Server :: Forwarding An Application Having Port Id 8080 To 80 Using Httpd.conf?
Nov 26, 2010
I am a network/system Administrator in an avg. based company, we are using Cent Os as servers. We are developing applications in both php & java, for java we are using apache tomcat as server (port number 8080) & for php we are using apache as server (port 80). Php applications are uploaded in the server and giving the link to our clients like localhost.com/chrome. Now we are planning to give the java based application for testing purpose to clients & can give the application link to client as localhost.com:8080/mozilla. Is it is possible to change the link localhost.com:8080/mozilla to localhost.com/mozilla with out changing the portnumber of apache tomcat server & without interrupting the php applications, that means our clients can access php application as localhost.com/chrome & java application as localhost.com/mozilla in the same server at the same time.
View 9 Replies
ADVERTISEMENT
May 18, 2010
Finding the process that is using a certain port in linux
I have an Ubuntu Server setup, where I'm trying to set up a daemon that wants to have access to port 8080. When I run the command, the error message says it's being used by another process. But which one, it doesn't say. How can I go about finding which program uses this port?
View 1 Replies
View Related
Jun 1, 2009
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
View 3 Replies
View Related
Dec 2, 2010
My Apache is not listening on port 8080. Hence i cant access my server manager [URL]
View 2 Replies
View Related
Nov 9, 2009
accidentally I do something wrong with my server and the httpd folder missing and I need it to setup my mail server and anyone can help me what can I do without reinstalling my Cent OS? Here is the error msg :
[root@mydomain etc]# service httpd stop
Stopping httpd: [FAILED]
[root@mydomain etc]# service httpd restart
[code]....
View 3 Replies
View Related
Apr 25, 2011
I have got a reverse proxy that is working just fine, it accepts requests on port 443 and port 80 and ONLY sends traffic upstream to port 80 to the apache server listening on localhost. I use the following config:
https_port 10.14.1.72:443 cert=/etc/squid/self_certs/site.crt key=/etc/squid/self_certs/site.key defaultsite=site vhost
cache_peer 127.0.0.1 parent 443 80 no-query originserver login=PASS
http_port 10.14.1.72:80 vhost
My problem is the following : The site should act differently in some occasions based on whether http or https was requested. So my idea is to setup second http vhost on apache listening to port 8080 and on that vhost I would server the https code. So is it possible to use SQUID to :
Send traffic destined for port 443 to localhost:8080
and
Send traffic destined for port 80 to localhost:80 ?
View 13 Replies
View Related
Jul 29, 2009
I am having trouble getting my FC10 with tomcat visible to the outside world. first off i am somewhat new to linux. I am running vmware workstation to host my linux web server. i have my VMWare setup to use my second NIC solely. it is bridged and the tcp/ip is disable from the host. i can ping the ip address but cant access tomcat on port 8080 from the outside. i can hit it fine from inside fedora. i have configured my router (wrt54gs with DD-WRT firmware) for port forwarding. so basically i think that the problem is somewhere in between the host and the vmware configuring allowing the port to be forwarded through.
View 2 Replies
View Related
May 5, 2009
My first time installing centos server and adding it to xp home network. I am new to setting up my own network in general. I have a home windows wired ethernet xp network (simple linxs router) with 2 xp boxes and one centos5 box all connected to the same router. I just set up the centos box running tomcat on port 8080. I need to do two very basic things at this point, but am not sure what I need to do:
What do I need to do so I can:
1. Connect in firefox on one of my xp boxes and call the tomcat server running on my centos box?
2. Be able to ftp to centos box from either of my xp boxes?
View 2 Replies
View Related
Aug 1, 2009
I have 2 server behind the netgear router on my network . win2k3 and CentOS development server, I have port forarded 80 to win2k3 server which i can access over the internet and is accessable. However I can SSH CentOS machine and portforwarded 8080 and 82 for web access, I can't access via any of the port, browsers says UNABLE TO CONNECT.. there is no firewall in CentOS machine.
View 1 Replies
View Related
Dec 12, 2009
I have just set up shorewall on my router running Arch Linux. The external network is on eth0 and the internal network on eth1.I have set it up for masquerading and that works fine and I can open ports to the firewall. But I'm having trouble with port forwarding to my internal machines.The problem I have is that when port 22350 is forwarded to 192.168.1.3 on my local network, checking the port with nmap from a remote computer gives me:
Code:
PORT STATE SERVICE
22350/tcp closed unknown
[code]....
View 2 Replies
View Related
Dec 24, 2010
I'm new to Apache configuration so could be misunderstanding but shouldn't the characters highlighted in red below be removed?
