I am trying to create a custom ruleset in sendmail, but not getting through, please guide me in right direction. I made following entry in sendmail.mc
LOCAL_CONFIG
Kspamsubject hash /etc/mail/spamsubject
HSubject: $>ScreenSubject
[code]....
I am looking for the syntax for a sendmail ruleset to log the message subject to the syslog service. I have found a few posts on the web, but none seem to work. The basic appear to be - add the following to the sendmail.mc file then compile the sendmail.cf file using M4. The syntax suggested follows (I believe the rewrite rule is incorrect)(I and using <T> to indicate tabs):
LOCAL_CONFIC
Klog syslog
HSubject:<T>$>Check_Subject
LOCAL_RULESETS
SCheck_Subject
R$*<T>$:<T>$(log Subject=$1<T>$)<T>$1
sendmail.cf compiles and when used as the config file for sendmail - everything appears to work, but no subject is logged.
I had configured my php to use sendmail as its mail agent. My server which is centOS 4.6 in this case runs in a lan.
What I need is that when i fire a mail function from php page hosted on my server in LAN, mail should get delivered to gmail or whatever destination address is..
But I am facing problem...When I open my php page which fires the mail, it takes long time to load say 1-2 minute in loading. After that it says Message sent successfully, but message not get delivered.
I had checked sendmail it is running... I also checked spam folder of destination email..
I'm trying to configure procmail for sendmail but its not working. I added these 2 lines to sendmail.mc:
define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail')dnl
FEATURE(local_procmail)dnl
So my question is, where do I put .procmailrc? An examples I found on the net has the procmailrc in the users mail directory, but there are no user mail directories on the sendmail server. It is used purely to relay mail to the Exchange server.
I have this:
[Code]...
which runs a program. But I want to add some thing to it so that, if the subject contain a particular string, the program shouldn't be run. How do I do that?
I've a mailserver based on postfix. I'm queueing all the emails that have to be sent. After that I'm managing the queue with the output of mailq.
But in this way I'm just able to have this details of the queued mails: sender, receiver, size, time. There is a way to see also the subject of that emails?
I am using webmin for my daily tasks. I have fedora 13, whenever I click on ''Sendmail M4 Configuration'' or Outgoing Addresses (generics)'' I get the following error message
Quote:
The Sendmail M4 configuration base directory /usr/share/sendmail-cf was not found on your system, or is not the correct directory. Maybe it has not been installed (common for packaged installs of Sendmail), or the module config is incorrect. I read documentation at sendmail.org, it seems that structure of directories for send mail has been changed in version sendmail-8.1.4 shipped with FC13. In webmin config module we have
Quote:
Sendmail M4 base directory = /usr/share/sendmail-cf
which is not there. I did a locate / sendmail-cf on the command line, it finds nothing
I need help with header_check filter on postfix. In the last week mail users received a spam e-mail without subject line and I don't know what is the way to reject this. This is the example of message header:
From: "example@example.com"
Date: September 16, 2010 9:07:43 AM GMT-04:00
To: <example@example.com>
I want to reject e-mails that don't have Subject line
How would one setup a header_check that would discard all emails that have more than 6 words in it? Such as, if there are more than 6 spaces in the entire message it would be deleted? I cannot find this out but it would reduce my spam intake by 50+ a day.
View 2 Replies View RelatedDid anyone heard about or can suggest mabe a postfix serverside solution in order to insert a counter number into the subject line before the message is sent?
I mean something similar with helpdesk tickets, because I would like to create the possibility for the senders, to make further refference about a speciffic message using it's counter number provided by postfix server.
I recently modified sendmail.cf to use a third party SMTP server to send emails. It works great. But when I run sendmail from the command line, I have to specify the -C flag and force feed it the location of my sendmail.cf, or else it doesn't work.
So in other words, the following works great:
However, if I don't specify the -C flag, sendmail doesn't consider what's in the sendmail.cf and barfs:
I don't run sendmail as a daemon. I'm only using it to send emails. I know my modifications of sendmail.cf are correct because it works perfectly when I use the -C flag. I searched my disk to see if I could find another sendmail.cf on the machine and only the one in /etc/mail came up.
Why sendmail is not reading my sendmail.cf?
I'm running Sendmail version 8.14.2 on Fedora Core 8.
