Server :: Setup Port Forwarding On: 25565
Jul 29, 2011i need to setup port forwarding on my server (i have it running ubuntu 11.04 desktop) so i can host a minecraft server.
View 1 Replies
ADVERTISEMENT
Networking :: Setup Port Forwarding Of Port 1000 To Ip 192.168.1.200?
Oct 24, 2010I had to add them to my firewall script when I installed openvpn on my dd-wrt router:
iptables -I FORWARD -i br0 -o tun0 -j ACCEPT
iptables -I FORWARD -i tun0 -o br0 -j ACCEPT
iptables -I INPUT -i tun0 -j REJECT
iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE
what should I add/change to set up port forwarding of port 1000 to ip 192.168.1.200. also how to get the answer sent by 192.168.1.200 follow the same route used by the data received through port forwarding.
General :: Setup Self Port Forwarding On Fedora 13 X64?
Oct 2, 2010How do I setup Self Port Forwarding on Fedora 13 x64 How Port Forwarding Works Port forwarding allows access to a local area network by a remote user through forwarding ports that provide ftp access and web server access. The operating systems use a kernel or ipfirewall to carry out the port forwarding process.
There are several different ways that port forwarding is accomplished. * Self Forwarding: Self forwarding is port forwarding that is accomplished on a local area network that has multiple computers connected to the network. Since all of the computers share the same IP address, the port forwarding must be conducted within each computer on its own system. If the local area network router has a network access translator then the computers that are connected to the router must also do port forwarding within their own system.Port forwarding can be accomplished with Unix systems however the port can only be accessed by the root administrator. This is a less common method of port forwarding due to the fact that using a root administrator poses risks to the system because the users will often take a detour to a higher port number to gain faster access to the server.Double port forwarding involves the use of multiple routers that join computers on a local area network. As a result, the ports on one router are forwarded to another router that acts as a gateway. The gateway router then forwards to a host on the local area network (LAN). This type of port forwarding involves the communication of several components which include the session server, session client, and session port. When the user establishes a connection the session server will connect to one of the session ports that are to be forwarded which will in turn, forward the port to the session client. Reverse port forwarding is used when access is required to a port that is protected behind a firewall.
While port forwarding is convenient, there are a few things to be aware of when using this type of technology. If you use port forwarding only one port can be used at a time and the machine that is receiving the port forwarding can only view the information as coming from the router instead of the original machine. Additionally, port forwarding can open up network access to other machines that may be able to find the port forwarding by gaining unauthorized access. I know how to setup port forwarding in my router along with Dyndns.org free ED, but my local area network has multiple computers connected to the network on my router. All of the computers share the same external (public) dynamic IP address; when I setup port forwarding only my Web Server can access the internet, so how do I setup Self Port Forwarding on Fedora 13 x64
[Code]...
General :: Setup A Ssh Account With No Terminal But Port Forwarding?
Jan 29, 2011I am trying to set up a new user account I can give to friends so they can SSH into my forward computer, and only allow forwarding of certain ports.
I do not want my friends to have a shell, or be able to change what ports to where they are allowed to forward.
example session: joe(friend) connects using PuTTY (that I have pre-set, he isn't good with computers) to example.com(my Internet facing computer) forwarding ports 8080,1990,25565 to him(with what ever end ports he wants, preferably they stay the same numbers) example ssh command to do similar (but he can still change the ports on my computer!)
ssh -N restricteduser@example.com -p443 -L8080:192.168.1.2:8080 -L1990:127.0.0.1:1990 -L25565:127.0.0.1:25565
is it possible to also leave default SSH functinality for all other users but this one?
I found this when I was searching google, but alas, I did not quite understand what was being suggested, and I don't think they covered restricting port forwarding
Ubuntu Servers :: Port Forwarding Setup Using IPTables - Transparent Proxy
May 13, 2010I'm new to linux, but enjoy using it very much, especially without a GUI, console is fun! I need to set up port forwarding. We have 3 servers, 1x running Ubuntu server 8.04 (used as transparent proxy), 1x server 2003, 1x windows xp.