Code:
View 9 Replies
View Related
Feb 19, 2010
This is not intended to teach you about http.conf and its various options. This guide is intended to help with speeding up your web servers by assisting in protecting them from petty abuse, such as hotlinking and scraping, and by using options that yield better performance in general. The methods used in this guide address general concepts, but the implementations of the methods are completely arbitrary, and are tailored to my needs. Each user may want to make their own modifications to suit their own setup. Again, this is a general guide, meant for instruction purposes only. I will go over each significant section in the file, and explain what it does, and the reasoning for it.
This assumes that you WISH to disable the ability to use .htaccess, and to administrate your websites on the server level. If you have a shared hosting plan then you cannot administrate your server at all, and so some of these sections will not apply to you, but some of them will; the ones that still do, you will place in your .htaccess file, in place of your httpd.conf.
Some of the options in these files are default, and so they may not be explained at all. This thread is more about the non-standard configurations.
Most of these options are standard. Notice that there are extra AddTypes, for things such as .xpi files (firefox plugins, etc), and .ogg video files.
Also take note that we disable the option for .htaccess. This makes a dramatic speed increase. This is because if .htaccess is enabled, then for each request made to your server, apache must look in the directory where the requested file resides for an .htaccess file (it does not matter whether one is there or not, and the lookup is NOT cached, so it much be performed EACH request). If apache finds a file, it must parse it. Then it must look in the parent directory, and in the parent's parent, and so on, until it reaches root (/). This is done for EACH and EVERY request. Disabling .htaccess and administrating your server at the global level will make a dramatic difference on busy servers. On not so busy servers, you may not notice the difference.
Note that we disabled cgi-bin completely. This is because we're running mod_php, so we don't need cgi-bin. If you're not using it, lock it down so that no one else can .
Also note that we used AddOutputFilterByType to make sure that all text files were compressed before being sent across the wire. This saves bandwidth.
Of this section, most of these options cannot be set in .htaccess. Options such as the addtype and addhandler and addencoding CAN be set in .htaccess; the rest are global/sever level only.
Code:
View 4 Replies
View Related
Feb 19, 2010
Installed Apache2 on a Debian Lenny system. copied my old /var/www/htnl over to the new system.
Now when I open my browser to my PC I get the index.html under /var/www not /var/www/html.
I have this in my httpd.conf:
Code:
From what I have read, the DocumentRoot should have pointed to /var/www/html overriding /var/www?
If I use "10.1.1.13/html" it works the way it should.
View 3 Replies
View Related
May 30, 2011
i am not able to port 8080 on my CentOS VPS server.I have followed all the instuctions as mentioned on iptables wiki page.Also I am able to telnet my ip address and port number, But can not access from browser.
View 6 Replies
View Related
Aug 4, 2010
what is the role of /etc/sysconfig/httpd configuration file in apache server .
View 2 Replies
View Related
Jan 13, 2011
I am administoring a few websites and the latest website to be deployed has a few "unable to check htaccess file, ensure it is readable, referer: " errors in the apache-error log.
That is fine, becuase the directory doesnt contain a .htaccess file.
Is there a setting whereby I can turn off this error ?
I dont want to turn off checking for .htaccess files because some directorys have this file and use it.
View 2 Replies
View Related
Jul 25, 2010
phpmyadmin files are in usr/share/phpmyadmin but i cant find anything in my apache2.conf or httpd.conf files that point to that directory.How do I find the route taken from the Server root "ServerRoot "/etc/apache2"" to the phpmy admin files.
View 5 Replies
View Related
Oct 21, 2010
my ftp (with SSL) server is behind firewall.
Code:81.81.81.81 FIREWALL (my external address) 192.168.1.5 - FTP server How to create portforwarding for such a configuration. I`m not interesting about iptables rules. I would like to know which port should I redirect and how ? FTP server usualy using 20 and 21. What about VSFTPD with SSL ? Also 20 and 21 ?
View 1 Replies
View Related
Jun 30, 2010
I've been trying to make install apache 2.1.8 and php 5.2.3 and work on them. After updating and installing some dependence files, apache and php could both be installed.
Then I tried to configure them. I added the following content to the end of Apache httpd.conf:
Code:
Then I run /path/to/apachectl start, and saw the message:
Quote:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Then I remembered that I didn't include the rewrite module while making install apache. So I removed the 2 lines I just added to httpd.conf.
But, after running /path/to/apachectl stop and start again, I could still see:
Code:
When I use firefox to open http://host_ip:8080/, I could see "It works!". But when I open http://host_ip:8080/hello.php (the file is already under htdocs), firefox said
Quote:
Failed to Connect
Why and how to solve it?
I noticed that for some stupid reason, the conf file wasn't updated at all and the 2 erroneous lines were still there.
View 91 Replies
View Related
Mar 3, 2010
I've got a dedicated server using whm/cpanel and there is a particular domain being hosted which contains a very elaborate .htaccess file which is full of mod_rewrite rules, among other things. I've been asked to try and get the contents of this .htaccess file into the httpd.conf (or some appropriate include file) to improve performance.
