Server :: Mysqladmin Fails On New Install?
May 11, 2010
I have two new Fedora 12 installs and both fail to complete the install and configuration of MySQL. When I run mysql_install_db I get:mysql_install_db --verbose Installing MySQL system tables... OK Filling help tables... OK
To start mysqld at boot time you have to copy support-files/mysql.server to the right place for your system
Please remember to set a password for the MySQL root User
To do so, start the server, then issue the following commands:
/usr/bin/mysqladmin -u root password 'new-password'
/usr/bin/mysqladmin -u root -h server.domain_name password 'new-password'
Alternatively you can run:
[Code]......
View 15 Replies
ADVERTISEMENT
Mar 10, 2010
I have some confusion about mysqladmin and mysql.I am using mysql version Quote:
[root@localhost freepbx-2.7.0]# mysql --version
mysql Ver 14.12 Distrib 5.0.77, for redhat-linux-gnu (i686) using readline 5.1
My MySQL is running
Quote:
[root@localhost freepbx-2.7.0]# /etc/init.d/mysqld status
mysqld (pid 11440) is running...
[Code]...
View 4 Replies
View Related
Jul 20, 2010
Attempting to install 10.04 Server on an IBM Series X 232 server. Its an old server with dual p III's, 4 small drives and an adaptec controller with a RAID 5 array. The server is currently running CentOS 5.5.
The CD I am installing from is known good. I verified it after I wrote it and verified it again during the install process. The system boots from the CD, I accept the defaults, then it fails at "adding additional components".
View 1 Replies
View Related
Apr 9, 2011
Installing support for Phototsmart 7150 on Ubuntu 10.10 server (no desktop).Installed 3.10.6 and 3.11.3a.
Installation hangs at the point where the printer is supposed to be detected (after the prompt to restart).At that point I break out with Ctrl-C.I then run hp-setup and select usb. That process complains about missing dbus file but prompts for the printing of a test page. The job begins but only a few lines are printed before the page is ejected, some more lines print, the page is ejected and so on.Have tried to uninstall with make uninstall but since there's no desktop I suppose the hp files are in the home folder?Please inform of proper uninstall for my case.I have also installed hplip via the webmin config. That install proceeds smoothly with no errors but print result is same.
View 4 Replies
View Related
Feb 7, 2011
Im having a major problem with mysql-server failing to install.The installation stoppes on "Running Transactions" (have tried waiting for 10 minutes). When I use Ctrl+C an error appears:error: %pre(mysql-server-5.0.77-4.el5_5.4.x86_64) scriptlet failed, signal 2 error: install: %pre scriptlet failed (2), skipping mysql-server-5.0.77-4.el5_5.4
View 2 Replies
View Related
Jul 7, 2011
I am trying to install openSuSE 11.4 on my IBM xSeries 440 Server and I am not having much success. I am getting to the welcome screen and installation menu screen fine, but when I select the 'install' option it loads the Linux kernel up to %100 and then just goes to a black screen from which the only escape is a reboot, the same thing happens when I select 'check installation media' and 'Firmware test'. I have tried the 'no ACPI' and 'safe settings' setting and still no luck.
I have successfully installed Windows server 2003 Enterprise edition on this machine so I know the hardware is ok.I suspect it could be a driver issue, but as I am very new to Linux and server installations I am grasping at straws.
View 5 Replies
View Related
Sep 24, 2010
i downloaded Ubuntu server from here, choosing 32-bit:[URL].. i burned the image to a CD. i booted it, and tried to install it. i went through a bunch of screens before it started to install. after a while i got an error message that reads: "Please insert the disc labeled: 'Ubuntu-Server 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.2)' in the drive /cdrom/ and press enter."
i don't understand this message. when i downloaded Server there was no message to save a second file for a second CD.
View 4 Replies
View Related
Jul 27, 2011
i downloaded Ubuntu server from here, choosing 32-bit: [code]... i burned the image to a CD. i booted it, and tried to install it. i went through a bunch of screens before it started to install. after a while i got an error message that reads: "Please insert the disc labeled: 'Ubuntu-Server 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.2)' in the drive /cdrom/ and press enter." i don't understand this message. when i downloaded Server there was no message to save a second file for a second CD.
View 3 Replies
View Related
Jul 6, 2009
I have a Toshiba A205 S5804 laptop that had Vista Home Premium installed. Tried to install Centos 5 (2.6.18-8-el5) and when I went through the install process, X Server failed to start so I had to go thorough the command line install. Once the install completed, it only booted to console.