The linux box has the following ips:
eth0 (internal) 192.168.1.5
eth1 (external) 192.168.0.7
Windows server 2003:
192.168.1.6
Windows XP:
192.168.1.9
Router:
192.168.0.1
The router automatically forwards specific ports to 196.168.0.7 (Linux eth0). From there I want to forward port 8585 to 192.168.1.6 and 3000 to 192.168.1.9. Is there a way that I can do this using iptables?
The commands that I think I'm gonna use look like this:
iptables -A FORWARD -s 192.168.0.0/24 -p tcp --dport 8585 -d 192.168.1.6 -j ACCEPT
iptables -A FORWARD -s 192.168.0.0/24 -p tcp --dport 3000 -d 192.168.1.9 -j ACCEPT
Would this be a correct way of doing it? My biggest problem is that I can't test it without going live, and if I go live and something doesn't work, the entire building will be left without internet, people will hate me. Also, The proxy captures all data on port 80 and forwards it to 3128 so that the proxy can monitor the usage, and a few systems runs fine with it, others however can ping websites, and internet explorer says "website found, waiting for reply" but the webpages cannot be displayed.
Networking :: Shorewall: Port Forwarding Port Is Closed Even After Forwarding?
Dec 12, 2009I have just set up shorewall on my router running Arch Linux. The external network is on eth0 and the internal network on eth1.I have set it up for masquerading and that works fine and I can open ports to the firewall. But I'm having trouble with port forwarding to my internal machines.The problem I have is that when port 22350 is forwarded to 192.168.1.3 on my local network, checking the port with nmap from a remote computer gives me:
Code:
PORT STATE SERVICE
22350/tcp closed unknown
[code]....
Server :: Port Forwarding For FTP?
Oct 21, 2010my ftp (with SSL) server is behind firewall.
Code:81.81.81.81 FIREWALL (my external address) 192.168.1.5 - FTP server How to create portforwarding for such a configuration. I`m not interesting about iptables rules. I would like to know which port should I redirect and how ? FTP server usualy using 20 and 21. What about VSFTPD with SSL ? Also 20 and 21 ?
Networking :: Port Forwarding 80 To LAN (Web Server)
Feb 3, 2010I have two PC's, one with slackware and one with arch, and I am trying to access the web server from the archlinux machine but i haven't manage to do that. The archlinux machine is connect to the internet via the slackware machine via a crossover cable:
internet > eth0 (pc1) and ppp0 (the PPPoE connection, pc1) > eth1 (pc1) > eth0 (pc2)
PC1:
ifconfig eth1 192.168.0.1 netmask 255.255.255.0
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
iptables -A FORWARD -i ppp0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i eth1 -o ppp0 -j ACCEPT
pc2:
ifconfig eth0 192.168.0.2 netmask 255.255.255.0
ifconfig eth0 up
route add default gw 192.168.0.1 eth0
/etc/resolv.conf (The same DNS as the first PC)
And now the internet is working and on the archlinux machine, but I am not able to access the web server from LAN with a public IP. I tried many iptables port forwarding commands but none worked.
Server :: SSH Tunnel Port Forwarding
Mar 18, 2010I currently have a gui running on port 8000 on some of my remote servers, unfortunately i do not control the firewall so can not open that outbound port to access it from hereIs there a way with an ssh tunnel to redirect that to another port so i can access it from here?
View 2 Replies View RelatedUbuntu Networking :: SSH Port Forwarding For Web Server
Feb 20, 2010This should be easy but for some reason its not working. I don't have admin rights on one of my local networks to open the firewall for port 80 to make my server accessible remotely (from the internet). I have a remote server (OpenVZ VPS) and I want to port forward so that [url]:8080 will point to my localhost:80 from the internet itself (i can get it to work on the remote VPS server's local network)...
How could I accomplish this? Basically, I am trying to serve webpages from behind a firewall using a VPS as a hub.
Ubuntu Servers :: Port Forwarding To Another Server On The LAN?
Dec 13, 2010We have a Ubuntu system that is connected to 4 different networks.
Code:
eth0: 192.168.12.9
eth1: 192.168.2.142
[code]....
Server :: Iptables Port Forwarding Not Working?
Mar 26, 2010I have the following setup and Im trying to forward all incoming connection on port 1194 on eth2 which is the external network to ip 192.168.10.100, but seems its not working.