I've been reading this page and it's really confusing me: [url]
In the file usr/local/apache/conf/httpd.conf I see that there are two VirtualHost sections that appear to be relevant for my domain (which I'll call mydomain.com). The first listens on port 80 and the second is on 443. Seems to me that my apache directives in .htaccess would belong in this section. In the first section I see this:
Code:
In the second section I see this:
Code:
The problem with both of these is that the directory /usr/local/apache/conf/userdata does not exist, much less the full path to either of those files.
View 1 Replies
View Related
Feb 3, 2010
I have two PC's, one with slackware and one with arch, and I am trying to access the web server from the archlinux machine but i haven't manage to do that. The archlinux machine is connect to the internet via the slackware machine via a crossover cable:
internet > eth0 (pc1) and ppp0 (the PPPoE connection, pc1) > eth1 (pc1) > eth0 (pc2)
PC1:
ifconfig eth1 192.168.0.1 netmask 255.255.255.0
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
iptables -A FORWARD -i ppp0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i eth1 -o ppp0 -j ACCEPT
pc2:
ifconfig eth0 192.168.0.2 netmask 255.255.255.0
ifconfig eth0 up
route add default gw 192.168.0.1 eth0
/etc/resolv.conf (The same DNS as the first PC)
And now the internet is working and on the archlinux machine, but I am not able to access the web server from LAN with a public IP. I tried many iptables port forwarding commands but none worked.
View 14 Replies
View Related
Mar 18, 2010
I currently have a gui running on port 8000 on some of my remote servers, unfortunately i do not control the firewall so can not open that outbound port to access it from hereIs there a way with an ssh tunnel to redirect that to another port so i can access it from here?
View 2 Replies
View Related
Jan 16, 2010
I neded to make some changes to the httpd.conf file. Afterwards I tried restarting,but it won't restart.It's saying port 80 is already in use. after checking via lsof -i :80 I get this result:
[Code]...
View 1 Replies
View Related
Jul 8, 2010
I turned my home PC running Ubuntu 10.04 into a server, and so i am so lost, after reading like a 10-20 different guides and/or official docs, I am totally lost.
All I wanted was to create a custom 404 error page...i read about how people edited .htaccess files to customize error pages, i tried and failed also, editing apache2.conf, I got lost and i dont wanna mess up everything and also, how you're supposed to not touch either of those as its not how it should be done and instead you need to edit httpd.conf and i did and FAILED! again...
Also how do I make it so that I can make subdomain(s) on my site? and wth is a name server and where do I get one?
View 4 Replies
View Related
Feb 20, 2010
This should be easy but for some reason its not working. I don't have admin rights on one of my local networks to open the firewall for port 80 to make my server accessible remotely (from the internet). I have a remote server (OpenVZ VPS) and I want to port forward so that [url]:8080 will point to my localhost:80 from the internet itself (i can get it to work on the remote VPS server's local network)...
How could I accomplish this? Basically, I am trying to serve webpages from behind a firewall using a VPS as a hub.
View 4 Replies
View Related
Dec 13, 2010
We have a Ubuntu system that is connected to 4 different networks.
Code:
eth0: 192.168.12.9
eth1: 192.168.2.142
[code]....
View 4 Replies
View Related
Mar 26, 2010
I have the following setup and Im trying to forward all incoming connection on port 1194 on eth2 which is the external network to ip 192.168.10.100, but seems its not working.
Current config:
# Generated by iptables-save v1.3.8 on Sun Nov 16 00:00:54 2008
*nat
:PREROUTING ACCEPT [26751696:2175544875]
:POSTROUTING ACCEPT [339911:19096812]
[code]....
plus im adding the prerouting:
iptables -t nat -A PREROUTING -i eth2 -p tcp --dport 1194 -j DNAT --to-destination 192.168.10.100
This configuration doesnt work. I also I have tried:
iptables -D PREROUTING -t nat -p tcp -d XX.XX.XX.XX --dport 1194 -m state --state NEW,ESTABLISHED,RELATED -j DNAT --to 192.168.10.100:1194
and the same its not working. Connecting thru telnet to the domain: telnet mydomain.org 1194 doesnt work, but within the server, running telnet 192.168.10.100 1194 it works.
View 8 Replies
View Related
Jul 29, 2011
i need to setup port forwarding on my server (i have it running ubuntu 11.04 desktop) so i can host a minecraft server.
View 1 Replies
View Related
Jan 27, 2011
I need to change the some configuration in httpd.conf file with out affect any current status of http service.
View 3 Replies
View Related
May 16, 2011
I have a iptable as firewall, I want to open incoming of port 8080 so I use "# Allow forwarding of incoming Port 8080 traffic" but it didn't work? how can I open just incoming of port 8080?
View 3 Replies
View Related
