Some mail coming to my postfix server will need to be delivered local and the rest to an internal mail server.
The internal mail server is mail.example.com where there is no bob@example.com but there is a sam@example.com.
Is it possible to configure postfix to do this?
I got a weird postfix setup question? This is a separate server to the one I posted about earlier today.
I need to setup a postfix server which will accept emails for local know address (full addresses) and deliver them straight to the users maildir.
Any unknown addresses (however for the same domain), needs to be relayed to another server.
This is a bit of a special setup as there is no fixed Internet connection to the server. So the plan is that local email get delivered straight away whilst emails to the same @domain, but that doesn't exist in the user tables get put in the hold queue and is later relayed to server number 2 when a connection is available.
I am using mysql to retrieve all my settings into postfix.
I'm trying to setup postfix (or exim, I don't mind which), so I can move away my last remaining PC from Windows.I've tinkered with Postfix for good part of a month and I can get it to accept emails using SMTP and post them to a virtual mailbox based on MySQL tables. And it rejects mail addressed to local email addresses that it can't find in the table.
First question (or problem.) I've set up Postfix to relay email it cannot deliver locally such as is the case when you send out an email. My remote host requires authentication. How can I set this up?
Second question: I want to force my clients to use either AUTH, TLS or SSL, and not allow anonymous connections (to prevent an open relay server.) How do I set that up without interfering with the smarthost setting? The smarthost login is not one of my clients, it's a pre-determined login and password that is solely used for the email relaying aspect.
I have a mail server running Postfix and the problem I'm running into is that when trying to send mail, I get a "relay access denied" error.Inside my main.cf, I did not specify 'smtpd_recipient_restrictions' so by default, the variable is:
Code:
smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
The 'mynetworks' variable looks like this:
[code]....
I have a linux box on my DMZ with postfix on it. I have exchange on our internal LAN on 10.152.0.104.
View 6 Replies View Relatedi need to configure postfix on centos to relay email from the internet to the Exchange Server and i also need that emails sent from the exchange within the same domain be sent to postfix then resent to exchange because i have spamassassin and clamav installed on centos to filter all incoming and outgoing mails ...
View 1 Replies View Relateddistro = debian 5
when i tried to send to other domain, i will get "Relay access denied"
below are my configs
main.cf
Code:
# postconf -n
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
append_dot_mydomain = no
[Code].....
I'm trying to set up my postfix server to relay mail (via a php cms) using Gmail's smtp on my account, but for some reason, Gmail returns an error code that StartTLS must be sent first, my postfix main.cnf file can be found at pastebin, because of this forum's text length I cannot paste my postfix main.cnf file as can be seen I have everything set and configured for Gmail, but postfix (for some unseen reason) can not send StartTLS. [URL].
View 4 Replies View RelatedI'm using Ubuntu Server 10.04 and I can successfully relay mail generated by php scripts through an Exchange server.What I want to do is accept incoming mail from the Internet through postfix and relay it to the Exchange server but I want all mail that is not addressed to ...@mydomain.edu to be discarded.
View 3 Replies View RelatedI've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
I would like to setup postfix to act as a relay for the outgoing mails of a couple of servers each serving it's own domain.The mails we are talking about are standard administrative emails like user registration, password reset request. The volume of those mails will naturally grow as the site grows. Which for me poses the problem that depending on the growth of the site you will sooner or later hit the quotas imposed by (my otherwise preferred) providers like GMail or smtp.com.
So what I need is a mail relay that will only accept mails from authenticated clients from hosts in its access list and relay their mail without restrictions. Is that possible with postfix? What has to be changed in the config and what are the pitfalls?
my server is Redhat as 5 + postfix +Dovecot .when i use smtp to send mail，it can't to send,the system return "relay access denied" ? This is my maini.cf
Code:
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
[Code].....