The default resolution for this laptop is 1280X800 but I dont know if that is why or not. if anyone has a clue about my issue, please let me know.. I really dont want to install windows.
View 2 Replies
View Related
Mar 29, 2010
I have a 14TB raid, file system is read-only and I am trying to run e2fsck -B -p -C -v -y /dev/sdb1, it goes through, but fails and says bad block/inode or fails to transfer, something like that.Is there a way I can get this to run successful, this is a production storage server, its critical.
View 13 Replies
View Related
Feb 5, 2010
I was going to set up an ubuntu server, but ran into some issues. When I try to install ubuntu server 9.10, it immediately goes to a black screen with a blinking cursor as soon as I press enter on the menu. I've tried pressing F6 and editing options - noapic, nolapic, irqpoll, vga=[something...] and nothing worked. I then downloaded a standard ubuntu desktop cd, and the livecd works, and I can successfully start the install!
I've heard that I should probably use the server install if I want to use this as a server (which I do; webserver for a group of people, website, ftp, ssh.) I've also heard that it's possible to just install everything needed overtop of an ubuntu desktop base. What should I do? Are there other things I should try to make the server install work? Or is it not worth the effort, and I should just go with a desktop install and then work from there? tasksel? (It's a Dell XPS, the graphics card is NVIDIA Geforce 9800 GT).
View 1 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Sep 28, 2010
Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
View 20 Replies
View Related
Jun 28, 2009
I have been using Redhat/Fedora for 11 years. I don't understand why Fedora 11, can't even do a vga graphical install, when Windows can.
I tried many parameters, including xdriver=vesa, and it cannot used graphical install.
So, I tried text install, which I have done many times in the past.
However, F11 seems crippled, in that it will NOT do the same install achievable from a graphical install.
It will NOT allow the use of fdisk, and it will NOT allow any selection of any packages.
What is the point of this option?
Even after trying all of this, for a dual boot install, and F11 claims to have installed, there is no grub or equivalent, and the computer just boots windows, just like Fedora 11 did absolutely nothing.
What are the options now? Why is text install so crippled and incomplete? Why is standard VGA mode so hard?
View 1 Replies
View Related
Jun 17, 2011
I just installed 11.4 via the net install cd. In the configuration step, the internet connection test fails. Why would this happen if I just installed opensuse using the internet? It looks to me as if opensuse can already figure out how to use my network card. I went ahead and skipped the test, but it still doesn't make any sense to me. Let's see if internet works once I'm logged in...
View 2 Replies
View Related
Jan 7, 2011
I'm an OpenSuse user wanting to try something different.Ubuntu Studios caught my attention. I had a brief play with an older version a while ago and liked whatI saw.Im having problems installing though.I've downloaded the 32bit version from the studio website link, and burnt the DVD.However the install always fails at the same stage: Select and install software.The error message is not specific, and no more information is given other than the step has failed.Any ideas what could be causing this? Ive tried to burn the DVD several times, on 2 different machines, but no luck so far.
View 8 Replies
View Related
Jan 26, 2010
This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?
View 1 Replies
View Related
Jun 13, 2011
I just downloaded OpenSUSE 11.4. After burning the iso and trying to install I get a "cannot exec bcedit.exe" error and the install fails. Has anyone else had this happen and what do I do now?
View 3 Replies
View Related
Nov 18, 2009
On a fresh install (tried two new installs now) I'm getting an error when I try to go out to the update repositories after the install. I'm getting a "failed to download /suse/setup/descr/packages.DU.gz from [URL] It seems to get about 48% and just hangs there. This happens both if I try downloading updates during the install or if I try doing an on-line update after the system is up.
View 2 Replies
View Related
Mar 4, 2010
I just bought a Fujitsu Esprimo P1500 computer with Windows 7 Home Premium. When I try to install OpenSuse 11.2, the keyboard works in the first screen, so I can select "Installation" with the arrow keys. But when the next screen comes up (select keyboard etc.), neither keyboard nor mouse work. Well, the CapsLock and NumLock LEDs light up, but that is all (and hitting the corresponding keys does not turn them off.)
View 6 Replies
View Related
Mar 23, 2011
Have burned a DVD of 11.4 64bit and am trying to install alongside Windows 7. The boot from the disk starts, I get a SUSE splash screen and initial menu. I check install source (F4) is set to CDROM. When I then select "install" the kernel loads, but then it goes wrong. Whatever I do I get "No repository found". It's almost as though, having loaded the kernel from the DVD, the installer can no longer see the disk.