Anyone know a simple command line to check for a specific email - by subject - on an SSL secured IMAP server?
View 2 Replies View RelatedI have my stereo plugged into the line in on my computer. When I wanted to listen to something on it (like, say, FM radio), I could just go into the mixer, unmute the line in on the playback, and I could listen to whatever was streaming in over my computer speakers.
Now, the helpful ALSA mixer has been replaced by a PulseAudio mixer that has a REALLY helpful single "master" channel....and that's it. Does anyone have any idea how to allow the line in to simply play back through master using PulseAudio? I shouldn't need to use an additional app for this, ALSA used to just play it back happily before... Even the alsamixer on the command line now has been captured by PulseAudio, so it just shows "master" for playback.
I've got virtualbox running on 10.04. I install windows xp on it and everything goes smoothly. I installed it from an iso of XP, however, on the very first boot it says "Windows could not start normally" and gives me the option of safe mode, networking, or starting normally. No matter what I pick it just blue screens for a split second and restarts.
View 2 Replies View RelatedIm unable to send mail using mailx or sendmail. The sendmail daemon is running.
View 1 Replies View RelatedI have questions about mail,
I am using following command on my linux account of my compnay
mail -s 'Hi' username@gmail.com
But I dont receive any emails, where as did not receive any error while executing the above command, so whats going on and what is happening.
what email id do mail use to send the email by default. Is there any way or command to print this by default user id.
I am using postfix as spam Mailscanner to protect my mail server running sendmail. The problem is that when I forward an email from MailScanner mail me back with the following error:
<postmaster@localhost.@mydomain.com.>... Real domain name required for sender address (in reply to MAIL FROM command))
Jul 27 13:15:59 smtp postfix/local[28465]: C68AC1000001: to=<root@smtp.mydomain.com>,
[code]....
We are running CentOS 5.4 x86 on ESX 4 Server. We have a busy Help Desk, a Forum and several name-based websites running. Weve been using CentOS for this 'purpose for several years (different versions) and so far we have never had a problem. On Saturday, I applied all the latest updates including the Kernel updates. I rebooted the server and all seemed well until Sunday morning when I didn't get my Logwatch in the mail. Then I got a telephone call from a customer asking me why I hadn't responded to a Trouble Ticket he had created on Saturday afternoon (creating a TT sends an email via sendmail to all the support staff). I did a few tests and sendmail has just stopped working. The Logwatch had been created and had been sent to root, but all mail for root is redirected to my Mail Server on e different box (GroupWise). There was nothing wrong with the mail server, but sendmail has just stopped.
Fortunately I had created a snapshot before I applied the updates, so I reverted back to the snapshot and mail started working again, but I lost 2 days info because I had run the backup before I applied the patches. Now I see there are 132 Updates available, but there is obviously a problem somewhere in there!
I recently setup an email server on Fedora Core (14). Sendmail is running and I am trying to authenticate from a client pc using imaps. I installed Cyrus-imap and it is running and listening on 993. When I try to login, it doesn't accept authentication even though I verified the user's password is correct. (tested with ssh)Is there something I have to do with Cyrus or on the server to allow connections to email? I have not used Cyrus before. I am attempting to access my mail folders via Sendmail and did not make mailboxes in Cyrus. I did allow imaps through the firewall.
View 1 Replies View RelatedIm not able to find good response on this from google, urgent help required.
While im looking at my smtp server log at /var/log/maillog, im having these two errors for which im unable to find the reason.
1)Could not open inline file /etc/MailScanner/reports/en/inline.sig.txt, No such file or directory
2)did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA
After searching the forum I could not find a clear answer to my question so I am giving it a try...
I have installed a LAMP server with Postfix as mail server. The scripts send email as user www-data using the mail server on the same machine.
However, the email got rejected by external mail servers (failed reverse DNS check) so I setup a mail server that meets all needed requirements.
Now I would like to use this second server instead of the mail server on the LAMP server. I found that this could be done with changing sendmail settings in php.ini (I think).
However I am not sure how that will go: www-data is no actual user on the new email server (which requires authentication before sending). Do I need to create a new user on the email server or change the settings in php.ini to match an existing user?