My issue is that i'm trying to send emails with postfix and gmail as the mail relay,i'm trying to send emails to my self by sendmail -bv user@gmail.com
In the logs, i can understand that it been delivered to the destination,
taken from: /var/log/mail.log:
Apr 30 00:05:23 moni postfix/pickup[10490]: 9C7552170C: uid=0 from=<root>
Apr 30 00:05:23 moni postfix/cleanup[10495]: 9C7552170C: message-id=<20110429210523.9C7552170C@moni.localdomain>
Apr 30 00:05:23 moni postfix/qmgr[10491]: 9C7552170C: from=<root@moni.localdomain>, size=283, nrcpt=1 (queue active)
code....
When login in my gmail account i can't see nothing under the sent / inbox / spam folder.
it's seems like the mail are been sent.. but nothing is happening.
In my network I only have one machine that is configured to send email outside the network. How do I instruct my local copy of sendmail to use that server as a relay?
View 3 Replies View RelatedPostfix (version 2.5.5-1.1 in a debian 5 machine) isn't delivering messages to a certain account mailbox (in this case testing@domain.com).
View 2 Replies View RelatedI am a first timer in setting up a mail server. As I heard that Postfix is a very simple mail server to configure I decided to use it on the same server where we have our squid. It seems that it is really simple enough because immediately after configuring,I can send and receive internal e-mails and send external emails. As I replied to the external emails that I received myself I found out that all of them just landed on the mail queue and this is where my problem starts. I cannot make Postfix deliver the messages to my outlook mailbox. By the way, I am sending the emails the through outlook also.
View 109 Replies View RelatedTwo exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
I was never confident with postfix, but used it for several years now on my own server. I even noted the exact config used. But my old server crashed and I have to build fast a news one and I don't receive mails anymore. Here is the log message when trying to send to me from gmail:
Jun 4 08:06:34 ks3095514 postfix/smtpd[4008]: connect from mail-pw0-f50.google.com[209.85.160.50]
Jun 4 08:06:34 ks3095514 postfix/smtpd[4008]: NOQUEUE: reject: RCPT from mail-pw0-f50.google.com[209.85.160.50]: 554 5.7.1 <jdd@dodin.net>: Relay access denied; from=<lesrevesdeness@gmail.com> to=<jdd@dodin.net> proto=ESMTP helo=<mail-pw0-f50.google.com>
Jun 4 08:06:35 ks3095514 postfix/smtpd[4008]: disconnect from mail-pw0-f50.google.com[209.85.160.50]
The main.cf file is the openSUSE default one (see below). Part of my problems seems to come from the reverse. I *could once* receive one test messsage to " ks3095514.kimsufi.com" (the default reverse/domain name) (below, commented out), but not for my own domain (dodin.org). Most of the time the only necessary lines are mydomain, myhostname, myorigin and mydestination, but this don't work anymore. New defaults??. local (from and to the server) mail works, root can send to jdd and I read it from home.
mydomain = dodin.org
inet_protocols = all
biff = no
mail_spool_directory = /var/mail
canonical_maps = hash:/etc/postfix/canonical
virtual_alias_domains = hash:/etc/postfix/virtual
relocated_maps = hash:/etc/postfix/relocated
transport_maps = hash:/etc/postfix/transport
sender_canonical_maps = hash:/etc/postfix/sender_canonical
masquerade_exceptions = root .....
When attempting to check my postfix install by using telnet to send an email to an address outside my local network, I get a relay access denied error.
This is how I attempted to send an email
Code:
telnet my_server 25
helo my_server
mail from: me@my_server
rcpt to: me@gmail.com
[Code].....
I currently have a postfix / dovecot server running on one ubuntu server with nullmailer relaying webmail on a different server. This is currently working except the mail server is rejecting incorrect addresses which results in the messages being stuck in the nullmailer queue on the webmail server. Is it possible to force postfix to accept and manage all relayed messages from webmail, or is it possible for the nullmailer to manage the bounced messages correctly?
View 1 Replies View RelatedI just finish install & setup postfix & spamassasin. I can send & received email from my local area network. i already install webmail client & I can send received. When using my pda from outside my network I can received but I just can send email to my domain only. For other domain it's error relay access denied. Here my postfix configuration.
