I installled it 2 weeks ago. How do I access the windows sharing from the fedora box. My windows network is on AD that runs on Win 2003 Server.? I can ping to the server, but how to access the sharing? I had look at the forum and some are very technical.
View 4 Repliesi need to access the shared files of computes with windows on it.i have fedora 8 on my machine..our computers are on the same network of the office...how do i access my friend's shared file.??
View 2 Replies View RelatedHow can I access shared Windows files from a fedora system
View 3 Replies View RelatedLinux OS : Fedora 10 (No graphical mode)Windows OS : XP and Windows Server NT...I am able to access from my windows to linux using following step//fedora10 ip username of admin and password...I am able to view the admin and shared printer of fedora 10.When i try to enter in the admin folder i am not able to access it. It is giving error "Access is denied".
View 6 Replies View RelatedI have been having off and on issues with my samba file shares. I am sharing a NTFS formated hard drive where the mount point is in my home directory, as well as a printer connected via USB. I am to the point where printing works (using it as an ipp print share, samba is configured for it, but I don't know if it works or not), and I can access the shared folder from Windows, but I can't access the shared folder from any Ubuntu machine. I get the error:
[Code]....
I'm Using CentOS5.4 and I don't know how to access a windows shared folder over the network
View 1 Replies View RelatedI am using RHEL5 in that i have installed samba rpm as well as created samba users while access the shared folders in WINDOWS i got "access dined" error.
View 1 Replies View RelatedWhen I first start up my 2 computers once the network is established if I try to acces the Ubuntu shared folders from the Win XP machine I get this error:"\localhost not accessible. You might not have permission to usethis network resource.t the administrator of this server to findout if you have access permissions.You were not connected because aduplicate name exits on the network. Go to System in Control Panel tochange the computer name and try again."If I first access the Windows shared files and then go back to the Win machine I get the password prompt and all is well
View 9 Replies View Relatedhow i am so new with xubuntu i want to know how to set it up. im so new in xubuntu.
View 4 Replies View RelatedI am new to linux and know some basics, no proper knowledge of servers. I want to know is that how can i access my companies "fileserver" from linux (gui as well as from cmd line). This file server i can access easily from windows machine but i don't know how to open/access file server from linux machine..If can tell what tools are needed and also but is the process from command line.File server is windows server and my machines is Redhat linux.
View 3 Replies View RelatedI have a desktop pc running Windows 7 and a netbook running xubuntu 9.10. What I am trying to do is to access the shared folders on my windows 7 pc on my xubuntu netbook.
View 9 Replies View RelatedI have been learning about P2P networks and have been experimenting with all kinds of operating systems. I figured out how to share and access Windows shared files on other Windows computers.
Now I'm trying to access Windows shared folders from Linux operating systems.
Here's the deal. I created a shared folder on Windows 2000 Professional. I want to open it from Kubuntu 10.04.
I am not running Virtualbox. These are separate operating systems on separate computers.
Installed Fedora 10 on my Downloader (just a name for the pc as its mainly used for torrent downloading) computer. But I cant access the fedora shared folder from my windows XP. Accessing XP shared folders from F10 is fine. I have another 2 computer where I have installed Ubuntu 8.10. I have no problem accessing either of the Ubuntu system from my XP computer. The F10 computer comes up fine on my Workgroup list of xp. I double click to go into the F10, a login window pops up and askes for username and password. I used the normal username and root / password to log in. But it keeps popping up for password again and again. BTW, Recently I Installed Win7 Beta on the Windows computer and Surprisingly I can access the Fedora 10 computer shared folder just fine from Win7. But I need to get it working under windows XP.
Here is my smb.conf file
Code:
# Global Settings
[global]
# Network Related Options
# workgroup = NT-Domain-Name or Workgroup-Name, e.g.: MIDEARTH
# server string is the equivalent of the NT Description field netbios name can be used to specify a server name not tied to the hostname. Interfaces lets you configure Samba to use multiple interfaces. If you have multiple network interfaces then you can list the ones. You want to listen on (never omit localhost). Hosts Allow/Hosts Deny lets you restrict who can connect, and you can specify it as a per share option as well
workgroup = THEMATRIX
server string = Samba Server Version %v
netbios name = MYSERVER
;interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
;hosts allow = 127. 192.168.12. 192.168.13 .....