Current config:
# Generated by iptables-save v1.3.8 on Sun Nov 16 00:00:54 2008
*nat
:PREROUTING ACCEPT [26751696:2175544875]
:POSTROUTING ACCEPT [339911:19096812]
[code]....
plus im adding the prerouting:
iptables -t nat -A PREROUTING -i eth2 -p tcp --dport 1194 -j DNAT --to-destination 192.168.10.100
This configuration doesnt work. I also I have tried:
iptables -D PREROUTING -t nat -p tcp -d XX.XX.XX.XX --dport 1194 -m state --state NEW,ESTABLISHED,RELATED -j DNAT --to 192.168.10.100:1194
and the same its not working. Connecting thru telnet to the domain: telnet mydomain.org 1194 doesnt work, but within the server, running telnet 192.168.10.100 1194 it works.
Ubuntu Networking :: Forwarding A Port Behind A Local DNS Server?
Jul 9, 2010Here's my (admittedly complex) situation:
I set up a dynamic DNS address for my home network. Let's call it [URL]. Then I set up one of my machines with a bind9 DNS server and pointed my router's DNS setting to it. I did this so that I could resolve awesome.server.com from machines inside my network and have them correctly find my server. Then I set up a second machine to serve web pages using [URL]. I did this by forwarding port 9200 on my router to port 80 on that machine. This works, but of course, it only works from outside my network.
What is the best way to get [URL] to work from inside my network?
I've tried setting up the iptables on my server to forward that port, but it just times out. I used these rules that I found by searching the internet:
Code:
iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 9200 -j DNAT --to 192.168.0.300:80
iptables -A INPUT -p tcp -m state --state NEW --dport 9200 -i eth1 -j ACCEPT
However, those rules might be failing because they are intended to forward ports requested from outside the network. I must admit, this iptables stuff is way, way over my head. Is there a different method that I must use to make it work inside my network? Or is there a better way besides iptables?
Ubuntu Networking :: SSH Server And Router Port Forwarding
Aug 29, 2010I'm trying to get my SSH server I set up on my home box working from behind a router. A 2wire 2700HG-B gateway, in fact. Now, I know my server is working fine, because I can get into it via loopback, anywhere inside the LAN from another machine, OR if I go into the router's config and enable DMZ for the machine. However, I don't like having DMZ on all the time because of the kludge-ness of it, and the security issue of the complete absence of a hardware firewall.If I try to port forward and access it from outside the LAN using the external IP (or my DynDNS, because it's dynamic), it just times out. I have a nonstandard port (45) for the listen port of the server, to keep away hack attempts if I were using the standard 22. I used this to see if the port was open, and it said it was. But, I tried the trick of telnetting the IP with that port, and it also timed out, instead of printing stuff about OpenSSH.
Attached is a screenie of my router's firewall page, so you all can look at it and see if I'm an idiot and doing it wrong. You might notice uTorrent there, it's because this machine is a dual-boot with 7, and the router doesn't differentiate the OS's. Also the SSH @ 46 port is for the Windows side, with freeSSHd. I changed the port on that one so the client I have can distinguish them, so it can run a reachability test.
Server :: Connecting CCTV DVR To Router With Port Forwarding?
Jul 30, 20111. Need to connect 2 CCTV DVRs and view from remote. 2. Can get a static IP address. But I dont know if this is a secure way since any once can view if the know the ip address. 3. Question is : is it possible to connect the DVR( s) to a linux server which will get user name and password before letting us view the DVR. Currently there is one set as follows: 1. From location X a device is connected to location Y using leased line and static IP (12 kms distance). In location Y a router is placed and port forwarding is configured. From Location Z using internet and remote desktop concept the device at location X is viewed and data captured. Is it possible to use a similar concept but with some sort of security authentication procedure in place.
View 1 Replies View RelatedFedora Security :: Port Forwarding: Works To Other Device, But Not Server?
Dec 7, 2009If I forward port 5764 to port 80 to my VOIP device, I can nmap and get a proper connection. If I forward port 5764 to port 22 to my server, it comes up filtered. It even happens if I try forwarding port 80 to my server. So I'm sure it has something to do with my server, but I'm not sure.Here's my Linksys iptables:
Code:
:wanin - [0:0]
-A FORWARD -i vlan1 -j wanin
[code]....