View 4 Replies View RelatedWe are using postfix for relaying our internal system generated mail to other domain through google apps. All client servers able to send mail through the postfix server, only user of local postfix server(root, etc) unable to send mail with command like mutt, mail.My detail configuration given below:
Code:
postconf -n
output
Code:
alias_maps = hash:/etc/aliases
command_directory = /usr/sbin
config_directory = /etc/postfix
[code]....
I've search high and low.. does anyone know how to configure Postfix/Dovecot to use another SMTP server (i.e. smtp.comcast.net) as my ISP blocks port 25?
View 2 Replies View RelatedHas anyone managed to get postfix working using virgin media as a relay?
is there any alternative if thats my ISP? they wont give out static IP
My postfix is ok with receiving emails but i can send mail to my domain only [URL] When I want to send to other domains i receive this error (in the maillog):
Quote:
postfix/smtpd[14172]: NOQUEUE: reject: RCPT from 93-46-46-73.ip106.fastwebnet.it[93.46.46.73]: 554 5.7.1 <giannileggio@shoppeo.com>: Relay access denied; from=<info@sampledomain.com> to=<giannileggio@shoppeo.com> proto=ESMTP helo=<[36.234.52.97]>
it is the same via thunderbird or via telnet. This is my configuration
Quote:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
[code]....
I used 'sampledomain' instead of my real domain
I have setup up an Opensuse as a simple we/application server.It handles requests for various things and will need to send out email on occasion for things like password reset requests, information / warnings etc. etc.This is a standard OPenSuse 11.x install with defaults so it comes with Postfix as the mta.I do not want a mail server I just want to send out via my clients mail server which is hosted exchange rackspace, which simply requires SMTP auth to do so.What would be the proper way to do this so ALL e-mail send from this machine, regardless of account like WWWRun or when logged in and sending from the command line has the same sender all the time.
View 6 Replies View RelatedFor about a week now I've been seeing mass attempts to relay through postfix and login to dovecot from the same 2 addresses, none are successful due to how postfix/dovecot are configured and I wouldn't be overly worried but my isp have picked up on it and are nagging at me
What ways do people go about just dropping connection attempts from offending addresses/ranges when stuff like that happens? An ideal thing would be something that detects repeated failed attempts from a host or range and subsequently ignore/ban them, perhaps for a specified length of time, something along the lines of denyhosts and fail2ban for ssh would be great Don't know if there's anything out there or just a plain tried and trusted method anyone might use for stuff like this, if not a hint on the most appropriate way to go about it 'manually' would do
On my system, I have built my own tunneling protocol, where I relay packets over a non-standardized but verified medium. What I do is capture the packets using iptables and NFQUEUE, relay them over my medium, and at the other end I reinject them using raw sockets. The packet going into the tunnel is exactly the same as the one coming out, verified. The problem is that this doesn't work for ICMP Ping (Echo Request) if the destination of the ping is the same as the tunnel endpoint. If the destination is not the same as the tunnel endpoint, the ping packet is rerouted and arrives as it should at the receiver, and the ping reply comes back to the sender. Does anyone know whats going on? Isn't it possible to send raw icmp to yourself? If not, anyone have an idea what I should do instead?
View 1 Replies View RelatedThis is a transcript I get emailed at least once every day, usually about 3 to 10 a day recently.
Transcript of session follows.
SMTP server: errors from unknown[ip address]
<boring stuff snipped>
In: RCPT TO: <server@my domain>
Out: 550 5.1.1 <server@my domain>: Recipient address rejected: User unknown in local recipient table
Session aborted, reason: lost connection Now I cannot seem to find anything via Google, as when I put "server@" anywhere in the string, I just get web hosting or other kroomst. The emails usually come from legit places, usually hotels. Does this mean they are sending bad emails, i.e. they have a Trojan/worm, or is this a live hack attempt?. I believe the later, as I might get upto 3 domains from the one ip address, which is always, NOT associated with the listed domain. Not causing me any issues, except I have been getting a lot recently.
I cannot get exim4 to actually deliver any "local delivery only; not on a network".But whatever I do in the config, all mail gets frozen with entries in the log file like:"root@empty R=nonlocal: Mailing to remote domains not supported"Maybe the problem is that there is no fqdn for the computer (and will never be). How can I enable local mail delivery?
View 14 Replies View Related