I've installed Fedora 12 on my laptop and when I share any folder and try to access it over the network using smb://<ip-address/<folder> it says "file or folder smb://..... does not exist"
Now if I simply try to access - smb://<ip-address> on the file browser it shows me shared folders but when I double click I get the same error.
I've SELinux disable, Firewall disable but I'm still not able to access these folders.
I did the exactly same samba configuration on openSUSE and I'm able to access the folder but not with Fedora 12.
I have a Belkin router with an external HDD attached to it through the USB port on the router. Every time I try to access it, I get a popup asking for the username, domain name, and password. I have no idea how to gain access to it in Fedora. I can access it fine with windows XP and 7, but get the login screen when using Fedora. I can access my shared files on the xp machine just fine with fedora, but not the external on the router. Do I need to do some extra configuring with samba to get it to work? What is my domain password anyway, I don't ever remember setting one up? Is there a way to find out and just plug it in when the login screen pops up? I am clueless, I tried searching, but everything I come up with involves vpn, which I am not using. If it helps, I sometimes get a similar login screen in windows as well, usually when I first log into either my xp machine or my 7. Its not every time I log in, but it does occasionally happen, I have no idea why. Networking is just not my forte. What I do to get around it is go into a file browser and type in the network location (\192.168.1.1FreeAgent Drive). Once I have done this I can can access the drive by clicking on the map I created in 'My Computer'.
View 2 Replies View RelatedI am trying to set up printing on my Fedora 14 laptop, on my home network.
Details:
- Home network, single subnet, the desktops are connected to the switch portion of my Linksys via Ethernet and all have static addresses. Name resolution between them is via hosts file entries. The router is running wireless (WPA2/AES/DHCP) to accommodate my laptop which is dual boot XP Pro and Linux Fedora 14.
- The printer is an HP Deskjet F4180 printer. It is attached via USB to a Windows XP Pro box and shared. The XP box is wired and static ip.
- I am able to see all the shares and print to the shared printer from any of the Windows boxes, wired and wireless, including my laptop when I run Windows on it.
- My Fedora 14 is working fine on wireless, using Network Manager and KDE desktop. I am able to access all the Windows shares on both of my wired desktops. One desktop is XP Pro, the other is Windows 7.
This is what happens when I try to set up printing on Fedora:
- I go to Administration / Printing and click to Add a Printer.
- I am prompted for the root password twice, which I put in.
- I select Network Printer / Windows printer via samba and click on Browse...
- It finds my WORKGROOUP and machine name mig29 and prompts for user ID and password which I type in.
[code]....
the user ID and logon on Fedora is different from the one on Windows. During setup I am prompted for credentials. It seems to me that somewhere down the line Fedora supplies not the credentials I supply but my local user ID and password and it obviously fails.
When i first installed ubuntu on my laptop i could access the shared folders i had put on the network with windows through ubuntu, read and write files, copy and paste them etc. I tried recently going to Places>Network and i get this error: failed to retrieve share list from server
It never used to do this, in fact when i went to places the network was not called "network", it was my own title. i can connect to the server with the ip address, but that only lets me take files from the windows network, and not the other way around. I really have two issues
1. cannot place files on the network from my ubuntu laptop
2. cannot connect to shared folder network from places like i could before
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies View Relatedspent so much time trying to get Samaba working, but with no luckHere is my smb.confQuote:
[global]
realm =
netbios name = rlx-laptop
[code]....
I have a hardisk shared on my windows machine. And I would like to be able to access this on my opensuse notebook. Just cant figure it out. Dont have much experience in opensuse. I just need to know the best way to do this. Also, can opensuse read/write NTFS? Also I have a printer on my moms machine that runs XP home. The printer is shared I would like to be able to print but its no biggie. It some type of HP 3 in 1. I just wnat it to print, I dont care about the scanner and stuff.
View 3 Replies View RelatedI have a OpenSUSE 11 machine set up as a domain controller. I have set my printer up to be shared to Windows machines logging into the domain. I was able to install the printer to my Windows machines. When you go to the printers folder in Windows, it shows the printer but says "access denied" instead of the usual "ready". If I print to the shared printer the job will go through. I am thinking it is an authentication issue because if I log into Windows machine as "root" and let it build a profile, the printer doesn't show the "access denied" message. How do I allow other users to have access to the printer?
View 1 Replies View RelatedI wish to write a python code so that I can access a file on a windows computer on the network. I know the IP, Computer Name, Workgroup, username,password and any other neccesary detail of the computer. I also have the access to the computer to intall any software I may need to install on the said windows computer.
