ... On boot I see the console until missage like this code...
View 9 Replies
View Related
Mar 18, 2011
I was using the Slack 13.1, and when I change the mirror to Current and upgrade (and reboot after this) my Slackware stops in the Message "Loading Linux" and makes a million of beeps.
View 3 Replies
View Related
Mar 5, 2010
I am running CentOS 5.x and want to yum update, but I do not want to touch the kernel. How can I exclude the kernel update and prevent yum from removing my current kernel?
View 3 Replies
View Related
Aug 7, 2010
After updating to kernel-2.6.33.6-147.fc13.x86_64 (and updating all kmods) VirtualBox guests no longer boot.
I had a Windows guest (from now on refereed as Crapdows) that worked normally. After the update, I could get to the "Start Windows Normally" screen, but then Crapdows refused to boot. At first, I thought it was a crappy M$ bug, but after creating another VM (Doublecrap), and starting from scratch, I was able to get to the "Windows is loading files" screen, and then the guest hangs again.
This problem is generalized to all OS'es I've tried. In Ubuntu, I can get to the language selection screen before the installation freezes. The same applies for Fedora and SUSE guests.
Is it time to get my hammer?
View 4 Replies
View Related
Jan 19, 2011
Using hd3200 on a lenovo edge 13.
followed this guide to install catalyst 10.12 and everything went fine and drivers got loaded.
Just updated the kernel to the latest version(2.6.35.10-74.fc14.x86_64) and after the reboot, the screen is just blank.
View 4 Replies
View Related
Jun 5, 2010
this isn't so much slackware specific as it is general linux related, but using the default huge slackware kernel included with 13.1, acpi reports cpu temps of about 55 celsius i always like to run my own kernels though, and using the latest stable kernel, i have compiled one using what i believe is necessary for my hardware, and everything works as expected except that acpi reports my cpu temp as 80 celsius at idle, causing my fan to be running constantly
so without simply using the generic config included with slack in the newer kernel, what do you think might be causing the thermal issues? i used diff on the two configs and the output is over 5,000 lines, so thats not a huge help, and im really not even sure what to be looking for the cpu is an intel i7 720qm, so if anyone might know any specific settings for that processor type needed for acpi to interface with it properly that would be much obliged here is my config for potential review: [URL] also, if i disable acpi entirely, the fan operates as normal but i cannot get readings obviously
View 1 Replies
View Related
Sep 30, 2010
so, I compiled the 2.6.35.7 kernel yesterday and used the config from 2.6.35.6 doing make oldconfig,etc
its the vanilla kernel with BFS, BFQ[*], Tuxonice, aufs2, & squashfs-lzma patches after compiling and rebooting I have noticed that the mouse freezes whenever the pc cpu is running high cpu % this didnt happen before with any other kernel and as I said, I used the 2.6.35.6 config Has anyone else had issues with 2.6.35.7 kernel? hardware is amd athlon64 3300+ 2.4ghz 1GB RAM, on 32bit Slackware -current I am going to compile the vanilla kernel now and see what happens.
View 3 Replies
View Related
Dec 17, 2010
I recently upgraded to -current from 13.0 on my Dell Inspiron 1525 Laptop. It seems to have strange problems since then. The X crashes after sometime if I am running a video in firefox (flash based, say .....) in the full-screen mode. When I am not in the full-screen, it seems to run just fine. A similar thread was posted a few days back (http://www.linuxquestions.org/questi...rashes-846796/) and I thought I had overcome the problem using one of the suggestions provided, but apparently, I just had not run full-screen videos ever since (and I thought it was solved!). code...
I should mention that, the crash happened when I was running a video chat on gmail in full-screen mode too. I have the Xorg.0.log for that too, if it is going to be helpful. Also, one thing I noticed was that even Ctrl+Alt+b_space does not work when this crash happens!! (so, I have to go ahead and reboot the system using the power button everytime) This I find very strange, since if at all, I should have been able to kill the process and restart X.
This seems to be an extraordinarily long thread, but I have put in whatever I thought could be useful info I should give. I will appreciate any help in resolving this issue.
View 3 Replies
View Related
Feb 12, 2011
After the last -current update, I couldn't launch ardour (with the SLV2 support). I obtained the following error:
Code:
/usr/lib/ardour2/ardour-2.8.11: error while loading shared libraries: librasqal.so.2: cannot open shared object file: No such file or directory I immediately tried the quick way of creating a symbolic link into the /usr/lib folder.
[Code]....
View 4 Replies
View Related
May 16, 2010
I just rebuild the kernel for slackware 13, everything works, but root file system which is ext3 is mounted as ext2. Normally I've build ext3, ext4 and so on as modules, not in the kernel... but if I do this, then the kernel mounts the file system as ext2, which is build in the kernel. I also modified rc.modules so I can make sure that ext3,ext4,jbd are loaded, but it doesnt work.
View 2 Replies
View Related
Aug 23, 2009
I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
View 2 Replies
View Related
May 19, 2011
I have squeeze and I've created my own custum kernel. Howto configure grub 2 to boot with this custom kernel automaticaly?
View 5 Replies
View Related
Apr 22, 2011
better to be ignorant now, than a lifetime ...What better way to update the aaa_elflibs "slackware-current" now?
View 9 Replies
View Related