Ubuntu Networking :: Enable Port Forwarding So Can Use Computer As A FTP Server?
Oct 3, 2010I'm trying to enable port forwarding so I can use my computer as an FTP server to some friends. Here's my setup:
CLEAR wireless modem <--> LAN port 4 on router (not WAN) and LAN port 1 on router <---> eth0 in Ubuntu 9.10
The modem acts as a DHCP server which successfully assigns an IP address to my desktop system. I can also go onto the internet just fine on my desktop, and any other computer that connects to the router.
I have enabled port forwarding on the modem (not the router because it's being used as a switch, and not using its WAN port) to forward ports 21 and 80 to my desktop. What I don't understand, though, is that when I try to FTP to the modem's WAN IP address, the connection is refused. However, when I use websites such as:
www.canyouseeme.org
www.yougetsignal.com/tools/open-ports/
They say ports 21 and 80 are open (and not other random ports like 22 or 23 which I tried to see if the site simply said everything was open) but I cannot access my site from a web browser.
I was wondering what it was that's stopping computers from the Internet from communicating with my computer? The modem? The router? Configs?
Server :: Forwarding An Application Having Port Id 8080 To 80 Using Httpd.conf?
Nov 26, 2010I am a network/system Administrator in an avg. based company, we are using Cent Os as servers. We are developing applications in both php & java, for java we are using apache tomcat as server (port number 8080) & for php we are using apache as server (port 80). Php applications are uploaded in the server and giving the link to our clients like localhost.com/chrome. Now we are planning to give the java based application for testing purpose to clients & can give the application link to client as localhost.com:8080/mozilla. Is it is possible to change the link localhost.com:8080/mozilla to localhost.com/mozilla with out changing the portnumber of apache tomcat server & without interrupting the php applications, that means our clients can access php application as localhost.com/chrome & java application as localhost.com/mozilla in the same server at the same time.
View 9 Replies View RelatedFedora Networking :: Port Forwarding For Apache Server At Home Network
Feb 7, 2010I am setting up Apache (Fedora 12) inside my home network. From inside my home network I access it without any problem. I need to set it up to access it from internet. I have the following questions. Here is temporary setup for testing purpose.
Internet-->ADSL modem (SEIMENS Speed Stream 4200)---> Apache (Fedora 12)
1. Do I have to do any kind of ports forwarding on ADSL modem. (There is no option to do port forwarding on Modem) May be I need different Model of Modem??
2. I tired to Ping my real IP for modem form another computer from internet. I am even unable to PING the ADSL 's real IP. Why it is that?
OpenSUSE Network :: Port Forwarding & Samba Access For An Apache Lamp Server?
May 23, 2010How do you configure the firewall to allow external web access (it's a LAMP server) and internal access for samba shares ?
View 6 Replies View RelatedGeneral :: Warning: Remote Port Forwarding Failed For Listen Port 7869
Jul 20, 2010I tried to make "ssh tunneling", but failed and got this message.
Quote:
Administrator@windstory-PC /
$ ssh -R 7869:localhost:7869 windowsstudy@192.168.0.4
windowsstudy@192.168.0.4's password:
Warning: remote port forwarding failed for listen port 7869 Last login: Wed Jul 21 01:56:04 2010 from 192.168.0.2 -bash-3.2$
1. system environment
192.168.0.2 - windows 7 + copssh
192.168.0.4 - centos 5.4 x86 + openssh
2. Guide for setting "ssh tunneling"
[URL]
3. Added this to sshd.conf
Quote:
AllowTcpForwarding yes
4. "netstat -na|grep 7869" at 192.168.0.4
Quote:
[root:maestro:~]# netstat -na|grep 7869
tcp 0 0 0.0.0.0:7869 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:7869 127.0.0.1:53539 ESTABLISHED
[code]....
5. result of "ssh -vvv -R 7869:localhost:7869 windowsstudy@192.168.0.4"
Quote:
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
[code]....
6. I added 7869 for telnet service as follow;
Quote:
mytelnet 7869/tcp # My Telnet server
Ubuntu Security :: SSH Port Forwarding, Disable Or Edit A Forwarded Port?