Kindly guide me so that I may access the files. The files are in a folder shared over the network but not on the windows drive of the computer.
I am able to access the files using gui (ubuntu 11.04).
I have installed samba server one month ago and it was working fine till yesterday but today morning when any network client is trying to access samba shared files by giving smb://<serveripaddress> it is asking for password...that is ok but when he is giving the password it is again opening the same password window to enter password again.The clients are giving correct password that is confirm. At the server side i have run smbclient -L localhost -U% and that is giving proper response so that also means that samba server is working fine so i dont know what could be the problem and what its solution.
View 7 Replies View RelatedI upgrade the system from 11.1 to 11.2 seems everything work fine, no error no warning, after a reboot the consol show : mount error while loading shared libraries: libvolume_id.so.1: Cannot open shared object file: No such file or directory. when I try to repair the system the repair tool cannot find the root partion,
View 1 Replies View Relatedhow to install libxcb-xlib.so.0?When I start one software and it complains that
"error while loading shared libraries: libxcb-xlib.so.0: cannot open shared object file: No such file or directory"
I have lastest libxcb1 installed and searched in my system but didnot find a relevant result.
I installed the latest Gimp beta and it worked fine but then I couldn't open it. I removed it and I reinstalled but it didn't work, so I installed the latest stable version (no beta) and it still does not work, when I open it form Terminal, this is the response:gimp: error while loading shared libraries: libbabl-0.0.so.0: cannot open shared object file: No such file or directory
View 3 Replies View RelatedMy company runs a Windows server. I can connect remotely via a very slow desktop emulator program in VirtualBox or I can just VPN and access whatever files I need. #2 is the preferred option.
So far I have officially setup the VPN and everything. It logs in. It gives me the little lock symbol above the Network Manger icon. I'm connected!
But...
How do I actually access the darn files available via the VPN? We keep most files on a single server for the company. Internally, it looks something like "//Bob/Folder/". At the office I have the shortcut set to the "folder" portion of the above since that's where things are located.
I'm not seeing anything related to the VPN in Nautilus, under Network... squat. I've tried several methods of using the "Places > Connect to Server" function while setting it to "Windows Share" as well. Honestly, I'm unsure if this is appropriate nor what to put in the fields (Server, Share, Folder, User Name, Domain Name) if this is the right place to be.
I cannot access my Ubuntu samba server using windows XP or 7. I keep getting prompted for a username/password. I have created both a unix username with password and a samba username with the same password i used for the unix user. When windows prompts me for the username/password i give it the same one i created on the samba server, but it still will not take it. I know samba is running because i can view the shares but cannot access them without getting prompted for username/password. I just have the one user for now while i am testing, but there will be more.
I am using Ubuntu Desktop 10.04.
I have a fresh install of CentOS 5.5. I am trying to browse to the Windows machines on my network (Places > Network Servers > Windows Network), but I get a blank window. I am able to ping the Windows machines using their IP address, but not by their name. What do I need to do to be able to see the Windows machines and also to connect to shared folders on these machines? So far I have tried starting SMB (via System > Administration > Server Settings > Services). I have also tried changing my smb workgroup to "WORKGROUP" (the default was mygroup which did not match my Windows machines.
View 8 Replies View RelatedHeres what I have and what I am looking to do. I have a PC with a single core 2 Ghz Pentium processor and 1 gb of RAM. Its pretty limited in what it can do and run. It has two physical HDDs one a 250 GB SATA and the other a 160GB SATA. One the two hard drives I have the following partition structure:
160 GB HDD
28 GB Ubuntu OS Partition
2 GB Swap Partition
130 GB Free Partition (EXT4 but empty)
250 GB HDD
250 GB Free Partition (EXT4 but empty)
What I would like to do is the following:
1. Strip down Ubuntu 10.04 to where only the bare minimums run and system resources (Since they are so scarce on this system anyway) be readily available
2. Have the system run solely as a Samba File server for all other computers in the house to read and write to
3. Allow other "known" systems to access the shared folder without authentication, but any system with an unknown name, should have to authenticate first
4. Have the 130 GB from HDA and 250 GB from HDB, be presented as one network drive of 380 GB as opposed to two of 130 and 250 gb respectively
Are these things that are possible for a person of mid level understanding of Linux? How would one set about achieving all of the above goals?