View 9 Replies
View Related
May 21, 2010
Third attempt to install 11.2 live on my netbook with three different USB sticks.
Every time it fails message reads...
Error occured while installing grub.
The only exception to a normal install is that sda1 is formatted with ext2 (to avoid journaling). I have had 11.1 running on that drive for several months without problems so there is no reason to believe it's a hardware problem.
Can I abort at this point and perhaps fix it from a live boot?
View 1 Replies
View Related
Mar 18, 2011
My system configuration is: Intel Core 2 Duo @ 2Ghz, 2Gb of RAM, Nvidia Geforce 9400 GT, Tv tuner Winfast PVR2000 XP Expert (autodetected according to the installer)
I never had a problem while installing openSUSE untill openSUSE 11.4.
All goes well while installing and configuring the network card, sound and even display(under nouveau). The problem is at the tv tuner. After i adjust some settings to it and pres OK so that the installer can save the settings all goes wrong. The installer freezes and i have to reboot the pc.
After repeating the configuration procedure and skiping this step, configuring the tv tuner using Yast this time, leads to the same thing: desktop freezes and i had to reboot because nothing is reponding anymore.
View 3 Replies
View Related
Jul 25, 2010
I recently updated from OS 11.2 to OS 11.3 and right after that had problems with my X.org server.If started with normal settings X crashes in runlevel 5, so right at the end of the boot process.If started with x11debug option X works, However I cannot use wine with this option.I don't even have an idea how to look for the problem, but there must be some feature that causes X to crash, which is not included in the debug-mode.
View 9 Replies
View Related
Jun 5, 2010
after someone accidentally kicked the power cord for a server out of the wall,the server fails to boot. upon reconnecting.this is the output i get:
Code:
fsck from util-linux-ng 2.6
/dev/sda5 was not cleanly unmounted, check forced.
filesystem checks are in progress (ESC to cancel)[code].....
View 1 Replies
View Related
Apr 9, 2011
I am unable to access cups admin via 631 port. Since I'm running non-desktop server I can't use localhost:631. In cupsd.conf I added a listen line for the client machine ip (the one I use to access cups) but no go. I also added Allow directives with this ip in the <Location> blocks. Nothing works. Cups server is running
View 3 Replies
View Related
Mar 5, 2010
I have setup a backup system on a NFS Server, and everything is working fine.Then, I decided to make changes to my backup script, and accidentally, I turned off both the NFS Server and Client without unmounting first.The NFS Server is working fine, but the client is having a problem. I cannot shutdown the nfs service. Here is what I get when I type "service nfs restart":
Shutting down NFS mountd: [ OK ]
Shutting down NFS daemon: [ OK ]
Shutting down NFS quotas: [ OK ]
[code]...
View 1 Replies
View Related
Mar 29, 2011
I am having a problem getting Apache to serve out a directory. If I place an index.html in the Document.Root I can see that page. When I remove the index.html I only see the test page for Apache. the relevant section form my httpd.conf. I am not using virtual hosts just setting up one Apache instance.
As you can see from the below I have enabled Indexes so I am at a loss :-(
ServerTokens OS
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
Timeout 120
KeepAlive Off
MaxKeepAliveRequests 100
[Code]...
View 3 Replies
View Related
Jan 18, 2010
I had a dual boot Kubuntu 9.04 - FC 11 and decided to upgrade to Kubuntu 9.10. Recalling that I had issues with my ATI card drivers when I installed Kubuntu8.10 on my laptop, I decided to install the latest ATI Catalyst drivers. After the installation was complete I received a message warning me that if the X server fails to load I should run "aticonfig --initial -f". Indeed the X Server didn't load (after I logged in the screen flushed and went black). So I reinstalled Kubuntu 8.10 from a CD I without formating the respective partition. But the problem perists, X server fails to load. Even worse my menu.lst file has been changed and I can't boot FC11.
View 8 Replies
View Related
Feb 24, 2010
I tryed to update ubuntu server from 9.04 to 9.10 a few days ago, but do-release-upgrade failed with the following output.
serv@server:~$ sudo do-release-upgrade
Checking for a new ubuntu release
Done Upgrade tool signature
Done Upgrade tool
Done downloading
[Code]....
View 3 Replies
View Related