Nov 1, 2010sudo ssh -L 750:192.168.123.103:873 username@192.168.123.103It does exactly what it's supposed to do, but how do i edit / remove this rule?Is there some config file where i can alter the forwarding? How does it get stored?Im using Ubuntu 10.10Server Edition (allthough i recon it would be pretty much the same across all versions
View 5 Replies View RelatedUbuntu :: Port Forwarding Crutch - Number Of Apps That Are Unable To Have The Outgoing Port Changed ?
Mar 28, 2010I'm not that great with mailservers, and just been thrown a curveball with a MS Exchange environment for which there is apparently no solution... yeah, right. But is there a workaround?
The problem is that the site mail (SMTP) needs to be sent via port 26 instead of the commonly used 25. Port 25 is mapped to a mailfilter, which apparently causes havoc with some of the mail, and the techs that have been on site trying to coax the Exchange server to co-operate have said that the only way would be to get rid of the filter.
The problem is that there are number of apps that are unable to have the outgoing port changed and so keep sending mail out on port 25.
I look after the Unix/Linux side of things at work, and I was wondering if there was an easy way to set up a Ubuntu box to receive mail on port 25 and just forward it to the MS box on port 26? So, in other words (and I hope this makes sense): monitor port 25, and forward whatever comes in on port 25 to the server on port 26. Simple portforwarding, or is it? What steps do I need to take?
Ubuntu Networking :: Error - Remote Port Forwarding Failed For Listen Port 5500
Aug 7, 2010When I use the following command:
ssh user@ssh_server -L 5500:localhost:5500 -p 22
everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:
ssh user@ssh_server -R 5500:localhost:5500 -p 22
I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...
Security :: Port-bind Shellcodes Work With Port-forwarding?
Apr 27, 2011I'll explain this in one sentence: Is it possible to program a port-binding shellcode in which people across the Internet can connect to, without being thwarted by the router blocking their data because the port its bound to doesn't allow port-forwarding
View 2 Replies View RelatedUbuntu Networking :: Port Forwarding Through A Specific Port?
Jul 14, 2011I want to set my ip as static and port forward it through a specific port can anyone help me with this im using ubuntu 10 with 64 bit OS
View 1 Replies View RelatedNetworking :: Iptables - Port Forwarding To Blocked Port?
Mar 25, 2010I have a mail server on which I would like to block port 25 on my eth0 for everyone except our external spam filter. the problem is that I want our users to be able to connect via port 10025 which is forwarded to port 25, which then is blocked...
View 2 Replies View RelatedServer :: Setup Reverse Proxy With Proxy_mod To Port 443 On IIS Server
Aug 30, 2010We currently have a SUSE Apache2 reverse proxy server setup to reverse proxy (proxy_mod) our GroupWise Web Access server. Our SUSE box is located at www.domain.com. Our GroupWise Web Access server is located internally and is called GWMail. We are in the process of migrating from Novell to Windows, so we will have an exchange server with OWA access running on a Windows Server 2008 IIS7 box. That one will be called EXMail internally. Right now when someone goes to www.domain.com/gw/webacc it goes to the GWMail internal server from the outside world. This was all set up by previous techs who used Linux more.
We would like to set up reverse proxy to be able to reverse proxy to the Exchange Server from the outside world. Unfortunately the snag we are running into is that Exchange needs to run on port 443, and forwarding to port 443 has been a little tricky. I've read elsewhere we need to implement a generic TCP proxy, such as IPtables. what we need to do to get our SUSU Apache2 server to be able to reverse proxy to our Exchange server on port 443. For the save of argument lets call our SUSE server ExtranetServer. Below is our default-configuration.conf file's configuration:
[Code]....
CentOS 5 :: Can't Do Port Forwarding ?
Mar 5, 2011I did local apache server at internal ip 192.168.1.2 and i wanna to do port forwarding to enter to it by my external ip address ?
View 4 Replies View RelatedUbuntu :: DREADED Port Forwarding ?
Jan 24, 2010I am having issues with the DREADED port forwarding. *why* is this important? *why* does it become such a chore to change? trying to run xlink kai on karmic. i have access to the routers in the house. the primary (#1) router is a standard issue Linksys, the other router is my DDWRT router which connects wirelessly to #1.
View 3 Replies View Related