I have users [URL] unable to send email to [URL]. [URL] user also unable to send email to [URL]. But both email addresses are fine as they can receive email from others or from [URL] and [URL]. I able to telnet mail server 110 and 25, no problem. Version: ESMTP Sendmail 8.12.10
Mail Log:
Feb 23 11:36:35 mail sendmail[16228]: o1N3aZxt016215: to=<xxx1@gas.com>, ctladdr=<xxx@abc.com> (501/501), delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=442918, relay=gas.com, dsn=5.1.2, stat=Host unknown (Name server: gas.com: no data known)
[code]....
We're running a sendmail server on a fedora core 9 which we've configured recently. The problem is, the server is working fine but there are some e-mails that enter our server but doesn't get forwarded to the user.
Quote:
Quote:
Here it says "stat=Sent" but nothing from the above mail address has been received on the client's inbox. We've experienced this with Microsoft Outlook, Outlook Express and Thunderbird alike so far with Two(2) of our user accounts.
I'm new to send mail. I have a server with a public address and domain name. But I only want to implement a small sendmail network on our 20-user LAN. Can I turn my public server into a sendmail server? Are there any simple step-by-step instructions for this?
View 1 Replies View RelatedI am trying to setup a sendmail server on my dedicated server. It was pre-configured to use exim from cpanel. Is it possible to use exim for all emails from a a certain domain i setup on the server and sendmail for others?
ex.
domain1.com -> exim
domain2.com -> sendmail
If it is possible can someone let me know how i would go about doing this? If it is not how would i disable exim and use sendmail for all mail?
I'm setting up a full server configuration on Fedora, moving it from Mandriva which sadly faces a rather uncertain future. Things are going well and I will be ready (and more familiar with Fedora) in time to upgrade to Fedora 15.
What I have done so far in regard to networking setup:
I first removed Network Manager and replaced it with the network service (chkconfig --level 25 network on). That put an end to the overwriting of /etc/hosts, which now reads simply:
Having some issues setting up sendmail on a (basically) blank RHEL 5.5 server setup. My ultimate goal is to be able to automagically send logs / errors / notifications to ourselves from the server.
Our basic setup is a Win 2003 domain with exchange running on mail.domain.com.au.
I've edited the '/etc/mail/sendmail.mc' and added the :
Code:
line to it.
Also added the domain (domain.com.au) to the '/etc/mail/local-host-names' files
Also edited submit.mc and added
Code:
When I try and send a mail from root or a test user to one of the domain accounts, it seems to go fine, i.e no errors are reported but it never gets delivered.
From the mail logs:
Code:
So it seems to be sent to the queue no problems and when I check the queue :
Code:
Total requests: 0
Not nothing ever gets received. Am I missing something? I have read and read and read but dont seem to be getting any furthur.
So in the end this server doesn't need to do anything except be able to send mail from root to an external mail address.
I am trying to set up a mail server on centos5 using sendmail and dovecot, and eventually spamassassin and some antivirus filter as well. I'd also like to get the proper secure auth mechanism set up at some point too. But for starters, I've been having a lot of difficulty trying to even connect to the mail server from a client computer in the local network. I installed Eudora on the client and after some tweaking in dovecot I was able to connect to the mail server, but then when I try to send an email I get a "connection refused" error, with nothing being logged on the server that I can see.
The last time I set up a mail server was Fedora Core 2, so the configuration files have changed a bit to say the least, and I can't really refer back to those to set up this new server. Does anybody know of a good step-by-step doc on getting the mail server going? I've read the man pages and other various readme's, but these really only list out the available options with no really good explanation of what needs to be done to get the mail server going. If there isn't a full write-up on how to do this, I'll put something together when I'm finished so others can use it in the future.
i have configured sendmail server in my lan and it is working fine for me.but there is one little problem for me. i want mails send sunita should be received by vinita.sunita and vinita both are normal users on same pc.
for this i made entry in
Code:
/etc/aliases sunita: vinita
I've got a server set up with Debian. The problem is that my ISP doesn't allow usage of port 25 (as I understand a lot of ISP's don't).I have PHP scripts hat use the mail() function to send e-mails through the Sendmail application.So, my question is: How can I relay messages sent to sendmail to an external SMTP server (like Google Mail, for example)? Would this be easier to do in the PHP configuration, or on the Sendmail side of things?I've used PEAR extensions in PHP to achieve this before, but scripts downloaded from the Internet generally just use the basic mail() function, and it would be a real pain to modify them all.
View 2 Replies View Related